Gas Turbines in Hydrofoil Seacraft

1962 ◽  
Author(s):  
Irwin Palmer
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Background Information ◽  
Marine Environments ◽  
Propulsion Systems ◽  
Factors Affecting

This paper describes the use of gas-turbine propulsion systems in hydrofail seacraft. Background information on the early hydrofoil developments is presented, as well as discussions of the factors affecting choice of power plants, economics of operation, and the practical considerations involved with respect to marine environments, installation requirements, and engine characteristics. Descriptions of turbine-powered hydrofoil craft are also included.

scholarly journals Feasibility of a Helium Closed-Cycle Gas Turbine for UAV Propulsion

2020 ◽  
Vol 11 (1) ◽  
pp. 28
Author(s):  
Emmanuel O. Osigwe ◽  
Arnold Gad-Briggs ◽  
Theoklis Nikolaidis
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Pressure Ratio ◽  
Low Noise ◽  
Closed Cycle ◽  
Propulsion Systems ◽  
Component Design ◽  
Readiness Level ◽  
Aerial Vehicle ◽  
Turbine Design

When selecting a design for an unmanned aerial vehicle, the choice of the propulsion system is vital in terms of mission requirements, sustainability, usability, noise, controllability, reliability and technology readiness level (TRL). This study analyses the various propulsion systems used in unmanned aerial vehicles (UAVs), paying particular focus on the closed-cycle propulsion systems. The study also investigates the feasibility of using helium closed-cycle gas turbines for UAV propulsion, highlighting the merits and demerits of helium closed-cycle gas turbines. Some of the advantages mentioned include high payload, low noise and high altitude mission ability; while the major drawbacks include a heat sink, nuclear hazard radiation and the shield weight. A preliminary assessment of the cycle showed that a pressure ratio of 4, turbine entry temperature (TET) of 800 °C and mass flow of 50 kg/s could be used to achieve a lightweight helium closed-cycle gas turbine design for UAV mission considering component design constraints.

scholarly journals Clear Skies Ahead

2016 ◽  
Vol 138 (06) ◽  
pp. 38-43
Author(s):  
Lee S. Langston
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Electrical Power ◽  
Vital Role ◽  
Medium Size ◽  
Steady Increase ◽  
Innovative Design ◽  
Turbine Engine ◽  
Boom And Bust

This article discusses various fields where gas turbines can play a vital role. Building engines for commercial jetliners is the largest market segment for the gas turbine industry; however, it is far from being the only one. One 2015 military gas turbine program of note was the announcement of an U.S. Air Force competition for an innovative design of a small turbine engine, suitable for a medium-size drone aircraft. The electrical power gas turbine market experienced a sharp boom and bust from 2000 to 2002 because of the deregulation of many electric utilities. Since then, however, the electric power gas turbine market has shown a steady increase, right up to present times. Coal-fired plants now supply less than 5 percent of the electrical load, having been largely replaced by new natural gas-fired gas turbine power plants. Working in tandem with renewable energy power facilities, the new fleet of gas turbines is expected to provide reliable, on-demand electrical power at a reasonable cost.

Assessment of the Potential of Combined Micro Gas Turbine and High Temperature Fuel Cell Systems

2002 ◽  
Author(s):  
Dieter Bohn ◽  
Nathalie Po¨ppe ◽  
Joachim Lepers
Keyword(s):  
Fuel Cells ◽  
High Temperature ◽  
Fuel Cell ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Advanced Materials ◽  
Cell Systems ◽  
Micro Gas Turbine ◽  
Technological Assessment

The present paper reports a detailed technological assessment of two concepts of integrated micro gas turbine and high temperature (SOFC) fuel cell systems. The first concept is the coupling of micro gas turbines and fuel cells with heat exchangers, maximising availability of each component by the option for easy stand-alone operation. The second concept considers a direct coupling of both components and a pressurised operation of the fuel cell, yielding additional efficiency augmentation. Based on state-of-the-art technology of micro gas turbines and solid oxide fuel cells, the paper analyses effects of advanced cycle parameters based on future material improvements on the performance of 300–400 kW combined micro gas turbine and fuel cell power plants. Results show a major potential for future increase of net efficiencies of such power plants utilising advanced materials yet to be developed. For small sized plants under consideration, potential net efficiencies around 70% were determined. This implies possible power-to-heat-ratios around 9.1 being a basis for efficient utilisation of this technology in decentralised CHP applications.

