scholarly journals Two-Dimensional Nonlinear Finite Element Analysis of CMC Microstructures

2011 ◽  
Author(s):  
Subodh K. Mital ◽  
Robert K. Goldberg ◽  
Peter J. Bonacuse
Keyword(s):  
Silicon Carbide ◽  
Finite Element ◽  
Cross Sections ◽  
Effective Properties ◽  
Ceramic Matrix Composites ◽  
Two Dimensional ◽  
Element Analysis ◽  
Damage Pattern ◽  
Damage Initiation ◽  
The Cross

Detailed two-dimensional finite element analyses of the cross-sections of a model CVI (chemical vapor infiltrated) SiC/SiC (silicon carbide fiber in a silicon carbide matrix) ceramic matrix composites are performed. High resolution images of the cross-section of this composite material are generated using serial sectioning of the test specimens. These images are then used to develop very detailed finite element models of the cross-sections using the public domain software OOF2 (Object Oriented Analysis of Material Microstructures). Examination of these images shows that these microstructures have significant variability and irregularity. How these variabilities manifest themselves in the variability in effective properties as well as the stress distribution, damage initiation and damage progression is the overall objective of this work. Results indicate that even though the macroscopic stress-strain behavior of various sections analyzed is very similar, each section has a very distinct damage pattern when subjected to inplane tensile loads and this damage pattern seems to follow the unique architectural and microstructural details of the analyzed sections.

Cross-section optimization of thin-walled open-section composite column for maximizing its ultimate strength

2021 ◽  
pp. 146442072110462
Author(s):  
Prashant K Choudhary ◽  
Prashanta K Mahato ◽  
Prasun Jana
Keyword(s):  
Finite Element ◽  
Ultimate Strength ◽  
Cross Section ◽  
Cross Sections ◽  
Ultimate Load ◽  
Material Failure ◽  
Element Analysis ◽  
Composite Column ◽  
Thin Walled ◽  
The Cross

This paper focuses on the optimization of thin-walled open cross-section laminated composite column subjected to uniaxial compressive load. The cross-section of the column is parameterized in such a way that it can represent a variety of shapes including most of the regular cross-sections such as H, C, T, and I sections. The objective is to obtain the best possible shape of the cross-section, by keeping a constant total material volume, which can maximize the ultimate load carrying capacity of the column. The ultimate strength of the column is determined by considering both buckling instability and material failure. For material failure, Tsai-Wu composite failure criterion is considered. As analytical solutions for these parameterized column models are not tractable, the ultimate loads of the composite columns are computed through finite-element analysis in ANSYS. And, the optimization is carried out by coupling these finite-element results with a genetic algorithm based optimization scheme developed in MATLAB. The optimal result obtained through this study is compared with an equivalent base model of cruciform cross-section. Results are reported for various lengths and boundary conditions of the columns. The comparison shows that a substantial increase of the ultimate load, as high as 610%, can be achieved through this optimization study. Thus, the present paper highlights some important characteristics of open cross-sections that can be useful in the design of thin-walled laminated column structures.

Two-Dimensional Full-Vectorial Finite Element Analysis of NRD Guide Devices

2021 ◽  
Vol 31 (4) ◽  
pp. 345-348
Author(s):  
Yasuhide Tsuji ◽  
Keita Morimoto ◽  
Akito Iguchi ◽  
Tatsuya Kashiwa ◽  
Shinji Nishiwaki
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Two Dimensional ◽  
Element Analysis ◽  
Nrd Guide

scholarly journals Image-based semi-multiscale finite element analysis using elastic subdomain homogenization

Meccanica ◽  
2021 ◽  
Author(s):  
J. Jansson ◽  
K. Salomonsson ◽  
J. Olofsson
Keyword(s):  
Finite Element ◽  
Analytical Method ◽  
Effective Properties ◽  
Reference Model ◽  
Computational Time ◽  
Component Level ◽  
Element Analysis ◽  
Model Fidelity ◽  
Multiscale Finite Element ◽  
Anisotropic Elastic

AbstractIn this paper we present a semi-multiscale methodology, where a micrograph is split into multiple independent numerical model subdomains. The purpose of this approach is to enable a controlled reduction in model fidelity at the microscale, while providing more detailed material data for component level- or more advanced finite element models. The effective anisotropic elastic properties of each subdomain are computed using periodic boundary conditions, and are subsequently mapped back to a reduced mesh of the original micrograph. Alternatively, effective isotropic properties are generated using a semi-analytical method, based on averaged Hashin–Shtrikman bounds with fractions determined via pixel summation. The chosen discretization strategy (pixelwise or partially smoothed) is shown to introduce an uncertainty in effective properties lower than 2% for the edge-case of a finite plate containing a circular hole. The methodology is applied to a aluminium alloy micrograph. It is shown that the number of elements in the aluminium model can be reduced by $$99.89\%$$ 99.89 % while not deviating from the reference model effective material properties by more than $$0.65\%$$ 0.65 % , while also retaining some of the characteristics of the stress-field. The computational time of the semi-analytical method is shown to be several orders of magnitude lower than the numerical one.

