scholarly journals Analysis of Polymorphic Nanocrystals ofTiO2by X-Ray Rietveld Refinement and High-Resolution Transmission Electron Microscopy: Acetaldehyde Decomposition

2008 ◽  
Vol 2008 ◽  
pp. 1-5 ◽  
Author(s):  
R. Carrera ◽  
N. Castillo ◽  
E. Arce ◽  
A. L. Vázquez ◽  
M. Moran-Pineda ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Rietveld Refinement ◽  
Sol Gel ◽  
Photocatalytic Decomposition ◽  
X Ray ◽  
Transmission Electron ◽  
Treated Sample ◽  
Crystallite Sizes ◽  
Brookite Phase ◽  
Small Crystallite

In this work,TiO2nanocrystals were synthesized by the sol-gel method. These materials were annealed at 200 and500∘C; and characterized by the XRD-Rietveld refinement; and by BET and TEM. As for the low-temperature-treated sample (200∘C), nanocrystals with small crystallite sizes (7 nm) and high abundance of anatase, coexisting with the brookite phase, were obtained. Meanwhile, the sample annealed at500∘C showed an increased crystallite size (22 nm) and an important polymorphic increment. The sample annealed at200∘C showed a high activity in the photocatalytic decomposition of acetaldehyde.

scholarly journals Effect of Eu3+ Concentration on the BaAl2O4/CaAl4O7: x% Eu3+ (0 ≤ x ≤ 5.5) Mixed-Phase Nanophosphors Synthesized Using Citrate Sol-Gel Method

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Bamba Mahman ◽  
Mpho Enoch Sithole
Keyword(s):  
Electron Microscopy ◽  
Sol Gel ◽  
Mixed Phase ◽  
Nanometer Scale ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Morphology ◽  
Crystallite Sizes ◽  
Gel Technique

A series of undoped mixed-phase BaAl2O4/CaAl4O7 (hereafter called BC) and doped BC: x% Eu3+ (0 < x ≤ 5.5) nanophosphors were successfully prepared by the citrate sol-gel technique. Their structure, morphology, and optical properties were studied in detail by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and photoluminescence (PL) spectroscopy. XRD and SEM showed that all the BC:x% Eu3+ samples consisted of the crystalline structure of the mixed phases of both the BaAl2O4 and CaAl4O7 materials. The structure resembles more that of the BaAl2O4 than the CaAl4O7 phase. The TEM results suggest that the crystallite sizes are in the nanometer scale with rod-like particles. PL results showed multiple emission peaks located at 436, 590, 616, 656, and 703 nm, which were assigned to the intrinsic defects within the BC matrix, 5D0 ⟶ 7F1, 5D0 ⟶ 7F2, 5D0 ⟶ 7F3, and 5D0 ⟶ 7F4 transitions of Eu3+, respectively. The decay curves evidently showed that the nanophosphors have persistent luminescence. The Commission Internationale de l’Eclairage (CIE) analysis revealed that doping has tuned the emission colour from blue to orange-red. The results indicate that the Eu3+-doped samples can potentially be used in the orange/red-emitting phosphors.

scholarly journals Synthesis, characterization and in vitro cytotoxicity study of Co and Ni ferrite nanoparticles prepared by sol-gel method

2021 ◽  
Vol 3 (7) ◽  
Author(s):  
Alexandre Pancotti ◽  
Dener Pereira Santos ◽  
Dielly Oliveira Morais ◽  
Mauro Vinícius de Barros Souza ◽  
Débora R. Lima ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Test Sample ◽  
In Vitro Cytotoxicity ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Transmission Electron ◽  
Crystallite Sizes

AbstractIn this study, we report the synthesis and characterization of NiFe2O4 and CoFe2O4 nanoparticles (NPs) which are widely used in the biomedical area. There is still limited knowledge how the properties of these materials are influenced by different chemical routes. In this work, we investigated the effect of heat treatment over cytotoxicity of cobalt and niquel ferrites NPs synthesized by sol-gel method. Then the samples were studied using transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), Fourier Transform Infrared Spectroscopy Analysis (FTIR), and X-ray fluorescence (XRF). The average crystallite sizes of the particles were found to be in the range of 20–35 nm. The hemocompatibility (erythrocytes and leukocytes) was checked. Cytotoxicity results were similar to those of the control test sample, therefore suggesting hemocompatibility of the tested materials.

