Multi-Modal Vibration Energy Harvesting Using a Trapezoidal Plate

2011 ◽  
Author(s):  
Mustafa H. Arafa
Keyword(s):  
System Performance ◽  
Energy Harvester ◽  
Natural Frequencies ◽  
Vibration Energy ◽  
Vibration Modes ◽  
Vibration Energy Harvesting ◽  
Energy Harvesters ◽  
Trapezoidal Plate ◽  
Plate Geometry ◽  
Modal Vibration

Vibration-based energy harvesters are usually designed to exhibit natural frequencies that match those of the excitation for maximum power output. This has spurred interest into the design of devices that respond to variable frequency sources. In this work, an electromagnetic energy harvester in the form of a base excited trapezoidal plate is proposed. The plate geometry is designed to achieve two closely spaced vibration modes in order to harvest energy across a broader bandwidth. The ensuing bending and twisting vibrations are utilized in this capacity by placing a magnet on the plate tip that moves past a stationary coil. A dynamic model is presented to predict the system performance and is verified experimentally.

Multi-Modal Vibration Energy Harvesting Using a Trapezoidal Plate

2012 ◽  
Vol 134 (4) ◽  
Author(s):  
Mustafa H. Arafa
Keyword(s):  
System Performance ◽  
Energy Harvester ◽  
Natural Frequencies ◽  
Vibration Energy ◽  
Vibration Modes ◽  
Vibration Energy Harvesting ◽  
Energy Harvesters ◽  
Trapezoidal Plate ◽  
Plate Geometry ◽  
Modal Vibration

Vibration-based energy harvesters are usually designed to exhibit natural frequencies that match those of the excitation for maximum power output. This has spurred interest into the design of devices that respond to variable frequency sources. In this work, an electromagnetic energy harvester in the form of a base excited trapezoidal plate is proposed. The plate geometry is designed to achieve two closely spaced vibration modes in order to harvest energy across a broader bandwidth. The ensuing bending and twisting vibrations are utilized in this capacity by placing a magnet on the plate tip that moves past a stationary coil. A dynamic model is presented to predict the system performance and is verified experimentally.

Design of a Vibration-Based Energy Harvester With Adjustable Natural Frequency

2010 ◽  
Author(s):  
Mohamed O. Mansour ◽  
Mustafa H. Arafa ◽  
Said M. Megahed
Keyword(s):  
Energy Harvesting ◽  
Natural Frequency ◽  
Piezoelectric Layer ◽  
System Performance ◽  
Energy Harvester ◽  
Natural Frequencies ◽  
Opposite Polarity ◽  
Energy Harvesters ◽  
Close Proximity ◽  
Tip Mass

The recent years have witnessed a wealth of research on energy harvesting technologies. To maximize the output power, vibration-based energy harvesters are normally designed to have natural frequencies that match those of the excitation. This has spurred interest into the design of devices that possess tunable natural frequencies to cope with sources which exhibit varying frequencies. In this work, an energy harvester is proposed in the form of a base excited cantilever treated with a piezoelectric layer. The cantilever carries a tip mass in the form of a magnet which is placed in close proximity to another magnet with opposite polarity. Different values of axial tensions, and hence different natural frequencies, are obtained by adjusting the gap between the magnets. A dynamic model to predict the system performance is presented and verified experimentally. Based on the findings of this paper, natural frequencies ranging from 3.19–12 Hz were achieved.

Design and Optimization of Multi-Modal Vibration Energy Harvesters Using Slitted Beams

2014 ◽  
Author(s):  
Mina Dawoud ◽  
Hesham Hegazi ◽  
Mustafa Arafa
Keyword(s):  
Permanent Magnets ◽  
Natural Frequencies ◽  
Geometrical Parameters ◽  
Vibration Modes ◽  
Cantilever Beams ◽  
Outer Contour ◽  
Design And Optimization ◽  
Energy Harvesters ◽  
Modes Of Vibration ◽  
Modal Vibration

The objective of this work is to design cantilever beams possessing close vibration modes to enable harvesting energy from variable frequency sources of base motion. In this context, the geometry of two-dimensional cantilever beams is designed to obtain closely spaced harvestable modes of vibration. A number of internal slits are made inside the beam, whose outer contour and mass distribution are altered in such a way to obtain the desired frequency spacing. The beam carries two permanent magnets that oscillate past stationary pickup coils in order to convert the mechanical motion into electric power. Optimum design results of the shape and geometrical parameters of the system are presented towards controlling the natural frequencies, their spacing and the output power. Simulations of the system dynamics are supported by experimental validation.

