Recent Advances in In-Situ Ocean Observation

Author(s):  
H. H. Shih

Ocean observation has evolved tremendously, from collection and exchange of weather and sea state information by ocean going ships in the late 19th century to today’s multisensor, multi-platform, multi-disciplinary, large scale observation networks. Data are now transmitted and disseminated automatically in real-time to a variety of user groups with significant social and economical implications. This paper provides an overview of representative advances in in-situ ocean observation during the past decade. Major driving forces and representative advances and trends in in-situ observation are described. Advances are discussed under the categories of observation infrastructure and major measurement system components including sensor, platform, data collection and telemetry, and power supply. The U.S. National Oceanic and Atmospheric Administration (NOAA) is a major participant of the global ocean observation programs and examples of its contributions and activities are introduced.

2021 ◽  
Vol 13 (7) ◽  
pp. 1335
Author(s):  
Ronald Souza ◽  
Luciano Pezzi ◽  
Sebastiaan Swart ◽  
Fabrício Oliveira ◽  
Marcelo Santini

The Brazil–Malvinas Confluence (BMC) is one of the most dynamical regions of the global ocean. Its variability is dominated by the mesoscale, mainly expressed by the presence of meanders and eddies, which are understood to be local regulators of air-sea interaction processes. The objective of this work is to study the local modulation of air-sea interaction variables by the presence of either a warm (ED1) and a cold core (ED2) eddy, present in the BMC, during September to November 2013. The translation and lifespans of both eddies were determined using satellite-derived sea level anomaly (SLA) data. Time series of satellite-derived surface wind data, as well as these and other meteorological variables, retrieved from ERA5 reanalysis at the eddies’ successive positions in time, allowed us to investigate the temporal modulation of the lower atmosphere by the eddies’ presence along their translation and lifespan. The reanalysis data indicate a mean increase of 78% in sensible and 55% in latent heat fluxes along the warm eddy trajectory in comparison to the surrounding ocean of the study region. Over the cold core eddy, on the other hand, we noticed a mean reduction of 49% and 25% in sensible and latent heat fluxes, respectively, compared to the adjacent ocean. Additionally, a field campaign observed both eddies and the lower atmosphere from ship-borne observations before, during and after crossing both eddies in the study region during October 2013. The presence of the eddies was imprinted on several surface meteorological variables depending on the sea surface temperature (SST) in the eddy cores. In situ oceanographic and meteorological data, together with high frequency micrometeorological data, were also used here to demonstrate that the local, rather than the large scale forcing of the eddies on the atmosphere above, is, as expected, the principal driver of air-sea interaction when transient atmospheric systems are stable (not actively varying) in the study region. We also make use of the in situ data to show the differences (biases) between bulk heat flux estimates (used on atmospheric reanalysis products) and eddy covariance measurements (taken as “sea truth”) of both sensible and latent heat fluxes. The findings demonstrate the importance of short-term changes (minutes to hours) in both the atmosphere and the ocean in contributing to these biases. We conclude by emphasizing the importance of the mesoscale oceanographic structures in the BMC on impacting local air-sea heat fluxes and the marine atmospheric boundary layer stability, especially under large scale, high-pressure atmospheric conditions.


2021 ◽  
Author(s):  
Romain Escudier ◽  
Emanuela Clementi ◽  
Mohamed Omar ◽  
Andrea Cipollone ◽  
Jenny Pistoia ◽  
...  

<p>In order to be able to predict the future ocean climate and weather, it is crucial to understand what happened in the past and the mechanisms responsible for the ocean variability. This is particularly true in a complex area such as the Mediterranean Sea with diverse dynamics such as deep convection and thermohaline circulation or coastal hydrodynamics. To this end, effective tools are reanalyses or reconstructions of the past ocean state. </p><p>Here we present a new physical reanalysis of the Mediterranean Sea at high resolution, developed in the Copernicus Marine Environment Monitoring Service (CMEMS) framework. The hydrodynamic model is based on the Nucleus for European Modelling of the Ocean (NEMO) combined with a variational data assimilation scheme (OceanVar).</p><p>The model has a horizontal resolution of 1/24<strong>°</strong> and 141 vertical z* levels and provides daily and monthly 3D values of temperature, salinity, sea level and currents. Hourly ECMWF ERA-5 atmospheric fields force the model and daily boundary conditions in the Atlantic are taken from the global CMCC C-GLORS reanalysis. 39 rivers model the freshwater input to the basin plus the Dardanelles. The reanalysis covers 33-years, initialized from SeaDataNet climatology in January 1985, getting to a nominal state after a two-years spin-up and ending in 2019. In-situ data from CTD, ARGO floats and XBT are assimilated into the model in combination with satellite altimetry data.</p><p>This reanalysis has been validated and assessed through comparison to in-situ and satellite observations as well as literature climatologies. The results show an overall improvement of the skill and a better representation of the main dynamics of the region compared to the previous, lower resolution (1/16<strong>°</strong>) reanalysis. Temperature and salinity RMSE is decreased by respectively 12% and 20%. The deeper biases in salinity of the previous version are corrected and the new reanalysis present a better representation of the deep convection in the Gulf of Lion. Climate signals show continuous increase of the temperature due to climate change but also in salinity.</p><p>The new reanalysis will allow the study of physical processes at multi-scales, from the large scale to the transient small mesoscale structures.</p>


