scholarly journals The Influence of Na and Ti on theIn VitroDegradation and Bioactivity in 58S Sol-Gel Bioactive Glass

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Shirong Ni ◽  
Ruilin Du ◽  
Siyu Ni
Keyword(s):  
Activation Energy ◽  
Bioactive Glass ◽  
Body Fluid ◽  
Sol Gel ◽  
Apatite Formation ◽  
Ion Release ◽  
Buffer Solution ◽  
Bioactive Glasses ◽  
Initial Stage

The aim of this study was to investigate the effect of Na and Ti on thein vitrodegradation and bioactivity in the 58S bioactive glass. The degradation was evaluated through the activation energy of Si ion release from bioactive glasses and the weight loss of bioactive glasses in Tris-HCl buffer solution. Thein vitrobioactivity of the bioactive glasses was investigated by analysis of apatite-formation ability in the simulated body fluid (SBF). The results showed that Na in the 58S glass accelerated the dissolution rate of the glass, whereas Ti in the 58S glass slowed down the rate of glass solubility. Bioactivity tests showed that Na in glass increased the apatite-forming ability in SBF. In contrast, Ti in glass retards the apatite formation at the initial stage of SBF soaking but does not affect the growth of apatite after long periods of soaking.

New Composite Membranes Containing Bioactive Glass-Ceramic Nanoparticles and Chitosan for Biomedical Applications

2010 ◽  
Vol 636-637 ◽  
pp. 31-35 ◽  
Author(s):  
Gisela M. Luz ◽  
João F. Mano
Keyword(s):  
Simulated Body Fluid ◽  
Bioactive Glass ◽  
Glass Ceramic ◽  
Body Fluid ◽  
Biomedical Applications ◽  
Sol Gel ◽  
Composite Membranes ◽  
Apatite Formation ◽  
Free System

In this study a new P-free system applied to the production of Bioactive Glass Nanoparticles (BG-NPs) is proposed, in order to evaluate the effect of suppressing this component, in the bioactivity capability of the materials. The BG-NPs, based on both ternary (SiO2-CaO-P2O5) and binary (SiO2-CaO) systems, were prepared via a sol-gel method. The morphology and composition of the BG-NPs were studied using FTIR and SEM. New composite membranes were produced combining chitosan and the BG-NPs. The bioactive character of the prepared biodegradable membranes was accessed in vitro by analyzing the capability for apatite formation onto the surface after being immersed in simulated body fluid (SBF). EDX and SEM were used to confirm the bioactivity of the materials.

scholarly journals Hierarchical Structures and Shaped Particles of Bioactive Glass and ItsIn VitroBioactivity

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
U. Boonyang ◽  
F. Li ◽  
A. Stein
Keyword(s):  
Body Temperature ◽  
Simulated Body Fluid ◽  
Bioactive Glass ◽  
Body Fluid ◽  
Colloidal Crystals ◽  
Hierarchical Structures ◽  
The Other ◽  
Bioactive Glasses ◽  
Ordered Macroporous

In this study, bioactive glass particles with controllable structure and porosity were prepared using dual-templating methods. Block copolymers used as one template component produced mesopores in the calcined samples. Polymer colloidal crystals as the other template component yielded either three-dimensionally ordered macroporous (3DOM) products or shaped bioactive glass nanoparticles. Thein vitrobioactivity of these bioactive glasses was studied by soaking the samples in simulated body fluid (SBF) at body temperature (37°C) for varying lengths of time and monitoring the formation of bone-like apatite on the surface of the bioactive glass. A considerable bioactivity was found that all of bioactive glass samples have the ability to induce the formation of an apatite layer on its surface when in contact with SBF. The development of bone-like apatite is faster for 3DOM bioactive glasses than for nanoparticles.

scholarly journals The Atomic-Scale Interaction of Bioactive Glasses with Simulated Body Fluid

