Restitution of single-cell defects in the mouse colon epithelium differs from that of cultured cells

2006 ◽  
Vol 290 (6) ◽  
pp. R1496-R1507 ◽  
Author(s):  
D. Günzel ◽  
P. Florian ◽  
J. F. Richter ◽  
H. Troeger ◽  
J. D. Schulzke ◽  
...  

Integrity of colon epithelium is of crucial importance and, as small defects occur constantly, rapid repair (restitution) is essential. To investigate the mechanism of restitution, single-cell lesions were induced in mouse colonic surface epithelia by iontophoretic injection of Ca2+. Closure of the resulting defects was monitored using confocal laser scanning microscopy (CLSM), and functional sealing by electrophysiological techniques. Restitution was evaluated as the time constant τ of the exponential decrease in conductance of an induced leak and amounted to 0.28 min under control conditions. After 4 min, the leak was completely sealed. Repair was thus considerably faster than in previously investigated HT-29/B6 cells (τ = 5.73 min). As in cultured cells, cytochalasin D delayed restitution in native colon epithelia (τ = 0.69 min), indicating the involvement of actin in the healing process; however, no accumulation of actin surrounding the lesion was detected. Long-term incubation of epithelia with IFN-γ alone or in combination with TNF-α increased τ to 0.49 and 0.59 min, respectively. In contrast to cultured cells, TNF-α alone did not affect restitution. A brief (<10 min) exposure to the sterile filtered supernatant of hemolytic E. coli O4 cultures did not affect the morphology of the epithelium, but delayed restitution. In CLSM studies, defects were still clearly visible 4 min after the onset of lesion induction. The supernatant of a nonhemolytic E. coli O4 mutant did not exhibit this effect. In conclusion, single-cell defects in native colon cause functional leaks that seal faster than in cell cultures. Proinflammatory cytokines and pathogenic bacteria delay restitution. This suggests a key role of very small lesions at the onset of pathogenic processes in the intestine.

Author(s):  
Nimisha Srivastava ◽  
Zeeshan Fatima ◽  
Chanchal Deep Kaur ◽  
Dilshad Ali Rizvi

Background: Dermatitis is a common inflammatory skin disease that is affecting up to 25% of children and 1%-3% of adults worldwide. Paucity of exact cure for dermatitis and untoward side effects of topical immunosuppressive steroids has resulted into a great need for making use of complementary medicine to treat dermatitis. Objective: The present research work involved the development of Berberine chloride dihydrate (BCD) enthused nanovesicles i.e. ethosomes for the management of dermatitis. Method: Ethosomes were prepared by slight modification of cold method using varying concentrations of SPC (1-3%) and ethanol (10-40%) Optimized batch BCD 12 was further added to Carbopol 934P for gel formation. GEL BCD 12 was subjected to “anti-bacterial, dermatitis and skin irritation study. Result: The vesicles were in size range 142.42-398.31 nm while polydispersity index (PDI) ranges from 0.114-1.56 and for zeta potential it was from-18.8 to -39.4. Entrapment efficiency was from 46.05-88.79 %. Confocal laser scanning microscopy showed penetration depth of rhodamine enthused ethosome across rat skin upto 110 µm which was significantly higher than rhodamine solution (10 µm). In the anti-bacterial study, BCD loaded ethosomal gel (EG) showed maximum zone of inhibition of 18.5 mm against E. coli, 14.5 mm against P. aeruginosa and 23.0 mm against S. aureus. In dinitrochlorobenzene (DNCB) induced mice dermatitis model histopathology study showed marked decrease in amount of inflammatory cell nucleus in mice treated with BCD loaded ethosomal gel followed by 56% and 50 % increase in ear swelling and ear mass respectively in morphology study. Conventional marketed formulation showed nominal decrease in epidermal thickness, 66.67 % increase in ear thickness and 63.64 % increase in ear mass. Further Primary irritation index was less than 0.4 indicating negligible irritation in all the groups. Conclusion: It can be concluded that ethosomal gel is not only an efficient carrier for BCD but also proves its potential for the management of dermatitis.


2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Luca Barbieri ◽  
Ioritz Sorzabal Bellido ◽  
Alison J. Beckett ◽  
Ian A. Prior ◽  
Jo Fothergill ◽  
...  

