scholarly journals Prediction of Small-Strain Dynamic Properties on Granulated Spherical Glass Bead-Polyurethane Mixtures

2019 ◽  
Vol 2019 ◽  
pp. 1-12
Author(s):  
Gyeong-o Kang ◽  
Woong Choi ◽  
Changho Lee
Keyword(s):  
Glass Bead ◽  
Void Ratio ◽  
Dynamic Properties ◽  
Damping Ratio ◽  
Confining Pressure ◽  
Small Strain ◽  
Resonant Column ◽  
Small Strain Shear Modulus ◽  
Particle Size Ratio ◽  
Large Particles

This paper aims to propose predictive equations for the small-strain shear modulus (Gmax) and small-strain damping ratio (Dmin) of a granulated mixture with plastic and nonplastic materials to reduce the dynamic energy of the ground. Polyurethane bead (PB) and glass bead (GB) were used as the plastic and nonplastic materials, respectively. 180 resonant-column tests were conducted with various conditions affecting the dynamic properties, such as nonplastic particle content (PC), void ratio (e), particle-size ratio (sr), and mean effective confining pressure (σm′). The results showed that Gmax and Dmin, respectively, increased and decreased as e decreased with increasing σm′ of material mixtures. In addition, Gmax decreased with an increase in PC, whereas Dmin increased. It was also found that sr of materials affected the changes in Gmax and Dmin. With an increase in sr, Gmax increased while Dmin decreased because small particles do not hinder the behavior of large particles as the size of larger particles increases. Finally, based on the results, new equations for estimating Gmax and Dmin of a granulated mixture with PB and GB were proposed as functions of PC, e, median grain size (D50), and σm′.

Dynamic properties of some cohesive soils of Ontario

1981 ◽  
Vol 18 (3) ◽  
pp. 371-389 ◽  
Author(s):  
T. C. Kim ◽  
M. Novak
Keyword(s):  
Void Ratio ◽  
Dynamic Behaviour ◽  
Dynamic Properties ◽  
Damping Ratio ◽  
Confining Pressure ◽  
Dynamic Loads ◽  
Dynamic Shear Modulus ◽  
Cohesive Soils ◽  
Resonant Column ◽  
Dynamic Shear

The dynamic behaviour of some cohesive soils of southwestern Ontario is experimentally investigated using a resonant column apparatus. Attention is concentrated particularly on the dynamic shear modulus, Young's modulus, and damping ratio. The variation of these characteristics with void ratio, confining pressure, strain, and stress history is studied. Data are presented that can be utilized in the design of foundations and structures exposed to dynamic loads.

scholarly journals Small-Strain Dynamic Properties of Lean Cemented Sand and Gravel Materials under Different Cementing Agent Contents

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Jie Yang ◽  
Xin Cai ◽  
Yangong Shan ◽  
Miaomiao Yang ◽  
Xingwen Guo ◽  
...  
Keyword(s):  
Dynamic Properties ◽  
Damping Ratio ◽  
Confining Pressure ◽  
Small Strain ◽  
Triaxial Tests ◽  
Dynamic Shear Modulus ◽  
Engineering Applications ◽  
Cemented Sand ◽  
Sand And Gravel ◽  
Cementing Agent

Lean cemented sand and gravel (LCSG) materials are increasingly being used in dams, embankments, and other civil engineering applications. Therefore, their mechanical properties and stress-strain behavior should be systematically understood. In this study, the small-strain dynamic properties of LCSG materials were examined. A series of dynamic triaxial tests were performed to investigate the effects of the confining pressure and cementing agent content of the material on its dynamic shear modulus (Gd) and damping ratio (λ). The results show that Gd increased and λ decreased with increasing confining pressure and cementing agent content; however, under the same confining pressure and cementing agent content, Gd decreased gradually in accordance with shear strain. Furthermore, new expressions were derived for Gd and λ, as well as for their maxima. The results of this study could provide a reference for practical engineering applications, including the construction of dams using LCSG materials.

