Acoustic Energy Extraction in the Presence of Duct Mean Flow

Author(s):  
Sameer I. Madanshetty ◽  
Boa-Teh Chu

Abstract A method for controlling noise level in duct flows is described. The method is based on the principle of energy extraction by active source(s), rather than by wave cancellation as in “anti-sound”. As such the method of energy extraction is robust; it does not need the delicate signal processing, perfect phase and amplitude matching, crucial to sound cancellation. Analysis indicates that in the presence of through flow the control is effective in extracting energy from any waves traversing it. As the duct flow Mach number increases the control appears to be less effective for waves produced upstream of it but it is more effective for the waves produced downstream of the device. Further, this conclusion remains valid whether the detector is placed on the upstream or downstream side of the control device. A future paper will report the experimental validation of the analysis.

Author(s):  
Christoph Jörg ◽  
Michael Wagner ◽  
Thomas Sattelmayer

The thermoacoustic stability of gas turbines depends on a balance of acoustic energy inside the engine. While the flames produce acoustic energy, other areas like the impingement cooling system contribute to damping. In this paper, we investigate the damping potential of an annular impingement sleeve geometry embedded into a realistic environment. A cold flow test rig was designed to represent real engine conditions in terms of geometry, and flow situation. High quality data was delivered by six piezoelectric dynamic pressure sensors. Experiments were carried out for different mean flow velocities through the cooling holes. The acoustic reflection coefficient of the impingement sleeve was evaluated at a downstream reference location. Further parameters investigated were the number of cooling holes, and the geometry of the chamber surrounding the impingement sleeve. Experimental results show that the determining parameter for the reflection coefficient is the mean flow velocity through the impingement holes. An increase of the mean flow velocity leads to significantly increased damping, and to low values of the reflection coefficient.


2015 ◽  
Vol 28 (23) ◽  
pp. 9332-9349 ◽  
Author(s):  
Liang Wu ◽  
Zhiping Wen ◽  
Renguang Wu

Abstract Part I of this study examined the modulation of the monsoon trough (MT) on tropical depression (TD)-type–mixed Rossby–gravity (MRG) and equatorial Rossby (ER) waves over the western North Pacific based on observations. This part investigates the interaction of these waves with the MT through a diagnostics of energy conversion that separates the effect of the MT on TD–MRG and ER waves. It is found that the barotropic conversion associated with the MT is the most important mechanism for the growth of eddy energy in both TD–MRG and ER waves. The large rotational flows help to maintain the rapid growth and tilted horizontal structure of the lower-tropospheric waves through a positive feedback between the wave growth and horizontal structure. The baroclinic conversion process associated with the MT contributes a smaller part for TD–MRG waves, but is of importance comparable to barotropic conversion for ER waves as it can produce the tilted vertical structure. The growth rates of the waves are much larger during strong MT years than during weak MT years. Numerical experiments are conducted for an idealized MRG or ER wave using a linear shallow-water model. The results confirm that the monsoon background flow can lead to an MRG-to-TD transition and the ER wave amplifies along the axis of the MT and is more active in the strong MT state. Those results are consistent with the findings in Part I. This indicates that the mean flow of the MT provides a favorable background condition for the development of the waves and acts as a key energy source.


2021 ◽  
Vol 931 ◽  
Author(s):  
R. Akhmedagaev ◽  
O. Zikanov ◽  
Y. Listratov

Direct numerical simulations and linear stability analysis are carried out to study mixed convection in a horizontal duct with constant-rate heating applied at the bottom and an imposed transverse horizontal magnetic field. A two-dimensional approximation corresponding to the asymptotic limit of a very strong magnetic field effect is validated and applied, together with full three-dimensional analysis, to investigate the flow's behaviour in the previously unexplored range of control parameters corresponding to typical conditions of a liquid metal blanket of a nuclear fusion reactor (Hartmann numbers up to $10^4$ and Grashof numbers up to $10^{10}$ ). It is found that the instability to quasi-two-dimensional rolls parallel to the magnetic field discovered at smaller Hartmann and Grashof numbers in earlier studies also occurs in this parameter range. Transport of the rolls by the mean flow leads to magnetoconvective temperature fluctuations of exceptionally high amplitudes. It is also demonstrated that quasi-two-dimensional structure of flows at very high Hartmann numbers does not guarantee accuracy of the classical two-dimensional approximation. The accuracy deteriorates at the highest Grashof numbers considered in the study.


