scholarly journals Thermal Stability of Cryomilled Al-Mg-Er Powders

2017 ◽  
Vol 2017 ◽  
pp. 1-17
Author(s):  
Bamidele Akinrinlola ◽  
Raynald Gauvin ◽  
Carl Blais ◽  
Mathieu Brochu
Keyword(s):  
Thermal Stability ◽  
Grain Size ◽  
Second Phase ◽  
Scanning Calorimetry ◽  
Abnormal Growth ◽  
Average Grain Size ◽  
Electron Microscopy Analysis ◽  
Impurity Drag ◽  
Grain Boundary Motion ◽  
Thermal Stability Of

In this study, the thermal stability of nanostructured Al-Mg alloy powders was investigated. Two alloy compositions, Al-5Mg-0.1Er and Al-5Mg-0.5Er (wt.%), were cryogenically milled for 30 h to produce nanostructured powders. The microstructure of the milled powders with increasing temperature was investigated by differential scanning calorimetry (DSC) with one-hour annealing performed at selected temperatures followed by X-ray diffraction (XRD) and electron microscopy analysis. Prolonged milling led to significant oxygen pick-up in the powders. The Al-5Mg-0.1Er powders experienced grain growth typical of cryomilled Al-Mg powders, while the Al-5Mg-0.5Er alloy showed improved thermal stability. An average grain size of ~20 nm was observed up to 400°C (~0.8Tm) in the Al-5Mg-0.5Er powders, and abnormal growth at 550°C resulted in a maximum observed grain size of 234 nm. Thermal stability in the Al-Mg-Er powders is attributed to the combined effects of solute/impurity drag and second-phase pinning (nanoscale oxides, nitrides, and oxynitrides) that impede grain boundary motion.

Grain Growth in Nanocrystalline Nickel

1999 ◽  
Vol 580 ◽  
Author(s):  
G.D. Hibbard ◽  
U. Erb ◽  
K.T. Aust ◽  
G. Palumbo
Keyword(s):  
Thermal Stability ◽  
Grain Size ◽  
Grain Growth ◽  
Size Distributions ◽  
Nanocrystalline Nickel ◽  
Scanning Calorimetry ◽  
Solute Content ◽  
Grain Size Distributions ◽  
Thermal Stability Of ◽  
Total Solute Content

AbstractIn this study, the effect of grain size distribution on the thermal stability of electrodeposited nanocrystalline nickel was investigated by pre-annealing material such that a limited amount of abnormal grain growth was introduced. This work was done in an effort to understand the previously reported, unexpected effect, of increasing thermal stability with decreasing grain size seen in some nanocrystalline systems. Pre-annealing produced a range of grain size distributions in materials with relatively unchanged crystallographic texture and total solute content. Subsequent thermal analysis of the pre-annealed samples by differential scanning calorimetry showed that the activation energy of further grain growth was unchanged from the as-deposited nanocrystalline nickel.

Thermal Stability of Ultrafine-Grained Pure Titanium Processed by High-Pressure Torsion

2021 ◽  
Vol 1016 ◽  
pp. 338-344
Author(s):  
Wan Ji Chen ◽  
Jie Xu ◽  
De Tong Liu ◽  
De Bin Shan ◽  
Bin Guo ◽  
...  
Keyword(s):  
Activation Energy ◽  
Thermal Stability ◽  
Grain Size ◽  
High Pressure ◽  
Annealing Temperature ◽  
High Pressure Torsion ◽  
Stored Energy ◽  
Ultrafine Grained ◽  
Average Grain Size ◽  
Thermal Stability Of

High-pressure torsion (HPT) was conducted under 6.0 GPa on commercial purity titanium up to 10 turns. An ultrafine-grained (UFG) pure Ti with an average grain size of ~96 nm was obtained. The thermal properties of these samples were studied by using differential scanning calorimeter (DSC) which allowed the quantitative determination of the evolution of stored energy, the recrystallization temperatures, the activation energy involved in the recrystallization of the material and the evolution of the recrystallized fraction with temperature. The results show that the stored energy increases, beyond which the stored energy seems to level off to a saturated value with increase of HPT up to 5 turns. An average activation energy of about 101 kJ/mol for the recrystallization of 5 turns samples was determined. Also, the thermal stability of the grains of the 5 turns samples with subsequent heat treatments were investigated by microstructural analysis and Vickers microhardness measurements. It is shown that the average grain size remains below 246 nm when the annealing temperature is below 500 °C, and the size of the grains increases significantly for samples at the annealing temperature of 600 °C.

