scholarly journals Properties of Reactive Powder Concrete Using Local Materials and Various Curing Conditions

2019 ◽  
Vol 4 (6) ◽  
pp. 74-83 ◽  
Author(s):  
Gamal I. K. ◽  
K. M. Elsayed ◽  
Mohamed Hussein Makhlouf ◽  
M. Alaa
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
High Strength ◽  
Hot Water ◽  
Reactive Powder Concrete ◽  
Normal Water ◽  
Reactive Powder ◽  
Local Materials

Reactive Powder Concrete RPC is comprise of (cement, quartz powder, sand, and superplasticizer) mixture with low water/cement ratio. It has not coarse aggregates and characterized by highly dense matrix, high strength concrete, excellent durability, and economic. This study aims to investigate fresh and hardened properties of locally cast RPC with several available economical materials such as silica fume (SF), fly ash (FA), steel fiber (STF), and glass fiber (GF). Experimental investigation were performed to study the effectiveness of partial replacement of cement by SF or FA to reach ultra-high strength concrete, effect of additional materials STF or GF in order to improve the fracture properties of the RPC mixes, and influence of the treated with normal water as well as with hot water. Fifteen different RPC mixes were cast with 20, 25, 30, and 35% cement replacement by SF, 25% cement replacement by FA, and another proportions taken combination between SF and FA with percentages 15, 20, 25% FA and constant 10% SF. Varying fiber types (steel fiber or glass fiber) added to concrete by different percentages 1, 2, and 3%. Specimens were treated with normal water 25ᵒC and hot water at 60ᵒC and 90ᵒC by 2 mixes with silica fume content 25% of binder and steel fiber content 2% by total volume. Performance of the various mixes is tested by the slump flow, compressive strength, flexure strength, splitting tensile strength, and density. The production of RPC using local materials is successfully get compressive strength of 121 MPa at the age of 28 days at standard conditions and normal water curing 25°C with Silica fume content 25% of binder and steel fiber content 2% by total volume of RPC and water/binder ratio of 0.25.  The results also showed the effect of curing by hot water 60 and 90°C, it is observed that compressive strength increases proportionally with curing temperatures and a compressive strength of 149.1 MPa at 90°C for 1days was obtained.

Effects of Silica Fume Addition on the Spalling Phenomena of Reactive Powder Concrete

2012 ◽  
Vol 174-177 ◽  
pp. 1090-1095 ◽  
Author(s):  
Kai Pei Tian ◽  
Yang Ju ◽  
Hong Bin Liu ◽  
Jin Hui Liu ◽  
Li Wang ◽  
...  
Keyword(s):  
Temperature Distribution ◽  
Vapor Pressure ◽  
Silica Fume ◽  
High Strength Concrete ◽  
High Strength ◽  
Reactive Powder Concrete ◽  
Spalling Resistance ◽  
Explosive Spalling ◽  
Strength Concrete ◽  
Reactive Powder

The explosive spalling of high-strength concrete due to fire is a problem that has garnered increasingly widespread attention, particularly the explosive spalling of reactive powder concrete (RPC). For years, based on the vapor pressure mechanism, the addition of fibers has been demonstrated to be somewhat effective in protecting against spalling. However, relevant experiments indicate that fibers are not effective for dense concrete, which is a challenge for the simple vapor pressure mechanism in providing spalling resistance for RPC. The authors found that silica fume plays an important role in the explosive spalling of RPC. Thus, four classes of RPCs with different ratios of silica fume were prepared, and the spalling phenomena and the inner temperature distribution during heating were investigated. The results show that silica fume content has a prominent effect on the spalling process of RPC.

scholarly journals Investigation of the Match Relation between Steel Fiber and High-Strength Concrete Matrix in Reactive Powder Concrete

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1751 ◽  
Author(s):  
Guangyao Yang ◽  
Jiangxiong Wei ◽  
Qijun Yu ◽  
Haoliang Huang ◽  
Fangxian Li
Keyword(s):  
Compressive Strength ◽  
Steel Fiber ◽  
High Strength ◽  
Steel Fibers ◽  
Peak Strength ◽  
Reactive Powder Concrete ◽  
Medium Length ◽  
Reactive Powder ◽  
Concrete Matrix ◽  
Strength And Toughness

