A Three-Dimensional Cinematographic Analysis of the Fastball and Curveball Pitches in Baseball

1986 ◽  
Vol 2 (1) ◽  
pp. 20-28 ◽  
Author(s):  
Bruce Elliott ◽  
J. Robert Grove ◽  
Barry Gibson ◽  
B. Thurston
Keyword(s):  
Motion Analysis ◽  
Linear Transformation ◽  
Kinematic Analysis ◽  
High Speed ◽  
Stride Length ◽  
Three Dimensional ◽  
High Speed Photography ◽  
Anatomical Features ◽  
Balance Point

Three-dimensional (3-D) high speed photography was used to record the fastball (FB) and curveball (CB) actions of six members of the Australian National pitching squad. The direct linear transformation (DLT) method of motion analysis for 3-D space reconstruction from 2-D images was used to record the movement of selected anatomical features. Laterally positioned phase-locked cameras operating at 200 fps and a front-on camera operating at 300 fps were used to record the pitching action. Mean pitching velocities for the FB and the CB were recorded. A kinematic analysis of the two pitching motions from the first balance point following the completion of the pump and pivot to follow through are presented. The actions are very similar for the two pitches, as would be expected if disguised to confuse the batter. Minor differences were noted, however, for stride length, forearm action prior to release, and wrist action at release.

Age-Related Differences in Throwing Techniques Used by the Catcher in Baseball

1994 ◽  
Vol 6 (3) ◽  
pp. 225-235 ◽  
Author(s):  
Shinji Sakurai ◽  
Bruce Elliott ◽  
J. Robert Grove
Keyword(s):  
High Speed ◽  
High Performance ◽  
Age Groups ◽  
Three Dimensional ◽  
Transformation Method ◽  
High Speed Photography ◽  
Two Phase ◽  
Ball Speed ◽  
Age Related ◽  
Release Speed

Three-dimensional (3-D) high speed photography was used to record the overarm throwing actions of five open-age, four 18-year-old, six 16-year- old, and six 14-year-old high-performance baseball catchers. The direct linear transformation method was used for 3-D space reconstruction from 2-D images of the catchers throwing from home plate to second base recorded using two phase-locked cameras operating at a nominal rate of 200 Hz. Selected physical capacity measures were also recorded and correlated with ball release speed. In general, anthropometric and strength measures significantly increased through the 14-year-old to open-age classifications, while a range of correlation coefficients from .50 to .84 was recorded between these physical capacities and ball speed at release. While many aspects of the kinematic data at release were similar, the key factors of release angle and release speed varied for the different age groups.

scholarly journals Conceptual Design and Computational Modeling Analysis of a Single-Leg System of a Quadruped Bionic Horse Robot Driven by a Cam-Linkage Mechanism

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Liangwen Wang ◽  
Weiwei Zhang ◽  
Caidong Wang ◽  
Fannian Meng ◽  
Wenliao Du ◽  
...  
Keyword(s):  
Motion Analysis ◽  
Kinematic Analysis ◽  
Degrees Of Freedom ◽  
Structural Parameters ◽  
Three Dimensional ◽  
Kinematic Modeling ◽  
Linkage Mechanism ◽  
Vector Method ◽  
Pressure Angle ◽  
End Point

In this study, the configuration of a bionic horse robot for equine-assisted therapy is presented. A single-leg system with two degrees of freedom (DOFs) is driven by a cam-linkage mechanism, and it can adjust the span and height of the leg end-point trajectory. After a brief introduction on the quadruped bionic horse robot, the structure and working principle of a single-leg system are discussed in detail. Kinematic analysis of a single-leg system is conducted, and the relationships between the structural parameters and leg trajectory are obtained. On this basis, the pressure angle characteristics of the cam-linkage mechanism are studied, and the leg end-point trajectories of the robot are obtained for several inclination angles controlled by the rotation of the motor for the stride length adjusting. The closed-loop vector method is used for the kinematic analysis, and the motion analysis system is developed in MATLAB software. The motion analysis results are verified by a three-dimensional simulation model developed in Solidworks software. The presented research on the configuration, kinematic modeling, and pressure angle characteristics of the bionic horse robot lays the foundation for subsequent research on the practical application of the proposed bionic horse robot.