AbstractIn this work, we introduce a one-step strategy that is suitable for continuous flow manufacturing of antimicrobial PDMS materials. The process is based on the intrinsic capacity of PDMS to react to certain organic solvents, which enables the incorporation of antimicrobial actives such as salicylic acid (SA), which has been approved for use in humans within pharmaceutical products. By combining different spectroscopic and imaging techniques, we show that the surface properties of PDMS remain unaffected while high doses of the SA are loaded inside the PDMS matrix. The SA can be subsequently released under physiological conditions, delivering a strong antibacterial activity. Furthermore, encapsulation of SA inside the PDMS matrix ensured a diffusion-controlled release that was tracked by spatially resolved Raman spectroscopy, Attenuated Total Reflectance IR (ATR-IR), and UV-Vis spectroscopy. The biological activity of the new material was evaluated directly at the surface and in the planktonic state against model pathogenic bacteria, combining confocal laser scanning microscopy, electron microscopy, and cell viability assays. The results showed complete planktonic inhibition for clinically relevant strains of Staphylococcus aureus and Escherichia coli, and a reduction of up to 4 orders of magnitude for viable sessile cells, demonstrating the efficacy of these surfaces in preventing the initial stages of biofilm formation. Our approach adds a new option to existing strategies for the antimicrobial functionalisation of a wide range of products such as catheters, wound dressings and in-dwelling medical devices based on PDMS.


2021 ◽  
Vol 12 ◽  
Author(s):  
Sairong Fan ◽  
Yanxing Wang ◽  
Yue Zhang ◽  
Yamin Wu ◽  
Xiaoming Chen

Achyranthes bidentata Blume, a traditional Chinese medicine, is widely acknowledged for its function of invigorating the liver and kidneys and as a stranguria-relieving diuretic and used in the treatment of edema, gonorrhea, and other diseases. Polysaccharide (ABPS), isolated from Achyranthes bidentata Blume, has been demonstrated to have multiple biological activities including immunomodulatory effects. However, the mechanisms underlying the effects of ABPS have not been fully investigated. The present study is conducted to explore the underlying mechanism of immunomodulatory activities of ABPS. Results showed that ABPS significantly increased the secretion of IL-1β and TNF-α in J744 A.1 cells. Nitric oxide (NO) also significantly increased after ABPS treatment. The special antibodies (Toll-like receptor 4 (TLR4) antibody and CD14/TLR4 antibody) significantly decreased the activation, while the Toll-like receptor 2 (TLR2) antibody could not abolish this activation. Meanwhile, pyrrolidine dithiocarbamate (PDTC), a specific inhibitor of NF-κB, remarkably inhibited the secretion of IL-1β and TNF-α induced by ABPS in J744 A.1 cells. Western blotting (WB) and confocal laser scanning microscopy (CLSM) showed that ABPS promoted NF-κB translocation into the nucleus. Furthermore, the mRNA and protein expression of TLR4 and MyD88 were significantly increased after ABPS treatment. Taken together, these findings suggested that the immunomodulatory mechanism of ABPS was associated with the secretion of cytokines by stimulating the NF-κB pathway through TLR4/MyD88 signaling.


Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 467 ◽  
Author(s):  
Fátima García-Villén ◽  
Angela Faccendini ◽  
Dalila Miele ◽  
Marco Ruggeri ◽  
Rita Sánchez-Espejo ◽  
...  

Background: hydrogels prepared with natural inorganic excipients and spring waters are commonly used in medical hydrology. Design of these clay-based formulations continues to be a field scarcely addressed. Safety and wound healing properties of different fibrous nanoclay/spring water hydrogels were addressed. Methods: in vitro biocompatibility, by means of MTT assay, and wound healing properties were studied. Confocal Laser Scanning Microscopy was used to study the morphology of fibroblasts during the wound healing process. Results: all the ingredients demonstrated to be biocompatible towards fibroblasts. Particularly, the formulation of nanoclays as hydrogels improved biocompatibility with respect to powder samples at the same concentration. Spring waters and hydrogels were even able to promote in vitro fibroblasts motility and, therefore, accelerate wound healing with respect to the control. Conclusion: fibrous nanoclay/spring water hydrogels proved to be skin-biocompatible and to possess a high potential as wound healing formulations. Moreover, these results open new prospects for these ingredients to be used in new therapeutic or cosmetic formulations.


