HYDROGEN AT THE Si/SiO2 INTERFACE: FROM ATOMIC-SCALE CALCULATIONS TO ENGINEERING MODELS

2004 ◽  
Vol 14 (02) ◽  
pp. 575-580
Author(s):  
S. N. RASHKEEV ◽  
D. M. FLEETWOOD ◽  
R. D. SCHRIMPF ◽  
S. T. PANTELIDES

Two contrasting behaviors have been observed for H in Si / SiO 2 structures: a) Radiation experiments established that protons released in SiO 2 migrate to the Si / SiO 2 interface where they induce new defects; b) For oxides exposed first to high-temperature annealing and then to molecular hydrogen, mobile positive charge believed to be protons can be cycled to and from the interface by reversing the oxide electric field. First-principles density functional calculations identify the atomic-scale mechanisms for the two types of behavior and conditions that are necessary for each. Using the results of the atomic-scale calculations we develop a model for enhanced interface-trap formation at low dose rates due to space charge effects in the base oxides of bipolar devices. We find that the hole trapping in the oxide cannot be responsible for all the Enhanced Low-Dose-Rate Sensitivity (ELDRS) effects in SiO 2, and the contribution of protons is also essential. The dynamics of interface-trap formation are defined by the relation between the proton mobility (transport time of the protons across the oxide) and the time required for positive-charge buildup near the interface due to trapped holes. The analytically estimated and numerically calculated interface-trap densities are found to be in very good agreement with available experimental data.

2002 ◽  
Vol 49 (6) ◽  
pp. 2650-2655 ◽  
Author(s):  
S.N. Rashkeev ◽  
C.R. Cirba ◽  
D.M. Fleetwood ◽  
R.D. Schrimpf ◽  
S.C. Witczak ◽  
...  

Author(s):  
O. E. Bradfute

Electron microscopy is frequently used in preliminary diagnosis of plant virus diseases by surveying negatively stained preparations of crude extracts of leaf samples. A major limitation of this method is the time required to survey grids when the concentration of virus particles (VPs) is low. A rapid survey of grids for VPs is reported here; the method employs a low magnification, out-of-focus Search Mode similar to that used for low dose electron microscopy of radiation sensitive specimens. A higher magnification, in-focus Confirm Mode is used to photograph or confirm the detection of VPs. Setting up the Search Mode by obtaining an out-of-focus image of the specimen in diffraction (K. H. Downing and W. Chiu, private communications) and pre-aligning the image in Search Mode with the image in Confirm Mode facilitates rapid switching between Modes.


2019 ◽  
Author(s):  
Michael Fischer

<p>The silicoaluminophosphate zeotype ECR-40, which has the MEI topology, contains linkages of AlO<sub>4</sub> tetrahedra via a common oxygen atom, thereby violating the famous “Löwenstein’s rule”. Due to the proven existence of Al-O-Al linkages in this material, it constitutes an ideal model system to study the acidity and mobility of protons associated with such unusual linkages. In addition, their properties can be directly compared to those of protons associated with more common Si-O-Al linkages, which are also present in ECR-40. In this work, static density functional theory (DFT) calculations including a dispersion correction were employed to study the preferred proton sites as well as the Brønsted acidity of the framework protons, followed by DFT-based ab-initio molecular dynamics (AIMD) to investigate the proton mobility in guest-free and hydrated ECR-40. Initially, two different proton arrangements were compared, one containing both H[O6] protons associated with Al-O-Al linkages and H[O10] protons at Si-O-Al linkages, the other one containing only H[O10] protons. The former model was found to be thermodynamically favoured, as a removal of protons from the Al-O-Al linkages causes a local accumulation of negative charge. Calculations of the deprotonation energy showed a moderately higher Brønsted acidity of the H[O10] protons, at variance with previous empirical explanations, which attributed the exceptional performance of ECR-40 as acid catalyst to the presence of Al‑O‑Al linkages. The AIMD simulations (<i>T</i> = 298 K) delivered no appreciable proton mobility for guest-free ECR-40 and for low levels of hydration (one H<sub>2</sub>O per framework proton). Under saturation conditions, framework deprotonation occurred, leading to the formation of protonated water clusters in the pores. Pronounced differences between the two types of framework protons were observed: While the H[O10] protons were always removed from the Si-O-Al linkages, the Al-O-Al linkages remained mostly protonated, but deprotonation did occur to a minor extent. The observation of a degree of framework deprotonation of Al-O-Al linkages differs from the findings reported in a recent computational study of hydrated aluminosilicate zeolites with such linkages (Heard et al., <i>Chem. Sci.</i> <b>2019</b>, <i>10</i>, 5705), pointing to an influence of the overall framework composition. Further inspection of the AIMD results showed that a coordination of water molecules to framework Al atoms occurred in many cases, especially in the vicinity of the Al-O-Al linkages, sometimes resulting in a pronounced modification of the linkages through additional bridging oxygen atoms. Given the changes in the local structure, it can be expected that such modified linkages are especially prone to break upon dehydration. Thus, in addition to elucidating the deprotonation behaviour of protons associated with different types of linkages, the calculations also provide insights into possible reasons for the instability of Al-O-Al linkages, clarifying why Löwenstein’s rule is mostly obeyed in materials that are formed via a hydrothermal route.</p>


2004 ◽  
Vol 51 (6) ◽  
pp. 3172-3177 ◽  
Author(s):  
M.R. Shaneyfelt ◽  
J.R. Schwank ◽  
D.M. Fleetwood ◽  
R.L. Pease ◽  
J.A. Felix ◽  
...  

