Submarine fan deposystems and tectonics of a Late Cretaceous forearc basin along an accretionary convergent plate boundary, MacColl Ridge Formation, Wrangell Mountains, Alaska

1999 ◽  
Vol 36 (3) ◽  
pp. 433-458 ◽  
Author(s):  
Jeffrey M Trop ◽  
Kenneth D Ridgway ◽  
Arthur R Sweet ◽  
Paul W Layer
Keyword(s):  
Late Cretaceous ◽  
Compositional Data ◽  
Hanging Wall ◽  
Plate Boundary ◽  
Coarse Grained ◽  
Fault System ◽  
Forearc Basin ◽  
Submarine Fan ◽  
The North ◽  
South Central

Analysis of Upper Cretaceous sedimentary and volcanic strata in the Wrangell Mountains of south-central Alaska provides an opportunity to study the tectonics, depositional systems, and provenance of a forearc basin that developed along an accretionary convergent plate boundary. New data from the 1150 m thick MacColl Ridge Formation indicate that deposition occurred during the Campanian on a coarse-grained submarine fan that was derived from an uplifted allochthonous terrane exposed in the hanging wall of a fault system that separated the forearc basin from the subduction complex. New age controls include palynoflora indicative of a late middle to late Campanian age, and compatible radiometric age determinations of volcanic vitric-crystal tuffs near the top of the formation which have 40Ar/39Ar isochron ages of 79.4 ± 0.7 and 77.9 ± 2.1 Ma. Sedimentological and paleontological data show that sedimentation occurred on the inner portions of a sand- and gravel-rich submarine fan system. Evidence for this interpretation includes dominance of channelized sediment gravity flow deposits, particularly turbidites and debris flows; microflora indicative of open-marine conditions; unidirectional paleocurrent indicators; and syndepositional slump features. The pyroclastic eruptions that formed the vitric-crystal tuffs of the MacColl Ridge Formation are interpreted as products of the Late Cretaceous Kluane magmatic arc that bordered the forearc basin to the north. Sandstone and conglomerate compositional data combined with northward-directed paleocurrent indicators suggest that detritus was derived mainly from igneous rocks of the allochthonous Wrangellia terrane located in the hanging wall of the Border Ranges fault system along the southern margin of the basin. From a regional perspective, deposition of the MacColl Ridge Formation was coeval with the early part of Campanian-Maastrichtian synorogenic sedimentation and contractile deformation documented throughout the northwestern Cordillera.

scholarly journals IODP Expedition 319, NanTroSEIZE Stage 2: First IODP Riser Drilling Operations and Observatory Installation Towards Understanding Subduction Zone Seismogenesis

2010 ◽  
Vol 10 ◽  
pp. 4-13 ◽  
Author(s):  
L. McNeill ◽  
D. Saffer ◽  
T. Byrne ◽  
E. Araki ◽  
S. Toczko ◽  
...  
Keyword(s):  
Subduction Zone ◽  
Fault Zone ◽  
Hanging Wall ◽  
Plate Boundary ◽  
Fault System ◽  
Seismogenic Zone ◽  
Plate Boundaries ◽  
Forearc Basin ◽  
Drilling Operations

The Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) is a major drilling project designed to investigate fault mechanics and the seismogenic behavior of subduction zone plate boundaries. Expedition 319 is the first riser drilling operation within scientific ocean drilling. Operations included riser drilling at Site C0009 in the forearc basin above the plate boundary fault, non-riser drilling at Site C0010 across the shallow part of the megasplay fault system &ndash; which may slip during plate boundary earthquakes &ndash; and initial drilling at Site C0011 (incoming oceanic plate) for Expedition 322. At Site C0009, new methods were tested, including analysis of drill mud cuttings and gas, and <i>in situ</i> measurements of stress, pore pressure, and permeability. These results, in conjunction with earlier drilling, will provide (a) the history of forearc basin development (including links to growth of the megasplay fault system and modern prism), (b) the first <i>in situ</i> hydrological measurements of the plate boundary hanging wall, and (c) integration of <i>in situ</i> stress measurements (orientation and magnitude) across the forearc and with depth. A vertical seismic profile (VSP) experiment provides improved constraints on the deeper structure of the subduction zone. At Site C0010, logging-while-drilling measurements indicate significant changes in fault zone and hanging wall properties over short (< 5 km) along-strike distances, suggesting different burial and/or uplift history. The first borehole observatory instruments were installed at Site C0010 to monitor pressure and temperature within the megasplay fault zone, and methods of deployment of more complex observatory instruments were tested for future operations. <br><br> doi:<a href="http://dx.doi.org/10.2204/iodp.sd.10.01.2010" target="_blank">10.2204/iodp.sd.10.01.2010</a>

