scholarly journals Simultaneous Adsorption of Cr(VI) and Phenol from Binary Mixture Using Iron Incorporated Rice Husk: Insight to Multicomponent Equilibrium Isotherm

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Ankur Gupta ◽  
Chandrajit Balomajumder
Keyword(s):  
Experimental Data ◽  
Rice Husk ◽  
Low Cost ◽  
Binary Solution ◽  
Multicomponent System ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Adsorption Isotherm Models ◽  
Pseudo Second Order

Fe modified rice husk was prepared as a low cost biosorbent for the removal of Cr(VI) and phenol both singly and in combination from single and binary simulated synthetic waste water. Rice husk was modified by treating with FeSO4·7H2O. The results showed that impregnation of iron onto the surface of rice husk improved the adsorption capability of both Cr(VI) and phenol. The effects of process parameters for multicomponent system such as pH, adsorbent dose, and contact time onto the percentage removal of both Cr(VI) and phenol were investigated. The experimental data for the adsorption of both Cr(VI) and phenol onto the surface of Fe modified rice husk applied to various kinetic and adsorption isotherm models. Multicomponent isotherm models such as Nonmodified Langmuir, Modified Langmuir, Extended Langmuir, Extended Freundlich, Competitive Nonmodified Redlich Peterson, Competitive Modified Redlich Peterson were applied. The results show that Extended Freundlich model best described the experimental data for both Cr(VI) and phenol from binary solution. Pseudo second-order model agreed well with Cr(VI) while pseudo first-order model agreed well with phenol. Maximum adsorption capacity in synthetic binary solution of Cr(VI) and phenol was found to be 36.3817 mg g−1for Cr(VI) and 6.569 mg g−1for phenol, respectively.

scholarly journals Adsorption Characteristics of Phosphate Ions by Pristine, CaCl2 and FeCl3-Activated Biochars Originated from Tangerine Peels

Separations ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 32 ◽  
Author(s):  
Changgil Son ◽  
Wonyeol An ◽  
Geonhee Lee ◽  
Inho Jeong ◽  
Yong-Gu Lee ◽  
...  
Keyword(s):  
Adsorption Kinetics ◽  
Chemical Activation ◽  
Isotherm Models ◽  
Order Model ◽  
Phosphate Ions ◽  
Adsorption Capacities ◽  
Adsorption Isotherm Models ◽  
Endothermic Reactions ◽  
Pseudo Second Order ◽  
Adsorption Kinetics And Isotherm

This study has evaluated the removal efficiencies of phosphate ions (PO43−) using pristine (TB) and chemical-activated tangerine peel biochars. The adsorption kinetics and isotherm presented that the enhanced physicochemical properties of TB surface through the chemical activation with CaCl2 (CTB) and FeCl3 (FTB) were helpful in the adsorption capacities of PO43− (equilibrium adsorption capacity: FTB (1.655 mg g−1) > CTB (0.354 mg g−1) > TB (0.104 mg g−1)). The adsorption kinetics results revealed that PO43− removal by TB, CTB, and FTB was well fitted with the pseudo-second-order model (R2 = 0.999) than the pseudo-first-order model (R2 ≥ 0.929). The adsorption isotherm models showed that the Freundlich equation was suitable for PO43− removal by TB (R2 = 0.975) and CTB (R2 = 0.955). In contrast, the Langmuir equation was proper for PO43− removal by FTB (R2 = 0.987). The PO43− removal efficiency of CTB and FTB decreased with the ionic strength increased due to the compression of the electrical double layer on the CTB and FTB surfaces. Besides, the PO43− adsorptions by TB, CTB, and FTB were spontaneous endothermic reactions. These findings demonstrated FTB was the most promising method for removing PO43− in waters.

Preparation of bio-based magnetic adsorbent and application for efficient removal of Cd(II) from water

2018 ◽  
Vol 77 (5) ◽  
pp. 1313-1323 ◽  
Author(s):  
Jianjun Zhou ◽  
Xionghui Ji ◽  
Xiaohui Zhou ◽  
Jialin Ren ◽  
Yaochi Liu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
Magnetic Adsorbent ◽  
Order Model ◽  
Efficient Removal ◽  
Adsorption Ability ◽  
Adsorption Sites ◽  
Pseudo Second Order