Author(s):  
Shuchang Wang ◽  
Binbin Shao ◽  
Junlian Qiao ◽  
Xiaohong Guan

Abstract The past two decades have witnessed the rapid development and wide application of Fe(VI) in the field of water de-contamination because of its environmentally benign character. Fe(VI) has been mainly applied as a highly efficient oxidant/disinfectant for the selective elimination of contaminants. The in situ generated iron(III) (hydr)oxides with the function of adsorption/coagulation can further increase the removal of contaminants by Fe(VI) in some cases. Because of the limitations of Fe(VI) per se, various modified methods have been developed to improve the performance of Fe(VI) oxidation technology. Based on the published literature, this paper summarized the current views on the intrinsic properties of Fe(VI) with the emphasis on the self-decay mechanism of Fe(VI). The applications of Fe (VI) as a sole oxidant for decomposing organic contaminants rich in electron-donating moieties, as a bi-functional reagent (both oxidant and coagulant) for eliminating some special contaminants, and as a disinfectant for inactivating microorganisms were systematically summarized. Moreover, the difficulties in synthesizing and preserving Fe(VI), which limits the large-scale application of Fe (VI), and the potential formation of toxic byproducts during Fe(VI) application were presented. This paper also systematically reviewed the important nodes in developing methods to improve the performance of Fe(VI) as oxidant or disinfectant in the past two decades, and proposed the future research needs for the development of Fe(VI) technologies.


Langmuir ◽  
2010 ◽  
Vol 26 (1) ◽  
pp. 384-388 ◽  
Author(s):  
Dong Wook Kim ◽  
In-Sun Cho ◽  
Jin Young Kim ◽  
Hae Lin Jang ◽  
Gill Sang Han ◽  
...  

2011 ◽  
Vol 45 (1) ◽  
pp. 9-18 ◽  
Author(s):  
Joel M. Levy ◽  
Derrick Snowden ◽  
Candyce Clark ◽  
Kathleen Crane ◽  
Howard J. Diamond ◽  
...  

AbstractThe global ocean observing system for climate, which comprises the global in situ component of the U.S. Integrated Ocean Observing System, has now achieved about 61% of its initial design goal. Although this observing system, implemented cooperatively by over 70 countries worldwide, serves multiple applications, it is designed primarily to address climate requirements defined by the international Global Climate Observing System. The U.S. contribution to the system, described here, is implemented as an interdependent set of observational subsystems that constitute about half of the over 8,000 observing platforms deployed by the world community. Although much work remains to complete the initial global observing system, scientific advances of the past decade have identified the need to deploy a second-generation system that integrates biogeochemical and ecological observations with the primarily physical and carbon-related oceanographic observations that form the backbone of the initial observing system.


2021 ◽  
Vol 9 ◽  
Author(s):  
Romain Escudier ◽  
Emanuela Clementi ◽  
Andrea Cipollone ◽  
Jenny Pistoia ◽  
Massimiliano Drudi ◽  
...  

