Seismic Behavior of X-Shaped Drawer Bracing System (DBS) and X-Braced Frames with Heavy Central Core

2016 ◽  
Vol 10 (04) ◽  
pp. 1650004 ◽  
Author(s):  
Barash Payandehjoo ◽  
Saeid Sabouri-Ghomi ◽  
Parviz Ebadi
Keyword(s):  
Energy Absorption ◽  
Seismic Performance ◽  
Local Buckling ◽  
Absorption Capacity ◽  
Braced Frames ◽  
Concentrically Braced Frames ◽  
Energy Absorption Capacity ◽  
Braced Frame ◽  
Axial Forces ◽  
Global Buckling

In this work, seismic performance of conventional X-braced frames is enhanced by using Drawer Bracing Systems (DBS). DBS is an innovative structure, which increases ductility and energy absorption capacity of the X-braces through elimination of the harmful effects of local and global buckling and by converting the induced axial forces inside diagonal arms to flexural moments. Two half-scale specimens are tested under cyclic loading and the seismic performance of an X-shaped DBS is compared to that of an X-braced frame. Both braced frames are designed for equal nominal base shears and have similar frame sizes and dimensions. Test results confirm that converting the axial force to flexural moments in rational dissipative elements inside braces helps prevent the global and local buckling of braces in X-shaped DBS. Consequently, ductility and energy absorption capacity of the Concentrically Braced Frames (CBFs) is increased remarkably.

ENERGY ABSORPTION OF EXPANSION TUBE CONSIDERING LOCAL BUCKLING CHARACTERISTICS

2008 ◽  
Vol 22 (31n32) ◽  
pp. 5993-5999 ◽  
Author(s):  
KWANG-HYUN AHN ◽  
JIN-SUNG KIM ◽  
HOON HUH
Keyword(s):  
Energy Absorption ◽  
Local Buckling ◽  
Expansion Ratio ◽  
Absorption Capacity ◽  
Buckling Load ◽  
Expansion Tube ◽  
Absorbed Energy ◽  
Energy Absorption Capacity ◽  
Element Analysis ◽  
Numerical Result

This paper deals with the crash energy absorption and the local buckling characteristics of the expansion tube during the tube expanding processes. In order to improve energy absorption capacity of expansion tubes, local buckling characteristics of an expansion tube must be considered. The local buckling load and the absorbed energy during the expanding process were calculated for various types of tubes and punch shapes with finite element analysis. The energy absorption capacity of the expansion tube is influenced by the tube and the punch shape. The material properties of tubes are also important parameter for energy absorption. During the expanding process, local buckling occurs in some cases, which causes significant decreasing the absorbed energy of the expansion tube. Therefore, it is important to predict the local buckling load accurately to improve the energy absorption capacity of the expansion tube. Local buckling takes place relatively easily at the large punch angle and expansion ratio. Local buckling load is also influenced by both the tube radius and the thickness. In prediction of the local buckling load, modified Plantema equation was used for strain hardening and strain rate hardening. The modified Plantema equation shows a good agreement with the numerical result.

Cyclic Loading of Externally Reinforced Masonry Walls Confined by Frames

1975 ◽  
Vol 2 (4) ◽  
pp. 489-493 ◽  
Author(s):  
W. K. Tso ◽  
A. Rutenberg ◽  
A. C. Heidebrecht
Keyword(s):  
Cyclic Loading ◽  
Energy Absorption ◽  
Axial Stress ◽  
Concrete Block ◽  
Absorption Capacity ◽  
Steel Reinforcement ◽  
Stiffness Degradation ◽  
Energy Absorption Capacity ◽  
Axial Forces ◽  
Reinforced Masonry

Experimental results are presented on three externally reinforced concrete block walls subjected to in-plane cyclic lateral loading, the walls being confined by flexible steel frames. All three specimens were of similar construction, the varying parameter being the steel reinforcement ratio in the outer skins. The load deflection curves, stiffness degradation characteristics, energy absorption capacity, as well as axial stress in the confining frame columns, are discussed. The externally reinforced walls held their integrity even under a large number of cycles of reversed load. In this respect, externally reinforced masonry behaves under cyclic loading at least as well as internally reinforced masonry. It is concluded that changes in steel reinforcement ratios do not materially affect the failure load although this ratio may have an important effect on the stiffness degradation and the energy absorption capacity of the assembly. The evaluation of the axial forces in the columns on the basis of the truss analogy appears to be substantiated by the test results.