New method to evaluate three-dimensional push-off angle during short-track speed skating using wearable inertial measurement unit sensors

2019 ◽  
Vol 233 (4) ◽  
pp. 476-480 ◽  
Author(s):  
Kyungsoo Kim ◽  
Jun Seok Kim ◽  
Tserenchimed Purevsuren ◽  
Batbayar Khuyagbaatar ◽  
SuKyoung Lee ◽  
...  
Keyword(s):  
Motion Analysis ◽  
Inertial Measurement Unit ◽  
High Speed ◽  
Three Dimensional ◽  
Analysis Data ◽  
New Method ◽  
Measurement Unit ◽  
Angle Estimation ◽  
Inertial Measurement ◽  
Speed Skating

The push-off mechanism to generate forward movement in skating has been analyzed by using high-speed cameras and specially designed skates because it is closely related to skater performance. However, using high-speed cameras for such an investigation, it is hard to measure the three-dimensional push-off force, and a skate with strain gauges is difficult to implement in the real competitions. In this study, we provided a new method to evaluate the three-dimensional push-off angle in short-track speed skating based on motion analysis using a wearable motion analysis system with inertial measurement unit sensors to avoid using a special skate or specific equipment insert into the skate for measurement of push-off force. The estimated push-off angle based on motion analysis data was very close to that based on push-off force with a small root mean square difference less than 6% when using the lateral marker in the left leg and the medial marker in the right leg regardless of skating phase. These results indicated that the push-off angle estimation based on motion analysis data using a wearable motion capture system of inertial measurement unit sensors could be acceptable for realistic situations. The proposed method was shown to be feasible during short-track speed skating. This study is meaningful because it can provide a more acceptable push-off angle estimation in real competitive situations.

Experimental and Numerical Study of Hydrodynamic Cavitation of Orifice Plates with Multiple Triangular Holes

2012 ◽  
Vol 256-259 ◽  
pp. 2519-2522 ◽  
Author(s):  
Zhi Yong Dong ◽  
Qi Qi Chen ◽  
Yong Gang Yang ◽  
Bin Shi
Keyword(s):  
Velocity Profile ◽  
High Speed ◽  
Numerical Study ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Orifice Plate ◽  
Hydrodynamic Cavitation ◽  
High Speed Photography ◽  
Hydraulic Characteristics ◽  
Image Velocimetry

Hydraulic characteristics of orifice plates with multiple triangular holes in hydrodynamic cavitation reactor were experimentally investigated by use of three dimensional particle image velocimetry (PIV), high speed photography, electronic multi-pressure scanivalve and pressure data acquisition system, and numerically simulated by CFD software Flow 3D in this paper. Effects of number, arrangement and ratio of holes on hydraulic characteristics of the orifice plates were considered. Effects of arrangement and ratio of holes and flow velocity ahead of plate on cavitation number and velocity profile were compared. Distribution of turbulent kinetic energy and similarity of velocity profile were analyzed. And characteristics of cavitating flow downstream of the orifice plate were photographically observed by high speed camera. Also, a comparison with flow characteristics of orifice plate with hybrid holes (circle, square and triangle) was made.

