TRANSITIONING A REGIONAL-SCALE GEOLOGICAL MODEL TO A WORKABLE 3-DIMENSIONAL HYDROSTRATIGRAPHIC MODEL FOR LARGE-SCALE INTEGRATED GROUNDWATER – SURFACE WATER MODELLING

2020 ◽  
Author(s):  
Omar Khader ◽  
◽  
Steven K. Frey ◽  
Amanda Taylor ◽  
David R. Lapen ◽  
...  
Keyword(s):  
Surface Water ◽  
Large Scale ◽  
Regional Scale ◽  
Geological Model ◽  
3 Dimensional

Including hydrologic signatures in the calibration of a groundwater-surface water model to improve representation of artificial drain

2020 ◽  
Author(s):  
Simon Stisen ◽  
Raphael Schneider ◽  
Anker Lajer Højberg
Keyword(s):  
Surface Water ◽  
Groundwater Flow ◽  
Large Scale ◽  
Agricultural Land ◽  
Water Cycle ◽  
Regional Scale ◽  
Drainage System ◽  
Water Model ◽  
Hydrological Models ◽  
Drain Flow

<p>About half of the Danish agricultural land is artificially drained to make land arable and increase crop yield. Those artificial drains, mostly in the form on tile drains, have a significant effect on the groundwater flow patterns and the whole water cycle. Consequently, the drainage system must also be represented in hydrological models that are used to understand and simulate, for example, recharge patterns, groundwater flow paths, or the transport and retention of nutrients. However, representation of drain in regional- and large-scale hydrological models is challenging due to i) issues with scale, ii) a lack of data on the distribution of the drain network, and iii) a lack of direct observations of drain flow. This calls for more indirect methods to inform such models.</p><p>We assume that drain flow leaves a signal in certain hydrograph signatures, as it impacts the generation of streamflow. Based on a dataset of observed discharge covering all of Denmark, and simulation results from regional-scale hydrological models, we use machine learning regressors to shed light on possible correlations between hydrograph signatures and artificial drainage. Building up on this step, we run a series of calibration exercises on a hydrological model of the agriculturally dominated Norsminde catchment, Denmark (~100 km<sup>2</sup>). The model is set up in the DHI MIKE SHE software, as distributed coupled groundwater-surface water models with a grid size of 100 m. The different calibration exercises differed in the objective functions used: either we only use conventional stream flow metrics (KGE), or also include hydrograph signatures that showed sensitive towards drain flow in our regression analysis. We then evaluate the results from the different calibration exercises, in terms of how well the model reproduces directly observed drain flow, and spatial drainage patterns.</p><p>Despite including hydrologic signatures in the calibration process, the representation of drain flow in large-scale models remains challenging. Eventually, the insight gained from this and similar studies will be incorporated in the National Water Resources Model for Denmark, to help improving national targeted regulation of nitrate application through fertilizers.</p>

Managing the impacts of mining on Ghana’s water resources from a legal perspective

2018 ◽  
Vol 1 (3) ◽  
pp. 156-165 ◽  
Author(s):  
Nasirudeen Abdul Fatawu
Keyword(s):  
Surface Water ◽  
Water Resources ◽  
Environmental Protection Agency ◽  
Large Scale ◽  
Small Scale ◽  
Mining Activities ◽  
Protection Agency ◽  
Environmental Laws ◽  
Mining Areas ◽  
Legal Perspective

Recent floods in Ghana are largely blamed on mining activities. Not only are lives lost through these floods, farms andproperties are destroyed as a result. Water resources are diverted, polluted and impounded upon by both large-scale minersand small-scale miners. Although these activities are largely blamed on behavioural attitudes that need to be changed, thereare legal dimensions that should be addressed as well. Coincidentally, a great proportion of the water resources of Ghana arewithin these mining areas thus the continual pollution of these surface water sources is a serious threat to the environmentand the development of the country as a whole. The environmental laws need to be oriented properly with adequate sanctionsto tackle the impacts mining has on water resources. The Environmental Impact Assessment (EIA) procedure needs to bestreamlined and undertaken by the Environmental Protection Agency (EPA) and not the company itself.

scholarly journals Classification of Recreation Opportunity Spectrum Using Night Lights for Evidence of Humans and POI Data for Social Setting

2021 ◽  
Vol 13 (14) ◽  
pp. 7782
Author(s):  
Wenjing Zeng ◽  
Yongde Zhong ◽  
Dali Li ◽  
Jinyang Deng
Keyword(s):  
Large Scale ◽  
Regional Scale ◽  
Hunan Province ◽  
Social Settings ◽  
Recreation Opportunity Spectrum ◽  
City District ◽  
Night Lights ◽  
Recreational Resources ◽  
Metropolitan Counties ◽  
Land Types