In order to be able to forecast the weather and estimate future climate changes in the ocean, it is crucial to understand the past and the mechanisms responsible for the ocean variability. This is particularly true in a complex area such as the Mediterranean Sea with diverse dynamics like deep convection and overturning circulation. To this end, effective tools are ocean reanalyses or reconstructions of the past ocean state. Here we present a new physical reanalysis of the Mediterranean Sea at high resolution, developed in the Copernicus Marine Environment Monitoring Service (CMEMS) framework. The hydrodynamic model is based on the Nucleus for European Modelling of the Ocean (NEMO) combined with a variational data assimilation scheme (OceanVar). The model has a horizontal resolution of 1/24° and 141 unevenly distributed vertical z* levels. It provides daily and monthly temperature, salinity, current, sea level and mixed layer depth as well as hourly fields for surface velocities and sea level. ECMWF ERA-5 atmospheric fields force the model and daily boundary conditions in the Atlantic are taken from a global reanalysis. The reanalysis covers the 33 years from 1987 to 2019. Initialized from SeaDataNet climatology in January 1985, it reaches a nominal state after a 2-years spin-up. In-situ data from CTD, ARGO floats and XBT are assimilated into the model in combination with satellite altimetry observations. This reanalysis has been validated and assessed through comparison to in-situ and satellite observations as well as literature climatologies. The results show an overall improvement of the comparison with observations and a better representation of the main dynamics of the region compared to a previous, lower resolution (1/16°), reanalysis. Temperature and salinity RMSD are decreased by respectively 14 and 18%. The salinity biases at depth of the previous version are corrected. Climate signals show continuous increase of the temperature and salinity, confirming estimates from observations and other reanalysis. The new reanalysis will allow the study of physical processes at multi-scales, from the large scale to the transient small mesoscale structures and the selection of climate indicators for the basin.


2013 ◽  
Vol 10 (4) ◽  
pp. 1127-1167 ◽  
Author(s):  
P. Y. Le Traon

Abstract. The launch of the US/French mission Topex/Poseidon (T/P) (CNES/NASA) in August 1992 was the start of a revolution in oceanography. For the first time, a very precise altimeter system optimized for large scale sea level and ocean circulation observations was flying. T/P alone could not observe the mesoscale circulation. In the 1990s, the ESA satellites ERS-1/2 were flying simultaneously with T/P. Together with my CLS colleagues, we demonstrated that we could use T/P as a reference mission for ERS-1/2 and bring the ERS-1/2 data to an accuracy level comparable to T/P. Near real time high resolution global sea level anomaly maps were then derived. These maps have been operationally produced as part of the SSALTO/DUACS system for the last 15 yr. They are now widely used by the oceanographic community and have contributed to a much better understanding and recognition of the role and importance of mesoscale dynamics. Altimetry needs to be complemented with global in situ observations. In the end of the 90s, a major international initiative was launched to develop Argo, the global array of profiling floats. This has been an outstanding success. Argo floats now provide the most important in situ observations to monitor and understand the role of the ocean on the earth climate and for operational oceanography. This is a second revolution in oceanography. The unique capability of satellite altimetry to observe the global ocean in near real time at high resolution and the development of Argo were essential to the development of global operational oceanography, the third revolution in oceanography. The Global Ocean Data Assimilation Experiment (GODAE) was instrumental in the development of the required capabilities. This paper provides an historical perspective on the development of these three revolutions in oceanography which are very much interlinked. This is not an exhaustive review and I will mainly focus on the contributions we made together with many colleagues and friends.


Ocean Science ◽  
2013 ◽  
Vol 9 (5) ◽  
pp. 901-915 ◽  
Author(s):  
P. Y. Le Traon

Abstract. The launch of the French/US mission Topex/Poseidon (T/P) (CNES/NASA) in August 1992 was the start of a revolution in oceanography. For the first time, a very precise altimeter system optimized for large-scale sea level and ocean circulation observations was flying. T/P alone could not observe the mesoscale circulation. In the 1990s, the ESA satellites ERS-1/2 were flying simultaneously with T/P. Together with my CLS colleagues, we demonstrated that we could use T/P as a reference mission for ERS-1/2 and bring the ERS-1/2 data to an accuracy level comparable to T/P. Near-real-time high-resolution global sea level anomaly maps were then derived. These maps have been operationally produced as part of the SSALTO/DUACS system for the last 15 yr. They are now widely used by the oceanographic community and have contributed to a much better understanding and recognition of the role and importance of mesoscale dynamics. Altimetry needs to be complemented with global in situ observations. At the end of the 90s, a major international initiative was launched to develop Argo, the global array of profiling floats. This has been an outstanding success. Argo floats now provide the most important in situ observations to monitor and understand the role of the ocean on the earth climate and for operational oceanography. This is a second revolution in oceanography. The unique capability of satellite altimetry to observe the global ocean in near-real-time at high resolution and the development of Argo were essential for the development of global operational oceanography, the third revolution in oceanography. The Global Ocean Data Assimilation Experiment (GODAE) was instrumental in the development of the required capabilities. This paper provides an historical perspective on the development of these three revolutions in oceanography which are very much interlinked. This is not an exhaustive review and I will mainly focus on the contributions we made together with many colleagues and friends.