Effect of Synthesis Temperature on Particles Size and Morphology of Zirconium Oxide Nanoparticle

2017 ◽  
Vol 50 ◽  
pp. 18-31 ◽  
Author(s):  
Rudzani Sigwadi ◽  
Simon Dhlamini ◽  
Touhami Mokrani ◽  
Patrick Nonjola
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Zirconium Oxide ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Crystallite Sizes ◽  
Ft Ir

The paper presents the synthesis and investigation of zirconium oxide (ZrO2) nanoparticles that were synthesised by precipitation method with the effects of the temperatures of reaction on the particles size, morphology, crystallite sizes and stability at high temperature. The reaction temperature effect on the particle size, morphology, crystallite sizes and stabilized a higher temperature (tetragonal and cubic) phases was studied. Thermal decomposition, band structure and functional groups were analyzed by Brunauer-Emmett-Teller (BET), Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Thermo-gravimetric analysis (TGA) and Fourier transform infrared (FT-IR). The crystal structure was determined using X-ray diffraction. The morphology and the particle size were studied using (SEM) and (TEM). The shaped particles were confirmed through the SEM analysis. The transmission electron microscopic analysis confirmed the formation of the nanoparticles with the particle size. The FT-IR spectra showed the strong presence of ZrO2 nanoparticles.

Synthesis of Nanosized HMS Mesoporous Molecular Sieve in an Ionic Liquid-Water Mixture

2011 ◽  
Vol 236-238 ◽  
pp. 2110-2113
Author(s):  
Hong Liu ◽  
Meng Yang Wang ◽  
Wei Ran Cao
Keyword(s):  
Electron Microscopy ◽  
Ionic Liquid ◽  
Sol Gel ◽  
Mesoporous Molecular Sieve ◽  
Nano Particles ◽  
Water Mixture ◽  
X Ray ◽  
Transmission Electron ◽  
Adsorption Desorption ◽  
Synthesized Materials

The hexagonal mesoporous silica (HMS) nano-particles were prepared in mixture of 1-butyl-3-methyl-imidazolium tetrafluoroborate (BMIM+BF4-) ionic liquid and water by a sol-gel method. The structure and morphology of obtained materials were characterized by X-ray powder diffraction (XRD), N2adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The influence of the amount of BMIM+BF4-was investigated. It was shown that the synthesized materials have discrete and uniform spherical morphology with the size in the range of 68-177 nm (obtained from DLS measurements), and the particle size of HMS can be controlled by varying the amount of BMIM+BF4-.

Synthesis and Thermal Stability of Nontransformable Tetragonal (ZrO2)0.96(REO1.5)0.04 (Re=Sc3+, Y3+) Nanocrystals

2013 ◽  
Vol 334-335 ◽  
pp. 60-64 ◽  
Author(s):  
Mohammad Reza Loghman-Estark ◽  
Reza Shoja Razavi ◽  
Hossein Edris
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Scanning Electron Microscopy ◽  
Sol Gel ◽  
Average Diameter ◽  
X Ray ◽  
Transmission Electron ◽  
20 Nm ◽  
Thermal Stability Of ◽  
Scanning Electron

Scandia, yttria doped zirconia ((ZrO2)0.96(REO1.5)0.04(RE=Sc3+, Y3+)) nanoparticles were prepared by the modified sol-gel method. The microstructure of the products was characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy. Thermal stabillity of SYSZ nanocrystals were also investigated. The SYSZ nanocrystals synthesized with EGM:Zr+4mole ratio 4:1, calcined at 700°C, have average diameter of ~20 nm.

Sol-gel processing of nanocrystalline haematite thin films

1997 ◽  
Vol 12 (6) ◽  
pp. 1441-1444 ◽  
Author(s):  
L. Armelao ◽  
A. Armigliato ◽  
R. Bozio ◽  
P. Colombo
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Raman Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Single Particles ◽  
X Ray ◽  
Transmission Electron ◽  
Gel Processing

The microstructure of Fe2O3 sol-gel thin films, obtained from Fe(OCH2CH3)3, was investigated by x-ray diffraction (XRD), transmission electron microscopy (TEM), and Raman spectroscopy. Samples were nanocrystalline from 400 °C to 1000 °C, and the crystallized phase was haematite. In the coatings, the α–Fe2O3 clusters were dispersed as single particles in a network of amorphous ferric oxide.