The recreation opportunity spectrum (ROS) has been widely recognized as an effective tool for the inventory and planning of outdoor recreational resources. However, its applications have been primarily focused on forest-dominated settings with few studies being conducted on all land types at a regional scale. The creation of a ROS is based on physical, social, and managerial settings, with the physical setting being measured by three criteria: remoteness, size, and evidence of humans. One challenge to extending the ROS to all land types on a large scale is the difficulty of quantifying the evidence of humans and social settings. Thus, this study, for the first time, developed an innovative approach that used night lights as a proxy for evidence of humans and points of interest (POI) for social settings to generate an automatic ROS for Hunan Province using Geographic Information System (GIS) spatial analysis. The whole province was classified as primitive (2.51%), semi-primitive non-motorized (21.33%), semi-primitive motorized (38.60%), semi-developed natural (30.99%), developed natural (5.61%), and highly developed (0.96%), which was further divided into three subclasses: large-natural (0.63%), small natural (0.27%), and facilities (0.06%). In order to implement the management and utilization of natural recreational resources in Hunan Province at the county (city, district) level, the province’s 122 counties (cities, districts) were categorized into five levels based on the ROS factor dominance calculated at the county and provincial levels. These five levels include key natural recreational counties (cities, districts), general natural recreational counties (cities, districts), rural counties (cities, districts), general metropolitan counties (cities, districts), and key metropolitan counties (cities, districts), with the corresponding numbers being 8, 21, 50, 24, and 19, respectively.

scholarly journals A High-Speed, Light-Weight Scalar Magnetometer Bird for km Scale UAV Magnetic Surveying: On Sensor Choice, Bird Design, and Quality of Output Data

2021 ◽  
Vol 13 (4) ◽  
pp. 649
Author(s):  
Arne Døssing ◽  
Eduardo Lima Simoes da Silva ◽  
Guillaume Martelet ◽  
Thorkild Maack Rasmussen ◽  
Eric Gloaguen ◽  
...  
Keyword(s):  
High Speed ◽  
Large Scale ◽  
Signal To Noise Ratio ◽  
Regional Scale ◽  
Weather Conditions ◽  
Light Weight ◽  
Output Data ◽  
Efficient Manner ◽  
Flexible System ◽  
Scalar Data

Magnetic surveying is a widely used and cost-efficient remote sensing method for the detection of subsurface structures at all scales. Traditionally, magnetic surveying has been conducted as ground or airborne surveys, which are cheap and provide large-scale consistent data coverage, respectively. However, ground surveys are often incomplete and slow, whereas airborne surveys suffer from being inflexible, expensive and characterized by a reduced signal-to-noise ratio, due to increased sensor-to-source distance. With the rise of reliable and affordable survey-grade Unmanned Aerial Vehicles (UAVs), and the developments of light-weight magnetometers, the shortcomings of traditional magnetic surveying systems may be bypassed by a carefully designed UAV-borne magnetometer system. Here, we present a study on the development and testing of a light-weight scalar field UAV-integrated magnetometer bird system (the CMAGTRES-S100). The idea behind the CMAGTRES-S100 is the need for a high-speed and flexible system that is easily transported in the field without a car, deployable in most terrain and weather conditions, and provides high-quality scalar data in an operationally efficient manner and at ranges comparable to sub-regional scale helicopter-borne magnetic surveys. We discuss various steps in the development, including (i) choice of sensor based on sensor specifications and sensor stability tests, (ii) design considerations of the bird, (iii) operational efficiency and flexibility and (iv) output data quality. The current CMAGTRES-S100 system weighs ∼5.9 kg (including the UAV) and has an optimal surveying speed of 50 km/h. The system was tested along a complex coastal setting in Brittany, France, targeting mafic dykes and fault contacts with magnetite infill and magnetite nuggets (skarns). A 2.0 × 0.3 km area was mapped with a 10 m line-spacing by four sub-surveys (due to regulatory restrictions). The sub-surveys were completed in 3.5 h, including >2 h for remobilisation and the safety clearance of the area. A noise-level of ±0.02 nT was obtained and several of the key geological structures were mapped by the system.