Numerical and experimental investigation for enhancing the energy absorption capacity of the novel three-dimensional printed sandwich structures

2021 ◽  
pp. 146442072199749
Author(s):  
H Geramizadeh ◽  
S Dariushi ◽  
S Jedari Salami
Keyword(s):  
Energy Absorption ◽  
Sandwich Structures ◽  
Three Dimensional ◽  
Absorption Capacity ◽  
The Novel ◽  
Energy Absorption Capacity ◽  
Fused Deposition ◽  
Honeycomb Sandwich ◽  
Out Of Plane ◽  
Vertical Walls

The current study focuses on designing the optimal three-dimensional printed sandwich structures. The main goal is to improve the energy absorption capacity of the out-of-plane honeycomb sandwich beam. The novel Beta VI and Alpha VI were designed in order to achieve this aim. In the Beta VI, the connecting curves (splines) were used instead of the four diagonal walls, while the two vertical walls remained unchanged. The Alpha VI is a step forward on the Beta VI, which was promoted by filleting all angles among the vertical walls, created arcs, and face sheets. The two offered sandwich structures have not hitherto been provided in the literature. All models were designed and simulated by the CATIA and ABAQUS, respectively. The three-dimensional printer fabricated the samples by fused deposition modeling technique. The material properties were determined under tensile, compression, and three-point bending tests. The results are carried out by two methods based on experimental tests and finite element analyses that confirmed each other. The achievements provide novel insights into the determination of the adequate number of unit cells and demonstrate the energy absorption capacity of the Beta VI and Alpha VI are 23.7% and 53.9%, respectively, higher than the out-of-plane honeycomb sandwich structures.

Seismic evaluation of single-storey steel buildings

1999 ◽  
Vol 26 (4) ◽  
pp. 379-394 ◽  
Author(s):  
M S Medhekar ◽  
DJL Kennedy
Keyword(s):  
Seismic Performance ◽  
Response Spectrum ◽  
Time History ◽  
Analytical Models ◽  
Steel Buildings ◽  
Concentrically Braced Frames ◽  
Braced Frame ◽  
Seismic Zones ◽  
Concentrically Braced Frame ◽  
Concentrically Braced

The seismic performance of single-storey steel buildings, with concentrically braced frames and a roof diaphragm that acts structurally, is evaluated. The buildings are designed in accordance with the National Building Code of Canada 1995 and CSA Standard S16.1-94 for five seismic zones in western Canada with seismicities ranging from low to high. Only frames designed with a force modification factor of 1.5 are considered. Analytical models of the building are developed, which consider the nonlinear seismic behaviour of the concentrically braced frame, the strength and stiffness contributions of the cladding, and the flexibility, strength, and distributed mass of the roof diaphragm. The seismic response of the models is assessed by means of a linear static analysis, a response spectrum analysis, a nonlinear static or "pushover" analysis, and nonlinear dynamic time history analyses. The results indicate that current design procedures provide a reasonable estimate of the drift and brace ductility demand, but do not ensure that yielding is restricted to the braces. Moreover, in moderate and high seismic zones, the roof diaphragm responds inelastically and brace connections are overloaded. Recommendations are made to improve the seismic performance of such buildings.Key words: analyses, concentrically braced frame, dynamic, earthquake, flexible diaphragm, low-rise, nonlinear, seismic design, steel.

scholarly journals Dynamic crushing behavior of closed-cell aluminum foams based on different space-filling unit cells

2021 ◽  
Vol 21 (3) ◽  
Author(s):  
S. Talebi ◽  
R. Hedayati ◽  
M. Sadighi
Keyword(s):  
Surface Area ◽  
Dynamic Behavior ◽  
Energy Absorption ◽  
Peak Stress ◽  
Absorption Capacity ◽  
Unit Cell ◽  
Lattice Structures ◽  
Energy Absorption Capacity ◽  
Closed Cell ◽  
Unit Cells

