scholarly journals Mesoporous Nickel-Based Zeolite Capsule Complex with Fe3O4 as Electrode for Advanced Supercapacitor

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Lili Song ◽  
Yinghui Han ◽  
Feng Guo ◽  
Yunpeng Jiao ◽  
Yujuan Li ◽  
...  
Keyword(s):  
Energy Storage ◽  
Specific Capacitance ◽  
Current Density ◽  
High Specific Capacitance ◽  
Positive Electrodes ◽  
Storage Mechanism ◽  
Electrochemical Testing ◽  
Transmission Electron ◽  
Adsorption Analysis ◽  
Energy Storage Properties

A new kind of zeolite capsule complex with ferriferous oxide (Fe3O4) materials was prepared in this work. Its morphology was characterized via the scanning electron microscope (SEM), the high-resolution transmission electron microscopy (HRTEM), N2 adsorption analysis, and X-ray powder diffraction, respectively. The mesoporous nickel-based complex electrodes using substrate coating exhibited excellent energy storage properties through electrochemical testing. The high specific capacitance of 739.8 F g−1 was achieved at the current density of 1 A g−1 in a 6 M KOH solution. The good capacitance retention can retain 72.8% after 1000 cycles in a current density of 1 A g−1. The energy storage mechanism of the nickel-based complex electrodes was also analyzed. Furthermore, the asymmetrical supercapacitors (ASCs) were fabricated using the zeolite capsule complex with Fe3O4 as positive electrodes and the AC as negative electrodes, which performs high specific capacitance, outstanding energy density, superb power density, excellent cycle life, and small internal impedance. Those results suggest that the mesoporous nickel-based zeolite capsule complex with Fe3O4 as an electrode would be an ideal candidate material for supercapacitor applications.

Facile synthesis of a hierarchical CuS/CuSCN nanocomposite with advanced energy storage properties

2018 ◽  
Vol 42 (18) ◽  
pp. 15387-15396 ◽  
Author(s):  
Yasun Y. Kannangara ◽  
Pichaimani Prabunathan ◽  
Jang-Kun Song
Keyword(s):  
Energy Storage ◽  
Specific Capacitance ◽  
High Specific Capacitance ◽  
Facile Synthesis ◽  
Energy Storage Properties ◽  
Facile Fabrication ◽  
Storage Properties

Facile fabrication of a CuS/CuSCN nanocomposite electrode for a supercapacitor with a high specific capacitance (1787.3 F g−1).

Hybrid nanostructured C-dot decorated Fe3O4electrode materials for superior electrochemical energy storage performance

2015 ◽  
Vol 44 (19) ◽  
pp. 9221-9229 ◽  
Author(s):  
K. Bhattacharya ◽  
P. Deb
Keyword(s):  
Quantum Dots ◽  
Energy Storage ◽  
Specific Capacitance ◽  
High Specific Capacitance ◽  
Carbon Quantum Dots ◽  
Electrochemical Energy Storage ◽  
The Novel ◽  
Hybrid Nanocomposite ◽  
Storage Performance ◽  
Electrochemical Energy

Here, the novel Fe3O4-C hybrid nanocomposite demonstrates high specific capacitance (S.C.) than the pristine Fe3O4nanospheres due to the presence of the highly conducting carbon quantum dots.

scholarly journals Liquid Phase Synthesis of CoP Nanoparticles with High Electrical Conductivity for Advanced Energy Storage

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Guo-Qun Zhang ◽  
Bo Li ◽  
Mao-Cheng Liu ◽  
Shang-Ke Yuan ◽  
Leng-Yuan Niu
Keyword(s):  
Electrical Conductivity ◽  
Energy Storage ◽  
Liquid Phase ◽  
Specific Capacitance ◽  
Current Density ◽  
High Surface ◽  
High Surface Area ◽  
High Energy ◽  
High Energy Density ◽  
Energy Storage Materials

Transition metal phosphide alloys possess the metalloid characteristics and superior electrical conductivity and are a kind of high electrical conductive pseudocapacitive materials. Herein, high electrical conductive cobalt phosphide alloys are fabricated through a liquid phase process and a nanoparticles structure with high surface area is obtained. The highest specific capacitance of 286 F g−1 is reached at a current density of 0.5 A g−1. 63.4% of the specific capacitance is retained when the current density increased 16 times and 98.5% of the specific capacitance is maintained after 5000 cycles. The AC//CoP asymmetric supercapacitor also shows a high energy density (21.3 Wh kg−1) and excellent stability (97.8% of the specific capacitance is retained after 5000 cycles). The study provides a new strategy for the construction of high-performance energy storage materials by enhancing their intrinsic electrical conductivity.