This study investigated the strength and toughness of reactive powder concrete (RPC) made with various steel fiber lengths and concrete strengths. The results indicated that among RPC samples with strength of 150 MPa, RPC reinforced with long steel fibers had the highest compressive strength, peak strength, and toughness. Among the RPC samples with strength of 270 MPa, RPC reinforced with short steel fibers had the highest compressive strength, and peak strength, while RPC reinforced with medium-length steel fibers had the highest toughness. As a result of the higher bond adhesion between fibers and ultra-high-strength RPC matrix, long steel fibers were more effective for the reinforcement of RPC with strength of 150 MPa, while short steel fibers were more effective for the reinforcement of RPC with strength of 270 MPa.

scholarly journals Experimental Study on Reactive Powder Concrete under Flexural Loading

2018 ◽  
Vol 7 (2.24) ◽  
pp. 552
Author(s):  
Jeganmurugan P ◽  
Rakesh Senthil Kumar G V ◽  
Sivasharmina M ◽  
Sowmiya S ◽  
Vasanthan M
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Silica Fume ◽  
High Strength ◽  
Reactive Powder Concrete ◽  
Split Tensile Strength ◽  
Mix Proportion ◽  
Compressive Strength Test ◽  
Trial And Error Method ◽  
Reactive Powder

Reactive powder concrete (RPC) is ultra high strength with advanced mechanical properties. Reactive powder concrete is a concrete without coarse aggregate, contains cement, silica fume, quartz sand, quartz powder, super plasticizer, steel fibre and polypropylene fibre with very low water cement ratio under normal curing condition. RPC has been produce with high compressive strength ranging from upto 800 MPa with high flexural strength up to 50 MPa and in some cases provided with absences of steel reinforcement. Mix proportions of RPC were found by trial and error method, the concrete cubes of size 100mmx100mmx100mm were cast for find compressive strength of NRPC at 7days. Concrete cubes and cylinders of sizes 100mmx100mmx100mm and 100mmx150mm have to be cast for finding compressive strength and split tensile strength at 28 days. Flexural strength of NRPC and MRPC will be find out by casting prism of size 500mmx 100mmx 100 mm. The optimum mix proportion has to be finalized by comparing the results of all concrete specimens. Compressive strength test results shows that addition of silica fume upto 0.22% will increase the compressive strength of reactive powder concrete.   

scholarly journals Effect of silica fume/binder ratio on compressive strength development of reactive powder concrete under two curing systems

2018 ◽  
Vol 162 ◽  
pp. 02022 ◽  
Author(s):  
Mohammed Abed ◽  
Mohammed Nasr ◽  
Zaid Hasan
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
Hot Water ◽  
Reactive Powder Concrete ◽  
Strength Development ◽  
Accelerated Curing ◽  
Binder Ratio ◽  
Compressive Strength Development ◽  
Reactive Powder ◽  
Curing Systems

This paper aims to investigate the influence of Silica fume proportion ratio in respect to the total amount of binder on compressive strength of reactive powder concrete cured in two curing systems. Four ratios of Silica fume (0%, 15%, 25% and 35%) as replacement of cement weight were considered. After de-molding, two curing systems were used: the first included immersing the cubic specimens in water at 24 ± 2°C until the test. In the second, the specimens were immersed in hot water at 105 ± 5°C (accelerated curing) for 48 hours, then in water at 24 ± 2°C until the test. The results show that mix which contains 25% Silica fume imparts more enhancement on compressive strength as compared to the control mix. Also, it was found that the second system of curing has more influence on compressive strength development than the first one, especially at earlier ages.

scholarly journals REACTIVE POWDER CONCRETE DENGAN SUMBER SILIKA DARI LIMBAH BAHAN ORGANIK

Teras Jurnal ◽  
2017 ◽  
Vol 3 (2) ◽  
pp. 157
Author(s):  
Yulius Rief Alkhaly
Keyword(s):  
Silica Fume ◽  
High Strength Concrete ◽  
High Performance ◽  
High Strength ◽  
Reactive Powder Concrete ◽  
Normal Concrete ◽  
Green Concrete ◽  
Strength Concrete ◽  
Reactive Powder