Author(s):  
Prashant Singh ◽  
Duane D. Johnson

AbstractOrder–disorder transformations hold an essential place in chemically complex high-entropy ferritic steels (HEFSs) due to their critical technological application. The chemical inhomogeneity arising from mixing of multi-principal elements of varying chemistry can drive property altering changes at the atomic scale, in particular short-range order. Using density-functional theory-based linear-response theory, we predict the effect of compositional tuning on the order–disorder transformation in ferritic steels—focusing on Cr–Ni–Al–Ti–Fe HEFSs. We show that Ti content in Cr–Ni–Al–Ti–Fe solid solutions can be tuned to modify short-range order that changes the order–disorder path from BCC-B2 (Ti atomic-fraction = 0) to BCC-B2-L21 (Ti atomic-fraction > 0) consistent with existing experiments. Our study suggests that tuning degree of SRO through compositional variation can be used as an effective means to optimize phase selection in technologically useful alloys. Graphic abstract


2017 ◽  
Vol 72 (12) ◽  
pp. 1131-1138 ◽  
Author(s):  
Mehdi Aramideh ◽  
Mahmoud Mirzaei ◽  
Ghadamali Khodarahmi ◽  
Oğuz Gülseren

AbstractCancer is one of the major problems for so many people around the world; therefore, dedicating efforts to explore efficient therapeutic methodologies is very important for researchers of life sciences. In this case, nanostructures are expected to be carriers of medicinal compounds for targeted drug design and delivery purposes. Within this work, the graphene (Gr)-functionalised derivatives of capecitabine (CAP), as a representative anticancer, have been studied based on density functional theory calculations. Two different sizes of Gr molecular models have been used for the functionalisation of CAP counterparts, CAP-Gr3 and CAP-Gr5, to explore the effects of Gr-functionalisation on the original properties of CAP. All singular and functionalised molecular models have been optimised and the molecular and atomic scale properties have been evaluated for the optimised structures. Higher formation favourability has been obtained for CAP-Gr5 in comparison with CAP-Gr3 and better structural stability has been obtained in the water-solvated system than the isolated gas-phase system for all models. The CAP-Gr5 model could play a better role of electron transferring in comparison with the CAP-Gr3 model. As a concluding remark, the molecular properties of CAP changed from singular to functionalised models whereas the atomic properties remained almost unchanged, which is expected for a carrier not to use significant perturbations to the original properties of the carried counterpart.


2019 ◽  
Vol 9 (5) ◽  
pp. 840 ◽  
Author(s):  
Redouane Khaoulaf ◽  
Puja Adhikari ◽  
Mohamed Harcharras ◽  
Khalid Brouzi ◽  
Hamid Ez-Zahraouy ◽  
...  

The electronic structure and mechanical and optical properties of five pyrophosphate crystals with very complex structures are studied by first principles density functional theory calculations. The results show the complex interplay of the minor differences in specific local structures and compositions can result in large differences in reactivity and interaction that are rare in other classes of inorganic crystals. These are discussed by dividing the pyrophosphate crystals into three structural units. H2P2O7 is the most important and dominating unit in pyrophosphates. The other two are the influential cationic group with metals and water molecules. The strongest P-O bond in P2O5 is the strongest bond for crystal cohesion, but O-H and N-H bonds also play an important part. Different type of bonding between O and H atoms such as O-H, hydrogen bonding, and bridging bonds are present. Metallic cations such as Mg, Zn, and Cu form octahedral bonding with O. The water molecule provides the unique H∙∙∙O bonds, and metallic elements can influence the structure and bonding to a certain extent. The two Cu-containing phosphates show the presence of narrow metallic bands near the valence band edge. All this complex bonding affects their physical properties, indicating that fundamental understanding remains an open question.


2019 ◽  
Vol 116 (21) ◽  
pp. 10309-10316 ◽  
Author(s):  
M. Saghayezhian ◽  
Summayya Kouser ◽  
Zhen Wang ◽  
Hangwen Guo ◽  
Rongying Jin ◽  
...  

Interfaces between transition metal oxides are known to exhibit emerging electronic and magnetic properties. Here we report intriguing magnetic phenomena for La2/3Sr1/3MnO3 films on an SrTiO3 (001) substrate (LSMO/STO), where the interface governs the macroscopic properties of the entire monolithic thin film. The interface is characterized on the atomic level utilizing scanning transmission electron microscopy and electron energy loss spectroscopy (STEM-EELS), and density functional theory (DFT) is employed to elucidate the physics. STEM-EELS reveals mixed interfacial stoichiometry, subtle lattice distortions, and oxidation-state changes. Magnetic measurements combined with DFT calculations demonstrate that a unique form of antiferromagnetic exchange coupling appears at the interface, generating a novel exchange spring-type interaction that results in a remarkable spontaneous magnetic reversal of the entire ferromagnetic film, and an inverted magnetic hysteresis, persisting above room temperature. Formal oxidation states derived from electron spectroscopy data expose the fact that interfacial oxidation states are not consistent with nominal charge counting. The present work demonstrates the necessity of atomically resolved electron microscopy and spectroscopy for interface studies. Theory demonstrates that interfacial nonstoichiometry is an essential ingredient, responsible for the observed physical properties. The DFT-calculated electrostatic potential is flat in both the LSMO and STO sides (no internal electric field) for both Sr-rich and stoichiometric interfaces, while the DFT-calculated charge density reveals no charge transfer/accumulation at the interface, indicating that oxidation-state changes do not necessarily reflect charge transfer and that the concept of polar mismatch is not applicable in metal−insulator polar−nonpolar interfaces.


Sign in / Sign up

Export Citation Format

Share Document