A novel synthesis of ultra thin graphene sheets for energy storage applications using malonic acid as a reducing agent

2014 ◽  
Vol 2 (47) ◽  
pp. 20345-20357 ◽  
Author(s):  
Anil Kumar ◽  
Mahima Khandelwal
Keyword(s):  
Energy Storage ◽  
Potential Energy ◽  
Specific Capacitance ◽  
Malonic Acid ◽  
High Specific Capacitance ◽  
Reducing Agent ◽  
Graphene Sheets ◽  
Novel Synthesis ◽  
Energy Storage Applications ◽  
Charge Discharge

Novel ultrathin graphene sheets (0.41 ± 0.03 nm) with increased sp2 character, high specific capacitance and charge–discharge capability have been synthesized and demonstrated to have potential energy storage applications.

Controllable synthesis of 3D hierarchical bismuth compounds with good electrochemical performance for advanced energy storage devices

RSC Advances ◽  
2015 ◽  
Vol 5 (64) ◽  
pp. 51773-51778 ◽  
Author(s):  
Jinfeng Sun ◽  
Jinqing Wang ◽  
Zhangpeng Li ◽  
Zhigang Yang ◽  
Shengrong Yang
Keyword(s):  
Energy Storage ◽  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Rate Capability ◽  
High Specific Capacitance ◽  
Controllable Synthesis ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Bismuth Compounds

3D hierarchical bismuth (Bi)-based compounds with controllable sizes and morphologies exhibit high specific capacitance and superior rate capability.

Nanostructured oxides for energy storage applications in batteries and supercapacitors

2009 ◽  
Vol 81 (8) ◽  
pp. 1489-1498 ◽  
Author(s):  
Amreesh Chandra ◽  
Alexander J. Roberts ◽  
Eric Lam How Yee ◽  
Robert C. T. Slade
Keyword(s):  
Electron Microscopy ◽  
Energy Storage ◽  
Specific Capacitance ◽  
Electrode Materials ◽  
Particle Morphology ◽  
Hydrothermal Route ◽  
Conductivity Enhancement ◽  
Surface Areas ◽  
Transmission Electron

Nanostructured materials are extensively investigated for application in energy storage and power generation devices. This paper deals with the synthesis and characterization of nanomaterials based on oxides of vanadium and with their application as electrode materials for energy storage systems viz. supercapacitors. These nano-oxides have been synthesized using a hydrothermal route in the presence of templates: 1-hexadecylamine, Tweens and Brij types. Using templates during synthesis enables tailoring of the particle morphology and physical characteristics of synthesized powders. Broad X-ray diffraction peaks show the formation of nanoparticles, confirmed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigations. SEM studies show that a large range of nanostructures such as needles, fibers, particles, etc. can be synthesized. These particles have varying surface areas and electrical conductivity. Enhancement of surface area as much as seven times relative to surface areas of starting parent materials has been observed. These properties make such materials ideal candidates for application as electrode materials in supercapacitors. Assembly and characterization of supercapacitors based on electrodes containing these active nano-oxides are discussed. Specific capacitance of >100 F g–1 has been observed. The specific capacitance decreases with cycling: causes of this phenomenon are presented.

Engineering of electrodeposited binder-free organic-nickel hydroxide based nanohybrids for energy storage and electrocatalytic alkaline water splitting

2020 ◽  
Vol 4 (3) ◽  
pp. 1320-1331 ◽  
Author(s):  
Rohit G. Jadhav ◽  
Devraj Singh ◽  
Shaikh M. Mobin ◽  
Apurba K. Das
Keyword(s):  
Energy Storage ◽  
Specific Capacitance ◽  
Water Splitting ◽  
Nickel Hydroxide ◽  
High Specific Capacitance ◽  
Alkaline Water ◽  
Binder Free

A binder-free electrodeposited organic–inorganic multifunctional nanohybrid electrode exhibits high specific capacitance with electrocatalytic water splitting performance.

scholarly journals Characteristics of Glycerolized Chitosan: NH4NO3-Based Polymer Electrolyte for Energy Storage Devices with Extremely High Specific Capacitance and Energy Density Over 1000 Cycles

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2718
Author(s):  
Shujahadeen B. Aziz ◽  
M. A. Brza ◽  
Iver Brevik ◽  
M. H. Hamsan ◽  
Rebar T. Abdulwahid ◽  
...  
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Polymer Electrolyte ◽  
Specific Capacitance ◽  
Electrochemical Techniques ◽  
High Specific Capacitance ◽  
Transference Number ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
The Impact