A FINITE ELEMENT ANALYSIS OF EFFECTIVE THERMOELECTROELASTIC PROPERTIES OF COMPOSITES WITH A DOUBLY PERIODIC ARRAY OF PIEZOELECTRIC FIBERS

2009 ◽  
Vol 23 (06n07) ◽  
pp. 1689-1694 ◽  
Author(s):  
PENG YAN ◽  
CHIPING JIANG
Keyword(s):  
Finite Element ◽  
Effective Properties ◽  
Cell Model ◽  
Periodic Array ◽  
The Finite Element Method ◽  
Element Analysis ◽  
Uniform Temperature Field ◽  
Periodic Microstructures ◽  
Doubly Periodic Array ◽  
Electrical Loads

This work deals with modeling of 1-3 thermoelectroelastic composites with a doubly periodic array of piezoelectric fibers under arbitrary combination of mechanical, electrical loads and a uniform temperature field. The finite element method (FEM) based on a unit cell model is extended to take into account the thermoelectroelastic effect. The FE predictions of effective properties for several typical periodic microstructures are presented, and their influences on effective properties are discussed. A comparison with the Mori-Tanaka method is made to estimate the application scope of micromechanics. The study is useful for the design and assessment of composites.

Two-dimensional empirical mode decomposition by finite elements

2006 ◽  
Vol 462 (2074) ◽  
pp. 3081-3096 ◽  
Author(s):  
Y Xu ◽  
B Liu ◽  
J Liu ◽  
S Riemenschneider
Keyword(s):  
Finite Element ◽  
Linear Combination ◽  
Empirical Mode Decomposition ◽  
Spline Interpolation ◽  
Basis Functions ◽  
Two Dimensional ◽  
Element Analysis ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Mode Decomposition

Empirical mode decomposition (EMD) is a powerful tool for analysis of non-stationary and nonlinear signals, and has drawn significant attention in various engineering application areas. This paper presents a finite element-based EMD method for two-dimensional data analysis. Specifically, we represent the local mean surface of the data, a key step in EMD, as a linear combination of a set of two-dimensional linear basis functions smoothed with bi-cubic spline interpolation. The coefficients of the basis functions in the linear combination are obtained from the local extrema of the data using a generalized low-pass filter. By taking advantage of the principle of finite-element analysis, we develop a fast algorithm for implementation of the EMD. The proposed method provides an effective approach to overcome several challenging difficulties in extending the original one-dimensional EMD to the two-dimensional EMD. Numerical experiments using both simulated and practical texture images show that the proposed method works well.

Meshing Method of High Precision FEM in Large Complex Structural Simulations

2012 ◽  
Vol 195-196 ◽  
pp. 701-704
Author(s):  
Yan Hua Xue ◽  
Zhi Guang Wang ◽  
Xiao Hong Li ◽  
Xin Jiang
Keyword(s):  
Finite Element ◽  
Complex Structure ◽  
Width Ratio ◽  
Two Dimensional ◽  
Element Analysis ◽  
Large Complex ◽  
Mesh Density ◽  
Length Width ◽  
Complex Structural ◽  
Dimensional Element

Shing is playing an important role in the large complex structural FEM simulations; it has a direct effect on calculating precision of structural simulations. For increasing the calculation accuracy and analysis accuracy of complex structure, the finite element meshing problems is proposed on the finite element analysis of large complicated structures. The effects caused by element type, mesh density and intergradations on calculating precision are studied and discussed. A research argues that with length-width ratio of 1~2 and length-thickness ration of 1.5~4.5 of two-dimensional rectangular element, the quality of meshing method of two-dimensional element is above normal. As the height of one-dimensional element is equal to the sum of reinforcing rib height of outer panel and half the thickness of panel, more accurate results can be obtained.

Analytical and Numerical Predictions of Thermoelastic Properties of Carbon Single-Walled Nanotubes

Aerospace ◽  
2005 ◽  
Author(s):  
Vinod P. Veedu ◽  
Davood Askari ◽  
Mehrdad N. Ghasemi-Nejhad
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Graphene Sheet ◽  
Effective Properties ◽  
Constitutive Models ◽  
Thermoelastic Properties ◽  
Asymptotic Homogenization ◽  
Element Analysis ◽  
Single Walled Nanotubes ◽  
Numerical Predictions

The objective of this paper is to develop constitutive models to predict thermoelastic properties of carbon single-walled nanotubes using analytical, asymptotic homogenization, and numerical, finite element analysis, methods. In our approach, the graphene sheet is considered as a non-homogeneous network shell layer which has zero material properties in the regions of perforation and whose effective properties are estimated from the solution of the appropriate local problems set on the unit cell of the layer. Our goal is to derive working formulas for the entire complex of the thermoelastic properties of the periodic network. The effective thermoelastic properties of carbon nanotubes were predicted using asymptotic homogenization method. Moreover, in order to verify the results of analytical predictions, a detailed finite element analysis is followed to investigate the thermoelastic response of the unit cells and the entire graphene sheet network.

Determination of Stress Concentration Around an Oblique Hole by a Finite-Element Technique

1983 ◽  
Vol 105 (2) ◽  
pp. 206-212 ◽  
Author(s):  
Hua-Ping Li ◽  
F. Ellyin
Keyword(s):  
Finite Element ◽  
Stress Concentration ◽  
Maximum Stress ◽  
Plate Thickness ◽  
Two Dimensional ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Parametric Studies ◽  
Element Technique

A plate weakened by an oblique penetration of a circular cylindrical hole has been investigated. The stress concentration around the hole is determined by a finite-element method. The results are compared with experimental data and other analytical works. Parametric studies of effects of angle of inclination, plate thickness, and width are performed. The maximum stress concentration factor (SCF) obtained from the finite-element analysis is higher than experimental results, and this deviation increases with the increase of angle of skewness. The major reason for this difference is attributed to the shear-action between layers parallel to the plate surface which cannot be directly included in the two-dimensional elements. An empirical formula is derived which accounts for the shear-action and renders the finite-element predictions in line with experimentally observed data.

Sign in / Sign up

Export Citation Format

Share Document