scholarly journals Temporary Vascular Occlusion by Rapid Reverse Phase Polymer: A Preliminary In Vitro Study of Retrograde Injection

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Einar Dregelid

During vascular surgical operations, there is a need for a simpler and more reliable method of temporary arterial occlusion than those currently employed, especially of heavily calcified arteries. A thermosensitive polymer, LeGoo (LG) (Pluromed, Woburn, MA), has been used successfully for temporary vascular occlusion. It has hitherto been injected by a cannula that has been introduced into the artery to be occluded, here henceforth called the “cannulation method.” Injection into arterial ostia without cannulation, using an injection device that arrests blood flow during the injection, here henceforth called “a retrograde method” may enable temporary hemostasis when ostial stenoses render it impossible to inject LG using the cannulation method. The objective of the present study was to study the feasibility of a retrograde method and to compare it with the cannulation method in an in vitro model, incorporating a narrow orifice to simulate ostial stenosis, using tap water at 37°C instead of blood. The retrograde method of LG injection, using a modified paediatric Foley catheter, turned out to be feasible to produce a durable LG plug more reliably, at higher water pressure and with less deep LG injection than with the cannulation method.

2016 ◽  
Vol 45 (4) ◽  
pp. 234-239 ◽  
Author(s):  
Priscilla Barbosa Ferreira SOARES ◽  
Aletheia Moraes ROCHA ◽  
Manuella Verdinelli de Paula REIS ◽  
Camilla Christian Gomes MOURA ◽  
Carlos José SOARES

Abstract Objective This study evaluated four types of pH adjustment of the coconut water (CW) on viability of human fibroblasts (HFF). Material and method Natural and industrialized CW were adjusted to pH 7.0 using: (1) Sodium Hidroxide (NaOH), (2) Sodium bicarbonate (NaHCO3), (3) Triethanolamine (C6H15NO3), (4) 2-Amino-2-Methil-1-Propanol (C4H11NO). Fibroblasts were plated at 2×104/ well in 96 well plates and maintained in the CW solutions for 2 h and 4 h. Positive control was represented by HFF maintained in DMEM and the negative control by tap water. Cell viability was analyzed by MTT formazan method. Data were analyzed by 3-way ANOVA followed by Tukey’s and Dunnet’s test. Result There are no significant effect on the cell viability regarding type of CW, period of evaluation, and the interactions between CW and period of evaluation, CW and pH adjustment method, pH adjustment method and period of evaluation (p>0.05). Conclusion The product used for CW pH adjustment did not influenced HFF viability, thought there are a tendency of better performance in natural CW.


2018 ◽  
Vol 3 (3) ◽  
pp. 1-10 ◽  
Author(s):  
Madhuravasal Krishnan Janani ◽  
Venkatakrishnan Jaichandran ◽  
Hajib Narahari Rao Madhavan ◽  
Lingam Vijaya ◽  
Ronnie Jacob George ◽  
...  

Purpose: To evaluate the effect of lignocaine on growth and apoptosis indication of primary human Tenon’s capsule fibroblast (HTFs) in an in vitro model. Patients and Methods: Tenon’s capsule tissue obtained from patients undergoing trabeculectomy were grown in cell culture medium. The effect of different concentrations of lignocaine (0.5, 1.0, 1.5, and 2%) on the morphology and growth of the fibroblasts was studied using microscopy, cell viability, and proliferation assay, and apoptosis was detected using the FITC Annexin V Apoptosis Kit. Results: Morphological changes similar to those of apoptotic cells, including cytoplasmic vacuolation, shrinkage, and rounding were visualized in the cells treated with concentrations greater than 1.0% (i.e., 1.5, 2.0%). Though proliferation inhibition was found with all four concentrations (0.5–2.0%), the viability of cells decreased from 1.0% lignocaine. Conclusion: 0.5% lignocaine prevents proliferation of fibroblasts without causing apoptosis in vitro.


1996 ◽  
Vol 33 (2) ◽  
pp. 150-156 ◽  
Author(s):  
James P. Bradley ◽  
Jamie P. Levine ◽  
Christopher Blewett ◽  
Thomas Krummel ◽  
Joseph G. Mccarthy ◽  
...  

