Improving the Anisotropy of Collagen by Electric Field Increases Its Toughness by Two-Fold

Author(s):  
Xingguo Cheng ◽  
Nicholas Wasserman ◽  
Ozan Akkus

Collagen is the major structural protein in the connective tissues such as skin, bone, ligaments, and tendons. The specific hierarchical organization of collagen molecules determines the unique properties of each specific tissue. For example, in tendon, the parallel alignment of collagen molecules, fibrils, fibril bundles, fascicles and tendon units gives tendon good mechanical properties. Thus, in vitro engineering of collagen molecules hold great promise as a tissue regeneration material. However, there is a need for mechanically superior collagenous structures, which currently cannot be provided by isotropic gels which lack defined orientation. Increasing the anisotropy of gels would increase the strength of collagenous constructs tremendously.

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 61 ◽  
Author(s):  
Yannan Liu ◽  
Juan Gu ◽  
Daidi Fan

A novel, three-dimensional, porous, human-like collagen (HLC)/nano-hydroxyapatite (n-HA) scaffold cross-linked by 1,2,7,8-diepoxyoctane (DEO) was successfully fabricated, which showed excellent mechanical and superior biological properties for bone tissue regeneration in this study. The physicochemical characterizations of different n-HA/HLC/DEO (nHD) scaffolds were investigated by determining the morphology, compression stress, elastic modulus, Young’s modulus and enzymatic hydrolysis behavior in vitro. The results demonstrated that nHD-2 and nHD-3 scaffolds showed superior mechanical properties and resistance to enzymatic hydrolysis compared to nHD-1 scaffolds. The cell viability, live cell staining and cell adhesion analysis results demonstrated that nHD-2 scaffolds exhibited low cytotoxicity and excellent cytocompatibility compared with nHD-1 and nHD-3 scaffolds. Furthermore, subcutaneous injections of nHD-2 scaffolds in rabbits produced superior anti-biodegradation effects and histocompatibility compared with injections of nHD-1 and nHD-3 scaffolds after 1, 2 and 4 weeks. In addition, the repair of bone defects in rabbits demonstrated that nHD-2 scaffolds presented an improved ability for guided bone regeneration and reconstruction compared to commercially available bone scaffold composite hydroxyapatite/collagen (HC). Collectively, the results show that nHD-2 scaffolds show promise for application in bone tissue engineering due to their excellent mechanical properties, anti-biodegradation, anti-biodegradation, biocompatibility and bone repair effects.


2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Naznin Sultana ◽  
Tareef Hayat Khan

For bone tissue regeneration, composite scaffolds containing biodegradable polymers and nanosized osteoconductive bioceramics have been regarded as promising biomimetic systems. Polymer blends of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and poly(L-lactic acid) (PLLA) can be used as the polymer matrix to control the degradation rate. In order to render the scaffolds osteoconductive, nano-sized hydroxyapatite (nHA) particles can be incorporated into the polymer matrix. In the first part of this study, a factorial design approach to investigate the influence of materials on the initial compressive mechanical properties of the scaffolds was studied. In the second part, the protein adsorption behavior and the attachment and morphology of osteoblast-like cells (Saos-2) of the scaffoldsin vitrowere also studied. It was observed that nHA incorporated PHBV/PLLA composite scaffolds adsorbed more bovine serum albumin (BSA) protein than PHBV or PHBV/PLLA scaffolds.In vitrostudies also revealed that the attachment of human osteoblastic cells (SaOS-2) was significantly higher in nHA incorporated PHBV/PLLA composite scaffolds. From the SEM micrographs of nHA incorporated PHBV/PLLA composite scaffolds seeded with SaOS-2 cells after a 7-day cell culture period, it was observed that the cells were well expanded and spread in all directions on the scaffolds.


Blood ◽  
2015 ◽  
Vol 126 (23) ◽  
pp. 2400-2400
Author(s):  
Renata Giardini Rosa ◽  
Juares E. Romero Bianco ◽  
Gabriela Pereira dos Santos ◽  
Stephen D. Waldman ◽  
Joanna Weber ◽  
...  

