Plastic Flow Establishment in Circular Pipes Under the Effect of a Magnetic Field

2010 ◽  
Author(s):  
Juan S. Stockle ◽  
Mario F. Letelier ◽  
Dennis A. Siginer ◽  
Jesus A. Maria
Keyword(s):  
Magnetic Field ◽  
Plastic Flow ◽  
Lower Cost ◽  
Hartmann Number ◽  
Industrial Applications ◽  
Pressure Gradients ◽  
Circular Pipes ◽  
Stationary Rate ◽  
Rate Processes ◽  
Optimal Mixing

In many biological, chemical and industrial applications the time for discharging a pipe in a process is very important in order to obtain optimal mixing. Particulary in the case of stationary rate processes it may mean lower cost and improved optimization. In this paper a new method to compute the velocity profile in established plastic flow in circular pipes under the effect of a magnetic field is presented. Results are presented for a variety of pressure gradients and yield stresses for different values of the Hartmann number.

Effects of uniform or non-uniform heating at bottom wall on MHD mixed convection in a porous cavity saturated by nanofluid

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Subramanian Muthukumar ◽  
Selvaraj Sureshkumar ◽  
Arthanari Malleswaran ◽  
Murugan Muthtamilselvan ◽  
Eswari Prem
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Darcy Number ◽  
Bottom Wall ◽  
Uniform Heating ◽  
The Magnetic Field

Abstract A numerical investigation on the effects of uniform and non-uniform heating of bottom wall on mixed convective heat transfer in a square porous chamber filled with nanofluid in the appearance of magnetic field is carried out. Uniform or sinusoidal heat source is fixed at the bottom wall. The top wall moves in either positive or negative direction with a constant cold temperature. The vertical sidewalls are thermally insulated. The finite volume approach based on SIMPLE algorithm is followed for solving the governing equations. The different parameters connected with this study are Richardson number (0.01 ≤ Ri ≤ 100), Darcy number (10−4 ≤ Da ≤ 10−1), Hartmann number (0 ≤ Ha ≤ 70), and the solid volume fraction (0.00 ≤ χ ≤ 0.06). The results are presented graphically in the form of isotherms, streamlines, mid-plane velocities, and Nusselt numbers for the various combinations of the considered parameters. It is observed that the overall heat transfer rate is low at Ri = 100 in the positive direction of lid movement, whereas it is low at Ri = 1 in the negative direction. The average Nusselt number is lowered on growing Hartmann number for all considered moving directions of top wall with non-uniform heating. The low permeability, Da = 10−4 keeps the flow pattern same dominating the magnetic field, whereas magnetic field strongly affects the flow pattern dominating the high Darcy number Da = 10−1. The heat transfer rate increases on enhancing the solid volume fraction regardless of the magnetic field.

scholarly journals Effect of magnetic field on nanofluid free convection in Conical Partially Annular Space

2020 ◽  
Vol 330 ◽  
pp. 01005
Author(s):  
Abderrahmane AISSA ◽  
Mohamed Amine MEDEBBER ◽  
Khaled Al-Farhany ◽  
Mohammed SAHNOUN ◽  
Ali Khaleel Kareem ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Boussinesq Approximation ◽  
Simulation Software ◽  
Comsol Multiphysics ◽  
Governing Equations ◽  
Element Analysis ◽  
Vertical Side ◽  
Side Walls

Natural convection of a magneto hydrodynamic nanofluid in a porous cavity in the presence of a magnetic field is investigated. The two vertical side walls are held isothermally at temperatures Th and Tc, while the horizontal walls of the outer cone are adiabatic. The governing equations obtained with the Boussinesq approximation are solved using Comsol Multiphysics finite element analysis and simulation software. Impact of Rayleigh number (Ra), Hartmann number (Ha) and nanofluid volume fraction (ϕ) are depicted. Results indicated that temperature gradient increases considerably with enhance of Ra and ϕ but it reduces with increases of Ha.

scholarly journals Design, Analysis and Test of a Hyperbolic Magnetic Field Voice Coil Actuator for Magnetic Levitation Fine Positioning Stage

