A Simplified Method for Response Behavior and Reliability Analysis of Long Submerged Structures With Tension Legs in Irregular Waves

2002 ◽  
Author(s):  
Shinji Katsura ◽  
Hiroo Okada ◽  
Koji Masaoka ◽  
Takashi Tsubogo ◽  
Kiko Shimada
Keyword(s):  
Limit State ◽  
Experimental Studies ◽  
Estimation Method ◽  
Dynamic Responses ◽  
Irregular Waves ◽  
Elastic Response ◽  
Tunnel Structure ◽  
Wave Loads ◽  
Response Behavior ◽  
Wave Conditions

This paper deals with the elastic response behavior of marine tunnel structures with tension legs in regular and irregular waves. Firstly, a simplified estimation method for dynamic responses under regular wave conditions is analytically presemed using a simple beam on an elastic foundation. Then, in order to demonstrate the validity of above results, experimental studies are carried out for a marine tunnel structure model with tension legs under wave-induced loads. Next, a simplified estimation method is presented for the elastic response behavior under irregular wave conditions by using above analytical results and combining irregular sea wave spectra. Then, the limit state failure mode of the main structure is presented for estimating the reliability level for cracking failure under extreme wave loads. Finally, the applicability of the methods is investigated through numerical examples carried out for a 1,000m-class marine tunnel structure with tension legs under some irregular sea state conditions. And characteristics of the short-term responses and reliability levels for the cracking failure are numerically shown.

A Study on Structural Design of Huge Barge Structures Based on Collapsing Behavior and Reliability Analysis

2003 ◽  
Author(s):  
Shinji Katsura ◽  
Hiroo Okada ◽  
Koji Masaoka ◽  
Takashi Tsubogo
Keyword(s):  
Reliability Analysis ◽  
Structural Reliability ◽  
Limit State ◽  
Estimation Method ◽  
Bending Moment ◽  
Irregular Waves ◽  
Elastic Response ◽  
Design Parameters ◽  
Reliability Based Design ◽  
Calculation Results

This paper deals with the limit state and reliability analysis of huge barge structures (HBS) which are supposed floating refuse storage and incineration plant based on collapsing behavior analysis in irregular waves as a part of studies on structural reliability-based design methods. First, a limit state and reliability analysis method is shortly presented for the buckling and ultimate collapse strength of deck, bulkhead and bottom panels of HBS. Next, a simplified method is briefly introduced for collapsing behavior and reliability analysis of HBS under extreme sea loads by using a developed system combined with a finite element method and plastic node method using hexahedral element models. Moreover, a simplified estimation method is shortly introduced for the probabilistic load model considering the hydro-elastic response of the structure in irregular waves. Finally, dominant limit state modes of 1,000m-class HBS under combined loads with bending moment, shearing force and lateral pressure are obtained by applying the above methods. Then, the features of the collapsing behavior and reliability level are investigated by using above calculation results. Effects of statistical values such as reduction of thickness due to corrosion, yield stress and design parameters are also investigated using sensitivity analysis.

scholarly journals Wave Load Mitigation by Perforation of Monopiles

2020 ◽  
Vol 8 (5) ◽  
pp. 352
Author(s):  
Jacob Andersen ◽  
Rune Abrahamsen ◽  
Thomas Andersen ◽  
Morten Andersen ◽  
Torben Baun ◽  
...  
Keyword(s):  
Limit State ◽  
Large Diameter ◽  
Irregular Waves ◽  
Wave Loads ◽  
Wave Load ◽  
Limit States ◽  
Wave Flume ◽  
Deep Waters ◽  
Physical Model Tests ◽  
Fatigue Limit State

The design of large diameter monopiles (8–10 m) at intermediate to deep waters is largely driven by the fatigue limit state and mainly due to wave loads. The scope of the present paper is to assess the mitigation of wave loads on a monopile by perforation of the shell. The perforation design consists of elliptical holes in the vicinity of the splash zone. Wave loads are estimated for both regular and irregular waves through physical model tests in a wave flume. The test matrix includes waves with Keulegan–Carpenter ( K C ) numbers in the range 0.25 to 10 and covers both fatigue and ultimate limit states. Load reductions in the order of 6%–20% are found for K C numbers above 1.5. Significantly higher load reductions are found for K C numbers less than 1.5 and thus the potential to reduce fatigue wave loads has been demonstrated.

