Paleoenvironmental analysis of the late Neoproterozoic Mistaken Point and Trepassey formations, southeastern Newfoundland

2003 ◽  
Vol 40 (10) ◽  
pp. 1375-1391 ◽  
Author(s):  
Donald A Wood ◽  
Robert W Dalrymple ◽  
Guy M Narbonne ◽  
James G Gehling ◽  
Matthew E Clapham
Keyword(s):  
Deep Water ◽  
Ash Deposition ◽  
Sea Floor ◽  
Fine Grained ◽  
Basin Floor ◽  
Downslope Flow ◽  
Late Neoproterozoic ◽  
Volcanogenic Deposits ◽  
Low Dispersion ◽  
Paleoenvironmental Analysis

The Mistaken Point and Trepassey formations (Conception and St. John's groups, respectively) comprise a terminal Neoproterozoic, deep-marine succession of fine-grained turbidites and volcanogenic deposits that are part of the Avalonian Terrane. Debris-flow beds, slumped units, the low dispersion of turbidity-current paleoflow directions, and the absence of wave-generated structures together indicate that the sediment was deposited on a deep-water, southeast- facing slope. Channels were not present in the study area. The upward increase in the abundance of slump structures suggests that these units represent toe-of-slope and mid-slope environments, respectively. These units prograded over basin-floor deposits of the Drook and Briscal formations, which have (axial) paleocurrent directions that are orthogonal to the inferred downslope flow that characterized the overlying deposits. Within the Mistaken Point and Trepassey formations, a diverse assemblage of soft-bodied, non-phototrophic Ediacaran organisms is preserved beneath volcanic ash layers on more than one hundred surfaces. Individual fossiliferous surfaces can be correlated up to several kilometres. The felling orientations of frondose fossils indicate that contour currents, as well as up- and downslope currents of tidal and (or) wind-forced origin, influenced the sea floor in the intervals between event beds when the organisms lived. The contour currents may have been responsible for sustaining the organisms in this deep-water setting. The current-produced inclination of the frondose organisms at the time of ash deposition allowed their preservation by preventing the accumulation of ash beneath them.

Influence of mass transport deposit (MTD) surface topography on deep-water deposition: an example from a predominantly fine-grained continental margin, New Zealand

2020 ◽  
Vol 500 (1) ◽  
pp. 147-171 ◽  
Author(s):  
Suzanne Bull ◽  
Greg H. Browne ◽  
Malcolm J. Arnot ◽  
Lorna J. Strachan
Keyword(s):  
New Zealand ◽  
Mass Transport ◽  
Surface Topography ◽  
Deep Water ◽  
Three Dimensional ◽  
Sediment Supply ◽  
Fine Grained ◽  
Basin Floor ◽  
Detachment Surface ◽  
Image Part

AbstractThree-dimensional (3D) seismic data reveal the complex interplay between the surface topography of a c. 4405 km3 mass transport deposit (MTD) and overlying sedimentary packages over approximately the last two million years. The data image part of the Pleistocene to recent shelf to slope to basin-floor Giant Foresets Formation in offshore western New Zealand. The MTD created substantive topographic relief and rugosity at the contemporaneous seabed, formed by the presence of a shallow basal detachment surface, and very large (up to 200 m high) intact slide blocks, respectively. Sediments were initially deflected away from high-relief MTD topography and confined in low areas. With time, the MTD was progressively healed by a series of broadly offset-stacked and increasingly unconfined packages comprised of many channel bodies and their distributary complexes. Positive topography formed by the channels and their distributary complexes further modified the seafloor and influenced the location of subsequent sediment deposition. Channel sinuosity increased over time, interpreted as the result of topographic healing and reduced seafloor gradients. The rate of sediment supply is likely to have been non-uniform, reflecting tectonic pulses across the region. Sediments were routed into deep water via slope-confined channels that originated shortly before emplacement of the MTD.