Experimental characterisation of dual-mass vibration energy harvesters employing velocity amplification

2016 ◽  
Vol 27 (20) ◽  
pp. 2810-2826 ◽  
Author(s):  
Ronan Frizzell ◽  
Gerard Kelly ◽  
Francesco Cottone ◽  
Elisabetta Boco ◽  
Valeria Nico ◽  
...  
Keyword(s):  
Frequency Response ◽  
Energy Harvester ◽  
Wireless Sensor ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Energy Harvesters ◽  
Network Applications ◽  
Higher Power ◽  
Battery Technology

Vibration energy harvesting extracts energy from the environment and can mitigate reliance on battery technology in wireless sensor networks. This article presents the nonlinear responses of two multi-mass vibration energy harvesters that employ a velocity amplification effect. This amplification is achieved by momentum transfer from larger to smaller masses following impact between masses. Two systems are presented that show the evolution of multi-mass vibration energy harvester designs: (1) a simplified prototype that effectively demonstrates the basic principles of the approach and (2) an enhanced design that achieves higher power densities and a wider frequency response. Various configurations are investigated to better understand the nonlinear dynamics and how best to realise future velocity-amplified vibration energy harvesters. The frequency responses of the multi-mass harvesters show that these devices have the potential to reduce risks associated with deploying vibration energy harvester devices in wireless sensor network applications; the wide frequency response reduces the need to re-tune the harvesters following frequency variations of the source vibrations.

Design of Nonlinear Energy Harvester With Snap-Through Buckling Mechanism

2014 ◽  
Author(s):  
Sumin Seong ◽  
Soobum Lee
Keyword(s):  
Nonlinear Vibration ◽  
Energy Harvester ◽  
Excitation Frequency ◽  
Single Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Energy Harvesters ◽  
Design Variables ◽  
Random Nature ◽  
Broadband Frequency

Vibration energy harvesting (EH) has been initiated from linear vibration principle, which utilizes a single frequency to obtain power. Unfortunately, linear energy harvesters do not yield appreciable power because of random nature of vibration in the real world. In order to overcome the weakness of linear harvesters and account for the arbitrary nature of vibration, multiple nonlinear vibration energy harvesters have been developed and studied. This paper presents parametric study on the design of nonlinear vibration EH device that utilizes snap-through mechanism to obtain high power from broadband excitation frequency. The device is comprised of a cantilever beam with curved shell implemented in the middle of the beam. When vibrating, the curved shell causes snap-through buckling and the nature of vibration becomes nonlinear. For practical purposes, a broadband frequency vibration input is used to optimize the energy harvester design. Design variables are assigned and optimized in order to create optimal design of the energy harvester, which maximizes power output. The presented design will have positive effect by providing means to practically capturing wasted vibration energy in consideration of its broadband frequency utilization.

Modeling of Rotating Piezoelectric Vibration Energy Harvesters with Nonlinear Magnetic Forces

2014 ◽  
Vol 945-949 ◽  
pp. 1457-1460
Author(s):  
Bin Guo ◽  
Zhong Sheng Chen ◽  
Cong Cong Cheng ◽  
Yong Min Yang
Keyword(s):  
Magnetic Force ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Energy Harvesters ◽  
Magnetic Forces ◽  
Lagrange’S Equation ◽  
Better Than ◽  
Piezoelectric Vibration

A methodology of rotating vibration energy harvesting with nonlinear magnetic forces is studied in this paper. A mathematical model of rotating piezoelectric vibration energy harvesters with nonlinear magnetic forces is built by the Lagrange’s equation and assumed-modes method. The nonlinear model is solved by numerical methods. Then the effects of distance between two magnets are studied. The results demonstrate that the performance of rotating piezoelectric vibration energy harvester with nonlinear magnetic force is better than traditional linear ones when the distance between two magnets is appropriate.

scholarly journals Modeling, Simulation and Optimization of Piezoelectric Bimorph Transducer for Broadband Vibration Energy Harvesting

2017 ◽  
Vol 6 (4) ◽  
pp. 5 ◽  
Author(s):  
Nan Chen ◽  
Vishwas Bedekar
Keyword(s):  
Energy Harvester ◽  
Piezoelectric Properties ◽  
Vibration Energy ◽  
Piezoelectric Bimorph ◽  
Vibration Energy Harvesting ◽  
Compliance Matrix ◽  
Simulation And Optimization ◽  
Power Characteristics ◽  
Modeling Simulation ◽  
Length Width

We demonstrate the detailed analysis for conversion of piezoelectric properties into compliance matrix and simulate a series bimorph configuration for vibration based energy generation. Commercially available software COMSOL Multiphysics was used to apply boundary conditions for optimization of geometric parameters such as length, width and thickness of piezoelectric layer to study voltage and power characteristics of the harvester. The resulting energy harvester was found to generate 1.73 mW at 53.4 Hz across a 3MW load with an energy density of 13.08mJ/cm3. We also investigated feasibility of this model by comparing it with existing experimental data of known piezoelectric ceramic compositions and found good correlation between the two.

