Experimental Investigations on DI Diesel Engine With Low Heat Rejection Combustion Chamber With Waste Fried Vegetable Oil and its Biodiesel

2015 ◽  
Author(s):  
Raavi Peraiah Chowdary ◽  
Maddali V. S. Murali Krishna ◽  
T. Kishen Kumar Reddy ◽  
D. Srikanth ◽  
P. V. Krishna Murthy ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Combustion Chamber ◽  
Vegetable Oil ◽  
Alternative Fuels ◽  
Air Gap ◽  
Operating Conditions ◽  
Injection Timing ◽  
Heat Rejection ◽  
Improved Performance ◽  
Ci Engines

Biodiesels derived from vegetable oils present a very promising alternative fuels for diesel fuel, since they have numerous advantages compared to fossil fuels. However crude vegetable oil and biodiesel have high viscosity and low volatility causing combustion problems in CI engines, call for engine with hot combustion chamber. Investigations were carried out on single–cylinder, four–stroke, water cooled, 3.68 kW direct injection diesel engine at a speed of 1500 rpm to evaluate the performance of a engine with low heat rejection (LHR) combustion chamber. It consisted of an air gap (3 mm) insulated piston with superni (an alloy of nickel) crown and an air gap (3 mm) insulated liner with superni insert and ceramic coated cylinder head fuelled with different operating conditions (normal temperature and preheated temperature) of waste fried vegetable oil and its biodiesel with varied injection timing and injector opening pressure. Engine with LHR combustion chamber with biodiesel showed improved performance over conventional engine (CE) at 27° bTDC and at optimum injection timing. Biodiesel showed improved performance over crude vegetable oil with engine with both versions of the combustion chamber. Preheated test fuels and increase of injection pressure showed reduction of pollution levels and marginally improved performance over normal test fuels.

Experimental Investigations on DI Diesel Engine With Low Heat Rejection Combustion Chamber With Carbureted Ethanol and Crude Jatropha Oil

2015 ◽  
Author(s):  
Vencherla V. R. Seshagiri Rao ◽  
Maddali V. S. Murali Krishna ◽  
T. Kishen Kumar Reddy ◽  
D. Srikanth ◽  
P. V. Krishna Murthy
Keyword(s):  
Diesel Engine ◽  
Combustion Chamber ◽  
Vegetable Oil ◽  
Air Gap ◽  
Injection Timing ◽  
Jatropha Oil ◽  
Heat Rejection ◽  
Full Load ◽  
Full Load Operation ◽  
Ci Engines

It has been found that the vegetable oils and alcohols (ethanol and methanol) are promising substitute fuels for diesel fuel, because they are renewable in nature. However drawbacks associated with crude vegetable oil (high viscosity and low volatility) and ethanol (low cetane number and low energy content) which cause combustion problems in CI engines, call for engine with hot combustion chamber. Investigations were carried out on single–cylinder, four–stroke, water cooled, 3.68 kW direct injection diesel engine at a speed of 1500 rpm to evaluate the performance of a engine with medium grade low heat rejection (LHR) combustion chamber. It consisted of an air gap insulated piston and an air gap insulated liner fuelled with crude jatropha oil and carbureted ethanol with varied injection timing and injector opening pressure. Carbureted ethanol was inducted into the engine through a variable jet carburetor. This carburetor was installed at the inlet manifold of the engine and ethanol was inducted at different percentages of crude vegetable oil at full load operation on mass basis. Aldehydes (measured by dinitrophenyl hydrazine method), particulate emissions and oxides of nitrogen were measured at full load operation of the engine. With maximum induction of ethanol, engine with LHR combustion chamber showed improved performance over conventional engine at 27°bTDC and optimized injection timing.

