scholarly journals A Study on Optimum Mixture Ratio of Reactive Powder Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Mingyang Chen ◽  
Wenzhong Zheng
Keyword(s):  
Compressive Strength ◽  
Steel Fiber ◽  
Raw Materials ◽  
Reactive Powder Concrete ◽  
Mixture Ratio ◽  
Curing Methods ◽  
Main Components ◽  
Cement Strength ◽  
Reactive Powder ◽  
Design Factors

To optimize the main components of reactive powder concrete (RPC) for various curing methods, based on the fluidity and compressive strength, an inclusive experimental research is conducted on 58 different mixture ratios. The results indicate that owing to the increase of the cement strength, the RPC fluidity decreases and the cement strength is not proportional to the compressive strength. The addition of the fly ash and the nano-microbead is an effective way to improve the fluidity, and it is required at the low W/B ratio. However, the influence of the SF grade on the strength and fluidity is almost negligible. By considering the fluidity, strength, and economy of RPC as crucial design factors, SF90 is suggested. The contribution of the steel fiber to the compressive strength cannot be ignored. The upper envelope value of the steel fibers is required for the structure to resist appropriately against the fire. According to the test results, the mixture ratio formula is proposed through considering the characters of different compositions and curing methods. The strength coefficient k1 is introduced to verify the influence of the steel fiber content, and the parameters fb, αa, and αb in the formula are reevaluated. A reasonably good agreement between the calculated strength and those obtained from the tests is reported, except for the case of W/B = 0.16 with P.O.52.5 cement. The basic steps for preparations of different RPC strengths are given, which provide a valuable reference to choose appropriate raw materials and mixture ratio design for different strength values.

Tests on Mechanical Properties and Anti-Penetration Performance of Steel-Fiber Reactive Powder Concrete

2013 ◽  
Vol 671-674 ◽  
pp. 1761-1765
Author(s):  
Yong Liu ◽  
Chun Ming Song ◽  
Song Lin Yue
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Fracture Toughness ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Steel Fiber ◽  
Reactive Powder Concrete ◽  
Calculation Results ◽  
Reactive Powder ◽  
Penetration Tests

In order to get mechanical properties ,some RPC samples with 5% steel fiber are tested, many groups data were obtained such as compressive strength, shear strength and fracture toughness. And a group of tests on RPC with 5% steel-fiber under penetration were also conducted to validate the performance to impact. The penetration tests are carried out by the semi-AP projectiles with the diameter of 57 mm and earth penetrators with the diameter of 80 mm, and velocities of the two kinds of projectiles are 300～600 m/s and 800～900 m/s, respectively. By contrast between the experimental data and the calculation results of C30 reinforced concrete by using experiential formula under penetration, it shows that the resistance of steel-fiber RPC to penetration is 3 times as that of general C30 reinforced concrete.

Research on Impact Behavior of Reactive Powder Concrete

2010 ◽  
Vol 150-151 ◽  
pp. 779-782
Author(s):  
Qing Xin Zhao ◽  
Zhao Yang Liu ◽  
Jin Rui Zhang ◽  
Ran Ran Zhao
Keyword(s):  
Compressive Strength ◽  
Impact Toughness ◽  
Flexural Strength ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Impact Behavior ◽  
Reactive Powder Concrete ◽  
Flexural Toughness ◽  
Reactive Powder ◽  
The Impact