Palaeoenvironmental analysis of a Miocene basin in the high Taurus Mountains (southern Turkey) and its palaeogeographical and structural significance

2002 ◽  
Vol 139 (4) ◽  
pp. 473-487 ◽  
Author(s):  
F. OCAKOĞLU
Keyword(s):  
Depositional Environments ◽  
Coarse Grained ◽  
Fault System ◽  
Small Scale ◽  
The South ◽  
Taurus Mountains ◽  
The North ◽  
South Central ◽  
Southern Turkey ◽  
Basin Fill

Determination of the relationships between the southern, marine-dominated Miocene basins of south central Turkey and their continental hinterland in southern Turkey has traditionally been frustrated by the apparent absence of basin remnants within the Taurus Mountains. The Dikme basin, which seems to be an enclave of basin remnants within the Aladağ Mountains (Eastern Taurides), consists mainly of coarse-grained continental sediments of various facies. These mostly early–middle Miocene sediments were studied to determine the depositional environments and the factors controlling the basin formation and basin fill architecture, to attempt to close the information gap between the Adana Basin to the south and central Anatolian Miocene further to the north. A generally southwest-flowing axial fluvial system and interfingering coarse-grained marginal alluvial clastics derived from northwest and southeast were identified. The marginal facies to the northwest is bounded by a N 55° E-running structural lineament, that starts from the Ecemiş Fault Zone and in digital elevation models extends toward the north of the study area. Along this lineament, Miocene sediments onlap steep fault-line escarpments. Certain Miocene levels are tectonically disrupted, and an intraformational unconformity and boulder conglomerates are also well-developed in the Miocene sequence. The southeast boundary is similarly defined by a NE-trending fault that periodically elevated the adjacent Tufanbeyli autochthon, producing coarse clastics from this area. This boundary fault also induced fining-upwards vertical patterns and synsedimentary deformation in the marginal facies. Additionally, the central part of the basin exhibits a distinct fault-defined morphology characterized by small-scale (tens of metres to 150 m high) valley-and-sill topography. A thin marine interval was also encountered in the southernmost part of the basin, indicating that the clastic system originating around this area debouched into a Miocene sea situated further to the south. The proposed palaeogeography and basin fill model suggests that the Dikme basin and similar Miocene remnants, all controlled mainly by a northeast-running extensional or transtensional fault system, may have been parts of the terrestrial hinterland that supplied sediment to rapidly subsiding marine areas further south, such as the Adana Basin.

Recent and active deformation in the North Evia domain, a diffuse plate boundary between Eurasia and Aegean plates in the Western termination of the North Anatolian Fault. 

2021 ◽  
Author(s):  
Fabien Caroir ◽  
Frank Chanier ◽  
Virginie Gaullier ◽  
Julien Bailleul ◽  
Agnès Maillard-Lenoir ◽  
...  
Keyword(s):  
Fault Zone ◽  
Plate Boundary ◽  
Fault Zones ◽  
North Anatolian Fault ◽  
Fault System ◽  
Eurasian Plate ◽  
Slip Rates ◽  
The North ◽  
South West ◽  
North Aegean

