LASER-INDUCED THERMAL–MECHANICAL DAMAGE CHARACTERISTICS OF CLEARTRAN MULTISPECTRAL ZINC SULFIDE WITH TEMPERATURE-DEPENDENT PROPERTIES

2015 ◽  
Vol 22 (01) ◽  
pp. 1550014 ◽  
Author(s):  
YAJING PENG ◽  
YANXUE JIANG ◽  
YANQIANG YANG
Keyword(s):  
Thermal Stress ◽  
Temperature Effect ◽  
Zinc Sulfide ◽  
Laser Intensity ◽  
Equivalent Stress ◽  
Mechanical Damage ◽  
Damage Mechanism ◽  
Temperature Dependent ◽  
Principal Stresses ◽  
Damage Characteristics

Laser-induced thermal–mechanical damage characteristics of window materials are the focus problems in laser weapon and anti-radiation reinforcement technology. Thermal–mechanical effects and damage characteristics are investigated for cleartran multispectral zinc sulfide ( ZnS ) thin film window materials irradiated by continuous laser using three-dimensional (3D) thermal–mechanical model. Some temperature-dependent parameters are introduced into the model. The temporal-spatial distributions of temperature and thermal stress are exhibited. The damage mechanism is analyzed. The influences of temperature effect of material parameters and laser intensity on the development of thermal stress and the damage characteristics are examined. The results show, the von Mises equivalent stress along the thickness direction is fluctuant, which originates from the transformation of principal stresses from compressive stress to tensile stress with the increase of depth from irradiated surface. The damage originates from the thermal stress but not the melting. The thermal stress is increased and the damage is accelerated by introducing the temperature effect of parameters or the increasing laser intensity.

An Analysis of Filament Overwound Toroidal Pressure Vessels and Optimum Design of Such Structures

2002 ◽  
Vol 124 (2) ◽  
pp. 215-222 ◽  
Author(s):  
Shuguang Li ◽  
John Cook
Keyword(s):  
Optimum Design ◽  
Equivalent Stress ◽  
Mechanical Damage ◽  
Stress Rupture ◽  
Optimization Procedure ◽  
Pressure Vessels ◽  
Thickness Variation ◽  
Von Mises Equivalent Stress ◽  
Metal Liner ◽  
Von Mises

This paper is concerned with the membrane shell analysis of filament overwound toroidal pressure vessels and optimum design of such pressure vessels using the results of the analysis by means of mathematical nonlinear programming. The nature of the coupling between overwind and linear has been considered based on two extreme idealizations. In the first, the overwind is rigidly coupled with the liner, so that the two deform together in the meridional direction as the vessel dilates. In the second, the overwind is free to slide relative to the linear, but the overall elongations of the two around a meridian are identical. Optimized designs with the two idealizations show only minor differences, and it is concluded that either approximation is satisfactory for the purposes of vessel design. Aspects taken into account are the intrinsic overwind thickness variation arising from the winding process and the effects of fiber pre-tension. Pre-tension can be used not only to defer the onset of yielding, but also to achieve a favorable in-plane stress ratio which minimizes the von Mises equivalent stress in the metal liner. Aramid fibers are the most appropriate fibers to be used for the overwind in this type of application. The quantity of fiber required is determined by both its short-term strength and its long-term stress rupture characteristics. An optimization procedure for the design of such vessels, taking all these factors into account, has been established. The stress distributions in the vessels designed in this way have been examined and discussed through the examples. A design which gives due consideration of possible mechanical damage to the surface of the overwind has also been addressed.

Steady-State Thermal Stresses in Wedge-Shaped Cutting Tools

1975 ◽  
Vol 97 (3) ◽  
pp. 1060-1066
Author(s):  
P. F. Thomason
Keyword(s):  
Thermal Stress ◽  
Steady State ◽  
Metal Cutting ◽  
Thermal Stresses ◽  
Heat Conduction Problem ◽  
Equivalent Stress ◽  
Cutting Tools ◽  
Thermoelastic Stress ◽  
Plastic State ◽  
Steady State Heat

Closed form expressions for the steady-state thermal stresses in a π/2 wedge, subject to constant-temperature heat sources on the rake and flank contact segments, are obtained from a conformal mapping solution to the steady-state heat conduction problem. It is shown, following a theorem of Muskhelishvili, that the only nonzero thermal stress in the plane-strain wedge is that acting normal to the wedge plane. The thermal stress solutions are superimposed on a previously published isothermal cutting-load solution, to give the complete thermoelastic stress distribution at the wedge surfaces. The thermoelastic stresses are then used to determine the distribution of the equivalent stress, and this gives an indication of the regions on a cutting tool which are likely to be in the plastic state. The results are discussed in relation to the problems of flank wear and rakeface crater wear in metal cutting tools.