2005 ◽  
Vol 480-481 ◽  
pp. 21-26 ◽  
Author(s):  
L.J. Skipper ◽  
F.E. Sowrey ◽  
D.M. Pickup ◽  
R.J. Newport ◽  
K.O. Drake ◽  
...  
Keyword(s):  
Simulated Body Fluid ◽  
Body Fluid ◽  
Sol Gel ◽  
Atomic Scale ◽  
X Ray Diffraction ◽  
Bioactive Glasses ◽  
Edge Structure ◽  
X Ray ◽  
X Ray Absorption

The formation of a carbonate-containing hydroxyapatite, HCAp, layer on bioactive calcium silicate sol-gel glass of the formula (CaO)0.3(SiO2)0.7 has been studied in-vitro in Simulated Body Fluid (SBF). Extended X-ray Absorption Fine Structure (EXAFS), X-ray Absorption Near Edge Structure (XANES), X-ray diffraction (XRD), and solid state nuclear magnetic resonance (NMR) measurements have been performed with results showing the formation of a significantly amorphous HCAp layer after less than 5 hours in solution.

scholarly journals The Evaluation of Formation and Bioactivity of New Sol-gel Bioactive Glass

2019 ◽  
Vol 35 (1) ◽  
Author(s):  
Bui Xuan Vuong
Keyword(s):  
Bioactive Glass ◽  
Sol Gel ◽  
Glass Ceramics ◽  
Medical Applications ◽  
Crystalline Solids ◽  
Bioactive Glasses ◽  
Central European Journal ◽  
Central European