Small strain shear modulus and damping ratio of two unsaturated lateritic sandy clays

2020 ◽  
Author(s):  
C.W.W. Ng ◽  
Obed Takyi Bentil ◽  
Chao Zhou
Keyword(s):  
Shear Modulus ◽  
Damping Ratio ◽  
Small Strain ◽  
Resonant Column ◽  
Column Tests ◽  
Small Strain Shear Modulus ◽  
Confining Pressures ◽  
The Difference ◽  
Elastic Threshold ◽  
Scanning Electron

In this study, resonant column tests carried out to investigate the influence of suction on the shear modulus and damping ratio of two compacted lateritic sandy clays from Ghana (GL) and Nigeria (NL) are reported. Each type of soils was tested under two confining pressures and at three suctions. The microstructure of the soils was also studied through a scanning electron microscope. It is found that the effects of suction on maximum shear modulus (G<u><sub></u>0<u></sub></u>) are about 10% larger for GL than NL, mainly due to the existence of smaller aggregates in GL. Moreover, an increase in suction from 0 to 300 kPa for both soils resulted in a lower elastic threshold shear strain, different from the behaviour of other soils reported in the literature. The uniqueness of lateritic soils is likely attributed to their high sesquioxide content and much larger aggregates, which shrink upon an increase in suction. Drying of specimens from 0 to 300 kPa resulted in an increase of about 22% and 100% in initial damping ratio (D<sub>0</sub>) for GL and NL, respectively. The difference in D<sub>0</sub> for GL and NL and is attributed to larger aggregation of NL because of its higher iron sesquioxide content, leading to more cladding

scholarly journals Evaluation of Dynamic Properties of Sodium-Alginate-Reinforced Soil Using A Resonant-Column Test

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2743
Author(s):  
Seongnoh Ahn ◽  
Jae-Eun Ryou ◽  
Kwangkuk Ahn ◽  
Changho Lee ◽  
Jun-Dae Lee ◽  
...  
Keyword(s):  
Shear Modulus ◽  
Sodium Alginate ◽  
Shear Failure ◽  
Dynamic Properties ◽  
Damping Ratio ◽  
Reinforced Soil ◽  
Resonant Column ◽  
Column Test ◽  
Alginate Solution ◽  
Resonant Column Test

Ground reinforcement is a method used to reduce the damage caused by earthquakes. Usually, cement-based reinforcement methods are used because they are inexpensive and show excellent performance. Recently, however, reinforcement methods using eco-friendly materials have been proposed due to environmental issues. In this study, the cement reinforcement method and the biopolymer reinforcement method using sodium alginate were compared. The dynamic properties of the reinforced ground, including shear modulus and damping ratio, were measured through a resonant-column test. Also, the viscosity of sodium alginate solution, which is a non-Newtonian fluid, was also explored and found to increase with concentration. The maximum shear modulus and minimum damping ratio increased, and the linear range of the shear modulus curve decreased, when cement and sodium alginate solution were mixed. Addition of biopolymer showed similar reinforcing effect in a lesser amount of additive compared to the cement-reinforced ground, but the effect decreased above a certain viscosity because the biopolymer solution was not homogeneously distributed. This was examined through a shear-failure-mode test.

scholarly journals Multi-Scale Study of The Small-Strain Damping Ratio of Fiber-Sand Composites

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2476
Author(s):  
Haiwen Li ◽  
Sathwik S. Kasyap ◽  
Kostas Senetakis
Keyword(s):  
Dynamic Properties ◽  
Wide Spectrum ◽  
Damping Ratio ◽  
Polypropylene Fiber ◽  
Small Strain ◽  
Treatment Method ◽  
Fiber Content ◽  
Polypropylene Fibers ◽  
Test Results ◽  
Fiber Reinforced

The use of polypropylene fibers as a geosynthetic in infrastructures is a promising ground treatment method with applications in the enhancement of the bearing capacity of foundations, slope rehabilitation, strengthening of backfills, as well as the improvement of the seismic behavior of geo-systems. Despite the large number of studies published in the literature investigating the properties of fiber-reinforced soils, less attention has been given in the evaluation of the dynamic properties of these composites, especially in examining damping characteristics and the influence of fiber inclusion and content. In the present study, the effect of polypropylene fiber inclusion on the small-strain damping ratio of sands with different gradations and various particle shapes was investigated through resonant column (macroscopic) experiments. The macroscopic test results suggested that the damping ratio of the mixtures tended to increase with increasing fiber content. Accordingly, a new expression was proposed which considers the influence of fiber content in the estimation of the small-strain damping of polypropylene fiber-sand mixtures and it can be complementary of damping modeling from small-to-medium strains based on previously developed expressions in the regime of medium strains. Additional insights were attempted to be obtained on the energy dissipation and contribution of fibers of these composite materials by performing grain-scale tests which further supported the macroscopic experimental test results. It was also attempted to interpret, based on the grain-scale tests results, the influence of fiber inclusion in a wide spectrum of properties for fiber-reinforced sands providing some general inferences on the contribution of polypropylene fibers on the constitutive behavior of granular materials.