scholarly journals Numerical Study on Sectional Loads and Structural Optimization of an Elastic Semi-Submersible Floating Platform

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 182
Author(s):  
Yuliang Liu ◽  
Takeshi Ishihara
Keyword(s):  
Structural Optimization ◽  
Numerical Study ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Irregular Waves ◽  
Offshore Wind Turbine ◽  
Elastic Model ◽  
Water Tank ◽  
Wave Loads ◽  
Tank Test

This study investigates the sectional loads on an elastic semi-submersible platform for a 2 MW FOWT (floating offshore wind turbine) used in the Fukushima demonstration project. A water tank test is firstly carried out with an elastic model to study the dynamic responses and sectional loads of the platform in regular and irregular waves. Numerical simulations are then performed using multiple hydrodynamic bodies connected by elastic beams. The dynamic responses of the elastic model are compared to those of a rigid model to clarify the influence of the structural stiffness on the platform motion and mooring tension. The predicted sectional loads on the deck, brace and pontoon by the proposed nonlinear hydrodynamic models show good agreement with the experimental data obtained from the water tank test and a simplified formula is proposed to evaluate the distribution of the moments on the platform. Finally, the structural optimization of the elastic semi-submersible platform is conducted. The sectional moments and fatigue loadings on the pontoons are significantly reduced using the strut between the pontoons since the horizontal wave loads on the side column are dominant and the vertical wave loads acting on the platform are relatively small due to the deep draft.

A Method for Structural Design of Pontoon Type VLFS Based on Collapse Behavior and Reliability Analysis

2004 ◽  
Author(s):  
Hiroo Okada ◽  
Koji Masaoka ◽  
Takashi Tsubogo ◽  
Shinji Katsura ◽  
Shin-Ichi Kawamata
Keyword(s):  
Reliability Analysis ◽  
Lateral Pressure ◽  
Limit State ◽  
Plate Thickness ◽  
Estimation Method ◽  
Bending Moment ◽  
Irregular Waves ◽  
Design Parameters ◽  
Load Effect ◽  
Collapse Behavior

This paper deals with a simplified method for the preliminary design of pontoon-type very large floating structures (VLFS), which are supposed floating airport, based on collapse behavior and reliability analysis in irregular waves. Firstly, a simplified estimation method is presented for the probabilistic load effect model of VLFS under irregular sea-state conditions. Next, limit state conditions are shortly presented for the buckling and ultimate collapse strength of stiffened plates under combined compression, shear and lateral pressure in the deck, bulkhead and bottom parts of VLFS, especially, by using a simplified estimation formula. Then, the validity is shown by non-linear finite element method. Finally, dominant limit state modes of 5,000m-class VLFS under combined loads with bending moment, shear force and lateral pressure are obtained by applying the above methods. Then, the features of the collapse behavior and reliability level are investigated by using above calculation results. Effects of design parameters such as yield stress, plate thickness, stiffener and bulkhead space are also investigated using sensitivity analysis.

scholarly journals LABORATORY SIMULATIONS OF WAVE ATTENUATION BY AN EMERGENT VEGETATION OF ARTIFICIAL PHRAGMITES AUSTRALIS: AN EXPERIMENTAL STUDY OF AN OPEN-CHANNEL WAVE FLUME

2015 ◽  
Vol 23 (4) ◽  
pp. 251-266 ◽  
Author(s):  
Li YIPING ◽  
Desmond Ofosu ANIM ◽  
Ying WANG ◽  
Chunyang TANG ◽  
Wei DU ◽  
...  
Keyword(s):  
Experimental Study ◽  
Phragmites Australis ◽  
Wave Height ◽  
Plant Density ◽  
Wave Attenuation ◽  
Emergent Vegetation ◽  
Irregular Waves ◽  
Shore Protection ◽  
Near Shore ◽  
Wave Conditions

This paper presents a well-controlled laboratory experimental study to evaluate wave attenuation by artificial emergent plants (Phragmites australis) under different wave conditions and plant stem densities. Results showed substantial wave damping under investigated regular and irregular wave conditions and also the different rates of wave height and within canopy wave-induced flows as they travelled through the vegetated field under all tested conditions. The wave height decreased by 6%–25% at the insertion of the vegetation field and towards the downstream at a mean of 0.2 cm and 0.32 cm for regular and irregular waves respectively. The significant wave height along the vegetation field ranged from 0.89–1.76 cm and 0.8–1.28 cm with time mean height of 1.38 cm and 1.11 cm respectively for regular and irregular waves. This patterns as affected by plant density and also location from the leading edge of vegetation is investigated in the study. The wave energy attenuated by plant induced friction was predicted in terms of energy dissipation factor (fe) by Nielsen’s (1992) empirical model. Shear stress as a driving force of particle resuspension and the implication of the wave attenuation on near shore protection from erosion and sedimentation was discussed. The results and findings in this study will advance our understanding of wave attenuation by an emergent vegetation of Phragmites australis, in water system engineering like near shore and bank protection and restoration projects and also be employed for management purposes to reduce resuspension and erosion in shallow lakes.

