scholarly journals New Voltage Mode Universal Filters Using Only Two CDBAs

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
J. K. Pathak ◽  
A. K. Singh ◽  
Raj Senani
Keyword(s):  
Quality Factor ◽  
Input Impedance ◽  
Angular Frequency ◽  
Output Impedance ◽  
Active Device ◽  
Voltage Mode ◽  
Low Pass ◽  
Band Pass ◽  
Simulation Results ◽  
High Pass

Two new configurations for voltage mode universal filters (VMUFs) using only two current differencing buffered amplifiers (CDBAs) are proposed. Both of the new configurations can realize all the five standard types of the filters, namely, low pass (LP), high pass (HP), band pass (BP), band stop (BS), and all pass (AP), from the same topology. In contrast to previously known CDBA-based VMUFs, the new configurations do not need an additional active device for voltage inversion to realize all pass functions. The proposed configurations offer the tunability of the natural angular frequency (ωo), quality factor (Q), or the bandwidth (BW) through separate virtually grounded resistors. Moreover, both circuits have resistive input impedance (which can be made high) and a low output impedance to facilitate easy cascading without additional buffers. PSPICE simulation results, based upon commercially available AD844 ICs to implement the CDBA, are included which confirm the practical workability of the new VMUF configurations.

A New CCII Based Voltage-Mode Multifunctional Filter with Reduced Number of Active and Passive Elements

2015 ◽  
Vol 24 (04) ◽  
pp. 1550047 ◽  
Author(s):  
Firat Yucel ◽  
Erkan Yuce
Keyword(s):  
Time Domain ◽  
Input Impedance ◽  
Current Conveyors ◽  
High Input ◽  
High Input Impedance ◽  
Voltage Mode ◽  
Low Pass ◽  
Band Pass ◽  
Simulation Results ◽  
High Pass

In this paper, a new voltage-mode (VM) multifunctional filter comprising two second-generation current conveyors (CCIIs) is proposed. The proposed filter with one input and three outputs is also composed of three resistors and two grounded capacitors. The proposed filter has high input impedance; thus, it can be easily connected with other VM circuits. The proposed filter can simultaneously provide low-pass (LP), band-pass (BP) and high-pass (HP) responses. A number of time domain and frequency domain simulation results are included to confirm the claimed theory.

scholarly journals One input voltage and three output voltage universal biquad filters with orthogonal tune of frequency and bandwidth

2021 ◽  
Vol 11 (4) ◽  
pp. 2962
Author(s):  
May Phu Pwint Wai ◽  
Amornchai Chaichana ◽  
Winai Jaikla ◽  
Surapong Siripongdee ◽  
Peerawut Suwanjan
Keyword(s):  
Output Voltage ◽  
Input Voltage ◽  
Electronic Control ◽  
Active Device ◽  
Voltage Mode ◽  
Biquad Filter ◽  
Low Pass ◽  
Band Pass ◽  
The One ◽  
High Pass

This research paper contributes the one input three output voltage mode universal biquad filters with linear and electronic control of the natural frequency (<em>w<sub>0</sub></em>), using two commercially available ICs, LT1228s as active device with two grounded capacitors, five resistors. The presented universal biquad filters can simultaneously provide three voltage-mode filtering functions, low-pass (LP), high-pass (HP) and band-pass (BP) without changing the circuit architecture. Furthermore, the first presented biquad filter provides low impedance at HP, BP voltage output nodes and LP, BP output voltage nodes are low impedance for the second proposed filter which is easy cascade ability with other voltage mode circuits without the employment of buffer circuits. The quality factor (<em>Q</em>) of both proposed filters is orthogonally adjusted from the passband voltage gain and <em>w<sub>0</sub></em>. The proposed filters are simulated and experimented with commercially accessible ICs, LT1228. The simulated and experimental results demonstrate the filtering performances.

scholarly journals A Multifunctional Voltage Mode Fractional Order Filters using a Single CFOA

2020 ◽  
Vol 9 (4) ◽  
pp. 687-691
Keyword(s):  
Fractional Order ◽  
Matlab Simulation ◽  
Current Feedback ◽  
Voltage Mode ◽  
Filter Structure ◽  
Low Pass ◽  
Band Pass ◽  
Simulation Results ◽  
Current Feedback Operational Amplifier ◽  
High Pass

A multifunction voltage mode fractional order filter structure is described using a single current feedback operational amplifier (CFOA). This configuration realizes three fractional order filters (FOFs) namely fractional order low pass (FOLP), fractional order band pass (FOBP) and fractional order high pass (FOHP) filters. The performance of the proposed structure has been verified through PSPICE and MATLAB simulation results using macro model of AD844 type CFOA.