Experimental Studies on Diesel Engine with Piston Crown Modification Using an Optimum Alternative Fuel

2015 ◽  
Vol 813-814 ◽  
pp. 830-835
Author(s):  
Akkaraju H. Kiran Theja ◽  
Rayapati Subbarao
Keyword(s):  
Diesel Engine ◽  
Combustion Chamber ◽  
Experimental Studies ◽  
Alternative Fuel ◽  
Air Gap ◽  
The Body ◽  
Injection Timing ◽  
Positive Trend ◽  
Piston Crown ◽  
Karanja Oil

The drawbacks associated with bio-fuels can be minimized by making modifications to combustion chamber. Modification of combustion chamber is achieved by providing an air gap in between the crown and the body of the piston with the top crown made of low thermal conductivity material. Experimentation is carried on a diesel engine with brass as piston crown material and karanja as test fuel, which is found to be a better alternative fuel based on the tests carried out prior to modification. Investigations are carried out on the performance of the engine with modified combustion chamber consisting of air gap insulated piston with 2 mm air gap with brass crown when fuelled with karanja oil. Comparative studies are made between the two configurations of engine with and without modification at an injection timing of 29obTDC. Performance, heat balance and emission plots are made with respect to brake power. Fuel consumption increased with modification. The mechanical and volumetric efficiencies are similar in both the cases. Indicated and brake thermal efficiencies got reduced with modification. But, it is good to see that HC and CO emissions are showing positive trend. Thus, the present investigation hints the possibility of improvements while making piston modification and providing air gap insulation.

Performance Evaluation of a Low Heat Rejection Diesel Engine with Jatropha Oil

2013 ◽  
Vol 11 ◽  
pp. 27-44 ◽  
Author(s):  
N. Janardhan ◽  
M.V.S. Murali Krishna ◽  
P. Ushasri ◽  
P.V.K. Murthy
Keyword(s):  
Diesel Engine ◽  
Thermal Efficiency ◽  
Peak Pressure ◽  
Air Gap ◽  
Injection Timing ◽  
Jatropha Oil ◽  
Opening Pressure ◽  
Brake Thermal Efficiency ◽  
Heat Rejection ◽  
Diesel Operation

Investigations were carried out to evaluate the performance of a low heat rejection (LHR) diesel engine consisting of air gap insulated piston with 3-mm air gap, with superni (an alloy of nickel) crown, air gap insulated liner with superni insert and ceramic coated cylinder head with different operating conditions of crude jatropha oil (CJO) with varied injection timing and injector opening pressure . Performance parameters [brake thermal efficiency, exhaust gas temperature, coolant load and volumetric efficienc and exhaust emissions [smoke and oxides of nitroge were determined at various values of brake mean effective pressure (BMEP). Combustion characteristics [ peak pressure, time of occurrence of peak pressure and maximum rate of pressure ris of the engine were at peak load operation of the engine. Conventional engine (CE) showed deteriorated performance, while LHR engine showed improved performance with vegetable operation at recommended injection timing and pressure. The performance of both versions of the engine improved with advanced injection timing and higher injector opening pressure when compared with CE with pure diesel operation. Relatively, peak brake thermal efficiency increased by 14%, smoke levels decreased by 27% and NOx levels increased by 49% with vegetable oil operation on LHR engine at its optimum injection timing, when compared with pure diesel operation on CE at manufacturers recommended injection timing.

scholarly journals The effect of alternative fuels injection timing on toxic substances formation in CI engines

2017 ◽  
Vol 168 (1) ◽  
pp. 73-76
Author(s):  
Marcin WOJS ◽  
Piotr ORLIŃSKI ◽  
Jakub LASOCKI
Keyword(s):  
Diesel Fuel ◽  
Alternative Fuels ◽  
Fuel Injection ◽  
Combustion Process ◽  
Acid Methyl Ester ◽  
Operating Conditions ◽  
Injection Timing ◽  
Toxic Substances ◽  
Important Conclusion ◽  
Ci Engines