Experiment and Numerical Simulation of Extrudate Swell in the Polymer Extrusion Process

2011 ◽  
Vol 314-316 ◽  
pp. 401-404 ◽  
Author(s):  
Min Zhang ◽  
Chuan Zhen Huang ◽  
Guo Wen Chen ◽  
Yu Xi Jia
Keyword(s):  
Numerical Simulation ◽  
High Speed ◽  
Three Dimensional ◽  
Simulation Method ◽  
Extrusion Process ◽  
High Speed Photography ◽  
The Finite Element Method ◽  
Polymer Extrusion ◽  
Extrudate Swell ◽  
Rate Profile

The extrudate swell of the polymer extrusion process was studied with the experiment and simulation method. The extrudate swell process was recorded by the high-speed photography apparatus. The swell rate at the different time was calculated. It is found that the extrudate swell rate increase at the first five seconds. The maximum swell rate is about 4.37%. The three-dimensional numerical simulation model of the experiment die path was founded. The extrusion process including the extrudate swell was simulated used the Finite Element Method. Such simulated results as the velocity vector, the shear rate profile and the end of the swell zone were analyzed. The extrudate swell end got by the simulation is similar with the experiment result.

scholarly journals Kinematic Analysis of a Clamp-Type Picking Device for an Automatic Pepper Transplanter

Agriculture ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 627 ◽  
Author(s):  
Md Nafiul Islam ◽  
Md Zafar Iqbal ◽  
Mohammod Ali ◽  
Milon Chowdhury ◽  
Md Shaha Nur Kabir ◽  
...  
Keyword(s):  
Kinematic Analysis ◽  
High Speed ◽  
Model Simulation ◽  
Mechanical Damage ◽  
Maximum Velocity ◽  
Operating Conditions ◽  
High Speed Photography ◽  
Virtual Model ◽  
Significant Difference ◽  
Simulation And Validation

Pepper is one of the most vital agricultural products with high economic value, and pepper production needs to satisfy the growing worldwide population by introducing automatic seedling transplantation techniques. Optimal design and dimensioning of picking device components for an automatic pepper transplanter are crucial for efficient and effective seedling transplantation. Therefore, kinematic analysis, virtual model simulation, and validation testing of a prototype were conducted to propose a best-suited dimension for a clamp-type picking device. The proposed picking device mainly consisted of a manipulator with five grippers and a picking stand. To analyze the influence of design variables through kinematic analysis, 250- to 500-mm length combinations were considered to meet the trajectory requirements and suit the picking workspace. Virtual model simulation and high-speed photography tests were conducted to obtain the kinematic characteristics of the picking device. According to the kinematic analysis, a 350-mm picking stand and a 380-mm manipulator were selected within the range of the considered combinations. The maximum velocity and acceleration of the grippers were recorded as 1.1, 2.2 m/s and 1.3, 23.7 m/s2, along the x- and y-axes, respectively, for 30 to 90 rpm operating conditions. A suitable picking device dimension was identified and validated based on the suitability of the picking device working trajectory, velocity, and acceleration of the grippers, and no significant difference (p ≤ 0.05) occurred between the simulation and validation tests. This study indicated that the picking device under development would increase the pepper seedling picking accuracy and motion safety by reducing the operational time, gripper velocity, acceleration, and mechanical damage.

scholarly journals The impact of pelvic lateral rotation on hindlimb kinematics and stride length in the red-legged running frog, Kassina maculata

2019 ◽  
Vol 6 (5) ◽  
pp. 190060 ◽  
Author(s):  
Amber J. Collings ◽  
Laura B. Porro ◽  
Cameron Hill ◽  
Christopher T. Richards
Keyword(s):  
High Speed ◽  
Stride Length ◽  
Reference Frames ◽  
Comparative Anatomy ◽  
Three Dimensional ◽  
Video Data ◽  
The Body ◽  
Kinematic Models ◽  
Lateral Rotation ◽  
The Impact