&lt;p&gt;The Anatolia-Aegean microplate is currently extruding toward the South and the South-West. This extrusion is classically attributed to the southward retreat of the Aegean subduction zone together with the northward displacement of the Arabian plate. The displacement of Aegean-Anatolian block relative to Eurasia is accommodated by dextral motion along the North Anatolian Fault (NAF), with current slip rates of about 20 mm/yr. The NAF is propagating westward within the North Aegean domain where it gets separated into two main branches, one of them bordering the North Aegean Trough (NAT). This particular context is responsible for dextral and normal stress regimes between the Aegean plate and the Eurasian plate. South-West of the NAT, there is no identified major faults in the continuity of the NAF major branch and the plate boundary deformation is apparently distributed within a wide domain. This area is characterised by slip rates of 20 to 25 mm/yr relative to Eurasian plate but also by clockwise rotation of about 10&amp;#176; since ca 4 Myr. It constitutes a major extensional area involving three large rift basins: the Corinth Gulf, the Almiros Basin and the Sperchios-North Evia Gulf. The latter develops in the axis of the western termination of the NAT, and is therefore a key area to understand the present-day dynamics and the evolution of deformation within this diffuse plate boundary area.&lt;/p&gt;&lt;p&gt;Our study is mainly based on new structural data from field analysis and from very high resolution seismic reflexion profiles (Sparker 50-300 Joules) acquired during the WATER survey in July-August 2017 onboard the R/V &amp;#8220;T&amp;#233;thys II&amp;#8221;, but also on existing data on recent to active tectonics (i.e. earthquakes distribution, focal mechanisms, GPS data, etc.). The results from our new marine data emphasize the structural organisation and the evolution of the deformation within the North Evia region, SW of the NAT.&lt;/p&gt;&lt;p&gt;The combination of our structural analysis (offshore and onshore data) with available data on active/recent deformation led us to define several structural domains within the North Evia region, at the western termination of the North Anatolian Fault. The North Evia Gulf shows four main fault zones, among them the Central Basin Fault Zone (CBFZ) which is obliquely cross-cutting the rift basin and represents the continuity of the onshore Kamena Vourla - Arkitsa Fault System (KVAFS). Other major fault zones, such as the Aedipsos Politika Fault System (APFS) and the Melouna Fault Zone (MFZ) played an important role in the rift initiation but evolved recently with a left-lateral strike-slip motion. Moreover, our seismic dataset allowed to identify several faults in the Skopelos Basin including a large NW-dipping fault which affects the bathymetry and shows an important total vertical offset (&gt;300m). Finally, we propose an update of the deformation pattern in the North Evia region including two lineaments with dextral motion that extend southwestward the North Anatolian Fault system into the Oreoi Channel and the Skopelos Basin. Moreover, the North Evia Gulf domain is dominated by active N-S extension and sinistral reactivation of former large normal faults.&lt;/p&gt;

The discovery of a new sedimentary basin: offshore Raukumara, East Coast, North Island, New Zealand

2008 ◽  
Vol 48 (1) ◽  
pp. 53 ◽  
Author(s):  
Chris Uruski ◽  
Callum Kennedy ◽  
Rupert Sutherland ◽  
Vaughan Stagpoole ◽  
Stuart Henrys
Keyword(s):  
New Zealand ◽  
Oil And Gas ◽  
East Coast ◽  
Plate Boundary ◽  
Source Rocks ◽  
Fault System ◽  
Northern Coast ◽  
The South ◽  
Petroleum Potential ◽  
The North

The East Coast of North Island, New Zealand, is the site of subduction of the Pacific below the Australian plate, and, consequently, much of the basin is highly deformed. An exception is the Raukumara Sub-basin, which forms the northern end of the East Coast Basin and is relatively undeformed. It occupies a marine plain that extends to the north-northeast from the northern coast of the Raukumara Peninsula, reaching water depths of about 3,000 m, although much of the sub-basin lies within the 2,000 m isobath. The sub-basin is about 100 km across and has a roughly triangular plan, bounded by an east-west fault system in the south. It extends about 300 km to the northeast and is bounded to the east by the East Cape subduction ridge and to the west by the volcanic Kermadec Ridge. The northern seismic lines reveal a thickness of around 8 km increasing to 12–13 km in the south. Its stratigraphy consists of a fairly uniformly bedded basal section and an upper, more variable unit separated by a wedge of chaotically bedded material. In the absence of direct evidence from wells and samples, analogies are drawn with onshore geology, where older marine Cretaceous and Paleogene units are separated from a Neogene succession by an allochthonous series of thrust slices emplaced around the time of initiation of the modern plate boundary. The Raukumara Sub-basin is not easily classified. Its location is apparently that of a fore-arc basin along an ocean-to-ocean collision zone, although its sedimentary fill must have been derived chiefly from erosion of the New Zealand land mass. Its relative lack of deformation introduces questions about basin formation and petroleum potential. Although no commercial discoveries have been made in the East Coast Basin, known source rocks are of marine origin and are commonly oil prone, so there is good potential for oil as well as gas in the basin. New seismic data confirm the extent of the sub-basin and its considerable sedimentary thickness. The presence of potential trapping structures and direct hydrocarbon indicators suggest that the Raukumara Sub-basin may contain large volumes of oil and gas.

scholarly journals Propagation of a strike-slip plate boundary within an extensional environment: the westward propagation of the North Anatolian Fault