The present study describes selected issues associated with the emission level in toxic exhaust gases and fuel injection timing. The study was focused on the following types of fuels: Diesel oil (the base fuel) and the other fuels were the mixture of fatty acid methyl ester with Camelina (L10 – diesel fuel with 10% V/V FAME of Camelina and L20 – diesel fuel with 10% V/V FAME of Camelina) was used. Fuel injection advanced angle was set for three different values – the factory setting – 12° before TDC, later injection – 7° and earlier injection – 17°. The most important conclusion is that in most measurement points registered in the same engine operating conditions, the concentration of fuel NOx in L10 and L20 increased but PM emissions decreased which is caused by active oxygen located in the internal structure of the fuel. This fact contributes to the rise in temperature during the combustion process. At the same time factory settings of the angle makes NOx emissions lower and close to reference fuel.

scholarly journals Effect of Injection timing on diesel engine performance, combustion and emission characteristics operated with Dairy Scum Biodiesel

2018 ◽  
Author(s):  
Manjunath Channappagoudra ◽  
K Ramesh ◽  
Manavendra G
Keyword(s):  
Diesel Engine ◽  
Experimental Work ◽  
Alternative Fuels ◽  
Energy Savings ◽  
Engine Performance ◽  
Second Phase ◽  
Injection Timing ◽  
Emission Characteristics ◽  
Fuel Blend ◽  
Improved Performance

Treating of dairy waste scum into fuel will be the very beneficial for milk dairies in terms of energy savings, reduction of hazardous emissions and independency on foreign fuels. This new approach of developing and utilization of dairy scum oil methyl ester is highly pronounced in the field of alternative fuels for diesel engines. In the present study experimental work attempts to unfold the influence of DSOME blends and injection timing (IT) on the performance, emission and combustion characteristics of diesel engine. In the first phase of experimental work effect of different blends namely DSOME-B10, DSOME-B20, DSOME-B30 and DSOME-B100 are studied and compared with petroleum diesel. In second phase of experimental work different injection timings namely 20.deg.bTDC, 23.deg.bTDC, 26.deg.bTDC and 29.deg.bTDC are studied and compared with standard engine. From first phase of experimental works its revealed that significant improvement of brake thermal efficiency, brake specific fuel consumption and reduced HC, CO emissions are observed for DSOME-B20 blend hence it is optimized and carried to the second phase of the work to optimize the injection timing. From second phase of experimental results it is concluded that 26.deg.bTDC IT for DSOME-B20 operation shown the improved performance, combustion and emission characteristics among other ITs hence it is optimized for DSOME-B20 fuel blend.

scholarly journals Performance Evaluation of a Low-Grade Low-Heat-Rejection Diesel Engine with Crude Pongamia oil

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Ch. Kesava Reddy ◽  
M. V. S. Murali Krishna ◽  
P. V. K. Murthy ◽  
T. Ratna Reddy
Keyword(s):  
Diesel Engine ◽  
Cylinder Head ◽  
Peak Load ◽  
Injection Pressure ◽  
Operating Conditions ◽  
Injection Timing ◽  
Low Grade ◽  
Heat Rejection ◽  
Pongamia Oil ◽  
Diesel Operation

Investigations are carried out to evaluate the performance of a low heat rejection (LHR) diesel engine with ceramic coated cylinder head [ceramic coating of thickness 500 microns is done on inside portion of cylinder head] with different operating conditions [normal temperature and pre-heated temperature] of crude Pongamia oil (CPO) with varied injection pressure and injection timing. Performance parameters and pollution levels are determined at various magnitudes of brake mean effective pressure. Combustion characteristics at peak load operation of the engine are measured with special pressure-crank angle software package. Conventional engine (CE) showed deteriorated performance, while LHR engine showed improved performance with CPO operation at recommended injection timing and pressure and the performance of both version of the engine is improved with advanced injection timing and at higher injection pressure when compared with CE with pure diesel operation. The optimum injection timing is 31°bTDC for conventional engine while it is 29°bTDC with LHR engine with vegetable oil operation. Peak brake thermal efficiency increased by 5%, smoke levels decreased by 2% and NOx levels increased by 40% with CPO operation on LHR engine at its optimum injection timing, when compared with pure diesel operation on CE at manufacturer’s recommended injection timing.