2009 ◽  
Vol 53 (6) ◽  
pp. 2253-2258 ◽  
Author(s):  
Joe J. Harrison ◽  
William D. Wade ◽  
Sarah Akierman ◽  
Caterina Vacchi-Suzzi ◽  
Carol A. Stremick ◽  
...  

ABSTRACT Escherichia coli is refractory to elevated doses of antibiotics when it is growing in a biofilm, and this is potentially due to high numbers of multidrug-tolerant persister cells in the surface-adherent population. Previously, the chromosomal toxin-antitoxin loci hipBA and relBE have been linked to the frequency at which persister cells occur in E. coli populations. In the present study, we focused on the dinJ-yafQ-encoded toxin-antitoxin system and hypothesized that deletion of the toxin gene yafQ might influence cell survival in antibiotic-exposed biofilms. By using confocal laser scanning microscopy and viable cell counting, it was determined that a ΔyafQ mutant produced biofilms with a structure and a cell density equivalent to those of the parental strain. In-depth susceptibility testing identified that relative to wild-type E. coli, the ΔyafQ strain had up to a ∼2,400-fold decrease in cell survival after the biofilms were exposed to bactericidal concentrations of cefazolin or tobramycin. Corresponding to these data, controlled overexpression of yafQ from a high-copy-number plasmid resulted in up to a ∼10,000-fold increase in the number of biofilm cells surviving exposure to these bactericidal drugs. In contrast, neither the inactivation nor the overexpression of yafQ affected the tolerance of biofilms to doxycycline or rifampin (rifampicin). Furthermore, deletion of yafQ did not affect the tolerance of stationary-phase planktonic cells to any of the antibacterials tested. These results suggest that yafQ mediates the tolerance of E. coli biofilms to multiple but specific antibiotics; moreover, our data imply that this cellular pathway for persistence is likely different from that of multidrug-tolerant cells in stationary-phase planktonic cell cultures.


2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Ji-yin Li ◽  
Xue-jin Wang ◽  
Li-na Wang ◽  
Xiao-xia Ying ◽  
Xiang Ren ◽  
...  

In order to investigate the potential of short antimicrobial peptides (AMPs) as alternative antibacterial agents during the treatment of peri-implantitis, the cytotoxic activity of three short AMPs, that is, Pac-525, KSL-W, and KSL, was determined using the MTT assay. The antimicrobial activity of these AMPs, ranging in concentration from 0.0039 mg/mL to 0.5 mg/mL, against the predominant planktonic pathogens, includingStreptococcus sanguis, Fusobacterium nucleatum, andPorphyromonas gingivalis, involved in peri-implantitis was investigated. Furthermore, 2-day-oldP. gingivalisbiofilms cultured on titanium surfaces were treated with Pac-525 and subsequently observed and analysed using confocal laser scanning microscopy (CLSM). The average cell proliferation curve indicated that there was no cytotoxicity due to the three short AMPs. The minimum inhibitory concentration and minimum bactericidal concentration values of Pac-525 were 0.0625 mg/mL and 0.125 mg/mL, respectively, forP. gingivalisand 0.0078 mg/mL and 0.0156 mg/mL, respectively, forF. nucleatum. Using CLSM, we confirmed that compared to 0.1% chlorhexidine, 0.5 mg/mL of Pac-525 caused a significant decrease in biofilm thickness and a decline in the percentage of live bacteria. These data indicate that Pac-525 has unique properties that might make it suitable for the inhibition the growth of pathogenic bacteria around dental implants.


2021 ◽  
Author(s):  
Aref Abbasi Moud ◽  
Amir Sanati Nezhad ◽  
Seyed Hossein Hejazi