In this work, plasticized polymer electrolyte films consisting of chitosan, ammonium nitrate (NH4NO3) and glycerol for utilization in energy storage devices was presented. Various microscopic, spectroscopic and electrochemical techniques were used to characterize the concerned electrolyte and the electrical double-layer capacitor (EDLC) assembly. The nature of complexation between the polymer electrolyte components was examined via X-ray diffraction analysis. In the morphological study, field emission scanning electron microscopy (FESEM) was used to investigate the impact of glycerol as a plasticizer on the morphology of films. The polymer electrolyte (conducting membrane) was found to have a conductivity of 3.21 × 10−3 S/cm. It is indicated that the number density (n), mobility (μ) and diffusion coefficient (D) of ions are increased with the glycerol amount. The mechanism of charge storing was clarified, which implies a non-Faradaic process. The voltage window of the polymer electrolyte is 2.32 V. It was proved that the ion is responsible for charge-carrying via measuring the transference number (TNM). It was also determined that the internal resistance of the EDLC assembly lay between 39 and 50 Ω. The parameters associated with the EDLC assembly are of great importance and the specific capacitance (Cspe) was determined to be almost constant over 1 to 1000 cycles with an average of 124 F/g. Other decisive parameters were found: energy density (18 Wh/kg) and power density (2700 W/kg).

Facile hydrothermal synthesis of ternary CeO2–SnO2/rGO nanocomposite for supercapacitor application

2020 ◽  
Vol 13 (02) ◽  
pp. 2051005 ◽  
Author(s):  
Godlaveeti Sreenivasa Kumar ◽  
Somala Adinarayana Reddy ◽  
Hussen Maseed ◽  
Nagireddy Ramamanohar Reddy
Keyword(s):  
Electron Microscope ◽  
Specific Capacitance ◽  
High Performance ◽  
High Specific Capacitance ◽  
Energy Storage And Conversion ◽  
X Ray Diffraction ◽  
X Ray ◽  
Supercapacitor Application ◽  
Transmission Electron ◽  
One Step

In this work, we present the synthesis of a ternary CeO2–SnO2/rGO nanocomposite by using a facile one-step hydrothermal method. The as-synthesized composite was structural, chemical, morphological, elemental information studied by using different characterization techniques X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and field emission scanning electron microscope (FESEM), energy dispersive X-ray spectroscopy (EDAX) and transmission electron microscope (TEM). The CeO2–SnO2/rGO exhibited an excellent specific capacitance of 156[Formula: see text]F[Formula: see text][Formula: see text] at 0.5[Formula: see text]A/g in the presence of 3 M KOH solution. The synergic effect of CeO2, SnO2 and graphene composite coated on Ni foam endowed a high specific capacitance than their individual compounds. This work suggests that the novel ternary composite is a promising candidate for the high performance electrochemical energy storage and conversion systems.

Hierarchical Dendritic Polypyrrole with High Specific Capacitance for High-performance Supercapacitor Electrode Materials

2017 ◽  
Vol 20 (4) ◽  
pp. 197-204
Author(s):  
Weiliang Chen ◽  
Shuhua Pang ◽  
Zheng Liu ◽  
Zhewei Yang ◽  
Xin Fan ◽  
...  
Keyword(s):  
Specific Capacitance ◽  
Current Density ◽  
High Performance ◽  
Electrode Materials ◽  
High Specific Capacitance ◽  
Chemical Oxidation ◽  
Channel Structure ◽  
Supercapacitor Electrode ◽  
Infrared Spectrometer ◽  
A Current

Polypyrrole with hierarchical dendritic structures assembled with cauliflower-like structure of nanospheres, was synthesized by chemical oxidation polymerization. The structure of polyryrrole was characterized by Fourier transform infrared spectrometer and scanning electron microscopy. The electrochemical performance was performed on CHI660 electrochemical workstation. The results show that oxalic acid has a significant effect on morphology of PPy products. The hierarchical dendritic PPyOA(3) electrodes possess a large specific capacitance as high as 744 F/g at a current density of 0.2 A/g and could achieve a higher specific capacitance of 362 F/g even at a current density of 5.0 A/g. Moreover, the dendritic PPy products produce a large surface area on the electrode through the formation of the channel structure with their assembled cauliflower-like morphology, which facilitates the charge/electron transfer relative to the spherical PPy electrode. The spherical dendritic PPyOA(3) electrode has 58% retention of initial specific capacitance after 260 cycles. The as-prepared dendritic polypyrrole with high performance is a promsing electrode material for supercapacitor.

Sign in / Sign up

Export Citation Format

Share Document