NOVEL VOLTAGE-MODE UNIVERSAL FILTER USING ONLY TWO CDBAs

2005 ◽  
Vol 14 (01) ◽  
pp. 159-164 ◽  
Author(s):  
SUDHANSHU MAHESHWARI ◽  
IQBAL A. KHAN
Keyword(s):  
Pass Band ◽  
Universal Filter ◽  
Input Selection ◽  
Voltage Mode ◽  
Single Output ◽  
Control Computer ◽  
Low Pass ◽  
Band Pass ◽  
Pass Through ◽  
High Pass

A novel voltage-mode universal filter employing only two current differencing buffered amplifiers (CDBAs) is proposed. The filter uses four inputs and single output to realize six responses, viz. low-pass, high-pass, inverting band-pass, noninverting band-pass, band-elimination, and all-pass through input selection with independent pole-Q control. Computer simulation results using SPICE are also given to verify the theory.

scholarly journals Transadmittance Type Universal Current-Mode Biquad Filter Using VDTAs

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Dinesh Prasad ◽  
Mayank Srivastava ◽  
D. R. Bhaskar
Keyword(s):  
Process Parameters ◽  
Current Mode ◽  
Angular Frequency ◽  
Pspice Simulations ◽  
Biquad Filter ◽  
Low Pass ◽  
Single Input ◽  
Band Pass ◽  
Transconductance Amplifiers ◽  
High Pass

A new resistorless single-input-multi-output (SIMO) universal transadmittance (TA) type filter employing two voltage differencing transconductance amplifiers (VDTA) and two grounded capacitors is proposed. The proposed topology realizes simultaneously low pass (LP), high pass (HP), and band pass (BP) filter functions. Band rejects (BR) and all pass (AP) filters are also realizable through appropriate connections of currents. The proposed configuration also offers independent control of natural angular frequency (ω0) and bandwidth (BW) and low active and passive sensitivities. The workability of proposed configuration has been demonstrated through PSPICE simulations with TSMC CMOS 0.18 μm process parameters.

Second-Order Voltage-Mode Universal Filters Using Two DVCCs, Two Grounded Capacitors and Four Resistors

2016 ◽  
Vol 25 (12) ◽  
pp. 1650154 ◽  
Author(s):  
Ahmet Abaci ◽  
Erkan Yuce
Keyword(s):  
Integrated Circuit ◽  
Matching Condition ◽  
Second Order ◽  
Point Of View ◽  
Pass Band ◽  
Current Conveyors ◽  
Voltage Mode ◽  
Low Pass ◽  
Band Pass ◽  
High Pass

In this paper, two new second-order voltage-mode universal filters are proposed. Both of the proposed filters use only two differential voltage current conveyors (DVCCs), four resistors and two grounded capacitors which are advantageous from integrated circuit technology point of view. They can simultaneously provide second-order low-pass, high-pass, band-pass, notch and all-pass responses. They offer orthogonal control of angular resonance frequency and quality factor. However, they have a single matching condition for only all-pass responses. A number of simulations based on SPICE program are accomplished in order to demonstrate the performance of both filters.

A NEW ELECTRONICALLY-TUNABLE ACTIVE-ONLY UNIVERSAL BIQUAD

2011 ◽  
Vol 20 (03) ◽  
pp. 549-555 ◽  
Author(s):  
A. K. SINGH ◽  
R. SENANI ◽  
D. R. BHASKAR ◽  
R. K. SHARMA
Keyword(s):  
Pass Band ◽  
Voltage Mode ◽  
Op Amp ◽  
Op Amps ◽  
Reasonable Number ◽  
Low Pass ◽  
Band Pass ◽  
Electronically Tunable ◽  
High Pass ◽  
Realization Condition