Abstract Cellulose nano crystal (CNC) hydrogels, while mechanically weak, have unique properties such as easy synthesis, high water content, and biocompatibility. Further improvement is needed to make CNC hydrogels mechanically stable and self-healable. Herein, using quantitative fluorescence recovery after photobleaching (FRAP) analysis, we assess stability, collapse, and level of self-healing of CNC hydrogels with different CNC and sodium chloride (NaCl) concentrations. We use the mean signal intensity obtained by confocal laser scanning microscopy (CLSM) to measure signal loss of the samples made of CNC hydrogels of different CNC concentrations and as a function of initial gel height and NaCl loading. The CNC dynamics inside the gels based on universality curves is unraveled which links the zeta potentials to the immobile particle percentages and the storage moduli as a function of NaCl/CNC concentration ratio. FRAP recovery analysis shows that for the ratio of NaCl/CNC beyond 0.1, the mobility of the ensemble of CNC particles becomes severely restricted. Hydrogel samples with low CNC concentrations (6 g/L and 10 g/L) experience a more substantial collapse rate under gravity than the rate observed for samples with a high CNC concentration (30 g/L). Increasing the CNC concentration hinders particle mobility and thus impedes the self-healing process. Quantification of the gel collapse behavior of CNC gel and its self-healing property is critical in many applications, including water and air filters, oil spill sponges, and tissue engineering.


2007 ◽  
Vol 73 (13) ◽  
pp. 4300-4307 ◽  
Author(s):  
Shuyu Hou ◽  
Erik A. Burton ◽  
Karen A. Simon ◽  
Dustin Blodgett ◽  
Yan-Yeung Luk ◽  
...  

ABSTRACT Bacterial biofilms cause serious problems, such as antibiotic resistance and medical device-related infections. To further understand bacterium-surface interactions and to develop efficient control strategies, self-assembled monolayers (SAMs) of alkanethiols presenting different functional groups on gold films were analyzed to determine their resistance to biofilm formation. Escherichia coli was labeled with green florescence protein, and its biofilm formation on SAM-modified surfaces was monitored by confocal laser scanning microscopy. The three-dimensional structures of biofilms were analyzed with the COMSTAT software to obtain information about biofilm thickness and surface coverage. SAMs presenting methyl, l-gulonamide (a sugar alcohol tethered with an amide bond), and tri(ethylene glycol) (TEG) groups were tested. Among these, the TEG-terminated SAM was the most resistant to E. coli biofilm formation; e.g., it repressed biofilm formation by E. coli DH5α by 99.5% ± 0.1% for 1 day compared to the biofilm formation on a bare gold surface. When surfaces were patterned with regions consisting of methyl-terminated SAMs surrounded by TEG-terminated SAMs, E. coli formed biofilms only on methyl-terminated patterns. Addition of TEG as a free molecule to growth medium at concentrations of 0.1 and 1.0% also inhibited biofilm formation, while TEG at concentrations up to 1.5% did not have any noticeable effects on cell growth. The results of this study suggest that the reduction in biofilm formation on surfaces modified with TEG-terminated SAMs is a result of multiple factors, including the solvent structure at the interface, the chemorepellent nature of TEG, and the inhibitory effect of TEG on cell motility.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Nobuaki Negishi ◽  
Tomohiro Inaba ◽  
Yukari Miyazaki ◽  
Genki Ishii ◽  
Yingnan Yang ◽  
...  

AbstractNanoneedle structures on dragonfly and cicada wing surfaces or black silicon nanoneedles demonstrate antibacterial phenomena, namely mechano-bactericidal action. These air-exposed, mechano-bactericidal surfaces serve to destroy adherent bacteria, but their bactericidal action in the water is no precedent to report. Calcium carbonate easily accumulates on solid surfaces during long-term exposure to hard water. We expect that aragonite nanoneedles, in particular, which grow on TiO2 during the photocatalytic treatment of calcium-rich groundwater, exhibit mechano-bactericidal action against bacteria in water. Here, we showed that acicular aragonite modified on TiO2 ceramics prepared from calcium bicarbonate in mineral water by photocatalysis exhibits mechanical bactericidal activity against E. coli in water. Unmodified, calcite-modified and aragonite-modified TiO2 ceramics were exposed to water containing E. coli (in a petri dish), and their bactericidal action over time was investigated under static and agitated conditions. The surfaces of the materials were observed by scanning electron microscopy, and the live/dead bacterial cells were observed by confocal laser scanning microscopy. As a result, the synergistic bactericidal performance achieved by mechano-bactericidal action and photocatalysis was demonstrated. Aragonite itself has a high biological affinity for the human body different from the other whisker-sharpen nanomaterials, therefore, the mechano-bactericidal action of acicular aragonite in water is expected to inform the development of safe water purification systems for use in developing countries.


Sign in / Sign up

Export Citation Format

Share Document