2016 ◽  
Vol 53 (11) ◽  
pp. 1416-1439 ◽  
Author(s):  
Xavier Le Pichon ◽  
A.M. Celâl Şengör ◽  
Julia Kende ◽  
Caner İmren ◽  
Pierre Henry ◽  
...  
Keyword(s):  
Plate Boundary ◽  
Strike Slip ◽  
Fault System ◽  
Plate Boundaries ◽  
Sea Of Marmara ◽  
The North ◽  
Gulf Of Corinth ◽  
Northern Border ◽  
North Aegean ◽  
Narrow Plate

We document the establishment of the Aegea–Anatolia/Eurasia plate boundary in Pliocene–Pleistocene time. Before 2 Ma, no localized plate boundary existed north of the Aegean portion of the Anatolia plate and the shear produced by the motion of Anatolia–Aegea with respect to Eurasia was distributed over the whole width of the Aegean – West Anatolian western portion. In 4.5 Ma, a shear zone comparable to the Gulf of Corinth was formed in the present Sea of Marmara. The initial extensional basins were cut by the strike-slip Main Marmara Fault system after 2.5 Ma. Shortly after, the plate boundary migrated west of the Sea of Marmara along the northern border of Aegea from the North Aegean Trough, to the Gulf of Corinth area and to the Kefalonia Fault. There, it finally linked with the northern tip of the Aegean subduction zone, completing the system of plate boundaries delimiting the Anatolia–Aegea plate. We have related the change in the distribution of shear from Miocene to Pliocene to the formation of a relatively undeforming Aegea block in Pliocene that forced the shear to be distributed over a narrow plate boundary to the north of it. We attribute the formation of this block to the northeastward progression of the oceanic Ionian slab. We propose that the slab cuts the overlying lithosphere from asthenospheric sources and induces a shortening environment over it.

scholarly journals Sevier Fault at Red Canyon

Geosites ◽  
2019 ◽  
Vol 1 ◽  
pp. 1-6
Author(s):  
Robert Biek
Keyword(s):  
Lava Flow ◽  
Fault Zone ◽  
Hanging Wall ◽  
Slip Rate ◽  
Normal Fault ◽  
Coarse Grained ◽  
Seismic Reflection Data ◽  
The North ◽  
Total Displacement ◽  
Reflection Data

The Sevier fault is spectacularly displayed on the north side of Utah Highway 12 at the entrance to Red Canyon, where it offsets a 500,000-year-old basaltic lava flow. The fault is one of several active, major faults that break apart the western margin of the Colorado Plateau in southwestern Utah. The Sevier fault is a “normal” fault, a type of fault that forms during extension of the earth’s crust, where one side of the fault moves down relative to the other side. In this case, the down-dropped side (the hanging wall) is west of the fault; the upthrown side (the footwall) lies to the east. The contrasting colors of rocks across the fault make the fault stand out in vivid detail. Immediately south of Red Canyon, the 5-million-year-old Rock Canyon lava flow, which erupted on the eastern slope of the Markagunt Plateau, flowed eastward and crossed the fault (which at the time juxtaposed non-resistant fan alluvium against coarse-grained volcaniclastic deposits) (Biek and others, 2015). The flow is now offset 775 to 1130 feet (235-345 m) along the main strand of the fault, yielding an anomalously low vertical slip rate of about 0.05 mm/yr (Lund and others, 2008). However, this eastern branch of the Sevier fault accounts for only part of the total displacement on the fault zone. A concealed, down-to-the-west fault is present west of coarse-grained volcaniclastic strata at the base of the Claron cliffs. Seismic reflection data indicate that the total displacement on the fault zone in this area is about 3000 feet (900 m) (Lundin, 1987, 1989; Davis, 1999).

scholarly journals Mid-Cenozoic succession on the northeast limb of the Mount Diablo anticline, California—A stratigraphic record of tectonic events in the forearc basin

2021 ◽  
Author(s):  
Raymond Sullivan ◽  
Morgan D. Sullivan ◽  
Stephen W. Edwards ◽  
Andrei M. Sarna-Wojcicki ◽  
Rebecca A. Hackworth ◽  
...  
Keyword(s):  
North America ◽  
Late Miocene ◽  
Plate Boundary ◽  
Leading Edge ◽  
Late Eocene ◽  
Late Cenozoic ◽  
Forearc Basin ◽  
Late Mesozoic ◽  
The North ◽  
Silicic Volcanic