Structural Safety Assessment of a 1100 TEU Container Ship, Based on a Enhanced Long Term Fatigue Analysis

2014 ◽  
Vol 1036 ◽  
pp. 935-940
Author(s):  
Leonard Domnisoru ◽  
Ionica Rubanenco ◽  
Mihaela Amoraritei
Keyword(s):  
Safety Assessment ◽  
Safety Evaluation ◽  
Irregular Waves ◽  
Structural Safety ◽  
Random Wave ◽  
Wave Loads ◽  
Strength Assessment ◽  
Integrated Method ◽  
Hydroelastic Response

This paper is focused on an enhanced integrated method for structural safety assessment of maritime ships under extreme random wave loads. In this study is considered an 1100 TEU container test ship, with speed range 0 to 18 knots. The most comprehensive criteria for ships structural safety evaluation over the whole exploitation life is based on the long term ship structures analysis, that includes: stress hot-spots evaluation by 3D/1D-FEM hull models, computation of short term ship dynamic response induced by irregular waves, long term fatigue structure assessment. The analysis is enhanced by taking into account the ships speed influence on hydroelastic response. The study includes a comparative analysis on two scenarios for the correlation between the ships speed and waves intensity. The standard constant ship speed scenario and CENTEC scenario, with total speed loss at extreme waves condition, are considered. Instead of 20 years ship exploitation life estimated by classification societies rules from the long term structural safety criteria, the enhanced method has predicted more restrictive values of 14.4-15.7 years. The numerical analyses are based on own software and user subroutines. The study made possible to have a more realistic approach of ships structural strength assessment, for elastic and faster ships as container carriers, in compare to the standard one based only on naval rules, delivering a method with higher confidence in the designed structural safety.

Analysis on the Performance of Deckwetness of Sandglass-type and Cylindrical Floating Bodies

2016 ◽  
Vol 60 (03) ◽  
pp. 145-155
Author(s):  
Ya-zhen Du ◽  
Wen-hua Wang ◽  
Lin-lin Wang ◽  
Yu-xin Yao ◽  
Hao Gao ◽  
...  
Keyword(s):  
Transfer Functions ◽  
Linear Response Theory ◽  
Second Order ◽  
Irregular Waves ◽  
Wave Loads ◽  
Floating Bodies ◽  
Drift Motion ◽  
First Order ◽  
Series Of Experiments ◽  
Deck Wetness

In this paper, the influence of the second-order slowly varying loads on the estimation of deck wetness is studied. A series of experiments related to classic cylindrical and new sandglass-type Floating Production, Storage, and Offloading Unit (FPSO) models are conducted. Due to the distinctive configuration design, the sand glass type FPSO model exhibits more excellent deck wetness performance than the cylindrical one in irregular waves. Based on wave potential theory, the first-order wave loads and the full quadratic transfer functions of second-order slowly varying loads are obtained by the frequency-domain numerical boundary element method. On this basis, the traditional spectral analysis only accounting for the first-order wave loads and time-domain numerical simulation considering both the first-order wave loads and nonlinear second-order slowly varying wave loads are employed to predict the numbers of occurrence of deck wetness per hour of the two floating models, respectively. By comparing the results of the two methods with experimental data, the shortcomings of traditional method based on linear response theory emerge and it is of great significance to consider the second-order slowly drift motion response in the analysis of deck wetness of the new sandglass-type FPSO.