The biology underlying craniosynostosis remains unknown. Previous studies have shown that the underlying dura mater, not the suture itself, signals a suture to fuse. The purpose of this study was to develop an in vitro model for cranial-suture fusion that would still allow for suture-dura interaction, but without the influence of tensional forces transmitted from the cranial base. This was accomplished by demonstrating that the posterior frontal mouse cranial suture, known to be the only cranial suture that fuses in vivo, fuses when plated with its dura in an organ-culture system. In such an organ-culture system, the sutures are free from both the influence of dural forces transmitted from the cranial base and from hormonal influences only available in a perfused system. For the cranial-suture fusion in vitro model study, the sagittal sutures (controls that remain patent in vivo) and posterior frontal sutures (that fuse in vivo) with the underlying dura were excised from 24-day-old euthanized mice, cut into 5 × 4 × 2-mm specimens, and cultured in a chemically defined, serum-free media. One hundred sutures were harvested at the day of sacrifice, then every 2 days thereafter until 30 days in culture, stained with H & E, and analyzed. A subsequent cranial-suture without dura in vitro study was performed in a similar fashion to the first study, but only the calvariae with the posterior frontal or sagittal sutures (without the underlying dura) were cultured. Results from the cranial-suture fusion in vitro model study showed that all sagittal sutures placed in organ culture with the underlying dura remained patent. More importantly, the posterior frontal sutures with the underlying dura, which were plated-down as patent at 24 days of age, demonstrated fusion after various growth periods in organ culture. In vitro posterior frontal mouse-suture fusion occurred in an anterior-to-posterior direction but in a delayed fashion, 4 to 7 days later than in vivo posterior frontal mouse-suture fusion. In contrast, the subsequent cranial-suture without dura in vitro study showed patency of all sutures, including the posterior frontal suture. These data from in vitro experiments indicate that: (1) mouse calvariae, sutures, and the underlying dura survive and grow in organ-culture systems for 30 days; (2) the local dura, free from external influences transmitted from the cranial base and hormones from distant sites, influences the cells of its overlying suture to cause fusion; and (3) without dura influence, all in vitro cranial sutures remained patent. By first identifying the factors involved in dural-suture signaling and then regulating these factors and their receptors, the biologic basis of suture fusion and craniosynostosis may be unraveled and used in the future to manipulate pathologic (premature) suture fusion.


Plant Disease ◽  
2020 ◽  
Vol 104 (3) ◽  
pp. 724-730 ◽  
Author(s):  
Qing Ge ◽  
Paul A. Cobine ◽  
Leonardo De La Fuente

Xylella fastidiosa is a xylem-limited plant pathogenic bacterium that causes disease in many crops worldwide. Copper (Cu) is an antimicrobial agent widely used on X. fastidiosa hosts to control other diseases. Although the effects of Cu for control of foliar pathogens are well known, it is less studied on xylem-colonizing pathogens. Previous results from our group showed that low concentrations of CuSO4 increased biofilm formation, whereas high concentrations inhibited biofilm formation and growth in vitro. In this study, we conducted in planta experiments to determine the influence of Cu in X. fastidiosa infection using tobacco as a model. X. fastidiosa-infected and noninfected plants were watered with tap water or with water supplemented with 4 mM or 8 mM of CuSO4. Symptom progression was assessed, and sap and leaf ionome analysis was performed by inductively coupled plasma with optical emission spectroscopy. Cu uptake was confirmed by increased concentrations of Cu in the sap of plants treated with CuSO4-amended water. Leaf scorch symptoms in Cu-supplemented plants showed a trend toward more severe at later time points. Quantification of total and viable X. fastidiosa in planta indicated that CuSO4-amended treatments did not inhibit but slightly increased the growth of X. fastidiosa. Cu in sap was in the range of concentrations that promote X. fastidiosa biofilm formation according to our previous in vitro study. Based on these results, we proposed that the plant Cu homeostasis machinery controls the level of Cu in the xylem, preventing it from becoming elevated to a level that would lead to bacterial inhibition.


Author(s):  
Farshid Saadat ◽  
◽  
Zohreh Zareighane ◽  
Farnaz Safavifar ◽  
Seyedeh Zohreh Jalali ◽  
...  

Introduction: Glioblastoma is an aggressive malignancy of human brain with poorly understood pathogenesis. Voltage-gated potassium (Kv) channels and Matrix metalloproteinases (MMPs) are highly expressed in malignant tumors and involved in the progression and metastasis of glioblastoma. The purpose of this study was to determine whether a voltage-dependent potassium channel blocker could modulate astrocytes as a cell which involved in immunopathogenesis of glioblastoma. Methods: The cytotoxic effect of 4-aminopyridine (4-AP) at different doses in cell model of glioblastoma was measured by MTT assay. ELISA technique and gelatin zymography were used to assess cytokines levels and MMP-9 after 4-AP treatment, respectively. Results: Cytotoxicity analysis showed that cell viability reduced by increasing 4-AP level and cell growth reduced gradually by removing 4-AP from cell medium. 4-AP inhibits secretion of IL-6 and IL-1 (p<0.05). MMP9 activity significantly inhibits with increased 4-AP dose as compared to non-treated cells. Conclusion: Reduction of cell viability, IL-6 secretion and MMP-9 activity in an in vitro model of glioblastoma, might be assumed 4-AP as an agent for chemoprevention of cancer.


Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5537
Author(s):  
Perry Raz ◽  
Haya Meir ◽  
Shifra Levartovsky ◽  
Maia Peleg ◽  
Alon Sebaoun ◽  
...  

Our aim was to analyze the correlation between the IT evaluated by a surgical motor and the primary implant stability (ISQ) measured by two RFA devices, Osstell and Penguin, in an in vitro model. This study examines the effect of bone type (soft or dense), implant length (13 mm or 8 mm), and implant design (CC: conical connection; IH: internal hexagon), on this correlation. Ninety-six implants were inserted using a surgical motor (IT) into two types of synthetic foam blocks. Initial measurements for both the peak IT and ISQ were recorded at the point when implant insertion was stopped by the surgical motor, and the final measurements were recorded when the implant was completely inserted into the synthetic blocks using only the RFA devices. Our null hypothesis was that there is a good correlation between the devices, independent of the implant length, design, or bone type. We found a positive, significant correlation between the IT, and the Osstell and Penguin devices. Implant length and bone type did not affect this correlation. The correlation between the devices in the CC design was maintained; however, in the IH design it was maintained only between the RFA devices. We concluded that there is a high positive correlation between the IT and ISQ from a mechanical perspective, which was not affected by bone type or implant length but was affected by the implant design.


2008 ◽  
Vol 295 (3) ◽  
pp. G534-G541 ◽  
Author(s):  
Jordan D. Chambers ◽  
Joel C. Bornstein ◽  
Evan A. Thomas

Segmentation in the guinea pig small intestine consists of a number of discrete motor patterns including rhythmic stationary contractions that occur episodically at specific locations along the intestine. The enteric nervous system regulates segmentation, but the exact circuit is unknown. Using simple computer models, we investigated possible circuits. Our computational model simulated the mean neuron firing rate in the feedforward ascending and descending reflex pathways. A stimulus-evoked pacemaker was located in the afferent pathway or in a feedforward pathway. Output of the feedforward pathways was fed into a simple model to determine the response of the muscle. Predictions were verified in vitro by using guinea pig jejunum, in which segmentation was induced with luminal fatty acid. In the computational model, local stimuli produced an oral contraction and anal dilation, similar to in vitro responses to local distension, but did not produce segmentation. When the stimulus was distributed, representing a nutrient load, the result was either a tonic response or globally synchronized oscillations. However, when we introduced local variations in synaptic coupling, stationary contractions occurred around these locations. This predicts that severing the ascending and descending pathways will induce stationary contractions. An acute lesion in our in vitro model significantly increased the number of stationary contractions immediately oral and anal to the lesion. Our results suggest that spatially localized rhythmic contractions arise from a local imbalance between ascending excitatory and descending inhibitory muscle inputs and require a distributed stimulus and a rhythm generator in the afferent pathway.


2019 ◽  
Vol 26 (5) ◽  
pp. 704-713 ◽  
Author(s):  
Seline R. Goudeketting ◽  
Jenske J. M. Vermeulen ◽  
Kim van Noort ◽  
Gerben te Riet o. g. Scholten ◽  
Henny Kuipers ◽  
...  

Purpose: This study investigated the effect of different EndoAnchor configurations on aortic endograft displacement resistance in an in vitro model. Materials and Methods: An in vitro model was developed and validated to perform displacement force measurements on different EndoAnchor configurations within an endograft and silicone tube. Five EndoAnchor configurations were created: (1) 6 circumferentially deployed EndoAnchors, (2) 5 EndoAnchors within 120° of the circumference and 1 additional, contralateral EndoAnchor, (3) 4 circumferentially deployed EndoAnchors, (4) 2 rows of 4 circumferentially deployed EndoAnchors, and (5) a configuration of 2 columns of 3 EndoAnchors. An experienced vascular surgeon deployed EndoAnchors under C-arm guidance at the proximal sealing zone of the endograft. A constant force with increments of 1 newton (N) was applied to the distal end of the endograft. The force necessary to displace a part of the endograft by 3 mm was defined as the endograft displacement force (EDF). Two video cameras recorded the measurements. Videos were examined to determine the exact moment 3-mm migration had occurred at part of the endograft. Five measurements were performed after each deployed EndoAnchor for each configuration. Measurements are given as the median and interquartile range (IQR) Q1, Q3. Results: Baseline displacement force measurement of the endograft without EndoAnchors resulted in a median EDF of 5.1 N (IQR 4.8, 5.2). The circumferential distribution of 6 EndoAnchors resulted in a median EDF of 53.7 N (IQR 49.0, 59.0), whereas configurations 2 through 5 demonstrated substantially lower EDFs of 29.0 N (IQR 28.5, 30.1), 24.6 N (IQR 21.9, 27.2), 36.7 N, and 9.6 N (IQR 9.4, 10.0), respectively. Decreasing the distance between the EndoAnchors over the circumference of the endograft increased the displacement resistance. Conclusion: This in vitro study demonstrates the influence EndoAnchor configurations have on the displacement resistance of an aortic endograft. Parts of the endograft where no EndoAnchor has been deployed remain sensitive to migration. In the current model, the only configuration that rivaled a hand-sewn anastomosis was the one with 6 EndoAnchors. A circumferential distribution of EndoAnchors with small distances between EndoAnchors should be pursued, if possible. This study provides a quantification of different EndoAnchor configurations that clinicians may have to adopt in clinical practice, which can help them make a measured decision on where to deploy EndoAnchors to ensure good endograft fixation.