Ocean Science ◽  
2012 ◽  
Vol 8 (5) ◽  
pp. 845-857 ◽  
Author(s):  
S. Guinehut ◽  
A.-L. Dhomps ◽  
G. Larnicol ◽  
P.-Y. Le Traon

Abstract. This paper describes an observation-based approach that efficiently combines the main components of the global ocean observing system using statistical methods. Accurate but sparse in situ temperature and salinity profiles (mainly from Argo for the last 10 yr) are merged with the lower accuracy but high-resolution synthetic data derived from satellite altimeter and sea surface temperature observations to provide global 3-D temperature and salinity fields at high temporal and spatial resolution. The first step of the method consists in deriving synthetic temperature fields from altimeter and sea surface temperature observations, and salinity fields from altimeter observations, through multiple/simple linear regression methods. The second step of the method consists in combining the synthetic fields with in situ temperature and salinity profiles using an optimal interpolation method. Results show the revolutionary nature of the Argo observing system. Argo observations now allow a global description of the statistical relationships that exist between surface and subsurface fields needed for step 1 of the method, and can constrain the large-scale temperature and mainly salinity fields during step 2 of the method. Compared to the use of climatological estimates, results indicate that up to 50% of the variance of the temperature fields can be reconstructed from altimeter and sea surface temperature observations and a statistical method. For salinity, only about 20 to 30% of the signal can be reconstructed from altimeter observations, making the in situ observing system essential for salinity estimates. The in situ observations (step 2 of the method) further reduce the differences between the gridded products and the observations by up to 20% for the temperature field in the mixed layer, and the main contribution is for salinity and the near surface layer with an improvement up to 30%. Compared to estimates derived using in situ observations only, the merged fields provide a better reconstruction of the high resolution temperature and salinity fields. This also holds for the large-scale and low-frequency fields thanks to a better reduction of the aliasing due to the mesoscale variability. Contribution of the merged fields is then illustrated to describe qualitatively the temperature variability patterns for the period from 1993 to 2009.


1995 ◽  
Vol 22 (2) ◽  
pp. 341 ◽  
Author(s):  
PG Falkowski ◽  
Z Kolber

The ocean is optically thin and lends itself to large-scale measurements of in vivo chlorophyll fluorescence. In the open ocean, however, phytoplankton chlorophyll concentrations average only 0.2 μg L-1, and hence high sensitivity is required for precise measurements of the fluorescence yields. Over the past decade, we have developed two approaches to achieve the required sensitivity; these are the pump- and probe-technique and a fast repetition rate (FRR) method. Both methods have been adapted for in situ studies and are used to rapidly measure the maximum change in the quantum yield (Δ�max) of photosystem II (PSII), as well as the effective absorption cross-section of PSII (σPSII). Sections of variable fluorescence across the Pacific and Atlantic Oceans reveal the influence of geophysical processes in controlling the quantum yields of phytoplankton photosynthesis. Areas of upwelling, such as off the coast of north-westem Africa, have Fv/Fm values of 0.65, which are close to the maximum achievable values in nutrient-replete cultures. Throughout most of the nutrient-deficient central ocean basins, this quantum efficiency is reduced by more than 50%. In high-nutrient, low- chlorophyll regions of the eastern Equatorial Pacific, the deliberate, large-scale addition of nanomolar iron directly to the ocean leads to a rapid increase in quantum efficiency of the natural phytoplankton community, thereby revealing that in these regions phytoplankton photosynthetic energy conversion efficiency is iron limited. Diel patterns of variation in the upper ocean display midday, intensity- dependent reductions in both upsII and A�max. We interpret the former as indicative of non- photochemical quenching in the antenna, while the latter is a consequence of both rapidly reversible and slowly reversible damage to reaction centres. From knowledge of the incident spectral irradiance, Δ�max, σPSII, and photochemical quenching, the absolute photosynthetic electron transport rate can be derived in real-time. Using unattended, moored continuous measurements of in vivo fluorescence parameters, the derived in situ electron transport rates can be related to satellite observations of the global ocean with basin-scale, seasonal estimates of phytoplankton carbon fixation. Thus, unlike any other photosynthetic parameter, chlorophyll fluorescence can be used to bridge the scales of biophysical responses to ecosystem dynamics.


Sign in / Sign up

Export Citation Format

Share Document