Observation and Evaluation of Scratch Damage Characteristics of Injection Molded, Rubber Toughened Poly(Methylmethacrylate)

2013 ◽  
Author(s):  
Jihun An ◽  
Byoung-Hyun Kang ◽  
Byoung-Ho Choi ◽  
Hyoung-Jun Kim
Keyword(s):  
Electron Microscopy ◽  
Injection Molding ◽  
Acrylonitrile Butadiene Styrene ◽  
Damage Mechanism ◽  
Damage Characteristics ◽  
Rubber Toughened ◽  
Rubber Particles ◽  
Injection Molded ◽  
Engineering Polymers ◽  
Scratch Tests

Poly(methylmethacrylate) (PMMA) is one of popular engineering polymers for many engineering applications such as glass substitutes, medical applications, electronic goods, optical fibers, laser disk optical media and so on. PMMA is a lightweight material with excellent optical properties and balanced mechanical properties. However, PMMA is commonly blended with various functional fillers, and rubber particles are one of them to improve the low impact toughness of unfilled PMMA comparing with other engineering polymers such as polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS) copolymer and so on. PMMA is generally used to make exterior of a commercial product, so scratch characteristics of PMMA is very important in terms of the aesthetic point of view. In this paper, rubber toughened PMMA plates are prepared by injection molding, and static and progressive scratch tests are performed. Samples are prepared by various injection molding conditions, and two orientations (machine direction and transverse direction) of the injection molded plate are considered for scratch tests. Three scratch damage mechanism stages, i.e. mar/ploughing, whitening and cutting stages, are identified by observing the scratch damages and two critical loads to define the variation of scratch damage mechanisms are recorded to evaluate the scratch resistance of rubber toughened PMMA samples. Scratch damage characteristics are examined by various microscopy techniques such as optical microscopy, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, optical profiler and so on. It is clearly observed that scratch damage characteristics of rubber toughened PMMA are changed sensitively for various test conditions due to rubber particles, so it can be known that the mold design should be carefully optimized to improve scratch characteristics of injection molded rubber toughened PMMA product.

SPH Analysis for Transient Thermal Stress of FGMs with Temperature-Dependent Properties

2015 ◽  
Vol 1096 ◽  
pp. 297-301
Author(s):  
Gui Ming Rong ◽  
Hiroyuki Kisu
Keyword(s):  
Thermal Stress ◽  
Thermal Conditions ◽  
Functionally Graded ◽  
Temperature Dependent ◽  
Graded Materials ◽  
Initial Stage ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Temperature Dependent Properties ◽  
Transient Thermal

A formulation using the deviatoric stress and the continuity equation is extended to the analysis of the dynamic response of functionally graded materials (FGMs) subjected to a thermal shock by smoothed particle hydrodynamics (SPH), in which temperature dependent properties of materials are considered. Several dynamic thermal stress problems are analyzed to investigate the fluctuation of thermal stress at the initial stage under three types of thermal conditions, with the addition of two kinds of mechanical boundary conditions.

scholarly journals Study on estimation of creep behaviour of concrete at early age considering temperature effect

2019 ◽  
Vol 289 ◽  
pp. 10010
Author(s):  
Kayo Ohashi ◽  
Jun-ichi Arai ◽  
Toshiaki Mizobuchi
Keyword(s):  
Thermal Stress ◽  
Temperature Effect ◽  
Creep Strain ◽  
Prediction Accuracy ◽  
Creep Behaviour ◽  
Test Method ◽  
Control Measures ◽  
Experimental Result ◽  
Early Age ◽  
And Control

Clarifying the creep behaviour of concrete at early age not only improves the accuracy of temperature stress analysis but also contributes to prediction accuracy and control measures in cracks caused by thermal stress. However, most past researches on creep behaviour were investigated after 28 days. Currently, it is difficult to accurately perceive the creep behaviour of concrete at an early age in the test method of creep which is generally carried out. Therefore, it is necessary to evaluate the creep behaviour of concrete at early age and to establish a convenient test method to estimate the creep behaviour. Therefore, in this study, experiments were carried out for concrete at early age within one week. As the result of the experiments, it was shown that the creep strain is proportional to the load stress of concrete at an early age and the strain of specific creep decreases as the loaded age increases. In addition, based on the experimental results, an estimation equation for creep strain at early age was proposed. Within the scope of this experimental result, it was confirmed that the estimation equation proposed in this study accurately represented the creep behaviour of concrete at early age.

A Rational Methodology for Determination of Service Life for a Delayed Coker Drum

2015 ◽  
Author(s):  
John J. Aumuller ◽  
Jie Chen ◽  
Vincent A. Carucci
Keyword(s):  
Service Life ◽  
Low Cycle Fatigue ◽  
Damage Model ◽  
Mechanical Damage ◽  
Damage Mechanism ◽  
Modern Trend ◽  
Cold Spot ◽  
Chromium Alloy ◽  
Cycle Fatigue ◽  
Service Environment

Delayed unit coker drums operate in a severe service environment that precludes long term reliability due to excessive shell bulging and cracking of shell joint and shell to skirt welds. Thermal fatigue is recognized as the leading damage mechanism and past work has provided an idealized description of the thermo-mechanical mechanism via local hot and cold spot formation to quantify a lower bound life estimate for shell weld failure. The present work extends this idealized thermo-mechanical damage model by evaluating actual field data to determine a potential upper bound life estimate. This assessment also provides insight into practical techniques for equipment operators to identify design and operational opportunities to extend the service life of coke drums for their specific service environments. A modern trend of specifying higher chromium and molybdenum alloy content for drum shell material in order to improve low cycle fatigue strength is seen to be problematic; rather, the use of lower alloy materials that are generally described as fatigue tough materials are better suited for the high strain-low cycle fatigue service environment of coke drums. Materials such as SA 204 C (C – ½ Mo) and SA 302 B (C – Mn – ½ Mo) or SA 302 C (C – Mn – ½ Mo – ½ Ni) are shown to be better candidates for construction in lieu of low chromium alloy steel materials such as SA 387 grades P11 (1¼ Cr – ½ Mo), P12 (1 Cr – ½ Mo), P22 (2¼ Cr – 1 Mo) and P21 (3 Cr – 1 Mo).

Sign in / Sign up

Export Citation Format

Share Document