scholarly journals High-performance suction feeding in an early elasmobranch

2019 ◽  
Vol 5 (9) ◽  
pp. eaax2742 ◽  
Author(s):  
Michael I. Coates ◽  
Kristen Tietjen ◽  
Aaron M. Olsen ◽  
John A. Finarelli
Keyword(s):  
Physical Modeling ◽  
High Performance ◽  
Three Dimensional ◽  
Motion Simulation ◽  
Feeding Apparatus ◽  
Suction Feeding ◽  
Middle Mississippian ◽  
Evolutionary Success ◽  
Early Radiation ◽  
Devonian Extinction

High-performance suction feeding is often presented as a classic innovation of ray-finned fishes, likely contributing to their remarkable evolutionary success, whereas sharks, with seemingly less sophisticated jaws, are generally portrayed as morphologically conservative throughout their history. Here, using a combination of computational modeling, physical modeling, and quantitative three-dimensional motion simulation, we analyze the cranial skeleton of one of the earliest known stem elasmobranchs, Tristychius arcuatus from the Middle Mississippian of Scotland. The feeding apparatus is revealed as highly derived, capable of substantial oral expansion, and with clear potential for high-performance suction feeding some 50 million years before the earliest osteichthyan equivalent. This exceptional jaw performance is not apparent from standard measures of ecomorphospace using two-dimensional data. Tristychius signals the emergence of entirely new chondrichthyan ecomorphologies in the aftermath of the end-Devonian extinction and highlights sharks as significant innovators in the early radiation of the modern vertebrate biota.

scholarly journals Biomechanics and hydrodynamics of prey capture in the Chinese giant salamander reveal a high-performance jaw-powered suction feeding mechanism

2013 ◽  
Vol 10 (82) ◽  
pp. 20121028 ◽  
Author(s):  
Egon Heiss ◽  
Nikolay Natchev ◽  
Michaela Gumpenberger ◽  
Anton Weissenbacher ◽  
Sam Van Wassenbergh
Keyword(s):  
High Speed ◽  
High Performance ◽  
Prey Capture ◽  
Three Dimensional ◽  
Cranial Morphology ◽  
Suction Feeding ◽  
Mechanical Constraints ◽  
Terrestrial Life ◽  
Chinese Giant Salamander ◽  
Dynamics Simulations

During the evolutionary transition from fish to tetrapods, a shift from uni- to bidirectional suction feeding systems followed a reduction in the gill apparatus. Such a shift can still be observed during metamorphosis of salamanders, although many adult salamanders retain their aquatic lifestyle and feed by high-performance suction. Unfortunately, little is known about the interplay between jaws and hyobranchial motions to generate bidirectional suction flows. Here, we study the cranial morphology, as well as kinematic and hydrodynamic aspects related to prey capture in the Chinese giant salamander ( Andrias davidianus ). Compared with fish and previously studied amphibians, A. davidianus uses an alternative suction mechanism that mainly relies on accelerating water by separating the ‘plates’ formed by the long and broad upper and lower jaw surfaces. Computational fluid dynamics simulations, based on three-dimensional morphology and kinematical data from high-speed videos, indicate that the viscerocranial elements mainly serve to accommodate the water that was given a sufficient anterior-to-posterior impulse beforehand by powerful jaw separation. We hypothesize that this modified way of generating suction is primitive for salamanders, and that this behaviour could have played an important role in the evolution of terrestrial life in vertebrates by releasing mechanical constraints on the hyobranchial system.

Improved 3-D reconstruction using stereo computer graphics and multiple tilt EM images

1995 ◽  
Vol 53 ◽  
pp. 630-631
Author(s):  
Lee D. Peachey ◽  
Lou Fodor ◽  
John C. Haselgrove ◽  
Stanley M. Dunn ◽  
Junqing Huang
Keyword(s):  
Computer Graphics ◽  
High Performance ◽  
Transverse Section ◽  
Three Dimensional ◽  
Stereo Pair ◽  
3D Reconstructions ◽  
Video Cameras ◽  
Biological Objects ◽  
Microscope Images ◽  
High Performance Computer

Stereo pairs of electron microscope images provide valuable visual impressions of the three-dimensional nature of specimens, including biological objects. Beyond this one seeks quantitatively accurate models and measurements of the three dimensional positions and sizes of structures in the specimen. In our laboratory, we have sought to combine high resolution video cameras with high performance computer graphics systems to improve both the ease of building 3D reconstructions and the accuracy of 3D measurements, by using multiple tilt images of the same specimen tilted over a wider range of angles than can be viewed stereoscopically. Ultimately we also wish to automate the reconstruction and measurement process, and have initiated work in that direction.Figure 1 is a stereo pair of 400 kV images from a 1 micrometer thick transverse section of frog skeletal muscle stained with the Golgi stain. This stain selectively increases the density of the transverse tubular network in these muscle cells, and it is this network that we reconstruct in this example.