Modelling of Mechanical Nonlinearity in an Electromagnetic Vibration Energy Harvester Using a Forced Duffing Equation

2012 ◽  
Author(s):  
S. D. Moss ◽  
L. A. Vandewater ◽  
S. C. Galea
Keyword(s):  
Output Power ◽  
Energy Harvester ◽  
Duffing Oscillator ◽  
Maximum Output Power ◽  
Vibration Energy ◽  
Maximum Output ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Homotopy Analysis ◽  
Wire Coil

This work reports on the modelling and experimental validation of a bi-axial vibration energy harvesting approach that uses a permanent-magnet/ball-bearing arrangement and a wire-coil transducer. The harvester’s behaviour is modelled using a forced Duffing oscillator, and the primary first order steady state resonant solutions are found using the homotopy analysis method (or HAM). Solutions found are shown to compare well with measured bearing displacements and harvested output power, and are used to predict the wideband frequency response of this type of vibration energy harvester. A prototype harvesting arrangement produced a maximum output power of 12.9 mW from a 12 Hz, 500 milli-g (or 4.9 m/s2) rms excitation.

scholarly journals FINITE ELEMENT SIMULATION OF MEMS PIEZOELECTRIC ENERGY SCAVENGER BASED ON PZT THIN FILM

2019 ◽  
Vol 20 (1) ◽  
pp. 90-99
Author(s):  
Aliza Aini Md Ralib ◽  
Nur Wafa Asyiqin Zulfakher ◽  
Rosminazuin Ab Rahim ◽  
Nor Farahidah Za'bah ◽  
Noor Hazrin Hany Mohamad Hanif
Keyword(s):  
Thin Film ◽  
Energy Harvesting ◽  
Output Voltage ◽  
Energy Harvester ◽  
Maximum Output Power ◽  
Vibration Energy ◽  
Maximum Output ◽  
Vibration Energy Harvesting ◽  
Piezoelectric Energy ◽  
The World

Vibration energy harvesting has been progressively developed in the advancement of technology and widely used by a lot of researchers around the world. There is a very high demand for energy scavenging around the world due to it being cheaper in price, possibly miniaturized within a system, long lasting, and environmentally friendly. The conventional battery is hazardous to the environment and has a shorter operating lifespan. Therefore, ambient vibration energy serves as an alternative that can replace the battery because it can be integrated and compatible to micro-electromechanical systems. This paper presents the design and analysis of a MEMS piezoelectric energy harvester, which is a vibration energy harvesting type. The energy harvester was formed using Lead Zicronate Titanate (PZT-5A) as the piezoelectric thin film, silicon as the substrate layer and structural steel as the electrode layer. The resonance frequency will provide the maximum output power, maximum output voltage and maximum displacement of vibration. The operating mode also plays an important role to generate larger output voltage with less displacement of cantilever. Some designs also have been studied by varying height and length of piezoelectric materials. Hence, this project will demonstrate the simulation of a MEMS piezoelectric device for a low power electronic performance. Simulation results show PZT-5A piezoelectric energy with a length of 31 mm and height of 0.16 mm generates maximum output voltage of 7.435 V and maximum output power of 2.30 mW at the resonance frequency of 40 Hz. ABSTRAK: Penuaian tenaga getaran telah berkembang secara pesat dalam kemajuan teknologi dan telah digunakan secara meluas oleh ramai penyelidik di seluruh dunia. Terdapat permintaan yang sangat tinggi di seluruh dunia terhadap penuaian tenaga kerana harganya yang lebih murah, bersaiz kecil dalam satu sistem, tahan lama dan mesra alam. Manakala, bateri konvensional adalah berbahaya bagi alam sekitar dan mempunyai jangka hayat yang lebih pendek. Oleh itu, getaran tenaga dari persekitaran lebih sesuai sebagai alternatif kepada bateri kerana ia mudah diintegrasikan dan serasi dengan sistem mikroelektromekanikal. Kertas kerja ini  membentangkan reka bentuk dan analisis tenaga piezoelektrik MEMS iaitu salah satu jenis penuaian tenaga getaran. Penuai tenaga ini dibentuk menggunakan Lead Zicronate Titanate (PZT-5A) sebagai lapisan filem tipis piezoelektrik, silikon sebagai lapisan substrat dan keluli struktur sebagai lapisan elektrod. Frekuensi resonans akan memberikan hasil tenaga maksima, voltan tenaga maksima dan getaran jarak maksima. Mod pengendalian juga memainkan peranan penting bagi menghasilkan tenaga yang lebih besar. Reka bentuk yang mempunyai ketinggian dan panjang berlainan juga telah diuji dengan menggunakan bahan piezoelektrik yang sama. Oleh itu, projek ini akan menghasilkan simulasi piezoelektrik MEMS yang sesuai digunakan bagi alat elektronik berkuasa rendah. Hasil simulasi menunjukkan dengan panjang 31 mm dan ketinggian 0.16 mm, piezoelektrik PZT ini menghasilkan voltan maksima sebanyak 7.435 V dan tenaga output maksima 2.30 mW pada frekuensi resonans 40 Hz.

Sign in / Sign up

Export Citation Format

Share Document