In this paper, three ceramic compositions 50SiO2-50CaO (A), 45SiO2-45CaO-10P2O5 (B) and 40SiO2-40CaO-20P2O5 (C) (wt %) were synthesized by using the sol-gel technique. XRD analysis demonstrates that only sample C can form the glass material. Treated temperatures and heated times were also evaluated. Analysis data showed that the bioglass 40SiO2-40CaO-20P2O5 (wt %) can successfully elaborate when the ceramic powder heated at 750 oC for 3 hours. ‘‘In vitro’’ experiment was effectuated to investigate the bioactivity of bioglass 40SiO2-40CaO-20P2O5 by soaking powder samples in SBF solution. Obtained result confirmed the formation of hydroxyapatite (HA) phase on glass’s surface after 15 days of immersion, in which HA formation orients following (211) and (222) miller planes in crystalline structure of HA phase. Keywords Sol-gel; bioglass; hydroxyapatite; SBF; bioactivity References [1] D.F. Williams, Definitions in Biomaterials, Consensus Conference for the European Society for Biomaterials, Chester, UK, 1986.[2] L.L. Hench, Bioceramics: From Concept to Clinic, Journal of the American Ceramic Society, 74 (1991) 1487.[3] L.L. Hench, The story of Bioglass, Journal of Materials Science: Materials in Medicine, 17 (2006) 967.[4] X.V. Bui, H. Oudadesse, Y. Le Gal, A. Mostafa, P.Pellen and G. Cathelineau, Chemical Reactivity of Biocomposite Glass-Zoledronate, Journal of the Australian Ceramic Society, 46 (2010) 24.[5] L.L. Hench, Genetic design of bioactive glass, Journal of the European Ceramic Society, 29 (2009) 1257.[6] S. Kumar, P. Vinatier, A. Levasseur, K.J. Rao, Investigations of structure and transport in lithium and silver borophosphate glasses, Journal of Solid State Chemistry, 177 (2004)1723.[7] Z. Hong, A. Liu, L. Chen, X. Chen, X. Jing, Preparation of bioactive glass ceramic nanoparticles by combination of sol–gel and coprecipitation method, Journal of Non-Crystalline Solids, 355 (2009) 368.[8] D.B. Joroch, D.C. Clupper, Modulation of zinc release from bioactive sol–gel derived SiO2‐CaO‐ZnO glasses and ceramics, Journal of Biomedical Materials Research Part A, 82A (2007) 575.[9] J. Roman, S. Padilla, M. Vallet-Regi, Sol−Gel Glasses as Precursors of Bioactive Glass Ceramics, Chemistry of Materials, 15 (2003) 798.[10] J. Lao, J.M. Nedelec, Ph. Moretto, E. Jallot, Biological activity of a SiO2-CaO-P2O5 sol-gel glass highlighted by PIXE-RBS methods, Nuclear Instruments and Methods in Physics Research Section B, 245 (2006) 511.[11] [11] M. Vallet-Regi, L. Ruiz-Gonzalez, I. Izquierdo, J.M. Gonzalez-Calbet, Revisiting silica based ordered mesoporous materials: medical applications, Journal of Materials Chemistry, 16 (2006) 26.[12] W. Xia, J. Chang, Preparation and characterization of nano-bioactive-glasses (NBG) by a quick alkali-mediated sol–gel method, Materials Letters 61 (2007) 3251.[13] R. Li, A.E. Clark, L.L. Hench, An investigation of Bioactive Glass Powders by Sol-Gel Processing, Transactions of 16th Annual Meeting of the Societey for Biomaterials, 12 (1990) 40.[14] J. Lao, J.M. Nedelec, P. Moretto, E. Jallot, Imaging physicochemical reactions occurring at the pore surface in binary bioactive glass foams by micro ion beam analysis, Applied Materials and Interfaces, 6 (2010) 1737.[15] A. Balamurugan, G. Balossier, S. Kannan, J. Michel, A.H.S. Rebelo, J.M.F. Ferreira, Development and in vitro characterization of sol–gel derived CaO–P2O5–SiO2–ZnO bioglas, Acta Biomaterialia, 3 (2007) 255.[16] Z. Hong, A. Liu, L. Chen, X. Chen, X. Jing, Bioactive glass prepared by sol–gel emulsion, Journal of Non-Crystalline Solids, 355 (2009) 368.[17] O. Peital, E.D. Zanotto, L.L. Hench, Highly bioactive P2O5-Na2O-CaO-SiO2 glass-ceramics, Journal of Non-Crystalline Solids, 292 (2001) 115.[18] J. Liu, X. Miao, Sol-gel derived bioglass as a coating material for porous alumina scaffolds, Ceramics International, 30 (2004) 1781.[19] T. Kokubo, H. Takadama, How useful is SBF in predicting in vivo bone bioactivity. Biomaterials 27 (2006) 2907.[20] M. Dziadek, B. Zagrajczuk, P. Jelen, Z. Olejniczak, K.C. Kowalska, Structural variations of bioactive glasses obtained by different synthesis routes, Ceramics International, 42 (2016) 14700.[21] R. Lakshmi, V. Velmurugan and S. Sasikumar, Preparation and Phase Evolution of Wollastonite by Sol-Gel Combustion Method Using Sucrose as the Fuel, Combustion Science and Technology, 185 (2013) 1777.[22] G. Voicu, A. Bădănoiu, E. Andronescu1, C. M. Chifiruc, Synthesis, characterization and bioevaluation of partially stabilized cements for medical applications, Central European Journal of Chemistry, 11 (2013) 1657.[23] M.V. Regi, Ceramics for medical applications, Journal of the Chemical Society, Dalton Transactions, 2 (2001) 97.[24] G. Voicu, A.I. Bădănoiu, E. Andronescu, C.M. Chifiruc, Synthesis, characterization and bioevaluation of partially stabilized cements for medical applications, Central European Journal of Chemistry, 11 (2013) 1657.M. Wu, T. Wang, Y. Wang, F. Li, M. Zhou, X. Wu, A novel and facile route for synthesis of fine tricalcium silicate powders, Materials letters, 227 (2018), 187.