<p>Reactive powder concrete (RPC) merupakan varian baru dari beton mutu ultra tingggi (ultra high strength concrete) yang diperkenalkan kepada umum pertama kali pada tahun 1994. Beton modern ini memiliki beberapa keunggulan dibandingkan beton konvensional (normal concrete) atau beton kinerja tinggi (high performance concretes). Penelitian tentang RPC di Indonesi masih sangat terbatas, RPC pertama bermaterial lokal Indonesia dikembangkan tahun 2009, dengan sumber silika berasal dari silica fume. Sebagai bagian dari berbagai penelitian lanjutan tentang RPC, hasil akhir dari riset ini diharapkan dapat menghasilkan RPC yang benar-benar sesuai dengan karakteristik material di Indonesia. Sumber silika yang digunakan berasal dari limbah bahan organik sehingga dapat menekan biaya produksi dan menghasilan green concrete yang dapat mengurangi dampak negatif limbah terhadap lingkungan.</p><p><strong>Kata kunci:</strong> Reactive Powder Concrete, Silika, Limbah Bahan Organik</p>

Tests on Mechanical Properties and Anti-Explosion Performance of Steel-Fiber Reactive Powder Concrete

2011 ◽  
Vol 368-373 ◽  
pp. 436-440
Author(s):  
Chun Ming Song ◽  
Ming Yang Wang ◽  
De Rong Wang
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Compressive Strength ◽  
Shear Strength ◽  
Steel Fiber ◽  
High Strength ◽  
Reactive Powder Concrete ◽  
Compression Coefficient ◽  
Reactive Powder ◽  
Very High

In order to get mechanical properties and anti-explosion capability parameters, some RPC samples with 5% steel fiber are tested, many groups data were obtained such as compressive strength, shear strength and fracture toughness. The model tests are also carried out on RPC shelter plate under contact explosion, the most important parameter to express anti-explosion capability,i.e. compression coefficient of the material, is obtained by above experiments and theory study, the results of tests show RPC with steel fiber has very high strength and anti-explosion capability, its compressive strength and anti-explosion capability are about six and three times higher than those of C30 concrete respectively.

scholarly journals Compressive Behavior and Mechanical Characteristics and Their Application to Stress-Strain Relationship of Steel Fiber-Reinforced Reactive Powder Concrete

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Baek-Il Bae ◽  
Hyun-Ki Choi ◽  
Bong-Seop Lee ◽  
Chang-Hoon Bang
Keyword(s):  
Mechanical Properties ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
High Strength ◽  
Steel Fibers ◽  
Reactive Powder Concrete ◽  
Test Results ◽  
Strength Concrete ◽  
Estimation Equations ◽  
Reactive Powder

Although mechanical properties of concrete under uniaxial compression are important to design concrete structure, current design codes or other empirical equations have clear limitation on the prediction of mechanical properties. Various types of fiber-reinforced reactive powder concrete matrix were tested for making more usable and accurate estimation equations for mechanical properties for ultra high strength concrete. Investigated matrix has compressive strength ranged from 30 MPa to 200 MPa. Ultra high strength concrete was made by means of reactive powder concrete. Preventing brittle failure of this type of matrix, steel fibers were used. The volume fraction of steel fiber ranged from 0 to 2%. From the test results, steel fibers significantly increase the ductility, strength and stiffness of ultra high strength matrix. They are quantified with previously conducted researches about material properties of concrete under uniaxial loading. Applicability of estimation equations for mechanical properties of concrete was evaluated with test results of this study. From the evaluation, regression analysis was carried out, and new estimation equations were proposed. And these proposed equations were applied into stress-strain relation which was developed by previous research. Ascending part, which was affected by proposed equations of this study directly, well fitted into experimental results.

scholarly journals Evaluation of Mix Proportions and Mechanical Properties of Normal and High-Strength Fibers Concrete

2019 ◽  
Vol 9 (2) ◽  
pp. 202-207
Author(s):  
Imad R. Mustafa ◽  
Omar Q. Aziz
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Silica Fume ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
High Strength ◽  
Splitting Tensile Strength ◽  
Strength Concrete