Rationally Designed Three-Dimensional Porous Nico 2n@C Reticular Structure for High-Performance Li-Ion Batteries

2020 ◽  
Author(s):  
Peiyao Wang ◽  
Bangchuan Zhao ◽  
Jin Bai ◽  
Kunzhen Li ◽  
Hongyang Ma ◽  
...  
Keyword(s):  
High Performance ◽  
Three Dimensional ◽  
Li Ion Batteries ◽  
Reticular Structure ◽  
Li Ion

scholarly journals Polarization-sensitive photodetectors based on three-dimensional molybdenum disulfide (MoS2) field-effect transistors

Nanophotonics ◽  
2020 ◽  
Vol 9 (16) ◽  
pp. 4719-4728
Author(s):  
Tao Deng ◽  
Shasha Li ◽  
Yuning Li ◽  
Yang Zhang ◽  
Jingye Sun ◽  
...  
Keyword(s):  
Molybdenum Disulfide ◽  
Field Effect ◽  
High Performance ◽  
Field Effect Transistors ◽  
Three Dimensional ◽  
Polarized Light ◽  
Optical Field ◽  
Two Dimensional ◽  
Polarization Ratio ◽  
Two Dimensional Materials

AbstractThe molybdenum disulfide (MoS2)-based photodetectors are facing two challenges: the insensitivity to polarized light and the low photoresponsivity. Herein, three-dimensional (3D) field-effect transistors (FETs) based on monolayer MoS2 were fabricated by applying a self–rolled-up technique. The unique microtubular structure makes 3D MoS2 FETs become polarization sensitive. Moreover, the microtubular structure not only offers a natural resonant microcavity to enhance the optical field inside but also increases the light-MoS2 interaction area, resulting in a higher photoresponsivity. Photoresponsivities as high as 23.8 and 2.9 A/W at 395 and 660 nm, respectively, and a comparable polarization ratio of 1.64 were obtained. The fabrication technique of the 3D MoS2 FET could be transferred to other two-dimensional materials, which is very promising for high-performance polarization-sensitive optical and optoelectronic applications.

Interpenetrating Gels as Conducting/Adhering Matrices Enabling High-Performance Silicon Anodes

2021 ◽  
Author(s):  
Tingting Xia ◽  
Chengfei Xu ◽  
Pengfei Dai ◽  
Xiaoyun Li ◽  
Riming Lin ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Electrode Materials ◽  
Three Dimensional ◽  
Electrochemical Energy Storage ◽  
Active Materials ◽  
Silicon Anodes ◽  
Weak Binding ◽  
Binding Forces

Three-dimensional (3D) conductive polymers are promising conductive matrices for electrode materials toward electrochemical energy storage. However, their fragile nature and weak binding forces with active materials could not guarantee long-term...

scholarly journals 3D Printing of High Viscosity Reinforced Silicone Elastomers

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2239
Author(s):  
Nicholas Rodriguez ◽  
Samantha Ruelas ◽  
Jean-Baptiste Forien ◽  
Nikola Dudukovic ◽  
Josh DeOtte ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
New Technologies ◽  
Three Dimensional ◽  
High Viscosity ◽  
Layer By Layer ◽  
Silicone Elastomers ◽  
Uv Curable ◽  
Octet Truss ◽  
Tunable Mechanical Properties

Recent advances in additive manufacturing, specifically direct ink writing (DIW) and ink-jetting, have enabled the production of elastomeric silicone parts with deterministic control over the structure, shape, and mechanical properties. These new technologies offer rapid prototyping advantages and find applications in various fields, including biomedical devices, prosthetics, metamaterials, and soft robotics. Stereolithography (SLA) is a complementary approach with the ability to print with finer features and potentially higher throughput. However, all high-performance silicone elastomers are composites of polysiloxane networks reinforced with particulate filler, and consequently, silicone resins tend to have high viscosities (gel- or paste-like), which complicates or completely inhibits the layer-by-layer recoating process central to most SLA technologies. Herein, the design and build of a digital light projection SLA printer suitable for handling high-viscosity resins is demonstrated. Further, a series of UV-curable silicone resins with thiol-ene crosslinking and reinforced by a combination of fumed silica and MQ resins are also described. The resulting silicone elastomers are shown to have tunable mechanical properties, with 100–350% elongation and ultimate tensile strength from 1 to 2.5 MPa. Three-dimensional printed features of 0.4 mm were achieved, and complexity is demonstrated by octet-truss lattices that display negative stiffness.

scholarly journals Data-Driven Intelligent 3D Surface Measurement in Smart Manufacturing: Review and Outlook

Machines ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 13
Author(s):  
Yuhang Yang ◽  
Zhiqiao Dong ◽  
Yuquan Meng ◽  
Chenhui Shao
Keyword(s):  
High Resolution ◽  
High Performance ◽  
Sampling Design ◽  
Three Dimensional ◽  
Measurement Data ◽  
Data Driven ◽  
Surface Measurement ◽  
Smart Manufacturing ◽  
Future Research ◽  
3D Surface

High-fidelity characterization and effective monitoring of spatial and spatiotemporal processes are crucial for high-performance quality control of many manufacturing processes and systems in the era of smart manufacturing. Although the recent development in measurement technologies has made it possible to acquire high-resolution three-dimensional (3D) surface measurement data, it is generally expensive and time-consuming to use such technologies in real-world production settings. Data-driven approaches that stem from statistics and machine learning can potentially enable intelligent, cost-effective surface measurement and thus allow manufacturers to use high-resolution surface data for better decision-making without introducing substantial production cost induced by data acquisition. Among these methods, spatial and spatiotemporal interpolation techniques can draw inferences about unmeasured locations on a surface using the measurement of other locations, thus decreasing the measurement cost and time. However, interpolation methods are very sensitive to the availability of measurement data, and their performances largely depend on the measurement scheme or the sampling design, i.e., how to allocate measurement efforts. As such, sampling design is considered to be another important field that enables intelligent surface measurement. This paper reviews and summarizes the state-of-the-art research in interpolation and sampling design for surface measurement in varied manufacturing applications. Research gaps and future research directions are also identified and can serve as a fundamental guideline to industrial practitioners and researchers for future studies in these areas.

Sign in / Sign up

Export Citation Format

Share Document