Abstract A novel magnetic bio-adsorbent (MCIA) was developed, characterized and tested for its Cd(II) removal from aqueous solution. MCIA could be easily separated from the solution after equilibrium adsorption due to its super-paramagnetic property. The functional and magnetic bio-material was an attractive adsorbent for the removal of Cd(II) from aqueous solution owing to the abundant adsorption sites, amino-group and oxygen-containing groups on the surface of Cyclosorus interruptus. The experimental results indicated that the MCIA exhibited excellent adsorption ability and the adsorption process was spontaneous and endothermic. The adsorption isotherm was consistent with the Langmuir model. The adsorption kinetic fitted the pseudo-second-order model very well. The maximum adsorption capacity of Cd(II) onto MCIA was 40.8, 49.4, 54.6 and 56.6 mg/g at 293, 303, 313 and 323 K, respectively. And the MCIA exhibited an excellent reusability and impressive regeneration. Therefore, MCIA could serve as a sustainable, efficient and low-cost magnetic adsorbent for Cd(II) removal from aqueous solution.

scholarly journals Biosorption potentials of acid modified Saccharum bengalense for removal of methyl violet from aqueous solutions

2017 ◽  
Vol 23 (3) ◽  
pp. 399-409 ◽  
Author(s):  
Muhammad Din ◽  
Kiran Ijaz ◽  
Khalida Naseem
Keyword(s):  
Experimental Data ◽  
Adsorption Isotherm ◽  
Aqueous Medium ◽  
Methyl Violet ◽  
Isotherm Models ◽  
Langmuir Adsorption ◽  
First Order ◽  
Adsorption Isotherm Models ◽  
Intra Particle Diffusion ◽  
Pseudo Second Order

In the present work, Saccharum bengalense (SB) was treated with sulfuric acid to enhance its efficiency. Methyl violet (MV), a cationic dye, was removed from aqueous medium using acid modified S. bengalense (A-SB). Different parameters like adsorbent dosage, stirring speed, temperature, contact time and effect of initial concentration of dye on rate of adsorption of dye from aqueous medium was studied. Experimental data obtained from adsorption of MV was analyzed by applying pseudo first order, pseudo second order and intra-particle diffusion models and it was found that the data best follows the pseudosecond order kinetics. Thermodynamic parameters indicate that adsorption reaction was spontaneous, feasible and endothermic in nature. Different adsorption isotherm models, like Langmuir, Freundlich, Dubinin-Radushkevich (D-R) and Temkin, were used to study the mechanism of adsorption process and experimental data was well fitted by the Langmuir adsorption isotherm.

scholarly journals Highly Effective Covalently Crosslinked Composite Alginate Cryogels for Cationic Dye Removal

Gels ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 178
Author(s):  
Serap Sezen ◽  
Vijay Kumar Thakur ◽  
Mehmet Murat Ozmen
Keyword(s):  
Adsorption Capacity ◽  
Dye Removal ◽  
Low Cost ◽  
Dye Adsorption ◽  
Maximum Adsorption Capacity ◽  
High Porosity ◽  
Order Model ◽  
Removal Capacity ◽  
Pseudo Second Order ◽  
The One

Currently, macroporous hydrogels have been receiving attention in wastewater treatment due to their unique structures. As a natural polymer, alginate is used to remove cationic dyes due to its sustainable features such as abundance, low cost, processability, and being environmentally friendly. Herein, alginate/montmorillonite composite macroporous hydrogels (cryogels) with high porosity, mechanical elasticity, and high adsorption yield for methylene blue (MB) were generated by the one-step cryogelation technique. These cryogels were synthesized by adding montmorillonite into gel precursor, followed by chemical cross-linking employing carbodiimide chemistry in a frozen state. The as-prepared adsorbents were analyzed by FT-IR, SEM, gel fraction, swelling, uniaxial compression, and MB adsorption tests. The results indicated that alginate/montmorillonite cryogels exhibited high gelation yield (up to 80%), colossal water uptake capacity, elasticity, and effective dye adsorption capacity (93.7%). Maximum adsorption capacity against MB was 559.94 mg g−1 by linear regression of Langmuir model onto experimental data. The Pseudo-Second-Order model was fitted better onto kinetic data compared to the Pseudo-First-Order model. Improved porosity and mechanical elasticity yielding enhanced dye removal capacity make them highly potential alternative adsorbents compared to available alginate/montmorillonite materials for MB removal.