Lineaments Revisited

SEG Discovery ◽  
2000 ◽  
pp. 1-20
Author(s):  
JEREMY P. RICHARDS
Keyword(s):  
Large Scale ◽  
Mineral Exploration ◽  
Porphyry Copper ◽  
Regional Scale ◽  
Tectonic Events ◽  
Magma Reservoirs ◽  
Magma Supply ◽  
Magmatic History ◽  
Lithospheric Stress ◽  
Crustal Magma

ABSTRACT Large-scale crustal lineaments are recognized as corridors (up to 30 km wide) of aligned geological, structural, geomorphological, or geophysical features that are distinct from regional geological trends such as outcrop traces. They are commonly difficult to observe on the ground, the scale of the features and their interrelationships being too large to map except at a regional scale. They are therefore most easily identified from satellite imagery and geophysical (gravity, magnetic) maps. Lineaments are believed to be the surface expressions of ancient, deep-crustal or trans-lithospheric structures, which periodically have been reactivated as planes of weakness during subsequent tectonic events. These planes of weakness, and in particular their intersections, may provide high-permeability channels for ascent of deeply derived magmas and fluids. Optimum conditions for magma penetration are provided when these structures are placed under tension or transtension. In regions of subduction-related magmatism, porphyry copper and related deposits may be generated along these lineaments because the structures serve to focus the ascent of relatively evolved magmas and fluid distillates from deep-crustal magma reservoirs. However, lineament intersections can only focus such activity where a magma supply exists, and when lithospheric stress conditions permit. A comprehensive understanding of regional tectono-magmatic history is therefore required to interpret lineament maps in terms of their prospectivity for mineral exploration.

scholarly journals Remote sensing of <i>Trichodesmium</i> spp. mats in the western tropical South Pacific

2018 ◽  
Vol 15 (16) ◽  
pp. 5203-5219 ◽  
Author(s):  
Guillaume Rousset ◽  
Florian De Boissieu ◽  
Christophe E. Menkes ◽  
Jérôme Lefèvre ◽  
Robert Frouin ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Large Scale ◽  
New Caledonia ◽  
Hot Spot ◽  
Regional Scale ◽  
Atmospheric Correction ◽  
South Pacific ◽  
Aggregation Processes ◽  
Modis Imagery ◽  
Generate Surface

Abstract. Trichodesmium is the major nitrogen-fixing species in the western tropical South Pacific (WTSP) region, a hot spot of diazotrophy. Due to the paucity of in situ observations, remote-sensing methods for detecting Trichodesmium presence on a large scale have been investigated to assess the regional-to-global impact of this organism on primary production and carbon cycling. A number of algorithms have been developed to identify Trichodesmium surface blooms from space, but determining with confidence their accuracy has been difficult, chiefly because of the scarcity of sea-truth information at the time of satellite overpass. Here, we use a series of new cruises as well as airborne surveys over the WTSP to evaluate their ability to detect Trichodesmium surface blooms in the satellite imagery. The evaluation, performed on MODIS data at 250 m and 1 km resolution acquired over the region, shows limitations due to spatial resolution, clouds, and atmospheric correction. A new satellite-based algorithm is designed to alleviate some of these limitations, by exploiting optimally spectral features in the atmospherically corrected reflectance at 531, 645, 678, 748, and 869 nm. This algorithm outperforms former ones near clouds, limiting false positive detection and allowing regional-scale automation. Compared with observations, 80 % of the detected mats are within a 2 km range, demonstrating the good statistical skill of the new algorithm. Application to MODIS imagery acquired during the February-March 2015 OUTPACE campaign reveals the presence of surface blooms northwest and east of New Caledonia and near 20∘ S–172∘ W in qualitative agreement with measured nitrogen fixation rates. Improving Trichodesmium detection requires measuring ocean color at higher spectral and spatial (<250 m) resolution than MODIS, taking into account environment properties (e.g., wind, sea surface temperature), fluorescence, and spatial structure of filaments, and a better understanding of Trichodesmium dynamics, including aggregation processes to generate surface mats. Such sub-mesoscale aggregation processes for Trichodesmium are yet to be understood.

scholarly journals Application of global models and satellite data for smaller-scale groundwater recharge studies

2016 ◽  
Author(s):  
Rogier Westerhoff ◽  
Paul White ◽  
Zara Rawlinson
Keyword(s):  
New Zealand ◽  
Satellite Data ◽  
Input Data ◽  
Large Scale ◽  
Regional Scale ◽  
Global Scale ◽  
Global Models ◽  
Scale Models ◽  
Boundary Issues ◽  
Rainfall Recharge