Variability of fine-grained basin floor turbidites and evaluation of controls on their development: Late Pleistocene, Gulf of Corinth, Greece

2020 ◽  
Author(s):  
Natacha Fabregas ◽  
Robert Gawthorpe ◽  
Mary Ford ◽  
Martin Muravchik ◽  
Sofia Pechlivanidou ◽  
...  
Keyword(s):  
Late Pleistocene ◽  
Deep Water ◽  
Rift Basins ◽  
Fine Grained ◽  
Sea Level Fluctuations ◽  
Sediment Routing ◽  
Gulf Of Corinth ◽  
Depositional Processes ◽  
Energy Flows ◽  
Basin Floor

<p>The Gulf of Corinth is one of the World’s fastest extending continental rift basins. During the Late Pleistocene, it alternated between marine and lacustrine conditions due to climate-driven sea-level fluctuations connecting or isolating/semi-isolating it from the open ocean. Core from IODP Expedition 381 (Corinth Active Rift Development) provide a continuous record of depositional processes operating within this deep-water rift and the interaction of tectonic and climate drivers controlling deep-water deposition over the Middle to Late Pleistocene. Subaqueous sediment density flows affect the Gulf of Corinth and are classified either by physical flow properties and grain support mechanisms or by depositional processes. Existing classifications mainly describe deposits from decimetre to 10’s of meter scale with an emphasis on sandy beds. Thinner (millimetre to centimetre scale) and finer (muddy to sandy) subaqueous sedimentary density flows beds are understudied. Low energy flows and tail of flow processes need a better understanding and are the target of this work. The aim of this study is to characterise the variability of fine-grained subaqueous sedimentary gravity flow deposits and the controls on their development based on core data from Site M0079 (IODP Expedition 381).  This site is located in the deepest part of the Gulf of Corinth (857 m water depth), in the most distal part of the sediment routing system. Analyses were performed within a 100 m interval covering Marine Isotope Stages 6 and 7 (from ~130 to ~250 ka). Detailed, sub-centimetre visual logging recorded over 2 000 beds classified according to (1) the presence/absence of a coarse base, (2) the grain-size (silty or sandy) of the base (if any), (3) the presence/absence of laminations within the muddy intervals, (4) sedimentary structures. The bed types reflect the diversity of the sedimentary processes and the subaqueous sediment density flows are thus organised within the depositional model. Bed frequency analysis provides insight into the variability between marine and lacustrine conditions. Relative chemical composition obtained from high resolution (2 mm) X-ray fluorescence scanning is used: (1) to examine the interactions between tail of the flow and background sedimentation in the basin and (2) to assess the provenance of the sediments.</p>

Lithostratigraphy of the Skoorsteenberg Formation (Ecca Group, Karoo Supergroup), South Africa

2017 ◽  
Vol 120 (3) ◽  
pp. 433-446
Author(s):  
H. de V. Wickens ◽  
D.I. Cole
Keyword(s):  
South Africa ◽  
Deep Water ◽  
Regional Distribution ◽  
Water Systems ◽  
Fine Grained ◽  
Karoo Basin ◽  
Porosity And Permeability ◽  
Basin Floor ◽  
Primary Porosity ◽  
Lower Slope

Abstract The Middle Permian Skoorsteenberg Formation is part of the Ecca Group (Karoo Supergroup) of South Africa. It is also known as the ‘Tanqua fan complex’ due to its origin as a deep-water sedimentation unit associated with a prograding deltaic system. The Skoorsteenberg Formation crops out over approximately 650 km2 along the western margin of the Main Karoo Basin. It thins out in a northerly and easterly direction and therefore has a limited extent with cut-off boundaries to the south and north. It is underlain by the Tierberg Formation and overlain by the Kookfontein Formation, the latter being limited to the regional distribution of the Skoorsteenberg Formation. The Skoorsteenberg Formation has a composite thickness of 400 m and comprises five individual sandstone packages, separated by shale units of similar thickness. The sandstones are very fine- to fine-grained, light greyish to bluish grey when fresh, poorly sorted and lack primary porosity and permeability. The Tanqua fan complex is regarded as one of the world’s best examples of an ancient basin floor to slope fan complex associated with a fluvially dominated deltaic system. It has served as analogue for many deep-water systems around the world and continues to be a most sought after “open-air laboratory” for studying the nature of fine-grained, deep-water sedimentation. The fan systems are essentially tectonically undeformed, outstandingly well exposed and contain an inexhaustible amount of information on the deep-water architecture of lower slope to basin floor turbidite deposits.

scholarly journals Mudrock Microstructure: A Technique for Distinguishing between Deep-Water Fine-Grained Sediments

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 653
Author(s):  
Shereef Bankole ◽  
Dorrik Stow ◽  
Zeinab Smillie ◽  
Jim Buckman ◽  
Helen Lever
Keyword(s):  
Grain Size ◽  
Deep Water ◽  
Sedimentary Facies ◽  
X Ray Diffraction ◽  
Weak Current ◽  
Large Area ◽  
Fine Grained ◽  
Mean Size ◽  
The Mean ◽  
Water Facies