2020 ◽  
Vol 43 (12) ◽  
pp. 758-766 ◽  
Author(s):  
Frédéric Joseph Baud ◽  
Pascal Houzé ◽  
Jean-Herlé Raphalen ◽  
Anaïs Winchenne ◽  
Pascal Philippe ◽  
...  

Introduction: In continuous renal replacement therapy, conduction and convection are controlled allowing prescribing dosage regimen improving survival. In contrast, adsorption is an uncontrolled property altering drug disposition. Whether adsorption depends on flowrates is unknown. We hypothesized an in vitro model may provide information in conditions mimicking continuous renal replacement therapy in humans. Methods: ST150®-AN69 filter and Prismaflex dialyzer, Baxter-Gambro were used. Simulated blood flowrate was set at 200 mL/min. The flowrates in the filtration (continuous filtration), dialysis (continuous dialysis), and diafiltration (continuous diafiltration) were 1500, 2500, and 4000 mL/h, respectively. Routes of elimination were assessed using NeckEpur® analysis. Results: The percentages of the total amount eliminated by continuous filtration, continuous dialysis, and continuous diafiltration were 82%, 86%, and 94%, respectively. Elimination by effluents and adsorption accounted for 42% ± 7% and 58% ± 5%, 57% ± 7% and 43% ± 6%, and 84% ± 6% and 16% ± 6% of amikacin elimination, respectively. There was a linear regression between flowrates and amikacin clearance: Y = 0.6 X ± 1.7 (R2 = 0.9782). Conversely, there was a linear inverse correlation between the magnitude of amikacin adsorption and flowrate: Y = –16.9 X ± 84.1 (R2 = 0.9976). Conclusion: Low flowrates resulted in predominant elimination by adsorption, accounting for 58% of the elimination of amikacin from the central compartment in the continuous filtration mode at 1500 mL/h of flowrate. Thereafter, the greater the flowrate, the lower the adsorption of amikacin in a linear manner. Flowrate is a major determinant of adsorption of amikacin. There was an about 17% decrease in the rate of adsorption per increase in the flowrate of 1 L/min.


2017 ◽  
Vol 2017 ◽  
pp. 1-5
Author(s):  
Hooman Khorshidi ◽  
Saeed Raoofi ◽  
Maryam Najafi ◽  
Mohammad Hassan Kalantari ◽  
Jamshid Khorshidi Malahmadi ◽  
...  

Objectives. Insufficient cortical bone volume when placing implants can lead to lack of primary stability. The use of cement as a bone fill material in bone defects around dental implant could result in better clinical outcome. HA has shown excellent biological properties in implant dentistry. The purpose of this study was to evaluate the effect of nanohydroxyapatite powder (Nano-HA) in combination with accelerated Portland cement (APC) on implant primary stability in surgically created circumferential bone defects in a bovine rib in vitro model. Materials and Methods. Sixteen bovine rib bones and thirty-six implants of same type and size (4 mm × 10 mm) were used. Implants were divided into six groups: no circumferential bone defect, defect and no grafting, bone chips grafting, Nano-HA grafting, APC grafting, and Nano-HA mixed to APC grafting (Nano-HA-APC). Circumferential defects around the implants were prepared. The implant stability quotient (ISQ) values were measured before and after the grafting. Results. APC exhibited the highest ISQ values. A significant increase of ISQ values following the grafting of Nano-HA-APC (18.08±5.82) and APC alone (9.50±4.12) was achieved. Increase of ISQ values after 72 hours was 24.16±5.01 and 17.58±4.89, respectively. Nano-HA grafting alone exhibited the least rise in ISQ values. Conclusions. Nanohydroxyapatite silicate-based cement could improve the primary stability of dental implants in circumferential bone defect around implants.


Sign in / Sign up

Export Citation Format

Share Document