By means of the three-point bending impact equipment, with the measurement of ultrasonic velocity, the impact behavior and damage evolution of reactive powder concrete (RPC) with 0, 1%, 2% and 3% volume fraction of steel fiber were tested. The results showed that steel fiber significantly improved the compressive strength, flexural strength, flexural toughness and impact toughness of RPC matrix. The compressive strength, flexural strength, flexural toughness of RPC with 3% steel fiber increased by 40.1%, 102.1%, and 37.4 times than that of plain concrete, respectively, and simultaneously, the impact toughness of RPC with 3% steel fiber was 93.2 times higher than that with 1% steel fiber. RPC with 2% and 3% steel fiber dosage both had relatively high compressive strength, flexural strength and flexural toughness; however, compared with the sample with 2% steel fiber dosage, the impact toughness of RPC with 3% steel fiber dosage increased by more than 10 times. Therefore, taking economy and applicability into consideration, if we mainly emphasis on the compressive strength, flexural strength and flexural toughness, RPC with 2% steel fiber is optimal. While if impact toughness is critical, RPC with 3% steel fiber would be the best choice.

scholarly journals Properties of Reactive Powder Concrete Using Local Materials and Various Curing Conditions

2019 ◽  
Vol 4 (6) ◽  
pp. 74-83 ◽  
Author(s):  
Gamal I. K. ◽  
K. M. Elsayed ◽  
Mohamed Hussein Makhlouf ◽  
M. Alaa
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
High Strength ◽  
Hot Water ◽  
Reactive Powder Concrete ◽  
Normal Water ◽  
Reactive Powder ◽  
Local Materials

Reactive Powder Concrete RPC is comprise of (cement, quartz powder, sand, and superplasticizer) mixture with low water/cement ratio. It has not coarse aggregates and characterized by highly dense matrix, high strength concrete, excellent durability, and economic. This study aims to investigate fresh and hardened properties of locally cast RPC with several available economical materials such as silica fume (SF), fly ash (FA), steel fiber (STF), and glass fiber (GF). Experimental investigation were performed to study the effectiveness of partial replacement of cement by SF or FA to reach ultra-high strength concrete, effect of additional materials STF or GF in order to improve the fracture properties of the RPC mixes, and influence of the treated with normal water as well as with hot water. Fifteen different RPC mixes were cast with 20, 25, 30, and 35% cement replacement by SF, 25% cement replacement by FA, and another proportions taken combination between SF and FA with percentages 15, 20, 25% FA and constant 10% SF. Varying fiber types (steel fiber or glass fiber) added to concrete by different percentages 1, 2, and 3%. Specimens were treated with normal water 25ᵒC and hot water at 60ᵒC and 90ᵒC by 2 mixes with silica fume content 25% of binder and steel fiber content 2% by total volume. Performance of the various mixes is tested by the slump flow, compressive strength, flexure strength, splitting tensile strength, and density. The production of RPC using local materials is successfully get compressive strength of 121 MPa at the age of 28 days at standard conditions and normal water curing 25°C with Silica fume content 25% of binder and steel fiber content 2% by total volume of RPC and water/binder ratio of 0.25.  The results also showed the effect of curing by hot water 60 and 90°C, it is observed that compressive strength increases proportionally with curing temperatures and a compressive strength of 149.1 MPa at 90°C for 1days was obtained.

scholarly journals Investigation of the Match Relation between Steel Fiber and High-Strength Concrete Matrix in Reactive Powder Concrete

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1751 ◽  
Author(s):  
Guangyao Yang ◽  
Jiangxiong Wei ◽  
Qijun Yu ◽  
Haoliang Huang ◽  
Fangxian Li
Keyword(s):  
Compressive Strength ◽  
Steel Fiber ◽  
High Strength ◽  
Steel Fibers ◽  
Peak Strength ◽  
Reactive Powder Concrete ◽  
Medium Length ◽  
Reactive Powder ◽  
Concrete Matrix ◽  
Strength And Toughness

This study investigated the strength and toughness of reactive powder concrete (RPC) made with various steel fiber lengths and concrete strengths. The results indicated that among RPC samples with strength of 150 MPa, RPC reinforced with long steel fibers had the highest compressive strength, peak strength, and toughness. Among the RPC samples with strength of 270 MPa, RPC reinforced with short steel fibers had the highest compressive strength, and peak strength, while RPC reinforced with medium-length steel fibers had the highest toughness. As a result of the higher bond adhesion between fibers and ultra-high-strength RPC matrix, long steel fibers were more effective for the reinforcement of RPC with strength of 150 MPa, while short steel fibers were more effective for the reinforcement of RPC with strength of 270 MPa.