Distinguishing among deep-water sedimentary facies has been a difficult task. This is possibly due to the process continuum in deep water, in which sediments occur in complex associations. The lack of definite sedimentological features among the different facies between hemipelagites and contourites presented a great challenge. In this study, we present detailed mudrock characteristics of the three main deep-water facies based on sedimentological characteristics, laser diffraction granulometry, high-resolution, large area scanning electron microscopy (SEM), and the synchrotron X-ray diffraction technique. Our results show that the deep-water microstructure is mainly process controlled, and that the controlling factor on their grain size is much more complex than previously envisaged. Retarding current velocity, as well as the lower carrying capacity of the current, has an impact on the mean size and sorting for the contourite and turbidite facies, whereas hemipelagite grain size is impacted by the natural heterogeneity of the system caused by bioturbation. Based on the microfabric analysis, there is a disparate pattern observed among the sedimentary facies; turbidites are generally bedding parallel due to strong currents resulting in shear flow, contourites are random to semi-random as they are impacted by a weak current, while hemipelagites are random to oblique since they are impacted by bioturbation.

scholarly journals Modelling the embedment process during offshore pipe-laying on fine-grained soils

2013 ◽  
Vol 50 (1) ◽  
pp. 15-27 ◽  
Author(s):  
Z.J. Westgate ◽  
D.J. White ◽  
M.F. Randolph
Keyword(s):  
Deep Water ◽  
Small Amplitude ◽  
Model Tests ◽  
Soil Parameters ◽  
Sea State ◽  
Field Surveys ◽  
Centrifuge Model ◽  
Fine Grained ◽  
Displacement Patterns ◽  
Centrifuge Model Tests

Subsea pipelines are becoming an increasingly significant element of offshore hydrocarbon developments as exploration moves into deep-water environments further from shore. During the lay process, pipelines are subject to small amplitude vertical and horizontal oscillations, driven by the sea state and lay vessel motions. Centrifuge model tests have been used to simulate these small-amplitude lay effects, with varying degrees of idealization relative to the real lay process. In the soft soils found in deep water, pipe embedment can exceed a diameter or more, thus significantly affecting the lateral pipe–soil interaction, axial resistance, and thermal insulation. In this paper, results from centrifuge model tests are used to calibrate a model for calculating the dynamic embedment of a subsea pipeline. The model uses elements of plasticity theory to capture the effects of combined vertical and horizontal loading, and incorporates the softening of the surrounding soil as it is remoulded due to the pipeline motions. Influences from the lay rate, lay geometry, and sea state are included in the calculation process. The model is compared with observed as-laid pipeline embedment data from field surveys at three different offshore sites. Using site-specific soil parameters obtained from in situ testing and idealized pipe loads and motions to represent the load and displacement patterns during offshore pipe-laying, respectively, the model is shown to capture well the final as-laid embedment measured in the field surveys.

scholarly journals High-frequency sea-level changes recorded in deep-water carbonates of the Upper Cretaceous Dol Formation (island of Brač, Croatia)

2010 ◽  
Vol 61 (1) ◽  
pp. 29-38
Author(s):  
Damir Bucković ◽  
Maja Martinuš ◽  
Duje Kukoč ◽  
Blanka Tešović ◽  
Ivan Gušić
Keyword(s):  
Sea Level ◽  
Deep Water ◽  
High Frequency ◽  
Upper Cretaceous ◽  
Distal Part ◽  
Preferential Orientation ◽  
Sea Level Changes ◽  
Carbonate Production ◽  
Fine Grained ◽  
Platform Margin

High-frequency sea-level changes recorded in deep-water carbonates of the Upper Cretaceous Dol Formation (island of Brač, Croatia)The upper part of the Middle Coniacian/Santonian-Middle Campanian deep-water Dol Formation of the island of Brač is composed of countless fine-grained allodapic intercalations deposited in an intraplatform trough. Within the studied section 13 beds can be distinguished, each defined by its lower part built up of dark grey limestone with abundance of branched, horizontally to subhorizontally oriented burrows, and the upper part, in which the light grey to white limestone contains larger burrows, rarely branched, showing no preferential orientation. The lower, dark grey, intensively bioturbated levels are interpreted as intervals formed during high-frequency sea-level highstands, while the upper, light grey-to-white levels are interpreted as intervals formed during the high-frequency sea-level lowstands. Cyclic alternation of these two intervals within the fine-grained allodapic beds is interpreted as the interaction between the amount of carbonate production on the platform margin and the periodicity and intensity of shedding and deposition in the distal part of toe-of-slope environment, which is governed by Milankovitch-band high frequency sea-level changes.