2019 ◽  
Vol 32 (21) ◽  
pp. 7173-7189 ◽  
Author(s):  
Alvaro de la Cámara ◽  
Thomas Birner ◽  
John R. Albers

Abstract A combination of 240 years of output from a state-of-the-art chemistry–climate model and a twentieth-century reanalysis product is used to investigate to what extent sudden stratospheric warmings are preceded by anomalous tropospheric wave activity. To this end we study the fate of lower tropospheric wave events (LTWEs) and their interaction with the stratospheric mean flow. These LTWEs are contrasted with sudden stratospheric deceleration events (SSDs), which are similar to sudden stratospheric warmings but place more emphasis on the explosive dynamical nature of such events. Reanalysis and model output provide very similar statistics: Around one-third of the identified SSDs are preceded by wave events in the lower troposphere, while two-thirds of the SSDs are not preceded by a tropospheric wave event. In addition, only 20% of all anomalous tropospheric wave events are followed by an SSD in the stratosphere. This constitutes statistically robust evidence that the anomalous amplification of wave activity in the stratosphere that drives SSDs is not necessarily due to an anomalous amplification of the waves in the source region (i.e., the lower troposphere). The results suggest that the dynamics in the lowermost stratosphere and the vortex geometry are essential, and should be carefully analyzed in the search for precursors of SSDs.


Ocean Science ◽  
2012 ◽  
Vol 8 (1) ◽  
pp. 19-35 ◽  
Author(s):  
F. K. Hunt ◽  
R. Tailleux ◽  
J. J.-M. Hirschi

Abstract. Tests of the new Rossby wave theories that have been developed over the past decade to account for discrepancies between theoretical wave speeds and those observed by satellite altimeters have focused primarily on the surface signature of such waves. It appears, however, that the surface signature of the waves acts only as a rather weak constraint, and that information on the vertical structure of the waves is required to better discriminate between competing theories. Due to the lack of 3-D observations, this paper uses high-resolution model data to construct realistic vertical structures of Rossby waves and compares these to structures predicted by theory. The meridional velocity of a section at 24° S in the Atlantic Ocean is pre-processed using the Radon transform to select the dominant westward signal. Normalized profiles are then constructed using three complementary methods based respectively on: (1) averaging vertical profiles of velocity, (2) diagnosing the amplitude of the Radon transform of the westward propagating signal at different depths, and (3) EOF analysis. These profiles are compared to profiles calculated using four different Rossby wave theories: standard linear theory (SLT), SLT plus mean flow, SLT plus topographic effects, and theory including mean flow and topographic effects. Our results support the classical theoretical assumption that westward propagating signals have a well-defined vertical modal structure associated with a phase speed independent of depth, in contrast with the conclusions of a recent study using the same model but for different locations in the North Atlantic. The model structures are in general surface intensified, with a sign reversal at depth in some regions, notably occurring at shallower depths in the East Atlantic. SLT provides a good fit to the model structures in the top 300 m, but grossly overestimates the sign reversal at depth. The addition of mean flow slightly improves the latter issue, but is too surface intensified. SLT plus topography rectifies the overestimation of the sign reversal, but overestimates the amplitude of the structure for much of the layer above the sign reversal. Combining the effects of mean flow and topography provided the best fit for the mean model profiles, although small errors at the surface and mid-depths are carried over from the individual effects of mean flow and topography respectively. Across the section the best fitting theory varies between SLT plus topography and topography with mean flow, with, in general, SLT plus topography performing better in the east where the sign reversal is less pronounced. None of the theories could accurately reproduce the deeper sign reversals in the west. All theories performed badly at the boundaries. The generalization of this method to other latitudes, oceans, models and baroclinic modes would provide greater insight into the variability in the ocean, while better observational data would allow verification of the model findings.


2018 ◽  
Vol 51 ◽  
pp. 03001
Author(s):  
Baiman Chen ◽  
Frank G.F. Qin ◽  
Youyuan Shao ◽  
Hanmin Xiao ◽  
Simin Huang ◽  
...  