Thermal Stability of Nanocrystallized Surface Layer in Al-Zn-Mg Alloy by Surface Mechanical Attrition Treatment

2007 ◽  
Vol 546-549 ◽  
pp. 1129-1134 ◽  
Author(s):  
Jin Fang Ma ◽  
Lan Qing Hu ◽  
Xu Guang Liu ◽  
Bing She Xu
Keyword(s):  
Thermal Stability ◽  
Grain Size ◽  
Surface Layer ◽  
Boundary Migration ◽  
Mg Alloy ◽  
Surface Mechanical Attrition Treatment ◽  
Mechanical Attrition ◽  
Nanostructured Layer ◽  
Average Grain Size ◽  
Thermal Stability Of

After surface mechanical attrition treatment (SMAT) for Al-Zn-Mg alloy, a gradient structure with average grain size increased from 20nm in surface layer to about 100nm at a depth of 20μm was formed. The thermal stability of surface nanostructured layer in Al-Zn-Mg alloy samples was investigated by vacuum annealing at 100°C, 150°C, 200°C and 250°C for 1h, respectively. The microstructural evolution as well as the microhardness along the depth from top surface layer to matrix of SMATed samples was analyzed. Experimental results showed that the grain size of surface nanocrystallites remains in submicro-scale, ranging from 300nm to 400nm, when annealed at a temperature of 250°C, and the microhardness of surface nanostructured layer was still high compared with that of matrix, indicating satisfying thermal stability of nanocrystallized layer. This might be attributed to the presence of substantive trident grain boundaries and pinning effect of dispersive precipitated phases in nanocrystalline materials, which hindered the grain boundary migration that leading to grain growth.

Effect of In-Situ Formation of Nanoscale γ-Al2O3 and AlN on Thermal Stability of Cryomilled Nanocrystalline Fe

1995 ◽  
Vol 400 ◽  
Author(s):  
R.J. Perez ◽  
B. Huang ◽  
E.J. Lavernia
Keyword(s):  
Heat Treatment ◽  
Thermal Stability ◽  
Grain Size ◽  
Subsequent Heat Treatment ◽  
Nanometer Scale ◽  
Average Grain Size ◽  
Attritor Milling ◽  
In Situ Formation ◽  
Thermal Stability Of

AbstractCryogenic attritor milling (cryomilling) is used to synthesize nanocrystalline Fe-10wt.%Al powders. Following consolidation in a rigid die at 823 K and heat treatment for 1 hour at 1223 K, an average grain size of 16±7 nm is maintained. This level of thermal stability is shown to exceed that of pure Fe processed under identical conditions. The significant increase in thermal stability is attributed primarily to the presence of nanometer-scale γ-Al2O3 and AIN dispersoids formed during cryomilling and subsequent heat treatment.

Thermal Stability of N-Heterocycle-Stabilized Iodanes – A Systematic Investigation

2019 ◽  
Author(s):  
Andreas Boelke ◽  
Yulia A. Vlasenko ◽  
Mekhman S. Yusubov ◽  
Boris Nachtsheim ◽  
Pavel Postnikov
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Thermogravimetric Analysis ◽  
Systematic Investigation ◽  
Scanning Calorimetry ◽  
Thermal Stability Of