AbstractClosed-cell metal foams are cellular solids that show unique properties such as high strength to weight ratio, high energy absorption capacity, and low thermal conductivity. Due to being computation and cost effective, modeling the behavior of closed-cell foams using regular unit cells has attracted a lot of attention in this regard. Recent developments in additive manufacturing techniques which have made the production of rationally designed porous structures feasible has also contributed to recent increasing interest in studying the mechanical behavior of regular lattice structures. In this study, five different topologies namely Kelvin, Weaire–Phelan, rhombicuboctahedron, octahedral, and truncated cube are considered for constructing lattice structures. The effects of foam density and impact velocity on the stress–strain curves, first peak stress, and energy absorption capacity are investigated. The results showed that unit cell topology has a very significant effect on the stiffness, first peak stress, failure mode, and energy absorption capacity. Among all the unit cell types, the Kelvin unit cell demonstrated the most similar behavior to experimental test results. The Weaire–Phelan unit cell, while showing promising results in low and medium densities, demonstrated unstable behavior at high impact velocity. The lattice structures with high fractions of vertical walls (truncated cube and rhombicuboctahedron) showed higher stiffness and first peak stress values as compared to lattice structures with high ratio of oblique walls (Weaire–Phelan and Kelvin). However, as for the energy absorption capacity, other factors were important. The lattice structures with high cell wall surface area had higher energy absorption capacities as compared to lattice structures with low surface area. The results of this study are not only beneficial in determining the proper unit cell type in numerical modeling of dynamic behavior of closed-cell foams, but they are also advantageous in studying the dynamic behavior of additively manufactured lattice structures with different topologies.

scholarly journals Static Mechanical Properties of Expanded Polypropylene Crushable Foam

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 249
Author(s):  
Przemysław Rumianek ◽  
Tomasz Dobosz ◽  
Radosław Nowak ◽  
Piotr Dziewit ◽  
Andrzej Aromiński
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Strain Rate ◽  
Energy Absorption ◽  
Experimental Tests ◽  
Absorption Capacity ◽  
Strain Rates ◽  
Foam Density ◽  
Energy Absorption Capacity ◽  
Closed Cell

Closed-cell expanded polypropylene (EPP) foam is commonly used in car bumpers for the purpose of absorbing energy impacts. Characterization of the foam’s mechanical properties at varying strain rates is essential for selecting the proper material used as a protective structure in dynamic loading application. The aim of the study was to investigate the influence of loading strain rate, material density, and microstructure on compressive strength and energy absorption capacity for closed-cell polymeric foams. We performed quasi-static compressive strength tests with strain rates in the range of 0.2 to 25 mm/s, using a hydraulically controlled material testing system (MTS) for different foam densities in the range 20 g/dm3 to 220 g/dm3. The above tests were carried out as numerical simulation using ABAQUS software. The verification of the properties was carried out on the basis of experimental tests and simulations performed using the finite element method. The method of modelling the structure of the tested sample has an impact on the stress values. Experimental tests were performed for various loads and at various initial temperatures of the tested sample. We found that increasing both the strain rate of loading and foam density raised the compressive strength and energy absorption capacity. Increasing the ambient and tested sample temperature caused a decrease in compressive strength and energy absorption capacity. For the same foam density, differences in foam microstructures were causing differences in strength and energy absorption capacity when testing at the same loading strain rate. To sum up, tuning the microstructure of foams could be used to acquire desired global materials properties. Precise material description extends the possibility of using EPP foams in various applications.

Numerical Investigation of Cross-Section on Aluminum A6063 Thin-Walled Structures under Low-Velocity Impact Loading

2014 ◽  
Vol 1019 ◽  
pp. 96-102
Author(s):  
Ali Taherkhani ◽  
Ali Alavi Nia
Keyword(s):  
Energy Absorption ◽  
Cross Section ◽  
Cross Sections ◽  
Peak Load ◽  
Circular Cross Section ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
Thin Walled Structures ◽  
Thin Walled ◽  
Crush Strength

In this study, the energy absorption capacity and crush strength of cylindrical thin-walled structures is investigated using nonlinear Finite Elements code LS-DYNA. For the thin-walled structure, Aluminum A6063 is used and its behaviour is modeled using power-law equation. In order to better investigate the performance of tubes, the simulation was also carried out on structures with other types of cross-sections such as triangle, square, rectangle, and hexagonal, and their results, namely, energy absorption, crush strength, peak load, and the displacement at the end of tubes was compared to each other. It was seen that the circular cross-section has the highest energy absorption capacity and crush strength, while they are the lowest for the triangular cross-section. It was concluded that increasing the number of sides increases the energy absorption capacity and the crush strength. On the other hand, by comparing the results between the square and rectangular cross-sections, it can be found out that eliminating the symmetry of the cross-section decreases the energy absorption capacity and the crush strength. The crush behaviour of the structure was also studied by changing the mass and the velocity of the striker, simultaneously while its total kinetic energy is kept constant. It was seen that the energy absorption of the structure is more sensitive to the striker velocity than its mass.

Sign in / Sign up

Export Citation Format

Share Document