Effects Superplasticizer Type and Dosage on The Properties of Reactive Powder Concrete

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Eethar Thanon Dawood
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
Positive Impact ◽  
Physical And Mechanical Properties ◽  
Reactive Powder Concrete ◽  
Dry Density ◽  
Chemical Admixture ◽  
Main Components ◽  
Reactive Powder ◽  
Saturated Surface

Superplasticizer is one of the most common types of chemical admixtures used in the mortar or concrete, especially that characterized high performance like Reactive powder concrete. Recently, the chemical admixture is considered as one of the main components of cement-based products due to it has a significant role to improve the physical and mechanical properties generally. Therefore, the experimental work of this research has been an attempt to study the influence of two types of superplasticizers with different dosages on the properties of reactive powder concrete. The workability, compressive strength, and saturated surface dry density of reactive powder concrete used two types of chemical admixture(superplasticizer) individual and in combination have been studied and compared together. The results indicated that the use of superplasticizer type ViscoCrete-5930 in individual or combination with superplasticizer type KUT PLAST PCE600 has a positive impact on the properties of reactive powder concrete especially its flowability and compressive strength. Keywords:Reactive powder concrete; Superplasticizer; Flowability; Compressive strength; Saturated surface dry density;

The Mechanical Behavior of Reactive Powder Concrete with Different Steel Fiber Volume Contents

2014 ◽  
Vol 1065-1069 ◽  
pp. 1964-1968
Author(s):  
Xiao Fei Wang ◽  
Li Cheng Wu ◽  
Yang Ping Wang
Keyword(s):  
Compressive Strength ◽  
Volume Content ◽  
Bending Strength ◽  
Steel Fiber ◽  
Bending Test ◽  
Reactive Powder Concrete ◽  
Uniaxial Compression Test ◽  
Fiber Volume ◽  
Splitting Test ◽  
Reactive Powder

Through uniaxial compression test, tensile splitting test and bending test, we have researched the three kinds basic mechanical behaviors of Reactive Powder Concrete (RPC for short) with different steel fiber volume contents at 0%, 1%, 2% and 4% respectively. According to the result, the tensile splitting strength is a linear increase nearly with the increase of steel fiber volume content; and the bending strength is also increase with the increase of steel fiber volume content, When steel fiber volume content increases from 1% to 2%, the growing rate of bending strength reaches to maximum. When steel fiber volume content is within 4%, the compressive strength increases with the increase of steel fiber volume content. The compressive strength of plain RPC can reach to 135MPa, and the RPC with 4% steel fiber volume content is about 220MPa. This information can tell us that the addition of steel fiber in RPC can get an great increase of strength and toughness.

scholarly journals Behavior and strength of reinforced reactive powder concrete beams under impact loadings

2018 ◽  
Vol 7 (4) ◽  
pp. 2753
Author(s):  
Ibtihal Fadhil ◽  
Ayad K. Kadhem ◽  
Nisreen Salih
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Steel Fiber ◽  
Concrete Beams ◽  
Impact Load ◽  
Experimental Tests ◽  
Reinforced Concrete Beams ◽  
Reactive Powder Concrete ◽  
Reactive Powder ◽  
The Impact

Reactive powder concrete is a new concrete that has been used in recent years because of many advantages. The use of reactive powder concrete in structural elements such as beams provides higher compressive strength, higher modulus of elasticity, durable concrete and increasing the concrete ductility, so that the concrete has high resistance against tensile stress. The experimental tests of the reinforced concrete beams under the effects of impact loadings are investigated in this paper. The parameters being adopted in present paper are steel fiber of (1, 1.5 and 2%) by volume, dropped mass and height of drop. The reinforced concrete specimens were tested under impact load by one strike only. The test results indicate that the impact force increased when the compressive strength of concrete increased that when the steel fiber ratio becomes more and the deflection has become less.  