Abstract. Large-scale models and satellite data are increasingly used to characterise groundwater and its recharge at the global scale. Although these models have the potential to fill in data gaps and solve trans-boundary issues, they are often neglected in smaller-scale studies, since data are often coarse or uncertain. Large-scale models and satellite data could play a more important role in smaller-scale (i.e., national or regional) studies, if they could be adjusted to fit that scale. In New Zealand, large-scale models and satellite data are not used for groundwater recharge estimation at the national scale, since regional councils (i.e., the water managers) have varying water policy and models are calibrated at the local scale. Also, some regions have many localised ground observations (but poor record coverage), whereas others are data-sparse. Therefore, estimation of recharge is inconsistent at the national scale. This paper presents an approach to apply large-scale, global, models and satellite data to estimate rainfall recharge at the national to regional scale across New Zealand. We present a model, NGRM, that is largely inspired by the global-scale WaterGAP recharge model, but is improved and adjusted using national data. The NGRM model uses MODIS-derived ET and vegetation satellite data, and the available nation-wide datasets on rainfall, elevation, soil and geology. A valuable addition to the recharge estimation is the model uncertainty estimate, based on variance, covariance and sensitivity of all input data components in the model environment. This research shows that, with minor model adjustments and use of improved input data, large-scale models and satellite data can be used to derive rainfall recharge estimates, including their uncertainty, at the smaller scale, i.e., national and regional scale of New Zealand. The estimated New Zealand recharge of the NGRM model compare well to most local and regional lysimeter data and recharge models. The NGRM is therefore assumed to be capable to fill in gaps in data-sparse areas and to create more consistency between datasets from different regions, i.e., to solve trans-boundary issues. This research also shows that smaller-scale recharge studies in New Zealand should include larger boundaries than only a (sub-)aquifer, and preferably the whole catchment. This research points out the need for improved collaboration on the international to national to regional levels to further merge large-scale (global) models to smaller (i.e., national or regional) scales. Future research topics should, collaboratively, focus on: improvement of rainfall-runoff and snowmelt methods; inclusion of river recharge; further improvement of input data (rainfall, evapotranspiration, soil and geology); and the impact of recharge uncertainty in mountainous and irrigated areas.

scholarly journals Present and LGM permafrost from climate simulations: contribution of statistical downscaling

2010 ◽  
Vol 4 (4) ◽  
pp. 2233-2275 ◽  
Author(s):  
G. Levavasseur ◽  
M. Vrac ◽  
D. M. Roche ◽  
D. Paillard ◽  
A. Martin ◽  
...  
Keyword(s):  
Statistical Downscaling ◽  
Large Scale ◽  
Climate Models ◽  
Multinomial Logistic Regression ◽  
Generalized Additive Models ◽  
Regional Scale ◽  
Surface Air Temperature ◽  
Additive Models ◽  
Simple Relationship ◽  
Time Period

Abstract. We quantify the agreement between permafrost distributions from PMIP2 (Paleoclimate Modeling Intercomparison Project) climate models and permafrost data. We evaluate the ability of several climate models to represent permafrost and assess the inter-variability between them. Studying an heterogeneous variable such as permafrost implies to conduct analysis at a smaller spatial scale compared with climate models resolution. Our approach consists in applying statistical downscaling methods (SDMs) on large- or regional-scale atmospheric variables provided by climate models, leading to local permafrost modelling. Among the SDMs, we first choose a transfer function approach based on Generalized Additive Models (GAMs) to produce high-resolution climatology of surface air temperature (SAT). Then, we define permafrost distribution over Eurasia by SAT conditions. In a first validation step on present climate (CTRL period), GAM shows some limitations with non-systemic improvements in comparison with the large-scale fields. So, we develop an alternative method of statistical downscaling based on a stochastic generator approach through a Multinomial Logistic Regression (MLR), which directly models the probabilities of local permafrost indices. The obtained permafrost distributions appear in a better agreement with data. In both cases, the provided local information reduces the inter-variability between climate models. Nevertheless, this also proves that a simple relationship between permafrost and the SAT only is not always sufficient to represent local permafrost. Finally, we apply each method on a very different climate, the Last Glacial Maximum (LGM) time period, in order to quantify the ability of climate models to represent LGM permafrost. Our SDMs do not significantly improve permafrost distribution and do not reduce the inter-variability between climate models, at this period. We show that LGM permafrost distribution from climate models strongly depends on large-scale SAT. The differences with LGM data, larger than in the CTRL period, reduce the contribution of downscaling and depend on several factors deserving further studies.

Sign in / Sign up

Export Citation Format

Share Document