Growth of Hydroxyapatite on Strontium Oxide Modified Bioactive Glass

2015 ◽  
Vol 1107 ◽  
pp. 397-402
Author(s):  
H.J.M. Ridzwan ◽  
N.H. Jamil ◽  
S.A. Syamsyir ◽  
W.A.W. Razali
Keyword(s):  
Simulated Body Fluid ◽  
Bioactive Glass ◽  
Body Fluid ◽  
Sol Gel ◽  
Amorphous State ◽  
Strontium Oxide ◽  
Bioactive Glasses ◽  
Xrd Pattern ◽  
Gel Method ◽  
Sol Gel Method

The bioactive glasses of SiO2-CaO-P2O5-SrO system have been prepared by a quick alkali mediated sol-gel method. The prepared bioactive glass of 1, 3, 5 wt% of SrO (coded: SR1, SR3, SR5, respectively) were characterized by SEM, XRD and FTIR. XRD pattern of all glasses calcined at 700°C in air confirmed that the calcined bioactive glass generally existed in amorphous state. The samples were immersed in simulated body fluid (SBF) to investigate the presence of hydroxyapatite (HA). All bioactive glass samples can induce the formation of hydroxyapatite (HA) as verified by SEM and XRD.

scholarly journals Effect of Cu- and Zn-Doped Bioactive Glasses on the In Vitro Bioactivity, Mechanical and Degradation Behavior of Biodegradable PDLLA Scaffolds

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2908 ◽  
Author(s):  
Julian Bejarano ◽  
Aldo R. Boccaccini ◽  
Cristian Covarrubias ◽  
Humberto Palza
Keyword(s):  
Bioactive Glass ◽  
Bone Repair ◽  
Apatite Formation ◽  
High Porosity ◽  
Degradation Behavior ◽  
Polymer Scaffolds ◽  
Bioactive Glasses ◽  
Salt Leaching ◽  
Compression Properties

Biodegradable polymer scaffolds filled with bioactive glass particles doped with therapeutic metal ions are a novel and promising strategy to repair critical-sized bone defects. In this study, scaffolds based on a poly (D, L-lactide acid) (PDLLA) matrix filled with un-doped and Cu-, Zn- and CuZn-doped bioactive glass particles were produced by freeze-drying and a salt-leaching method. The effects of the doping and content of the glass particles (10 and 30 wt.%) on the morphology, compression properties, apatite formation, and degradation behavior of the scaffolds were evaluated. The scaffolds presented high porosity (~93%) with pores ranged from 100 to 400 μm interconnected by smaller pores and this porosity was kept after the glass particles incorporation. The glass particles reinforced the polymer scaffolds with improvements as high as 130% in elastic moduli, and further promoted the apatite formation on the scaffold surface, both properties depending on the amount and type of filler. The bioactive glass particles boosted the scaffold degradation with the PDLLA/un-doped glass scaffold showing the highest rate, but still retaining structural and dimensional integrity. Our findings show that the incorporation of un-doped and metal-doped bioactive glasses increases the mechanical strength, promotes the bioactivity and modifies the degradation profile of the resulting polymer/glass scaffolds, making them better candidates for bone repair.

scholarly journals Dissolution of Amorphous S53P4 Glass Scaffolds in Dynamic In Vitro Conditions

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4834
Author(s):  
Laura Aalto-Setälä ◽  
Peter Uppstu ◽  
Polina Sinitsyna ◽  
Nina C. Lindfors ◽  
Leena Hupa
Keyword(s):  
Phase Composition ◽  
Simulated Body Fluid ◽  
Bioactive Glass ◽  
Surgical Procedures ◽  
Continuous Flow ◽  
Body Fluid ◽  
Glass Composition ◽  
Ion Release ◽  
High Tendency

The silicate-based bioactive glass S53P4 is clinically used in bone regenerative applications in granule form. However, utilization of the glass in scaffold form has been limited by the high tendency of the glass to crystallize during sintering. Here, careful optimization of sintering parameters enabled the manufacture of porous amorphous S53P4 scaffolds with a strength high enough for surgical procedures in bone applications (5 MPa). Sintering was conducted in a laboratory furnace for times ranging from 25 to 300 min at 630 °C, i.e., narrowly below the commencement of the crystallization. The phase composition of the scaffolds was verified with XRD, and the ion release was tested in vitro and compared with granules in continuous flow of Tris buffer and simulated body fluid (SBF). The amorphous, porous S53P4 scaffolds present the possibility of using the glass composition in a wider range of applications.