scholarly journals Direct Shear Strength of RPC Member

2021 ◽  
Vol 39 (1A) ◽  
pp. 22-33
Author(s):  
Shahad Q. Madhlom ◽  
Hussein A. Aziz ◽  
Ammar A. Ali
Keyword(s):  
Compressive Strength ◽  
Shear Strength ◽  
Steel Fiber ◽  
Shear Loading ◽  
Fiber Content ◽  
Reactive Powder Concrete ◽  
Direct Shear ◽  
Steel Rebar ◽  
Transverse Steel ◽  
Reactive Powder

In this research paper, results are obtained from Reactive Powder Concrete (RPC) push-off specimens - double L shape subjected to direct shear loading. Different parameters considered are compressive strength, percentages of steel fiber, presence of aggregate and shear reinforcement. The results show that increasing in steel fiber content starting from 0.0% and ending with 1.5% leads to increases in the shear strength by (261%) and attempt to decrease its brittleness. The presence of steel fiber content enhances and improves the tensile strength and  the shear strength. Using RPC in constructing the specimens enhances the shear strength by 29.6% compared with NSC specimen. Shear strength increased by 25% when the compressive strength increased from 75 to 90MPa. The presence of transverse steel rebar in the direction of shear line increased the shear strength by (108.3%) as compare with the specimen without shear rebar. The presence of small aggregate in RPC mix creates an increase in the shear strength by (9.1%).

Tests on Mechanical Properties and Anti-Explosion Performance of Steel-Fiber Reactive Powder Concrete

2011 ◽  
Vol 368-373 ◽  
pp. 436-440
Author(s):  
Chun Ming Song ◽  
Ming Yang Wang ◽  
De Rong Wang
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Compressive Strength ◽  
Shear Strength ◽  
Steel Fiber ◽  
High Strength ◽  
Reactive Powder Concrete ◽  
Compression Coefficient ◽  
Reactive Powder ◽  
Very High

In order to get mechanical properties and anti-explosion capability parameters, some RPC samples with 5% steel fiber are tested, many groups data were obtained such as compressive strength, shear strength and fracture toughness. The model tests are also carried out on RPC shelter plate under contact explosion, the most important parameter to express anti-explosion capability,i.e. compression coefficient of the material, is obtained by above experiments and theory study, the results of tests show RPC with steel fiber has very high strength and anti-explosion capability, its compressive strength and anti-explosion capability are about six and three times higher than those of C30 concrete respectively.

Experimental Investigation on Stress-Strain Curves of Reactive Powder Concrete under Uniaxial Compression

2011 ◽  
Vol 261-263 ◽  
pp. 192-196 ◽  
Author(s):  
Yan Zhong Ju ◽  
De Hong Wang ◽  
Fei Jiang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Uniaxial Compression ◽  
Steel Fiber ◽  
Strain Curve ◽  
Fiber Content ◽  
Reactive Powder Concrete ◽  
Stress Strain ◽  
Reactive Powder

Based on experiments of uniaxial compression and flexural experiments, the basic mechanical properties (compressive strength and flexural strength) of reactive powder concrete (RPC) were investigated, the effect of the steel fiber content on mechanical properties of RPC was studied in this work. The resu1ts indicate that the axial compressive strength of RPC had no obvious change with the change of steel fiber content. When the steel fiber content varied from 1.0% to 2.0%, the flexural strength of RPC had no obvious change.When the steel fiber content varied from 2.0% to 5.0%, the flexural strength of RPC increased dramaticlly with the increase of steel fibers content. According to experiment curves, an equation for the compressive stress-strain curve of RPC was deduced with different stee1 fiber content.

Sign in / Sign up

Export Citation Format

Share Document