Energies ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1830
Author(s):  
Yiheng Zhou ◽  
Baoquan Kou ◽  
He Zhang ◽  
Lu Zhang ◽  
Likun Wang
Keyword(s):  
Magnetic Field ◽  
High Precision ◽  
Magnetic Levitation ◽  
Structural Parameters ◽  
Industrial Applications ◽  
Degree Of Freedom ◽  
Force Density ◽  
Precision Positioning ◽  
Element Analysis ◽  
Voice Coil Actuator

The multi-degree-of-freedom high-precision positioning system (MHPS) is one of the key technologies in many advanced industrial applications. In this paper, a novel hyperbolic magnetic field voice coil actuator using a rhombus magnet array (HMF-VCA) for MHPS is proposed. Benefiting from the especially designed rhombus magnet array, the proposed HMF-VCA has the advantage of excellent force uniformity, which makes it suitable for multi-degree-of-freedom high-precision positioning applications. First, the basic structure and operation principles of the HMF-VCA are presented. Second, the six-degree-of-freedom force and torque characteristic of the HMF-VCA is studied by three-dimensional finite element analysis (3-D FEA). Third, the influence of structural parameters on force density and force uniformity is investigated, which is conducive to the design and optimization of the HMF-VCA. Finally, a prototype is constructed, and the comparison between the HMF-VCA and conventional VCAs proves the advantage of the proposed topology.

scholarly journals Influence of Magnetic Field on the Peristaltic Flow of a Viscous Fluid through a Finite-Length Cylindrical Tube

2010 ◽  
Vol 7 (3) ◽  
pp. 169-176 ◽  
Author(s):  
S. K. Pandey ◽  
Dharmendra Tripathi
Keyword(s):  
Magnetic Field ◽  
Viscous Fluid ◽  
Transverse Magnetic Field ◽  
Finite Length ◽  
Flow Rate ◽  
Hartmann Number ◽  
Volume Flow Rate ◽  
Critical Value ◽  
Transverse Magnetic ◽  
Volume Flow

The paper presents an analytical investigation of the peristaltic transport of a viscous fluid under the influence of a magnetic field through a tube of finite length in a dimensionless form. The expressions of pressure gradient, volume flow rate, average volume flow rate and local wall shear stress have been obtained. The effects of the transverse magnetic field and electrical conductivity (i.e. the Hartmann number) on the mechanical efficiency of a peristaltic pump have also been studied. The reflux phenomenon is also investigated. It is concluded, on the basis of the pressure distribution along the tubular length and pumping efficiency, that if the transverse magnetic field and the electric conductivity increase, the pumping machinery exerts more pressure for pushing the fluid forward. There is a linear relation between the averaged flow rate and the pressure applied across one wavelength that can restrain the flow due to peristalsis. It is found that there is a particular value of the averaged flow rate corresponding to a particular pressure that does not depend on the Hartmann number. Naming these values ‘critical values’, it is concluded that the pressure required for checking the flow increases with the Hartmann number above the critical value and decreases with it below the critical value. It is also inferred that magneto-hydrodynamic parameters make the fluid more prone to flow reversal. The conclusion applied to oesophageal swallowing reveals that normal water is easier to swallow than saline water. The latter is more prone to flow reversal. A significant difference between the propagation of the integral and non-integral number of waves along the tube is that pressure peaks are identical in the former and different in the latter cases.

scholarly journals CuO–Water Nanofluid Magnetohydrodynamic Natural Convection inside a Sinusoidal Annulus in Presence of Melting Heat Transfer

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
M. Sheikholeslami ◽  
R. Ellahi ◽  
C. Fetecau
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Melting Heat ◽  
Melting Heat Transfer ◽  
Limiting Case ◽  
Good Agreement ◽  
Melting Parameter

Impact of nanofluid natural convection due to magnetic field in existence of melting heat transfer is simulated using CVFEM in this research. KKL model is taken into account to obtain properties of CuO–H2O nanofluid. Roles of melting parameter (δ), CuO–H2O volume fraction (ϕ), Hartmann number (Ha), and Rayleigh (Ra) number are depicted in outputs. Results depict that temperature gradient improves with rise of Rayleigh number and melting parameter. Nusselt number detracts with rise of Ha. At the end, a comparison as a limiting case of the considered problem with the existing studies is made and found in good agreement.