Two-Stroke Marine Diesel Engine Variable Injection Timing System Performance Evaluation and Optimum Setting for Minimum Fuel Consumption at Acceptable NOx Levels

2014 ◽  
Author(s):  
Dimitrios T. Hountalas ◽  
Spiridon Raptotasios ◽  
Antonis Antonopoulos ◽  
Stavros Daniolos ◽  
Iosif Dolaptzis ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Nox Emissions ◽  
Pressure Measurements ◽  
Cylinder Pressure ◽  
Start Of Injection

Currently the most promising solution for marine propulsion is the two-stroke low-speed diesel engine. Start of Injection (SOI) is of significant importance for these engines due to its effect on firing pressure and specific fuel consumption. Therefore these engines are usually equipped with Variable Injection Timing (VIT) systems for variation of SOI with load. Proper operation of these systems is essential for both safe engine operation and performance since they are also used to control peak firing pressure. However, it is rather difficult to evaluate the operation of VIT system and determine the required rack settings for a specific SOI angle without using experimental techniques, which are extremely expensive and time consuming. For this reason in the present work it is examined the use of on-board monitoring and diagnosis techniques to overcome this difficulty. The application is conducted on a commercial vessel equipped with a two-stroke engine from which cylinder pressure measurements were acquired. From the processing of measurements acquired at various operating conditions it is determined the relation between VIT rack position and start of injection angle. This is used to evaluate the VIT system condition and determine the required settings to achieve the desired SOI angle. After VIT system tuning, new measurements were acquired from the processing of which results were derived for various operating parameters, i.e. brake power, specific fuel consumption, heat release rate, start of combustion etc. From the comparative evaluation of results before and after VIT adjustment it is revealed an improvement of specific fuel consumption while firing pressure remains within limits. It is thus revealed that the proposed method has the potential to overcome the disadvantages of purely experimental trial and error methods and that its use can result to fuel saving with minimum effort and time. To evaluate the corresponding effect on NOx emissions, as required by Marpol Annex-VI regulation a theoretical investigation is conducted using a multi-zone combustion model. Shop-test and NOx-file data are used to evaluate its ability to predict engine performance and NOx emissions before conducting the investigation. Moreover, the results derived from the on-board cylinder pressure measurements, after VIT system tuning, are used to evaluate the model’s ability to predict the effect of SOI variation on engine performance. Then the simulation model is applied to estimate the impact of SOI advance on NOx emissions. As revealed NOx emissions remain within limits despite the SOI variation (increase).

scholarly journals Performance evaluation of common rail direct injection (CRDI) engine fuelled with Uppage Oil Methyl Ester (UOME)

2015 ◽  
Vol 4 (1) ◽  
pp. 1-10 ◽  
Author(s):  
D.N. Basavarajappa ◽  
N. R. Banapurmath ◽  
S.V. Khandal ◽  
G. Manavendra
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Diesel Engines ◽  
High Speed ◽  
Alternative Fuels ◽  
High Pressures ◽  
Fuel Injection ◽  
Injection Timing ◽  
Engine Operation ◽  
Performance And Emission