A number of configurations for realizing voltage-mode (VM) biquads using op-amps and OTAs have been presented in the literature, however, none of these provide the following desirable properties simultaneously: (i) realizability of all the five standard filters (namely; low pass, high pass, band pass, band stop and all pass), (ii) tunability of all the three filter parameters (namely; ω0, bandwidth or Q0 and gain) and (iii) not requiring any realization condition in any of the five filter responses. This paper presents a new configuration which does possess all the above mentioned desirable properties simultaneously while using only two internally-compensated type op-amps and a reasonable number of OTAs. The workability of the new configuration has been demonstrated by SPICE simulations based upon CMOS Op-amp and CMOS OTAs.

MIXED MODE UNIVERSAL FILTER

2013 ◽  
Vol 22 (01) ◽  
pp. 1250064 ◽  
Author(s):  
NEETA PANDEY ◽  
SAJAL K. PAUL
Keyword(s):  
Mixed Mode ◽  
Cmos Technology ◽  
Output Impedance ◽  
Universal Filter ◽  
Output Current ◽  
Voltage Signal ◽  
Low Pass ◽  
Band Pass ◽  
Electronically Tunable ◽  
High Pass

The configuration with electronic tunable characteristics that can work in mixed mode may be useful from IC realization viewpoint and application adaptability. This paper proposes an electronically tunable mixed mode universal filter based on multiple output current controlled current conveyor (MOCCCII) and this single topology without any alteration can be used in all four modes i.e., voltage (VM), current (CM), transimpedance (TIM) and transadmittance (TAM). The architecture uses four MOCCCIIs and two grounded capacitors; and can realize universal filter functions — low pass (LP), band pass (BP), high pass (HP), notch (NF) and all pass (AP) for all four modes. Moreover the input impedance is high and output impedance is low for voltage signal and vice-versa for current signal, hence the proposed topology is suitable for cascading for all four modes. The workability of the proposed circuit has been verified via SPICE simulations using AMS 0.35 μm CMOS technology.

Voltage-Mode Multifunctional Biquadratic Filter Using VDDDA

2015 ◽  
Vol 781 ◽  
pp. 155-159 ◽  
Author(s):  
Suriya Soisang ◽  
Kamon Jirasereemomkul ◽  
Winai Jaikla ◽  
Kohji Higuchi
Keyword(s):  
Quality Factors ◽  
Active Device ◽  
Voltage Mode ◽  
Input Multiple Output ◽  
Low Pass ◽  
Single Structure ◽  
Biquadratic Filter ◽  
Single Input ◽  
Band Pass ◽  
Good Agreement

This paper presents a new voltage-mode single-input multiple-output multifunctional biquadratic filter using voltage differencing differential difference amplifiers (VDDDA) with high-input impedance. It consists of two VDDDA, two resistors, and two grounded capacitors. It can synthesize basic filter functions: high-past (HP), low-pass (LP) and band-pass (BP), responding through only single structure. The natural frequency can obtain by adjusting bias currents of VDDDA without disturbing quality factors. Because of using VDDDA as an active device in the circuit, the power consumption was low. The simulation using PSPICE program indicated that circuit operation has good agreement with the theory.

CDTAs Based Current-Mode Universal Biquad Filters with Orthogonal Control of Quality Factor and Pole Frequency

2013 ◽  
Vol 787 ◽  
pp. 501-507
Author(s):  
Saksit Summart ◽  
Chanchai Thongsopa
Keyword(s):  
Quality Factor ◽  
Integrated Circuit ◽  
Current Mode ◽  
Pass Band ◽  
Cascade Connection ◽  
Low Pass ◽  
Band Pass ◽  
High Output Impedance ◽  
Further Development ◽  
High Pass

This article presents current-mode universal biquad filters based on CDTAs. The filter circuits using four CDTAs and two grounded capacitors which are able to provide low-pass, high-pass, band-pass, band-reject and all-pass functions. The pole frequency can be orthogonally controlled from quality factor and the circuits have high output impedance appropriate for cascade connection application in current mode which is capable to directly drive load. This qualification is very appropriate for further development into an integrated circuit. The results of PSPICE simulation program are corresponding to the theoretical analysis.

Sign in / Sign up

Export Citation Format

Share Document