Dynamic Behavior of a Solar Hybrid Gas Turbine System

2015 ◽  
Author(s):  
Christian Felsmann ◽  
Uwe Gampe ◽  
Manfred Freimark
Keyword(s):  
System Dynamics ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Thermal Power ◽  
Commercial Application ◽  
Worst Case ◽  
Electric Generator ◽  
New Findings ◽  
Component Development

Solar hybrid gas turbine technology has the potential to increase the efficiency of future solar thermal power plants by utilizing solar heat at a much higher temperature level than state of the art plants based on steam turbine cycles. In a previous paper the authors pointed out, that further development steps are required for example in the field of component development and in the investigation of the system dynamics to realize a mature technology for commercial application [1]. In this paper new findings on system dynamics are presented based on the simulation model of a solar hybrid gas turbine with parallel arrangement of the combustion chamber and solar receivers. The operational behavior of the system is described by means of two different scenarios. The System operation in a stand-alone electrical supply network is investigated in the first scenario. Here it is shown that fast load changes in the network lead to a higher shaft speed deviation of the electric generator compared to pure fossil fired systems. In the second scenario a generator load rejection, as a worst case, is analyzed. The results make clear that additional relief concepts like blow-off valves are necessary as the standard gas turbine protection does not meet the specific requirements of the solar hybrid operation. In general the results show, that the solar hybrid operational modes are much more challenging for the gas turbines control and safety system compared to pure fossil fired plants due to the increased volumetric storage capacity of the system.

Strength Design and Reliability Evaluation of a Hybrid Ceramic Stator Vane for Industrial Gas Turbines

1995 ◽  
Vol 117 (2) ◽  
pp. 245-250 ◽  
Author(s):  
K. Nakakado ◽  
T. Machida ◽  
H. Miyata ◽  
T. Hisamatsu ◽  
N. Mori ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Metal Structure ◽  
Reliability Evaluation ◽  
Combustion Gas ◽  
Strength Design ◽  
Stator Vane ◽  
Industrial Gas Turbines ◽  
Hybrid Ceramic

Employing ceramic materials for the critical components of industrial gas turbines is anticipated to improve the thermal efficiency of power plants. We developed a first-stage stator vane for a 1300°C class, 20-MW industrial gas turbine. This stator vane has a hybrid ceramic/metal structure, to increase the strength reliability of brittle ceramic parts, and to reduce the amount of cooling air needed for metal parts as well. The strength design results of a ceramic main part are described. Strength reliability evaluation results are also provided based on a cascade test using combustion gas under actual gas turbine running conditions.

scholarly journals Considerations regarding the anti-icing system for the ship propulsion plant with gas turbine

2021 ◽  
Vol 286 ◽  
pp. 04013
Author(s):  
George Iulian Balan ◽  
Octavian Narcis Volintiru ◽  
Ionut Cristian Scurtu ◽  
Florin Ioniță ◽  
Mirela Letitia Vasile ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Energy Flow ◽  
Gas Turbines ◽  
Power Plants ◽  
Compressed Air ◽  
Ambient Temperatures ◽  
Foreign Objects ◽  
Technical Solutions ◽  
Gas Turbine Power Plant

Vessels that have navigation routes in areas with ambient temperatures that can drop below + 5 [°C], with a relative humidity of over 65%, will have implemented technical solutions for monitoring and combating ice accumulations in the intake routes of gas turbine power plants. Because gas turbines are not designed and built to allow the admission of foreign objects (in this case - ice), it is necessary to avoid the accumulation of ice through anti-icing systems and not to melt ice through defrost systems. Naval anti-icing systems may have as a source of energy flow compressed air, supersaturated steam, exhaust gases, electricity or a combination of those listed. The monitoring and optimization of the operation of the anti-icing system gives the gas turbine power plant an operation as close as possible to the normal regimes stipulated in the ship's construction or retrofit specification.

FFG7 Class Frigate and DD963 Class Destroyer Marine Gas Turbine Propulsion Systems Maintenance and Operational Training Facility

1985 ◽  
Vol 22 (01) ◽  
pp. 1-27
Author(s):  
Ralph J. Della Rocca ◽  
John D. Stehn
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Mechanical Equipment ◽  
Propulsion Systems ◽  
Electrical Systems ◽  
Training Facility ◽  
Hands On ◽  
Systems Maintenance ◽  
And Control ◽  
Major Emphasis

The need for a gas turbine training facility became apparent with the introduction into the U.S. Navy fleet of the first ships of the FFG7 Frigate and DD963 Destroyer Classes with gas turbine propulsion plants. This facility, constructed at the Great Lakes Naval Training Center, provides "hands-on" training for maintenance and operation of marine gas turbines and associated propulsion plant components and controls and their piping and electrical systems. The Navy intends to train at this facility approximately 1000 personnel per year in the use of their latest and newest propulsion plants. The design of the facility reproduces as closely as possible the existing machinery and control spaces of the two different classes of ships and integrates them into a single main building with the school and the mechanical equipment wings. This paper presents an overview of the need for well-trained, qualified naval personnel to man the expanding fleet of marine gas turbine propulsion systems, existing training facilities and the various stages in the development of the FFG7/DD963 Gas Turbine Maintenance and Operational Training Facility. In regard to the facility, the paper discusses the planning and managing of the project; development of the designs for the building and propulsion plants; construction of the building facilities and FFG7 plant; the fabrication, transportation and erection of the FFG7 within the building; and the testing and operation of the FFG7 plant since light-off. Major emphasis is given to the FFG7 plant since the DD963 plant is being reconsidered in conjunction with the CG47 upgrading and is awaiting a decision to proceed.

