A method is presented here for complete geometrical characterization of grain boundaries, based on measurement of thin films in the TEM. First, the three parameters, characterizing the misorientation of the two neighboring grains are determined from convergent beam electron diffraction (CBED). Next, the last two (of the total five macroscopic degrees of freedom) parameters are determined from bright field (BF) images to describe the orientation of the boundary plane between them. Ambiguity in the tilt direction of the plane is resolved from BF images recorded at two distinct goniometer settings. Application of the method is demonstrated in Silicon thin films. GB-plane distribution in a thin film is not necessarily identical to the distribution of similar planes in bulk materials. It was observed in low dimensional fcc metals (wires or thin films) that energy minimization of GBs can follow two (mainly alternative) routes. Either low energy planes (like {111}) are formed in 3 boundaries, or alternatively, it is observed that the GB plane has a general index (and high energy density) but it ends at both free surfaces of the sample, resulting in a GB, almost normal to the sample surface, minimizing the total area of the GB. We observed that this later type of planes is mainly characteristic of non-3 boundaries in thin Si films, crystallized from melt on glass substrates (separated by a thin SiN barrier layer). This observation is important for the expected recombination properties of the multicrystalline Si (m-Si) in planned solar cell (SC) applications.
Donald William Pashley. 21 April 1927 — 16 May 2009