Ultrahigh-temperature metamorphism and decompression history of sapphirine granulites from Rajapalaiyam, southern India: implications for the formation of hot orogens during Gondwana assembly

2009 ◽  
Vol 147 (1) ◽  
pp. 42-58 ◽  
Author(s):  
T. TSUNOGAE ◽  
M. SANTOSH
Keyword(s):  
Southern India ◽  
Stability Field ◽  
Fine Grained ◽  
History Of ◽  
Peak Metamorphism ◽  
Gondwana Supercontinent ◽  
Isothermal Decompression ◽  
Ultrahigh Temperature ◽  
Late Neoproterozoic ◽  
Uht Metamorphism

AbstractSapphirine-bearing Mg–Al granulites from Rajapalaiyam in the southern part of the Madurai Block provide critical evidence for Late Neoproterozoic–Cambrian ultrahigh-temperature (UHT) metamorphism in southern India. Poikiloblastic garnet in quartzo-feldspathic and pelitic granulites contain inclusions of fine-grained subidioblastic to xenoblastic sapphirine associated with quartz, suggesting that the rocks underwent T > 1000°C peak metamorphism. Quartz inclusions in spinel within garnet are also regarded as clear evidence for a UHT condition. Inclusions of orthopyroxene within porphyroblastic garnet in the sapphirine-bearing rocks show the highest Al2O3 content of up to 10.3 wt%, suggesting T = 1050–1070°C and P = 8.5–9.5 kbar. Temperatures estimated from ternary feldspar and other geothermometers (T = 950–1000°C) further support extreme thermal metamorphism in this region. Xenoblastic spinel inclusions in sapphirine coexisting with quartz suggest that the spinel + quartz assemblage pre-dates the sapphirine + quartz assemblage, probably implying a cooling from T ~ 1050°C or an anticlockwise P–T path. The FMAS reaction sapphirine + quartz + garnet → orthopyroxene + sillimanite indicates a cooling from the sapphirine + quartz stability field after the peak metamorphism. Corona textures of orthopyroxene + cordierite (± sapphirine), orthopyroxene + sapphirine + cordierite, and cordierite + spinel around garnet suggest subsequent near-isothermal decompression followed by decompressional cooling toward T = 650–750°C and P = 4.5–5.5 kbar. The sapphirine–quartz association and related textures described in this study have an important bearing on the UHT metamorphism and exhumation history of the Madurai Block, as well as on the tectonic evolution of the continental deep crust in southern India. Our study provides a typical example for extreme metamorphism associated with collisional tectonics during the Late Neoproterozoic–Cambrian assembly of the Gondwana supercontinent.

scholarly journals Sea-floor and sea-ice conditions in the western Weddell Sea, Antarctica, around the wreck of Sir Ernest Shackleton's Endurance

2020 ◽  
Vol 32 (4) ◽  
pp. 301-313 ◽  
Author(s):  
Julian A. Dowdeswell ◽  
Christine L. Batchelor ◽  
Boris Dorschel ◽  
Toby J. Benham ◽  
Frazer D.W. Christie ◽  
...  
Keyword(s):  
Sea Ice ◽  
Autonomous Underwater Vehicles ◽  
Underwater Vehicles ◽  
Weddell Sea ◽  
Energy Conditions ◽  
Mass Wasting ◽  
Sea Floor ◽  
Fine Grained ◽  
Ice Conditions ◽  
Sedimentary System

AbstractMarine-geophysical evidence on sea-floor morphology and shallow acoustic stratigraphy are used to examine the substrate around the location at which Sir Ernest Shackleton's ship Endurance sank in 1915 and on the continental slope-shelf sedimentary system above this site in the western Weddell Sea. Few signs of turbidity-current and mass-wasting activity are found near or upslope of the wreck site, and any such activity was probably linked to full-glacial higher-energy conditions when ice last advanced across the continental shelf. The wreck is well below the maximum depth of iceberg keels and will not have been damaged by ice-keel ploughing. The wreck has probably been draped by only a few centimetres of fine-grained sediment since it sank in 1915. Severe modern sea-ice conditions hamper access to the wreck site. Accessing and investigating the wreck of Endurance in the Weddell Sea therefore represents a significant challenge. An ice-breaking research vessel is required, and even this would not guarantee that the site could be reached. Heavy sea-ice cover at the wreck site, similar to that encountered by Agulhus II during the Weddell Sea Expedition 2019, would also make the launch and recovery of autonomous underwater vehicles and remotely operated vehicles deployed to investigate the Endurance wreck problematic.

Sign in / Sign up

Export Citation Format

Share Document