Work on the hydrodynamic entry length of pipe and duct flow has been well studied over the years. The assumption of fully developed flows is commonly used in many practical engineering applications (e.g. Moody's chart). For laminar axial pipe flow, the hydrodynamic entry length can be found through the monomial proposed by Kays, Shah and Bhatti (KSB) (Lh=0.056ReDh). In contrast, several approximations exist for fully turbulent flows (i.e. 10Dh-150Dh). Through theoretical and numerical investigations, the hydrodynamic entry length for swirling decaying pipe flow in the laminar regime is investigated. It was found that, the development length Lh for the axial velocity profile changes when a tangential component is added to the mean flow. The reduction in the hydrodynamic length was found to be dependent on the inlet swirl angle θ. The results indicate that a modification can be made on the KSB equation for two-dimensional swirling annular pipe flow.


Author(s):  
R Hernandez ◽  
S Jung ◽  
K I Matveev

Energy of high-amplitude sound that often appears in acoustic resonators with mean flow can be harnessed and converted into electricity for powering sensors and other devices. In this study, tests were conducted in a simple setup consisting of a pipe with a pair of baffles and a piezoelement. Tonal sound, corresponding to the second acoustic mode of the resonator, was excited due to vortex shedding/impinging on baffles in the presence of mean flow. Generated sound energy was partially converted into electrical energy by a piezoelement. About 0.55 mW of electric power was produced on a resistive electric load at acoustic pressure amplitudes in the pipe about 170 Pa and mean flow velocity 2.6 m/s.


2001 ◽  
Vol 19 (8) ◽  
pp. 985-990 ◽  
Author(s):  
M. N. Sasi ◽  
V. Deepa

Abstract. The vertical flux of the horizontal momentum associated with the equatorial Kelvin and Rossby-gravity waves are estimated from the winds measured by the Indian MST radar located at Gadanki (13.5° N, 79.2° E) during September 1995 to August 1996 in the tropospheric and lower stratospheric regions for all four seasons. The present study shows that momentum flux values are greater during equinox seasons than solstices, with values near the tropopause level being  16 × 10-3, 7.4 × 10-3, 27 × 10-3 and 5.5 × 10-3 m2 s-2 for Kelvin waves and 5.5 × 10-3, 3.5 × 10-3, 6.7 × 10-3 and 2.1 × 10-3 m2 s-2 for RG waves during autumnal equinox, winter, vernal equinox and summer seasons, respectively. Using these momentum flux values near the tropopause level, acceleration of the mean flow in the stratosphere up to a 29 km height were computed following Plumb (1984), by considering the wave-meanflow interaction and the deposition of the momentum through the radiative dissipation of the waves. A comparison of the estimated mean-flow acceleration in the stratosphere compares well, except at a few height levels, with the observed mean-flow accelerations in the stratosphere derived from the radiosonde data from a nearby station.Key words. Meteorology and atmosphenic dynamics (tropical meteorology; waves and tides)


This paper re-examines a proposal due to Liepmann in which the hydro­acoustic effects of a turbulent boundary layer are represented in terms of the displacement thickness fluctuations. The influence of the curvature of the surface that supports the boundary layer is discussed, and in particular the asymptotic condition is obtained under which Liepmann’s formalism is applicable in the vicinity of leading and trailing edges. This is important for the theoretical treatment of the interaction of nominally steady flows with wall cavities, slots in aerofoils, splitter plates, etc. Displacement thickness fluctuations in the form of Tollmien-Schlichting waves gene­ rated at a leading edge by a disturbance, such as an incident sound wave, are shown to result in a conversion of mean flow energy into sound. At a trailing edge, however, acoustic-mean flow interaction results in the absorption of acoustic energy. A consequence of the leading-edge effect is that it provides an energy transfer mechanism which is capable of main­taining edge tone and cavity oscillations, and this is illustrated by applica­tion of the theory to the flue organ pipe. In this case encouraging support for the asymptotic analysis is provided by a comparison with recently published experimental data.


2005 ◽  
Vol 127 (6) ◽  
pp. 1183-1190 ◽  
Author(s):  
Guoyi Peng

A practical combined computation method of the circumferentially averaged mean through-flow is presented for 3D inverse computations of hydraulic turbomachinery blades to consider the influence of interrelated hydraulic components. A comprehensive computation domain including the runner blades and related components is adopted and the mean flow is calculated altogether by solving a set of rotational flow governing equations simultaneously. The method has been applied to the case of Kaplan turbine. Computational results were compared to experimental data and their agreement was confirmed. Numerical investigation indicates that the mean flow is dependent on the configuration of guide vanes and the effect of runner blades reaches to the far upstream. The importance of properly taking account of the effect of blade geometry and the influence of interrelated hydraulic components is demonstrated.


Sign in / Sign up

Export Citation Format

Share Document