Synthesis and Characterization of SiO2@Y2MoO6:Eu3+ Core–Shell Structured Spherical Phosphors by Sol–Gel Process

2016 ◽  
Vol 16 (4) ◽  
pp. 3914-3920 ◽  
Author(s):  
G. Z Li ◽  
F. H Liu ◽  
Z. S Chu ◽  
D. M Wu ◽  
L. B Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Annealing Temperature ◽  
Uv Light ◽  
Sol Gel ◽  
Spherical Shape ◽  
Core Shell ◽  
X Ray ◽  
Transmission Electron ◽  
Sol Gel Process ◽  
Average Size

SiO2@Y2MoO6:Eu3+ core–shell phosphors were prepared by the sol–gel process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra as well as kinetic decays were used to characterize the resulting SiO2@Y2MoO6:Eu3+ core–shell phosphors. The XRD results demonstrated that the Y2MoO6:Eu3+ layers on the SiO2 spheres crystallized after being annealed at 700 °C and the crystallinity increased with raising the annealing temperature. The obtained core–shell phosphors have spherical shape with narrow size distribution (average size ca. 640 nm), non-agglomeration, and smooth surface. The thickness of the Y2MoO6:Eu3+ shells on the SiO2 cores could be easily tailored by varying the number of deposition cycles (70 nm for four deposition cycles). The Eu3+ shows a strong PL emission (dominated by 5D0–7F2 red emission at 614 nm) under the excitation of 347 nm UV light. The PL intensity of Eu3+ increases with increasing the annealing temperature and the number of coating cycles.

Microstructural characteristics and photoluminescence performance of nanograined thermally treated CeO2-TiO2 xerogels

2007 ◽  
Vol 22 (5) ◽  
pp. 1182-1187
Author(s):  
Amita Verma ◽  
A.K. Srivastava ◽  
N. Karar ◽  
Harish Chander ◽  
S.A. Agnihotry
Keyword(s):  
Electron Microscopy ◽  
Crystallite Size ◽  
Sol Gel ◽  
Structural Features ◽  
X Ray Diffraction ◽  
Molar Ratios ◽  
Transmission Electron ◽  
Sol Gel Process ◽  
Crystallite Sizes ◽  
Thermally Treated

Nanostructured thermally treated xerogels have been synthesized using a sol-gel process involving cerium (Ce) chloride heptahydrate and titanium (Ti) propoxide mixed in different Ce:Ti molar ratios. Structural features of the xerogels have been correlated with their photoluminescence (PL) response. The crystallite sizes in the samples lie in the nanorange. The x-ray diffraction and transmission electron microscopy results have confirmed the coexistence of CeO2 and TiO2 nanocrystallites in these xerogels. In general, a decrease in the CeO2 crystallite size and an increase in the TiO2 crystallite size are observed in the xerogels as a function of Ti content. Scanning electron microscopy results have evidenced the evolution of ordered structure in the xerogels as a function of TiO2 content. Although both of the phases (CeO2 and TiO2) have exhibited PL in ultraviolet and visible regions, the major luminescence contribution has been made by the CeO2 phase. The largest sized CeO2 crystallites in 1:1 thermally treated xerogel have led to its highest PL response. PL emission in the xerogels is assigned to their nanocrystalline nature and oxygen vacancy-related defects.

Study of the Surface Morphology and the Microstructure of PAN-Based Carbon Fibers

2011 ◽  
Vol 239-242 ◽  
pp. 1279-1282
Author(s):  
Xue Jun Zhang ◽  
Zan Han ◽  
Yan Hong Tian ◽  
Yan Feng Yang
Keyword(s):  
Electron Microscopy ◽  
Carbon Fibers ◽  
Interlayer Spacing ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Graphite Crystallite ◽  
Crystallite Sizes ◽  
Degree Of Graphitization ◽  
Better Than

The microstructure of two kinds of self-made PAN-based high-modulus carbon fibers (HMCF-1, HMCF-2) was studied by scanning electron microscopy (SEM), Raman spectroscopy, X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM), and was compared with that of T800 and M55J. The correlation of XRD and HRTEM in terms of graphite crystallite sizes and interlayer spacing of graphite layer was also investigated. The results show that the diameters of T800, HMCF-1 and HMCF-2 are almost the same (~5.20μm) and all of them are lager than that of M55J (~4.86μm). The crystal sizes and the degree of graphitization are in the order of HMCF-2>HMCF-1>M55J>T800, while the regularity of the lattice fringes of HMCF-2 is better than those of others.

Sign in / Sign up

Export Citation Format

Share Document