Adsorption of the Blue Dye Reactive Remazol RN in Cellulosic Materials

2014 ◽  
Vol 775-776 ◽  
pp. 749-754
Author(s):  
Mirna Sales Loiola Rosa ◽  
Marcos Pereira Silva ◽  
Alan Icaro Morais ◽  
Maria Rita de Morais Chaves Santos ◽  
Edson Cavalcanti Silva Filho ◽  
...  
Keyword(s):  
Low Cost ◽  
Langmuir Model ◽  
Blue Dye ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Textile Waste ◽  
Pseudo Second Order ◽  
Filter Papers ◽  
Best Fit ◽  
The Ideal

The disposal of textile waste in water bodies is exacerbating environmental problems, which led scientists to seek natural materials to develop more sustainable ways. Searching for low cost materials was used to remove the dye in two cellulosic sources (filter papers of different brands). The papers were characterized by XRD which confirmed crystallographic profile similar to cellulose. With the aim of optimizing the best conditions, various tests were performed, where the ideal time was 180 minutes for the paper 1 and 240 minutes for the second paper, both by adjusting the pseudo second-order model. The other parameters studied was the pH, adsorbate-adsorbent systems which have maximum adsorption capacity of 2.76 mg / g at pH 2.02 and 2 mg / g at pH 11 for the paper 1 and 10.57 mg / g pH 4 and 2 mg / g at pH 11 for the paper 2. Both adsorbents had the best fit to the Langmuir model in pHs 2 and 11 at the temperature of 298 K.

Rice Husk Active Carbon as a Potential Low-Cost Adsorbent for TNT Wastewater

2011 ◽  
Vol 356-360 ◽  
pp. 1289-1292
Author(s):  
Dan Fu ◽  
Yi He Zhang ◽  
He Li Wang ◽  
Feng Zhu Lv
Keyword(s):  
Rice Husk ◽  
Active Carbon ◽  
Low Cost ◽  
Adsorption Properties ◽  
Second Order ◽  
Order Model ◽  
First Order ◽  
Pseudo Second Order ◽  
Pseudo First Order ◽  
And Diffusion

In this paper, the adsorption properties of TNT on Rice husk active carbon (RHAC) were investigated. The effects of contact time was examined. Kinetic data obtained at different concentrations were conducted using Lagergren’s pseudo first-order, pseudo second-order and diffusion models. The regression results showed that the adsorption kinetics was more accurately represented by pseudo second-order model. The study indicates that there is significant potential for RHAC as an adsorbent material for TNT removal from wastewater.

scholarly journals Design and Evaluation of a New Natural Multi-Layered Biopolymeric Adsorbent System-Based Chitosan/Cellulosic Nonwoven Material for the Biosorption of Industrial Textile Effluents

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 322
Author(s):  
Yassine EL-Ghoul ◽  
Chiraz Ammar ◽  
Fahad M. Alminderej ◽  
Md. Shafiquzzaman
Keyword(s):  
Low Cost ◽  
Nonwoven Material ◽  
Isotherm Models ◽  
Good Efficiency ◽  
Modified Chitosan ◽  
Reactive Red 198 ◽  
Adsorption Isotherm Models ◽  
Dta Analysis ◽  
Pseudo Second Order ◽  
Temperature Time

The adsorption phenomenon using low-cost adsorbents that are abundant in nature is of great interest when the adsorbed capacity is significant. A newly designed natural polyelectrolyte multi-layered (PEM) biopolymeric system-based chitosan/modified chitosan polymer and functionalized cellulosic nonwoven material was prepared and used as an effective adsorbent for Reactive Red 198 (RR198) dye solutions. The bio-sorbent was characterized by FTIR, SEM, and thermal (TGA/DTA) analysis. The swelling behavior was also evaluated, showing the great increase of the hydrophilicity of the prepared adsorbent biopolymer. The effect of various process parameters on the performance of RR198 dye removal such as pH, contact time, temperature, and initial dye concentration was studied. The biopolymeric system has shown good efficiency of adsorption compared to other adsorbents based on chitosan polymer. The highest adsorption capacity was found to be 722.3 mgg−1 at pH = 4 (ambient temperature, time = 120 min and dye concentration = 600 mg L−1). The adsorption process fitted well to both pseudo-second-order kinetics and Freundlich/Temkin adsorption isotherm models. Regarding its low cost, easy preparation, and promising efficient adsorption results, this new concepted multi-layered bio-sorbent could be an effective solution for the treatment of industrial wastewater.

scholarly journals Kinetics, Isotherms and Thermodynamic Studies on Removal of Divalent Copper using Mallet Flower Leaf Powder as Bio-Adsorbent

2021 ◽  
Vol 18 (24) ◽  
pp. 1431
Author(s):  
Devarapalli Venkata Padma ◽  
Susarla Venkata Ananta Rama Sastry
Keyword(s):  
Experimental Data ◽  
Atomic Absorption ◽  
Kinetic Data ◽  
Maximum Adsorption Capacity ◽  
Divalent Copper ◽  
Order Model ◽  
Leaf Powder ◽  
Pseudo Second Order ◽  
Best Fit ◽  
Agitation Time