Estimation of Track Irregularity Based on Genetic Algorithm and Unscented Kalman Filtering

2012 ◽  
Author(s):  
Hongmei Shi ◽  
Zujun Yu
Keyword(s):  
Genetic Algorithm ◽  
Kalman Filtering ◽  
High Speed ◽  
Measurement Data ◽  
Estimation Method ◽  
Coupling Model ◽  
Dynamic Responses ◽  
The Real ◽  
True Value ◽  
Track Irregularity

Track irregularity is the main excitation source of wheel-track interaction. Due to the difference of speed, axle load and suspension parameters between track inspection train and the operating trains, the data acquired from the inspection car cannot completely reflect the real status of track irregularity when the operating trains go through the rail. In this paper, an estimation method of track irregularity is proposed using genetic algorithm and Unscented Kalman Filtering. Firstly, a vehicle-track vertical coupling model is established, in which the high-speed vehicle is assumed as a rigid body with two layers of spring and damping system and the track is viewed as an elastic system with three layers. Then, the static track irregularity is estimated by genetic algorithm using the vibration data of vehicle and dynamic track irregularity which are acquired from the inspection car. And the dynamic responses of vehicle and track can be solved if the static track irregularity is known. So combining with vehicle track coupling model of different operating train, the potential dynamic track irregularity is solved by simulation, which the operating train could goes through. To get a better estimation result, Unscented Kalman Filtering (UKF) algorithm is employed to optimize the dynamic responses of rail using measurement data of vehicle vibration. The simulation results show that the estimated static track irregularity and the vibration responses of vehicle track system can go well with the true value. It can be realized to estimate the real rail status when different trains go through the rail by this method.

scholarly journals NON-BREAKING AND BREAKING WAVE LOADS ON A COOLING WATER OUTFALL

1978 ◽  
Vol 1 (16) ◽  
pp. 148
Author(s):  
G.R. Mogridge ◽  
W.W. Jamieson
Keyword(s):  
Water Level ◽  
Cooling Water ◽  
High Water ◽  
Breaking Waves ◽  
Irregular Waves ◽  
Scale Model ◽  
Breaking Wave ◽  
Wave Loads ◽  
Eastern Canada ◽  
Spilling Breakers

Cooling water from a power generating station in Eastern Canada is pumped to an outfall and distributed into the ocean through discharge ports in the sidewalls of a diffuser cap. The cap is essentially a shell-type structure consisting of a submerged circular cylinder 26.5 ft in diameter and 14 ft high. It is located in 25 ft of water at low water level and 54 ft at high water level. Horizontal forces, vertical forces and overturning moments exerted by waves on a 1:36 scale model of the diffuser cap were measured with and without cooling water discharging from the outfall. Tests were run with regular and irregular waves producing both non-breaking and breaking wave loads on the diffuser cap. The overturning moments measured on the diffuser cap were up to 150 percent greater than those on a solid submerged cylinder sealed to the seabed. Unlike sealed cylinders, all of the wave loads measured on the relatively open structure reached maximum values at approximately the same time. The largest wave loads were measured on the diffuser structure when it was subjected to spilling breakers at low water level. For a given wave height, the spilling breakers caused wave loads up to 100 percent greater than those due to non-breaking waves.

scholarly journals WAVE LOADS ON HORIZONTAL CYLINDERS

1978 ◽  
Vol 1 (16) ◽  
pp. 147
Author(s):  
P. Holmes ◽  
J.R. Chaplin
Keyword(s):  
Oscillatory Flow ◽  
Vertical Plane ◽  
Vertical Cylinder ◽  
Irregular Waves ◽  
Wave Loads ◽  
Incident Flow ◽  
Cylinder Axis ◽  
Straight Line ◽  
Horizontal Cylinders ◽  
Wave Induced

The problem of predicting wave induced loads on cylinders is an enormously complex one. It is clear from the scatter present in most experimental determinations of force coefficients that there are many individual factors which influence the mechanisms of flow induced loading. Among these are some, for instance Reynolds number, separation and periodic vortex shedding, which are inter-related and whose influences cannot be studied in isolation. Others, such as shear flow, irregular waves and free surface effects, can at least be eliminated in the laboratory, in order to approach an understanding of the more fundamental characteristics of the flow. A vertical cylinder in uniform waves experiences an incident flow field which can be described in terms of rotating velocity and acceleration vectors, always in the same vertical plane, containing also the cylinder axis, whose magnitudes are functions of time and of position along the length of the cylinder. Some of the essential features of this flow can be studied under two-dimensional oscillatory conditions, in which either the cylinder or the fluid is oscillated relative to the other along a straight line (planar oscillatory flow). The incident velocity and acceleration vectors are then always concurrent, normal to the cylinder axis, and oscillating in magnitude with time.

Sign in / Sign up

Export Citation Format

Share Document