<p>The thermal stability of pseudocyclic and cyclic <i>N</i>-heterocycle-stabilized (hydroxy)aryl- and mesityl(aryl)-l<sup>3</sup>-iodanes (NHIs) through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) is investigated. NHIs bearing <i>N</i>-heterocycles with a high N/C-ratio such as triazoles show among the lowest descomposition temperatures and the highest decomposition energies. A comparison of NHIs with known (pseudo)cyclic benziodoxolones is made and we further correlated their thermal stability with reactivity in a model oxygenation. </p>

scholarly journals Isothermal Vulcanization and Non-Isothermal Degradation Kinetics of XNBR/Epoxy/XNBR-g-Halloysite Nanotubes (HNT) Nanocomposites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2872
Author(s):  
Seyed Mohamad Reza Paran ◽  
Ghasem Naderi ◽  
Elnaz Movahedifar ◽  
Maryam Jouyandeh ◽  
Krzysztof Formela ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Degradation Kinetics ◽  
Halloysite Nanotubes ◽  
Butadiene Rubber ◽  
Order Model ◽  
Scanning Calorimetry ◽  
Theoretical Methods ◽  
Vulcanization Kinetics ◽  
Kinetics Of ◽  
Thermal Stability Of

The effect of several concentrations of carboxylated nitrile butadiene rubber (XNBR) functionalized halloysite nanotubes (XHNTs) on the vulcanization and degradation kinetics of XNBR/epoxy compounds were evaluated using experimental and theoretical methods. The isothermal vulcanization kinetics were studied at various temperatures by rheometry and differential scanning calorimetry (DSC). The results obtained indicated that the nth order model could not accurately predict the curing performance. However, the autocatalytic approach can be used to estimate the vulcanization reaction mechanism of XNBR/epoxy/XHNTs nanocomposites. The kinetic parameters related to the degradation of XNBR/epoxy/XHNTs nanocomposites were also assessed using thermogravimetric analysis (TGA). TGA measurements suggested that the grafted nanotubes strongly enhanced the thermal stability of the nanocomposite.

scholarly journals Changes in thermal stability of lignocelluloses waste aggregates long-term incorporated in composite

2021 ◽  
Vol 900 (1) ◽  
pp. 012042
Author(s):  
N Stevulova ◽  
A Estokova
Keyword(s):  
Thermal Stability ◽  
Alkaline Treatment ◽  
Cement Matrix ◽  
Scanning Calorimetry ◽  
Alkali Ions ◽  
Thermal Gravimetry ◽  
Pre Treatment ◽  
Surface Modified ◽  
Thermal Stability Of

Abstract This paper is addressed to comparative study of changes in thermal stability of surface-modified hemp-hurds aggregates long-term incorporated in bio-aggregate-based composites with the original ones before their integration into alternative binder matrix. In this study, the effectiveness of alkaline treatment of hemp hurds compared to the raw bio-aggregates as well as in relation to their behaviour when they are long-term incorporated in the MgO-cement environment is investigated. The differences in the thermal behaviour of the samples are explained by the changed structure of hemp hurds constituents due to the pre-treatment and long-term action of the alternative binder components on the bio-aggregates. Alkaline treatment increases thermal stability of hemp hurds compared to raw sample. Also long-term incorporation of hemp hurds in MgO-cement matrix had a similar effect in case of alkaline modified bio-aggregates. The more alkali ions present in the structure of hemp hurdssamples, the more ash is formed during their thermal decomposition studied by thermal gravimetry (TG) and differential scanning calorimetry (DSC).

scholarly journals Thermal stability and thermal decomposition of sucralose

2018 ◽  
Vol 39 (4) ◽  
pp. 21
Author(s):  
Gilbert Bannach ◽  
Rafael R. Almeida ◽  
Luis G. Lacerda ◽  
Egon Schnitzler ◽  
Massao Ionashiro
Keyword(s):  
Thermal Stability ◽  
Thermal Analysis ◽  
Differential Scanning Calorimetry ◽  
Thermal Decomposition ◽  
Differential Thermal Analysis ◽  
Infrared Spectroscopy ◽  
Scanning Calorimetry ◽  
Thermoanalytical Techniques ◽  
Thermal Stability Of

Several papers have been described on the thermal stability of the sweetener, C12H19Cl3O8 (Sucralose). Nevertheless no study using thermoanalytical techniques was found in the literature. Simultaneous thermogravimetry and differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC) and infrared spectroscopy, have been used to study the thermal stability and thermal decomposition of sweetener.

Sign in / Sign up

Export Citation Format

Share Document