An experimental program is carried out to evaluate the mix design and mechanical properties of normal strength concrete (NSC) grade 40 MPa and high-strength concrete grade 60 and 80 MPa. The study investigates using silica fume to produce high-strength concrete grade 80 MPa and highlights the influence of adding steel fiber on the mechanical properties of normal and high-strength concrete. For NSC, the compressive strength is found at 7 and 28 days. While for higher strength concrete, the compressive strength is determined at 7, 28, and 56 days. The splitting tensile strength and flexural strength is determined at 28 days. Based on results, the specimens with 14% silica fume are higher compressive strength than the specimens with 10% silica fume by 21.8%. The presence of steel fiber increased the compressive strength of normal and high-strength concrete at 7, 28, and 56 days curing ages with different percentage and the steel fiber has an important role in increasing the splitting tensile strength and flexural strength of normal and high-strength concrete.

scholarly journals Mechanical Behavior of Reactive Powder Concrete Made From Local Material Subjected to Axial Pressure

2021 ◽  
Vol 8 ◽  
Author(s):  
Jing Ji ◽  
Wei Kang ◽  
Liangqin Jiang ◽  
Yunhao Li ◽  
Hongguo Ren ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
Quartz Sand ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Slag Powder ◽  
Binder Ratio ◽  
Reactive Powder ◽  
Water To Binder Ratio ◽  
Local Materials

In order to investigate the influence of various parameters on the compressive strength and fluidity of reactive powder concrete (RPC) made from local materials, 22 groups of RPC cubic specimens and 3 groups of RPC prism specimens were designed, and the main parameters included water to binder ratio, the ratio of silica fume to cement, the ratio of slag powder to cement, the ratio of quartz sand to cement, volume fraction of steel fiber, and steam curing time. The stress-strain curves and failure mode of RPC cubic specimens were obtained by the axial compression test. The influence of various parameters on the compressive mechanical properties and the mixture fluidity of RPC cubic specimens was analyzed. The results showed that the ultimate compressive strength (fcu) of RPC gradually decreases with the increase in the water to binder ratio; however, fcu increases with the increase in the volume fraction of steel fiber. fcu increases firstly and then decreases with the increase in the ratio of silica fume to cement, the ratio of slag powder to cement, and the ratio of quartz sand to cement, so there exists a peak point. The fluidity of RPC mixture increases with the increase in the water to binder ratio and the ratio of slag powder to cement; on the contrary, it decreases with the increase in the ratio of silica fume to cement, the ratio of quartz sand to cement, and volume fraction of steel fiber. Based on the analysis of the parameters, the optimal mix proportion of the RPC made from local materials is proposed. The constitutive model of RPC is established according to the stress-strain curves of RPC prism specimens. Finally, the relationship between compressive strength and elastic modulus of RPC made of local materials is regressed statistically.

Tests on Mechanical Properties and Anti-Penetration Performance of Steel-Fiber Reactive Powder Concrete

2013 ◽  
Vol 671-674 ◽  
pp. 1761-1765
Author(s):  
Yong Liu ◽  
Chun Ming Song ◽  
Song Lin Yue
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Fracture Toughness ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Steel Fiber ◽  
Reactive Powder Concrete ◽  
Calculation Results ◽  
Reactive Powder ◽  
Penetration Tests

In order to get mechanical properties ,some RPC samples with 5% steel fiber are tested, many groups data were obtained such as compressive strength, shear strength and fracture toughness. And a group of tests on RPC with 5% steel-fiber under penetration were also conducted to validate the performance to impact. The penetration tests are carried out by the semi-AP projectiles with the diameter of 57 mm and earth penetrators with the diameter of 80 mm, and velocities of the two kinds of projectiles are 300～600 m/s and 800～900 m/s, respectively. By contrast between the experimental data and the calculation results of C30 reinforced concrete by using experiential formula under penetration, it shows that the resistance of steel-fiber RPC to penetration is 3 times as that of general C30 reinforced concrete.

Sign in / Sign up

Export Citation Format

Share Document