For economic and social development of any country energy is one of the most essential requirements. Continuously increasing price of crude petroleum fuels in the present days coupled with alarming emissions and stringent emission regulations has led to growing attention towards use of alternative fuels like vegetable oils, alcoholic and gaseous fuels for diesel engine applications. Use of such fuels can ease the burden on the economy by curtailing the fuel imports. Diesel engines are highly efficient and the main problems associated with them is their high smoke and NOx emissions.  Hence there is an urgent need to promote the use of alternative fuels in place of high speed diesel (HSD) as substitute. India has a large agriculture base that can be used as a feed stock to obtain newer fuel which is renewable and sustainable. Accordingly Uppage oil methyl ester (UOME) biodiesel was selected as an alternative fuel. Use of biodiesels in diesel engines fitted with mechanical fuel injection systems has limitation on the injector opening pressure (300 bar). CRDI system can overcome this drawback by injecting fuel at very high pressures (1500-2500 bar) and is most suitable for biodiesel fuels which are high viscous. This paper presents the performance and emission characteristics of a CRDI diesel engine fuelled with UOME biodiesel at different injection timings and injection pressures. From the experimental evidence it was revealed that UOME biodiesel yielded overall better performance with reduced emissions at retarded injection timing of -10° BTDC in CRDI mode of engine operation.

scholarly journals Experimental investigation on performance, smoke and exhaust gas analysis of four stroke diesel engine using pongomia/neem oil biodiesel

2021 ◽  
Vol 12 (4) ◽  
pp. 23-40
Author(s):  
Naresh Kumar Konada ◽  
K.N.S. Suma ◽  
B.B. Ashok Kumar
Keyword(s):  
Diesel Engine ◽  
Energy Demand ◽  
Alternative Fuels ◽  
Gas Analysis ◽  
Load Test ◽  
Transport Sector ◽  
Exhaust Gas ◽  
Neem Oil ◽  
Fuel Blends ◽  
Ci Engines

Increase in energy demand, stringent emission norms and depletion of oil resources led to the discovery of alternative fuels forinternal combustion engines. Many alternative fuels like alcohols, petroleum gas, and compressed natural gas have been alreadycommercialized in the transport sector. In the present work, Pongomia oil and Neem oil are blended with diesel and used as analternate fuel for CI engines. The Pongomia oil and Neem oil can be converted into bio diesel using a chemical process of trans- esterification.Different proportions of fuel blends have been produced by the process of blending bio diesel consisting of 10%, 15%, 20%, 25%, and 30% (B10, B15, B20, B25, B30). The fuel properties of each blend are determined. The load test along with smoke and exhaust gas analysis of 4- Stroke Diesel engine using the blends of Pongomia oil and Neem oil with diesel are done in this study. The performance parameters of an engine are calculated for different blends. The sustainability of using alternate fuels in Diesel engines, especially the potential use of Pongomia oil and Neem oil as biodiesel have been brought to the fore through this work and suitable blends of bio diesel is suggested from the results. Keywords: 4-Stroke Diesel Engine, Pongomia and Neem oil Bo diesel, Performance, Smoke and exhaust gas analysis.

Investigations on Low Heat Rejection Diesel Engine With Crude Jatropha Oil as an Alternate Fuel

2002 ◽  
Author(s):  
M. V. S. Murali Krishna ◽  
C. M. Vara Prasad ◽  
Tandur Rajashekar ◽  
Supriya Tiwari ◽  
T. Sujani
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Injection Pressure ◽  
High Viscosity ◽  
Injection Timing ◽  
Jatropha Oil ◽  
Heat Rejection ◽  
Reduction Of Nox ◽  
Conventional Diesel Fuel ◽  
Diesel Operation

Jatropha oil, a non-edible vegetable oil shows a greater potential for replacing conventional diesel fuel quite effectively, as its properties are compatible to that of diesel fuel. But low volatility and high viscosity of jatropha oil call for hot combustion chamber, which is provided by a low heat rejection diesel engine with threaded air gap piston and liner with superni-90 inserts. The performance of the engine with jatropha oil is obtained with different versions of the engine such as conventional engine and insulated engine at normal and preheat condition of the oil, with varying injection pressure and timing and compared to the engine with pure diesel operation at recommended injection pressure and timing. Increase of thermal efficiency of 18% and reduction of NOx levels by 5% are observed at optimized injection timing and at higher injection pressure with insulated engine at preheat condition of jatropha oil in comparison with pure diesel operation on conventional engine.

Sign in / Sign up

Export Citation Format

Share Document