In Vitro Bioactivity of Composite of Nanophase Titania/Bioactive Glass-Ceramic in Simulated Body Fluid

2005 ◽  
Vol 288-289 ◽  
pp. 171-174
Author(s):  
Hui Wang ◽  
Bang Cheng Yang ◽  
Qi Feng Yu ◽  
Dayi Wu ◽  
Xing Dong Zhang
Keyword(s):  
Simulated Body Fluid ◽  
Bioactive Glass ◽  
Glass Ceramic ◽  
Body Fluid ◽  
Mechanical Analysis ◽  
Apatite Formation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Biomechanical Compatibility

Titania ceramics is lack of bone-bonding ability even if it has excellent biocompatibility. Recently, it is even found that the nanophase titania ceramics could enhance the proliferation of osteoblasts. If the bone-bonding ability of this material is improved, it would be a potential bone replacement material. Bioactive glass-ceramic (BGC) is provided with the best bioactivity in biomaterials. In this study, the apatite formation ability and the mechanic properties of titania ceramic were investigated by the accession of BGC. Four samples: TiO2 ceramic, TiO2 +10%BGC, TiO2 +20%BGC and BGC were prepared respectively. These ceramics were exposed to a simulated body fluid (SBF) for 7, 14 and 21d. Scanning electron microscopy (SEM), energy dispersive X-ray detector (EDX) and thin film X-ray diffraction (TF-XRD) results showed that the apatite formation of the ceramics was improved by adding BGC into nanophase titania ceramic. The mechanical analysis showed the biomechanical compatibility was also improved by adding BGC into nanophase titania ceramic.

In Vitro Culture of Osteoblasts with Three Dimensionally Ordered Macroporous Sol-Gel Bioactive Glass (3DOM-BG) Particles

2005 ◽  
Vol 284-286 ◽  
pp. 655-658 ◽  
Author(s):  
Kai Zhang ◽  
Newell R. Washburn ◽  
Joseph M. Antonucci ◽  
Carl G. Simon
Keyword(s):  
Body Fluid ◽  
Colloidal Crystal ◽  
Sol Gel ◽  
Molar Fraction ◽  
Bioactive Glasses ◽  
Templating Method ◽  
Sol Gel Process ◽  
Colloidal Crystal Templating ◽  
Ordered Macroporous

Three dimensionally ordered macroporous sol-gel bioactive glasses (3DOM-BGs)are a type of biomaterial that is both bioactive and resorbable. In this study, 80 % SiO2 – 20 % CaO (molar fraction) 3DOM-BG particles were prepared using a colloidal crystal templating method via a sol-gel process. The as-prepared 3DOM-BG particles can quickly convert to a calcium-deficient, bone-like apatite after soaking in a simulated body fluid (SBF). MC3T3-E1 osteoblastic cells were cultured in the presence of 3DOM-BG particles. Preliminary results from cell studies showed that 3DOM-BG particles are not cytotoxic and are compatible with MC3T3-E1 osteoblast-like cells in vitro.

Preparation of Merwinite with Apatite-Forming Ability by Sol-Gel Process

2007 ◽  
Vol 330-332 ◽  
pp. 67-70 ◽  
Author(s):  
Jun Ou ◽  
Guang Fu Yin ◽  
Da Li Zhou ◽  
X. C. Chen ◽  
Ya Dong Yao ◽  
...  
Keyword(s):  
Simulated Body Fluid ◽  
Tissue Repair ◽  
Body Fluid ◽  
Sol Gel ◽  
Apatite Formation ◽  
Potential Candidate ◽  
Hard Tissue ◽  
Sol Gel Process

Merwinite powders were synthesized by a sol-gel process. The bioactivity in vitro of merwinite was investigated by soaking the powders in simulated body fluid (SBF), the growth of hydroxyapatite(HAp) on the surface of the powder was evaluated in various time. It was found that hydroxyapatite was formed after soaking for 14 days. The results indicate that merwinite possessed apatite-formation ability might be a potential candidate biomaterial for hard tissue repair.

Sign in / Sign up

Export Citation Format

Share Document