Some frog species, such as Kassina maculata (red-legged running frog), use an asynchronous walking/running gait as their primary locomotor mode. Prior comparative anatomy work has suggested that lateral rotation of the pelvis improves walking performance by increasing hindlimb stride length; however, this hypothesis has never been tested. Using non-invasive methods, experimental high-speed video data collected from eight animals were used to create two three-dimensional kinematic models. These models, each fixed to alternative local anatomical reference frames, were used to investigate the hypothesis that lateral rotation of the mobile ilio-sacral joint in the anuran pelvis plays a propulsive role in walking locomotion by increasing hindlimb stride length. All frogs used a walking gait (duty factor greater than 0.5) despite travelling over a range of speeds (0.04–0.23 m s −1 ). The hindlimb joint motions throughout a single stride were temporally synchronized with lateral rotation of the pelvis. The pelvis itself, on average, underwent an angular excursion of 12.71° (±4.39°) with respect to the body midline during lateral rotation. However, comparison between our two kinematic models demonstrated that lateral rotation of the pelvis only increases the cranio-caudal excursion of the hindlimb modestly. Thus, we propose that pelvic lateral rotation is not a stride length augmenting mechanism in K. maculata .

scholarly journals On compression and damage evolution in two thermoplastics

2017 ◽  
Vol 473 (2197) ◽  
pp. 20160495 ◽  
Author(s):  
N. K. Bourne ◽  
S. C. Garcea ◽  
D. S. Eastwood ◽  
S. Parry ◽  
C. Rau ◽  
...  
Keyword(s):  
High Speed ◽  
Deformation Behaviour ◽  
Three Dimensional ◽  
Spatial And Temporal Variation ◽  
High Speed Photography ◽  
Radial Deformation ◽  
X Ray Imaging ◽  
Series Of Experiments ◽  
The Impact ◽  
Continuous Range

The well-known Taylor cylinder impact test, which follows the impact of a flat-ended cylindrical rod onto a rigid stationary anvil, is conducted over a range of impact speeds for two polymers, polytetrafluoroethylene (PTFE) and polyetheretherketone (PEEK). In previous work, experiments and a model were developed to capture the deformation behaviour of the cylinder after impact. These works showed a region in which spatial and temporal variation of both longitudinal and radial deformation provided evidence of changes in phase within the material. In this further series of experiments, this region is imaged in a range of impacted targets at the Diamond synchrotron. Further techniques were fielded to resolve compressed regions within the recovered polymer cylinders that showed a fracture zone in the impact region. The combination of macroscopic high-speed photography and three-dimensional X-ray imaging has identified the development of failure with these polymers and shown that there is no abrupt transition in behaviours but rather a continuous range of responses to competing operating mechanisms. The behaviours noted in PEEK in these polymers show critical gaps in understanding of polymer high strain-rate response.

A Biomechanical Comparison of the Multisegment and Single Unit Topspin Forehand Drives in Tennis

1989 ◽  
Vol 5 (3) ◽  
pp. 350-364 ◽  
Author(s):  
Bruce Elliott ◽  
Tony Marsh ◽  
Peter Overheu
Keyword(s):  
Single Unit ◽  
High Speed ◽  
High Performance ◽  
Wrist Joint ◽  
Three Dimensional ◽  
Elbow Flexion ◽  
Unit Group ◽  
Transformation Method ◽  
Mean Value ◽  
High Speed Photography

Three-dimensional (3-D) high-speed photography was used to compare different forehand techniques of high performance players. Subjects, who hit a topspin forehand drive with the hitting limb moving almost as a single unit (Gs: single-unit group), were compared with players whose individual segments of the upper limb moved relative to each other (Gm: multisegment group) when playing the same stroke. The Direct Linear Transformation method was used for 3-D space reconstruction from 2-D images recorded from laterally placed phase-locked cameras operating at 200 fps. A third Photosonics camera operating at 100 fps filmed from overhead. Significant differences between the groups were recorded at the shoulder and elbow joints at the completion of the backswing. Maximal elbow joint angular velocities occurred 0.06 sec prior to impact, with the Gm group recording a significantly higher mean value for elbow extension than the Gs group. At impact, however, the Gm group recorded a significantly higher level of elbow flexion than the Gs group and achieved a higher mean angular velocity at the wrist joint than the Gs group. The Gm group recorded a higher racket tip linear velocity at impact and higher postimpact ball velocity when compared to the Gs group. The Gm technique of racket movement produced higher racket and ball velocities for this group of high performance players.

Sign in / Sign up

Export Citation Format

Share Document