The effectiveness and efficacy of Mallet Flower Leaf Powder (MFLP) as a bio-sorbent for the removal of heavy metal copper ions from the aqueous solutions have been studied. Experiments were conducted varying the pH, agitation time, temperature, biosorbent size and dosage as parameters. Speed of the mixing is kept at 200 rpm. The analysis of copper was done by using Atomic Absorption Spectrophotometer (AAS). The adsorption of copper was found to be dependent on pH and a maximum removal of 98.78 % was obtained at an optimum pH of 6.0. The optimum biosorbent dosage was 1 g for an agitation time of 40 min. The biosorption data obtained were validated for the best isotherm. The data collected were verified with the available adsorption isotherms. Experimental data obtained was well represented by Langmuir (RL = 0.161, qm = 5.96 mg/g, R2 = 0.9142), Freundlich (n = 0.64, Kf  = 0.79L/g, R2 = 0.9995) and Tempkin (R2 = 0.9083, bT = 267.63) isotherms, indicating favorable biosorption. The experimental data obtained were tested for the best fit and the Freundlich Model has yielded the best correlation with the highest regression coefficient, R2 = 0.9844. Kinetic data has also been presented using thermodynamic analysis and the pseudo second order model was found to be the best fit with a correlation coefficient of 0.999. For the removal of copper from the solution, bioadsorbent showed a maximum adsorption capacity of 5.96 mg/g. HIGHLIGHTS Removal of divalent copper from the aqueous solution using Mallet Flower Leaf powder Atomic Absorption Spectroscopy, Scanning Electron Microscopy and Fourier transform infrared analysis were used to characterize the Mallet Flower Leaf Powder Kinetic data has been presented using thermodynamic analysis and the pseudo second order model was found to be the best fit with a correlation coefficient of 0.999 The maximum adsorption capacity of MFLP for copper was found to be 5.96 mg/gm GRAPHICAL ABSTRACT

scholarly journals Removal of acridine orange dye from aqueous solution by adsorption onto dried sugar beet pulp

2017 ◽  
pp. 307-314
Author(s):  
Vesna Vucurovic ◽  
Vladimir Puskas ◽  
Uros Miljic
Keyword(s):  
Sugar Beet ◽  
Acridine Orange ◽  
Low Cost ◽  
Sugar Beet Pulp ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Equilibrium Data ◽  
Beet Pulp ◽  
Pseudo Second Order

A simple, low cost, and effective method for the removal of acridine orange (AO), a mutagenic cationic dye, from aqueous model solutions by adsorption onto dried sugar beet pulp (SBP) was evaluated in the present study. The AO removal was enhanced along with the increase of the initial solution pH and dye concentration. It was found that the adsorption process closely follows a pseudo-second-order chemisorption kinetics. The obtained equilibrium data obey both the Freundlich and Langmuir isotherm models. The SBP was proved to be very promising adsorbent for AO removal. Maximum adsorption capacity of the Langmuir monolayer of SBP for AO was found to be 5.37, 34.6, 89.62, 144.53 and 324.58 mg/g, at 25?C for the solution pH of 2, 4, 5, 6, and 8, respectively.

scholarly journals Adsorptive removal of pentachlorophenol from aqueous solutions using powdered eggshell

2017 ◽  
Vol 43 (3) ◽  
pp. 10-16 ◽  
Author(s):  
Krzysztof Kuśmierek ◽  
Paulina Idźkiewicz ◽  
Andrzej Świątkowski ◽  
Lidia Dąbek
Keyword(s):  
Aqueous Solutions ◽  
Low Cost ◽  
Second Order ◽  
Isotherm Models ◽  
Order Model ◽  
Diffusion Kinetic ◽  
Monolayer Adsorption ◽  
Equilibrium Data ◽  
Intra Particle Diffusion ◽  
Pseudo Second Order

AbstractThe usefulness of untreated powdered eggshell as low-cost adsorbent for the removal of pentachlorophenol (PCP) from aqueous solutions was investigated. The most important parameters affecting the adsorption process, including the pH and ionic strength, were examined. The adsorption characteristics of PCP onto eggshell were evaluated in terms of kinetic and equilibrium parameters. The kinetic data were studied in terms of the pseudo-first order, pseudo-second order and intra-particle diffusion kinetic models. The equilibrium data were analyzed using the Langmuir, Freundlich, Sips and Redlich-Peterson isotherm models. The pseudo-second order model best described the adsorption kinetics. Using the Langmuir equation, the monolayer adsorption capacity of eggshell for PCP was found to be 0.127 mg/g. The results showed that PCP can be effectively removed from aqueous solution employing eggshell as a cheap adsorbent.

Sign in / Sign up

Export Citation Format

Share Document