MHD natural convection of Cu/H2O nanofluid in a horizontal semi-cylinder with a local triangular heater

2018 ◽  
Vol 28 (12) ◽  
pp. 2979-2996 ◽  
Author(s):  
A.S. Dogonchi ◽  
Mikhail A. Sheremet ◽  
Ioan Pop ◽  
D.D. Ganji
Keyword(s):  
Magnetic Field ◽  
Rayleigh Number ◽  
Free Convection ◽  
Shape Factor ◽  
Uniform Magnetic Field ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Horizontal Cylinder ◽  
Content Type ◽  
Nanoparticles Volume Fraction

Purpose The purpose of this study is to investigate free convection of copper-water nanofluid in an upper half of circular horizontal cylinder with a local triangular heater under the effects of uniform magnetic field and cold cylinder shell using control volume finite element method (CVFEM). Design/methodology/approach Governing equations formulated in dimensionless stream function, vorticity and temperature variables using the single-phase nanofluid model with Brinkman correlation for the effective dynamic viscosity and Hamilton and Crosser model for the effective thermal conductivity have been solved numerically by CVFEM. Findings The impacts of control parameters such as the Rayleigh number, Hartmann number, nanoparticles volume fraction, local triangular heater size, shape factor on streamlines and isotherms as well as local and average Nusselt numbers have been examined. The outcomes indicate that the average Nusselt number is an increasing function of the Rayleigh number, shape factor and nanoparticles volume fraction, while it is a decreasing function of the Hartmann number. Originality/value A complete study of the free convection of copper-water nanofluid in an upper half of circular horizontal cylinder with a local triangular heater under the effects of uniform magnetic field and cold cylinder shell using CVFEM is addressed.

Effect of magnetic field-dependent thermal conductivity on natural convection of magnetic nanofluid inside a square enclosure

2019 ◽  
Vol 29 (4) ◽  
pp. 1466-1489 ◽  
Author(s):  
Mohammadhossein Hajiyan ◽  
Shohel Mahmud ◽  
Mohammad Biglarbegian ◽  
Hussein A. Abdullah ◽  
A. Chamkha
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Magnetic Nanofluid ◽  
Content Type ◽  
Square Enclosure ◽  
Field Dependent

Purpose The purpose of this paper is to investigate the convective heat transfer of magnetic nanofluid (MNF) inside a square enclosure under uniform magnetic fields considering nonlinearity of magnetic field-dependent thermal conductivity. Design/methodology/approach The properties of the MNF (Fe3O4+kerosene) were described by polynomial functions of magnetic field-dependent thermal conductivity. The effect of the transverse magnetic field (0 < H < 105), Hartmann Number (0 < Ha < 60), Rayleigh number (10 <Ra <105) and the solid volume fraction (0 < φ < 4.7%) on the heat transfer performance inside the enclosed space was examined. Continuity, momentum and energy equations were solved using the finite element method. Findings The results show that the Nusselt number increases when the Rayleigh number increases. In contrast, the convective heat transfer rate decreases when the Hartmann number increases due to the strong magnetic field which suppresses the buoyancy force. Also, a significant improvement in the heat transfer rate is observed when the magnetic field is applied and φ = 4.7% (I = 11.90%, I = 16.73%, I = 10.07% and I = 12.70%). Research limitations/implications The present numerical study was carried out for a steady, laminar and two-dimensional flow inside the square enclosure. Also, properties of the MNF are assumed to be constant (except thermal conductivity) under magnetic field. Practical implications The results can be used in thermal storage and cooling of electronic devices such as lithium-ion batteries during charging and discharging processes. Originality/value The accuracy of results and heat transfer enhancement having magnetic field-field-dependent thermal conductivity are noticeable. The results can be used for different applications to improve the heat transfer rate and enhance the efficiency of a system.