Abstract Background: The idea of studying bone marrow outside its native environment is attractive and ideal. Due to the many functions of extracellular matrix (ECM), currently there is an interest in creating an environment that mimics the ECM present in the tissue, similar to the microenvironment in vivo. Molds replacing the ECM (scaffolds) have a porous structure and may assist the tissue regeneration by forming a suitable environment for adhesion, migration, proliferation and cellular differentiation. The appropriate ECM is a key factor as ECM proteins are site-specific and provide protein 'footprints' of previous resident cells. Because ECM proteins are among the most conserved proteins, the removal of xenogenic/allogenic cellular contents via decellularization could theoretically produce an essentially minimally immunogenic scaffold with a native intact structure for new tissue regeneration. Thus, the search for a scaffold that could be used to assess the behavior of cells and their interactions with the ECM in vitro/in vivo, and has different niches in its composition is highly desirable. Aims: In recent years, a large number of molecular and cytogenetic abnormalities have been identified in AML, MDS and multiple myeloma, many of these defects can serve as markers for diagnosis/prognosis or as therapeutic targets. However, there are still many unknown molecular factors involved in genetic abnormalities or signaling pathways that contribute to the pathogenesis of the disease. Another very important aspect of these diseases is that they all are related to the mutual interaction of neoplastic cells and the microenvironment of bone marrow. In the absence of an ideal model or even the difficulty in reproduce a native environment, we proposed the characterization of a natural scaffold, from bovine bone marrow, which can be used as a study model, previously patented by our laboratory. Materials and Methods: Bone marrow was decellularized by one or more incubations in an enzymatic digestion solution and polar solvent extractions, comprising an extracellular matrix with well-preserved 3D structure. Scaffolds were analyzed after the decelularization process for potential changes in structure (TEM, SEM, Histological staining, and immunohistochemistry for collagen III, IV, fibronectin) and mechanical properties. To verify if the scaffold would hold and support cell survival and extracellular matrix production, an in vitro study was performed using CD34+ (non-stromal) and HS-5 (stromal) cells. Cell-seeded decellularized scaffolds were cultured for 7-14 days and analyzed for Histological staining. Results: Histology sections (H&E staining), TEM and SEM demonstrated the structure and ultrastructure of the processed matrix and confirmed both cellular extraction and preservation of the macroscopic 3-D architecture of the collagen fibers, blood vessels, and preservation of an organized matrix. Also, the decellularized scaffold was quite comparable to the native tissue in terms of its mechanical properties. Immunohistochemistry of the scaffold showed that the main components of the ECM were preserved. The in vitro experiments of both stromal cells (HS-5) and non-stromal cells (CD34+) demonstrated that they were able to adhere and in the HS-5 case also produce ECM during 7-14 days of culture. In both cases, an increase in cell number was observed and CD34+ overtime formed cluster and with 14 days of culture the cluster formation increased in size. Conclusions: The results demonstrated that the decellularization process was efficient in keeping a 3-D structure and mechanical properties with a well-organized-preserved ECM. In vitro experiments showed that both CD34+ and HS-5 were able to proliferate and adhere in specific sites of the scaffold, suggesting that they were able to recognize their native environment. HS-5 produced ECM indicating that the scaffold worked as an optimal microenvironment. In conclusion, the scaffold could be used as a model, which has the potential to mimic the native microenvironment to enable research/studies of factors that are involved in self-renewal and maintenance of neoplastic cells in bone marrow. Also, this model could be very useful for pharmacological testing of bone marrow in vitro. Disclosures No relevant conflicts of interest to declare.


2012 ◽  
Vol 442 (1) ◽  
pp. 57-60 ◽  
Author(s):  
M. A. Semashko ◽  
D. V. Rakitina ◽  
I. González ◽  
T. Canto ◽  
N. O. Kalinina ◽  
...  

Author(s):  
Nima Saeidi ◽  
Jeffrey W. Ruberti

Load-bearing tissues owe their mechanical properties to the presence of highly-organized arrays of collagen fibrils. Aligned lamellae in cornea and aligned fascicles in tendon are the best examples of collagen fibrillar organization at the macroscopic level. The process by which collagen is organized in the extracellular matrix (ECM) is still unclear. But it is generally thought to be facilitated locally via “fibripositors” or cell surface “crypts”. According to this theory, fibroblasts create bounded “compartments” in the ECM through which they deposit organized groups of fibrils (in the form of lamellae in the cornea and in the form of fascicles in the tendon) [1, 2]. An alternative hypothesis proposed by Marie Giraud-Guille suggests that fibroblasts concentrate collagen monomers to form cholesteric liquid crystalline patterns that resemble those found in collagenous matrices in vivo [3–8]. Such organization has been demonstrated in vitro using extracted collagen monomers. However, the data presented in these studies focuses principally on the alignment of the collagen molecules and not on the organization and resulting morphology of condensed collagen fibrils. Considering that matrix mechanical properties in vivo are the result of the fibrillar alignment and not the alignment of individual molecules, further investigation of cholesterically organized condensed fibrils and their morphology is necessary.