A Study on Dynamic Properties of Cement-Stabilized Soils

2011 ◽  
Vol 243-249 ◽  
pp. 2050-2054 ◽  
Author(s):  
Pei Hsun Tsai ◽  
Sheng Huoo Ni
Keyword(s):  
Shear Modulus ◽  
Dynamic Properties ◽  
Damping Ratio ◽  
Confining Pressure ◽  
Test Results ◽  
Resonant Column Test ◽  
Stabilized Soil ◽  
Shearing Strain ◽  
Relationship Of ◽  
The Relationship

In this paper the dynamic property (shear modulus and damping ratio) of cement-stabilized soil is studied with using the resonant column test. The amount of cement admixed, the magnitude of confining pressure, and shearing strain amplitude are the parameters considered. Test results show that the maximum shear modulus of cement-stabilized soil increases with increasing confining pressure, the minimum damping ratio decreases with increasing confining pressure. The shear modulus of cement-stabilized soil decreases with increasing shearing strain while the damping ratio increases with increasing shearing strain. In the paper the relationship of shear modulus versus shearing strain is fitted into the Ramberg-Osgood equations using regression analysis.

scholarly journals Characterization of the Dynamic Properties of Clay–Gravel Mixtures at Low Strain Level

2020 ◽  
Vol 12 (4) ◽  
pp. 1616 ◽  
Author(s):  
Xianwen Huang ◽  
Aizhao Zhou ◽  
Wei Wang ◽  
Pengming Jiang
Keyword(s):  
Shear Modulus ◽  
Shear Strain ◽  
Mechanical Performance ◽  
Dynamic Properties ◽  
Damping Ratio ◽  
Confining Pressure ◽  
Strain Level ◽  
Dynamic Shear Modulus ◽  
Dynamic Shear ◽  
Gravel Content

In order to support the dynamic design of subgrade filling engineering, an experiment on the dynamic shear modulus (G) and damping ratio (D) of clay–gravel mixtures (CGMs) was carried out. Forty-two groups of resonant column tests were conducted to explore the effects of gravel content (0%, 10%, 20%, 30%, 40%, 50%, and 60%, which was the mass ratio of gravel to clay), gravel shape (round and angular gravels), and confining pressure (100, 200, and 300 kPa) on the dynamic shear modulus, and damping ratio of CGMs under the same compacting power. The test results showed that, with the increase of gravel content, the maximum dynamic shear modulus of CGMs increases, the referent shear strain increases linearly, and the minimum and maximum damping ratios decrease gradually. In CGMs with round gravels, the maximum dynamic shear modulus and the maximum damping ratio are greater, and the referent shear strain and the minimum damping ratio are smaller, compared to those with angular gravels. With the increase of confining pressure, the maximum dynamic shear modulus and the referent shear strain increase nonlinearly, while the minimum and maximum damping ratios decrease nonlinearly. The predicting equation for the dynamic shear modulus and the damping ratio of CGMs when considering confining pressure, gravel content, and shape was established. The results of this research may put forward a solid foundation for engineering design considering low-strain-level mechanical performance.

Measurement of small-strain shear modulus Gmax of dry and saturated sands by bender element, resonant column, and torsional shear tests

2008 ◽  
Vol 45 (10) ◽  
pp. 1426-1438 ◽  
Author(s):  
Jun-Ung Youn ◽  
Yun-Wook Choo ◽  
Dong-Soo Kim
Keyword(s):  
Shear Modulus ◽  
Shear Wave ◽  
Shear Wave Velocity ◽  
Small Strain ