Parameterized Design of a Supersonic Radome

2001 ◽  
Author(s):  
Michael S. L. Hollis
Keyword(s):  
High Speed ◽  
Extensive Study ◽  
The Other ◽  
Short Term ◽  
Trade Off ◽  
Aerodynamic Shape ◽  
Parameterized Design ◽  
Ballistic Projectiles ◽  
Mach Numbers ◽  
Antenna Location

Abstract Future gun-launched projectiles will have higher muzzle velocities. There currently exists a need for RF transparent radome solutions with muzzle velocities near Mach numbers equal to 3 (M = 3). Future Combat System (FCS) requirements may push these velocities as high as M = 5. Assessments of aerothermal heating requirements for specific radome geometries need to be studied. Trade-off studies involving aerodynamic shape, antenna location, materials, and RF characteristics also need to be made. The final product of this report is twofold. The first is a short-term solution using the extruded/molded plastics to manufacture a radome. The other is a guideline for a more extensive study to find several solutions for high speed, RF transparent radomes for ballistic projectiles.

Practical Aspects of Propulsion Shaft Alignment

2021 ◽  
Author(s):  
Kyriakos Avgouleas ◽  
Emmanouil Sarris ◽  
George Gougoulidis
Keyword(s):  
Cost Effectiveness ◽  
Numerical Model ◽  
High Speed ◽  
The Other ◽  
Technical Literature ◽  
Trade Off ◽  
Fea Model ◽  
Shaft Alignment ◽  
Alignment Strategy ◽  
Potential Damage

The economical and operational implications of poor alignment are indisputable for the propulsion shafting system of a commercial vessel. This holds true for naval vessels as well, although far less documented in the technical literature. This paper addresses some of the challenges associated with the proper alignment of a high-speed naval craft, which has been in service for many years. Laser bore-sighting was performed on a Guided Missile Fast Patrol Boat resting on a docking cradle. The measured bearing offsets were input to a FEA model of the shafting system to calculate bearing reactions and detect potential misalignment issues. Subsequent decisions regarding corrective measures take into account the results computed by the numerical model, experience from sister ships, the available documentation from the building yard and several other factors which are discussed in the paper. The solutions proposed are targeted towards a balanced trade-off between cost effectiveness and out-of-service time on one hand, and the risk of potential damage from misalignment on the other hand, which would seriously disrupt the ship’s operational availability. Practical aspects and lessons identified in the process are also presented, which demonstrate the distinct differences in alignment strategy of a high-speed naval craft compared to a typical commercial vessel.

Aeroelastic Problems in connection with High-Speed Flight

1956 ◽  
Vol 60 (547) ◽  
pp. 459-475 ◽  
Author(s):  
E. G. Broadbent
Keyword(s):  
Mach Number ◽  
High Speed ◽  
The Other ◽  
Control Surface ◽  
The Past ◽  
Other Hand ◽  
Aerodynamic Derivatives ◽  
Mach Numbers ◽  
The One

SummaryA review is given of developments in the field of aeroelasticity during the past ten years. The effect of steadily increasing Mach number has been two-fold: on the one hand the aerodynamic derivatives have changed, and in some cases brought new problems, and on the other hand the design for higher Mach numbers has led to thinner aerofoils and more slender fuselages for which the required stiffness is more difficult to provide. Both these aspects are discussed, and various methods of attack on the problems are considered. The relative merits of stiffness, damping and massbalance for the prevention of control surface flutter are discussed. A brief mention is made of the recent problems of damage from jet efflux and of the possible aeroelastic effects of kinetic heating.

Improvement of Repeatability on N-Type 4H-SiC Epitaxial Growth by High Speed Wafer Rotation Vertical CVD Tool

2020 ◽  
Vol 1004 ◽  
pp. 78-83
Author(s):  
Yoshiaki Daigo ◽  
Akio Ishiguro ◽  
Shigeaki Ishii ◽  
Takehiko Kobayashi ◽  
Yoshikazu Moriyama
Keyword(s):  
Carrier Concentration ◽  
High Speed ◽  
Epitaxial Films ◽  
The Other ◽  
Short Term ◽  
Wafer Thickness ◽  
Sic Film ◽  
Sic Films ◽  
Effect Of Surface

N-type 4H-SiC homo-epitaxial films were grown on 150 mm diameter wafers by high speed wafer rotation vertical CVD tool, and effect of surface C/Si ratio on short-term and long-term repeatability of the SiC films was investigated. By tuning of growth condition, high uniform SiC film with in-wafer thickness uniformity of ±2.8 % (1.6 % σ/mean) and carrier concentration uniformity of ±3.1 % (1.9 % σ/mean) was successfully grown at higher introduced C/Si ratio of about 1.80, which corresponds to surface C/Si ratio higher than 1.0 on the whole wafer. This result was comparable to the film grown at lower introduced C/Si ratio of about 1.35, which corresponds to surface C/Si ratio lower than 1.0 on the whole wafer. On the other hand, the films on 13 wafers successively grown at higher introduced C/Si ratio indicated low fluctuation from 1.85 to 3.09 % (σ/mean), and the short-term repeatability of the in-wafer carrier concentration uniformity of the films grown at higher introduced C/Si ratio was improved compared with the films grown at lower introduced C/Si ratio. Additionally, in-wafer carrier concentration uniformity of the films on 171 wafers grown at higher introduced C/Si ratio showed 75 % quartile of 4.26 % (σ/mean), and this result was greatly superior to that of 8.21 % (σ/mean) for the films on 130 wafers grown at lower introduced C/Si ratio.

A Bird in the Hand Isn’t Good for Long

2018 ◽  
Vol 65 (1) ◽  
pp. 23-31 ◽  
Author(s):  
Stefan Scherbaum ◽  
Simon Frisch ◽  
Maja Dshemuchadse
Keyword(s):  
Decision Making ◽  
Cognitive Control ◽  
The Other ◽  
Decision Task ◽  
Short Term ◽  
Additional Time ◽  
Control Processes ◽  
Folk Wisdom ◽  
Study Participants ◽  
Insight Into

Abstract. Folk wisdom tells us that additional time to make a decision helps us to refrain from the first impulse to take the bird in the hand. However, the question why the time to decide plays an important role is still unanswered. Here we distinguish two explanations, one based on a bias in value accumulation that has to be overcome with time, the other based on cognitive control processes that need time to set in. In an intertemporal decision task, we use mouse tracking to study participants’ responses to options’ values and delays which were presented sequentially. We find that the information about options’ delays does indeed lead to an immediate bias that is controlled afterwards, matching the prediction of control processes needed to counter initial impulses. Hence, by using a dynamic measure, we provide insight into the processes underlying short-term oriented choices in intertemporal decision making.

Hidden “holes” in the capital of banks and the supply of credit to the real sector of economy

2018 ◽  
pp. 49-68 ◽  
Author(s):  
M. E. Mamonov
Keyword(s):  
Credit Risk ◽  
The Other ◽  
Real Sector ◽  
Capital Management ◽  
Loan Loss ◽  
Short Term ◽  
The Real ◽  
Ex Post ◽  
The One

Our analysis documents that the existence of hidden “holes” in the capital of not yet failed banks - while creating intertemporal pressure on the actual level of capital - leads to changing of maturity of loans supplied rather than to contracting of their volume. Long-term loans decrease, whereas short-term loans rise - and, what is most remarkably, by approximately the same amounts. Standardly, the higher the maturity of loans the higher the credit risk and, thus, the more loan loss reserves (LLP) banks are forced to create, increasing the pressure on capital. Banks that already hide “holes” in the capital, but have not yet faced with license withdrawal, must possess strong incentives to shorten the maturity of supplied loans. On the one hand, it raises the turnovers of LLP and facilitates the flexibility of capital management; on the other hand, it allows increasing the speed of shifting of attracted deposits to loans to related parties in domestic or foreign jurisdictions. This enlarges the potential size of ex post revealed “hole” in the capital and, therefore, allows us to assume that not every loan might be viewed as a good for the economy: excessive short-term and insufficient long-term loans can produce the source for future losses.

Pengembangan Kemitraan Koperasi, Usaha Mikro Dan Kecil (KUMK) Dengan Usaha Menengah/Besar Untuk Komoditi Unggulan Lokal

2019 ◽  
Vol 9 (1) ◽  
pp. 53-66 ◽  
Author(s):  
Dandan Irawan
Keyword(s):  
Business Performance ◽  
The Other ◽  
Economic Conditions ◽  
Small Enterprises ◽  
Business Partnerships ◽  
Short Term ◽  
Business Partnership ◽  
Structure Factors ◽  
Micro And Small Enterprises ◽  
Business Entities

Basically a natural partnership will achieve its goal if mutual requirements, mutual reinforcement, and mutual benefit can be maintained and made a strong fundamental commitment among partners. Nevertheless the development seems very slow. The cause is the presence of specific and different conditions and structure factors compared to other countries. Along with that, we still encounter various forms of gaps, such as inequality among regions, among income groups, between sectors, among economic actors, and so forth. The next problem is that in business entities including cooperatives and micro and small enterprises in running their business activities requires business partnerships with medium and large enterprises in order to improve business performance and business scale. While on the other hand our economic conditions and structures are not yet fully conducive to fostering partnerships based on purely business considerations or competitive market motivations but the business partnership of the foundation is strong enough in our country's constitution. Partnerships will work if partners are equally benefiting. Our concept of partnership is like that, although in the short term, there is a party or a party benefiting more from the other side.

EFFECT OF ACTINOMYCIN D ON TSH-INDUCED STIMULATION OF THYROIDAL PROTEIN SYNTHESIS IN THE RAT

1974 ◽  
Vol 77 (1) ◽  
pp. 64-70 ◽  
Author(s):  
Gustav Wägar
Keyword(s):  
Protein Synthesis ◽  
Actinomycin D ◽  
The Other ◽  
Leucine Incorporation ◽  
Short Term ◽  
Other Hand ◽  
Thyroid Glands ◽  
Translational Level ◽  
Stimulation Of

ABSTRACT Whether the short-term regulation of thyroidal protein synthesis by TSH occurs at the transcriptional or the translational level was tested by measuring the effect of actinomycin D (act D) on the TSH-induced stimulation of L-14C-leucine incorporation into the thyroidal proteins of rats. TSH was injected 6 h before the rats were killed. The thyroid glands were then removed and incubated in vitro in the presence of L-14C-leucine for 2 h. The pronounced stimulation of leucine incorporation in the TSH-treated animals was depressed as compared with controls but still significant even when the animals had been pre-treated with 100 μg act D 24 and 7 h before sacrifice. On the other hand, act D strongly decreased incorporation of 3H-uridine into RNA. Short-term regulation of thyroidal protein synthesis by TSH appears to be partly but not wholly dependent on neosynthesis of RNA. Hence regulation may partly occur at the translation level of protein synthesis.

MULTIDIMENSIONAL SIMULATIONS AND TEST FIRES OF A HYDROGEN-FUELED RAMJET WITH AN ANNULAR DETONATIVE COMBUSTOR AT APPROACHING AIR FLOW OF MACH 2 AND 1.5

2020 ◽  
Author(s):  
V. S. IVANOV ◽  
◽  
V. S. AKSENOV ◽  
S. M. FROLOV ◽  
P. A. GUSEV ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicles ◽  
High Speed ◽  
Constant Pressure ◽  
Air Flow ◽  
Thermodynamic Cycle ◽  
Aerial Vehicles ◽  
Mach Numbers

Modern high-speed unmanned aerial vehicles are powered with small-size turbojets or ramjets. Existing ramjets operating on the thermodynamic cycle with de§agrative combustion of fuel at constant pressure are efficient at flight Mach numbers M ranging from about 2 to 6.

scholarly journals Black Hole Algorithm for Sustainable Design of Counterfort Retaining Walls

2020 ◽  
Vol 12 (7) ◽  
pp. 2767 ◽  
Author(s):  
Víctor Yepes ◽  
José V. Martí ◽  
José García
Keyword(s):  
Black Hole ◽  
Sustainable Design ◽  
Retaining Walls ◽  
The Other ◽  
Trade Off ◽  
Construction Company ◽  
Geometric Variables ◽  
The Stability ◽  
The Cost ◽  
Black Hole Algorithm

The optimization of the cost and CO 2 emissions in earth-retaining walls is of relevance, since these structures are often used in civil engineering. The optimization of costs is essential for the competitiveness of the construction company, and the optimization of emissions is relevant in the environmental impact of construction. To address the optimization, black hole metaheuristics were used, along with a discretization mechanism based on min–max normalization. The stability of the algorithm was evaluated with respect to the solutions obtained; the steel and concrete values obtained in both optimizations were analyzed. Additionally, the geometric variables of the structure were compared. Finally, the results obtained were compared with another algorithm that solved the problem. The results show that there is a trade-off between the use of steel and concrete. The solutions that minimize CO 2 emissions prefer the use of concrete instead of those that optimize the cost. On the other hand, when comparing the geometric variables, it is seen that most remain similar in both optimizations except for the distance between buttresses. When comparing with another algorithm, the results show a good performance in optimization using the black hole algorithm.

scholarly journals Long- and Short-Term Conductance Control of Artificial Polymer Wire Synapses

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 312
Author(s):  
Naruki Hagiwara ◽  
Shoma Sekizaki ◽  
Yuji Kuwahara ◽  
Tetsuya Asai ◽  
Megumi Akai-Kasaya
Keyword(s):  
Artificial Intelligence ◽  
Human Brain ◽  
High Speed ◽  
Conductive Polymer ◽  
Long Term Potentiation ◽  
Short Term ◽  
Synaptic Functions ◽  
Term Potentiation ◽  
Artificial Brain ◽  
External Stimuli

Networks in the human brain are extremely complex and sophisticated. The abstract model of the human brain has been used in software development, specifically in artificial intelligence. Despite the remarkable outcomes achieved using artificial intelligence, the approach consumes a huge amount of computational resources. A possible solution to this issue is the development of processing circuits that physically resemble an artificial brain, which can offer low-energy loss and high-speed processing. This study demonstrated the synaptic functions of conductive polymer wires linking arbitrary electrodes in solution. By controlling the conductance of the wires, synaptic functions such as long-term potentiation and short-term plasticity were achieved, which are similar to the manner in which a synapse changes the strength of its connections. This novel organic artificial synapse can be used to construct information-processing circuits by wiring from scratch and learning efficiently in response to external stimuli.

Sign in / Sign up

Export Citation Format

Share Document