ABSTRACT The mid-Cenozoic succession in the northeast limb of the Mount Diablo anticline records the evolution of plate interactions at the leading edge of the North America plate. Subduction of the Kula plate and later Farallon plate beneath the North America plate created a marine forearc basin that existed from late Mesozoic to mid-Cenozoic times. In the early Cenozoic, extension on north-south faults formed a graben depocenter on the west side of the basin. Deposition of the Markley Formation of middle to late? Eocene age took place in the late stages of the marine forearc basin. In the Oligocene, the marine forearc basin changed to a primarily nonmarine basin, and the depocenter of the basin shifted eastward of the Midland fault to a south-central location for the remainder of the Cenozoic. The causes of these changes may have included slowing in the rate of subduction, resulting in slowing subsidence, and they might also have been related to the initiation of transform motion far to the south. Two unconformities in the mid-Cenozoic succession record the changing events on the plate boundary. The first hiatus is between the Markley Formation and the overlying Kirker Formation of Oligocene age. The succession above the unconformity records the widespread appearance of nonmarine rocks and the first abundant appearance of silicic volcanic detritus due to slab rollback, which reversed the northeastward migration of the volcanic arc to a more proximal location. A second regional unconformity separates the Kirker/Valley Springs formations from the overlying Cierbo/Mehrten formations of late Miocene age. This late Miocene unconformity may reflect readjustment of stresses in the North America plate that occurred when subduction was replaced by transform motion at the plate boundary. The Cierbo and Neroly formations above the unconformity contain abundant andesitic detritus due to proto-Cascade volcanism. In the late Cenozoic, the northward-migrating triple junction produced volcanic eruptive centers in the Coast Ranges. Tephra from these local sources produced time markers in the late Cenozoic succession.

The early Paleogene stratigraphic evolution of the Huerfano Basin, Colorado

2020 ◽  
Vol 55 (1) ◽  
pp. 1-26
Author(s):  
Dirk M. Rasmussen ◽  
Brady Z. Foreman ◽  
Henry C. Fricke ◽  
Kathryn Snell ◽  
Lindsey Gipson ◽  
...  
Keyword(s):  
Carbon Isotope ◽  
Sedimentary Basins ◽  
River System ◽  
Coarse Grained ◽  
Meandering River ◽  
The North ◽  
South Central ◽  
Isotope Record ◽  
Laramide Basins ◽  
Early Paleogene

ABSTRACT Sedimentary basins throughout the North American Western Interior contain a record of Late Cretaceous through Eocene deposition related to the Laramide orogeny. The typical stratigraphic progression includes an uppermost Cretaceous fluvio-deltaic geologic formation that is unconformably overlain by an alluvial or paludal Paleocene geologic formation. The Paleocene unit is usually characterized by drab overbank facies, and overlain by an interval of amalgamated fluvial sand bodies. The overlying Eocene geologic units are characterized by red bed overbank facies. These major stratigraphic changes have been variably linked to long-wavelength dynamic subsidence, local uplift, and climatic shifts. Herein, we evaluate the depositional history of the Huerfano Basin of south-central Colorado in this overarching context. Our study presents a detailed lithofacies analysis of the Poison Canyon, Cuchara, and Huerfano Formations integrated with a new bulk (1) organic carbon isotope record, n = 299 measurements (Data Supplement 1A); and (2) magnetic record, n = 247 measurements (Data Supplement 1B). We interpret that the Paleocene Poison Canyon Formation was deposited by a braided or coarse-grained meandering river system with relatively poorly drained floodplains. The Eocene Huerfano Formation was likely deposited by a coarse-grained meandering river system with a comparatively well-drained floodplain. This pattern mirrors other Laramide basins, and is likely related to a regional drying pattern linked to long-term warming during the early Paleogene. Age of the intervening Cuchara Formation is poorly resolved, but is an anomalously thick and coarse-grained fluvial unit, with evidence for extensive reworking of floodplain deposits and a moderate coarsening-upward pattern. The Cuchara Formation is associated with magnetic trends that suggest greater oxidation and weathering, and greater variability in rainfall patterns, as well as a subtle negative shift in carbon isotope values. This pattern indicates a period of widespread progradation within the basin, potentially related to a major Laramide uplift event that affected Colorado’s Wet Mountains, Front Range, and Sangre de Cristo Mountains.

Sign in / Sign up

Export Citation Format

Share Document