2020 ◽  
Vol 2 (11) ◽  
Author(s):  
Yuan Chai ◽  
Xiao-Bo Chen ◽  
Donghai Zhang ◽  
Joseph Lynch ◽  
Nick Birbilis ◽  
...  

AbstractPatient-specific surgical guides are increasingly demanded. Material Extrusion (ME) is a popular 3D printing technique to fabricate personalized surgical guides. However, the ME process usually generates deleterious surface topography which is not suitable for orthopaedic emergencies. We designed and optimized parametric combinations of a laser polishing approach as post process to improve the surface quality of ME-made poly-lactic acid (PLA) objects. In this study, we investigated the contribution of processing variables to the mechanical properties and the biocompatibilities in vitro of the ME-made PLA objects. Conventional surface grinding was conducted as comparison. The results demonstrate that the ME-made PLA samples exhibit good mechanical properties and favourable biocompatibility after being post processed using laser polishing. The post laser polishing, as a powerful tool in manufacture of ME-made PLA objects, will open a new approach with a great promise in its applications in personalized and timely management of medical emergencies.


Biomolecules ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1208
Author(s):  
Laura P. Frazão ◽  
Joana Vieira de Castro ◽  
Cristina Nogueira-Silva ◽  
Nuno M. Neves

Although some placenta-derived products are already used for tissue regeneration, the human chorion membrane (HCM) alone has been poorly explored. In fact, just one study uses decellularized HCM (dHCM) with native tissue architecture (i.e., without extracellular matrix (ECM) suspension creation) as a substrate for cell differentiation. The aim of this work is to fully characterize the dHCM for the presence and distribution of cell nuclei, DNA and ECM components. Moreover, mechanical properties, in vitro biological performance and in vivo biocompatibility were also studied. Our results demonstrated that the HCM was successfully decellularized and the main ECM proteins were preserved. The dHCM has two different surfaces, the reticular layer side and the trophoblast side; and is biocompatible both in vitro and in vivo. Importantly, the in vivo experiments demonstrated that on day 28 the dHCM starts to be integrated by the host tissue. Altogether, these results support the hypothesis that dHCM may be used as a biomaterial for different tissue regeneration strategies, particularly when a membrane is needed to separate tissues, organs or other biologic compartments.


Author(s):  
Vipuil Kishore ◽  
Mousa Younesi ◽  
Stefi Panit ◽  
Ozan Akkus

The molecules of the extracellular matrix in connective tissues are densely packed. Biofabrication methods to attain such molecular packing density are limited and electrochemical processing (EP) of monomeric collagen solutions is one of few means to attain molecular packing. During EP, the pH gradient between electrodes drives the electrophoretic mobility of collagen molecules toward the isoelectric point where molecules are compacted. Our earlier work used linear electrodes to fabricate highly aligned crosslinked collagen fibers for tendon tissue engineering [1–4]. Prior work compared electrocompacted-aligned matrices with uncompacted randomly oriented ones. Therefore, the effects of alignment and compaction were compounded in terms of assessing cell response. So as to take the matrix alignment variable out of the picture to investigate matrix compaction effects only, we employed disc shaped electrodes to obtain electrocompacted sheets which lack matrix alignment. The current study investigated: a) the degree of compaction, b) effect of compaction on the mechanical properties of the sheets, and, c) mesenchymal stem cell (MSC) proliferation and morphology on compacted sheets relative to uncompacted collagen gels.


2017 ◽  
Vol 758 ◽  
pp. 132-137 ◽  
Author(s):  
Francesca Scalera ◽  
Francesca Gervaso ◽  
Barbara Palazzo ◽  
Stefania Scialla ◽  
Daniela Izzo ◽  
...  

Two different approaches are proposed in this study to enhance the bioactivity of hydroxyapatite-based scaffolds for bone tissue regeneration. The first method consists in a structural modification of Hydroxyapatite (HA) through doping it with Magnesium (1,3% wt) while the second one in using HA in combination with a calcium silicate, i.e. Wollastonite (WS), to form a composite bioceramic. Scaffolds with high and strongly interconnected porosity (pores ranging from 300 to 800 µm) were produced throughout both procedures. Higher mechanical properties in compression were obtained when the composite Ws/HA bioceramic was adopted. That one showed a weight loss after 6 months in physiological solution seven times higher than doped HA. Preliminary in vitro tests highlighted that both kinds of scaffold allowed the adhesion of MG63, without significant differences in terms of vitality, indicating a good biocompatibility of both used biomaterials.


Sign in / Sign up

Export Citation Format

Share Document