Second Law Analysis of Magnetorheological Rotational Flow With Viscous Dissipation

2016 ◽  
Vol 8 (2) ◽  
Author(s):  
Abbas Hazbavi
Keyword(s):  
Magnetic Field ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Hartmann Number ◽  
Outer Cylinder ◽  
Base Flow ◽  
Convection Flow ◽  
Fluid Temperature ◽  
Brinkman Number ◽  
Fluid Elasticity

In this study, the influences of the applied magnetic field and fluid elasticity were investigated for a nonlinear viscoelastic fluid obeying the Carreau equation between concentric annulus where the inner cylinder rotates at a constant angular velocity and the outer cylinder is stationary. The governing motion and energy balance equations are coupled while viscous dissipation is taken into account, adding complexity to the already highly correlated set of differential equations. The numerical solution is obtained for the narrow gap limit and steady-state base flow. Magnetic field effect on local entropy generation due to steady two-dimensional laminar forced convection flow was investigated. This study was focused on the entropy generation characteristics and its dependency on various dimensionless parameters. The effects of the Hartmann number, the Brinkman number, the Deborah number, and the fluid elasticity on the stability of the flow were investigated. The application of the magnetic field induces a resistive force acting in the opposite direction of the flow, thus causing its deceleration. Moreover, the study shows that the presence of magnetic field tends to slowdown the fluid motion and thus increases the fluid temperature. However, the total entropy generation number decreases as the Hartmann number and fluid elasticity increase and it increases with increasing Brinkman number.

scholarly journals MHD convection ow in a constricted channel

2018 ◽  
Vol 26 (2) ◽  
pp. 267-283
Author(s):  
M. Tezer-Sezgin ◽  
Merve Gürbüz
Keyword(s):  
Magnetic Field ◽  
Applied Magnetic Field ◽  
Hartmann Number ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Particular Solution ◽  
Laminar Convection ◽  
Long Channel ◽  
Velocity Pressure

Abstract We consider the steady, laminar, convection ow in a long channel of 2D rectangular constricted cross-section under the inuence of an applied magnetic field. The Navier-Stokes equations including Lorentz and buoyancy forces are coupled with the temperature equation and are solved by using linear radial basis function (RBF) approximations in terms of the velocity, pressure and the temperature of the fluid. RBFs are used in the approximation of the particular solution which becomes also the approximate solution of the problem. Results are obtained for several values of Grashof number (Gr), Hartmann number (M) and the constriction ratios (CR) to see the effects on the ow and isotherms for fixed values of Reynolds number and Prandtl number. As M increases, the ow is flattened. An increase in Gr increases the magnitude of the ow in the channel. Isolines undergo an inversion at the center of the channel indicating convection dominance due to the strong buoyancy force, but this inversion is retarded with the increase in the strength of the applied magnetic field. When both Hartmann number and constriction ratio are increased, ow is divided into more loops symmetrically with respect to the axes.

scholarly journals Industrial Automation using Zigbee Communication Protocol

2019 ◽  
Vol 8 (3) ◽  
pp. 7240-7243
Keyword(s):  
Wireless Communication ◽  
Ieee 802.11 ◽  
Industrial Application ◽  
Lower Cost ◽  
Communication Protocol ◽  
Industrial Applications ◽  
Video Content ◽  
Industrial Automation ◽  
Future Work ◽  
Wired Communication

If we compare wireless communication over wired communication, wireless communication offer more advantages when compared to wired communication such as lower cost, fast deployment, higher flexibility & scalability and mobile nature of system communicated wirelessly. In Industrial automation, industrial communication has very challenging requirements like packet deadline, low transmission jitter, etc. In some places wired communication is only accepted and it cannot be replaced by wireless communication. Industrial applications also run more flexible requirements applications such as email, Video content or any other application. Those services are known as Best Effort (BE) services. In order to do both the industrial application and BE services we have proposed Zigbee communication together with the IEEE 802.11 standard in this article along with comparison between the two standards using physical layer solutions. This Zigbee communication is performed using a industrial automation design and it leads to less power consumption. Result and analysis in terms of real time services is left as a future work in this paper. It is proposed that through Zigbee solution it is possible to obtain better result in certain cases than those achieved using IEEE 802.11 standards.

Sign in / Sign up

Export Citation Format

Share Document