Principles of Imitation for the Loading of the Test Bench for Gas Turbines of Gas Pumping Units, Adequate to Real Conditions

2021 ◽  
Vol 13 (24) ◽  
pp. 13678
Author(s):  
Anton Petrochenkov ◽  
Aleksandr Romodin ◽  
Vladimir Kazantsev ◽  
Aleksey Sal’nikov ◽  
Sergey Bochkarev ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Simulation Models ◽  
Turbine Rotor ◽  
Operating Conditions ◽  
Automation System ◽  
Model Free ◽  
Gas Pumping ◽  
Pumping Units

The purpose of the study is to analyze the prospects for the development of loading methods for gas turbines as well as to develop a mathematical model that adequately describes the real operating conditions of the loading system at various loads and rotation speeds. A comparative analysis of the most common methods and technical means of loading the shafts of a free turbine at gas turbine plants intended for operation as part of gas pumping units is presented. Based on the results of the analysis, the expediency of using the loading model “Free Power Turbine Rotor–Hydraulic Brake” as a load simulation is shown. Recommendations for the creation of an automation system for the load testing of power plants have been developed. Mathematical models and Hardware-in-the-Loop simulation models of power plants have been developed and tested. One of the most important factors that predetermine the effectiveness of the loading principle is the possibility of software implementation of the loading means using software control systems that provide the specified loading parameters of the gas turbine.

scholarly journals Gas Turbine Propulsion Systems for Small Naval Ships

1980 ◽  
Author(s):  
A. W. McCoy
Keyword(s):  
Gas Turbine ◽  
Thermal Efficiency ◽  
Gas Turbines ◽  
Specific Weight ◽  
Advanced Technology ◽  
Propulsion Systems ◽  
Performance Levels ◽  
Mission Effectiveness

Analysis of gas turbine-powered naval ships of 500- to 4000-ton size has been performed for ocean escort and patrol missions with performance levels appropriate to gas turbines of both current and advanced technology. The use of gas turbine systems allows the realization of high mission effectiveness with relatively small ships. For advanced marine gas turbines, the most significant ship benefit would result from increased thermal efficiency of cruise engines by means of regenerative cycles. A secondary improvement, particularly for high dash speeds, would be the reduction of specific weight for dash engines. With such advanced gas turbines, ship sizes may be further reduced for given mission capabilities.

scholarly journals Reheat and Regenerative Gas Turbines for Feed Water Repowering of Steam Power Plant

1995 ◽  
Author(s):  
G. Negri di Montenegro ◽  
M. Gambini ◽  
A. Peretto
Keyword(s):  
Steam Turbine ◽  
Gas Turbine ◽  
Flow Rate ◽  
Gas Turbines ◽  
Power Plants ◽  
Feed Water ◽  
Brayton Cycle ◽  
Energy Integration ◽  
Steam Power ◽  
Steam Power Plants

This study is concerned with the repowering of existing steam power plants (SPP) by gas turbine (GT) units. The energy integration between SPP and GT is analyzed taking into particular account the employment of simple and complex cycle gas turbines. With regard to this, three different gas turbine has been considered: simple Brayton cycle, regenerative cycle and reheat cycle. Each of these cycles has been considered for feed water repowering of three different existing steam power plants. Moreover, the energy integration between the above plants has been analyzed taking into account three different assumptions for the SPP off-design conditions. In particular it has been established to keep the nominal value for steam turbine power output or for steam flow-rate at the steam turbine inlet or, finally, for steam flow-rate in the condenser. The numerical analysis has been carried out by the employment of numerical models regarding SPP and GT, developed by the authors. These models have been here properly connected to evaluate the performance of the repowered plants. The results of the investigation have revealed the interest of considering the use of complex cycle gas turbines, especially reheat cycles, for the feed water repowering of steam power plants. It should be taken into account that these energy advantages are determined by a repowering solution, i.e. feed water repowering which, although it is attractive for its simplicity, do not generally allows, with Brayton cycle, a better exploitation of the energy system integration in comparison with other repowering solutions. Besides these energy considerations, an analysis on the effects induced by repowering in the working parameters of existing components is also explained.

Sign in / Sign up

Export Citation Format

Share Document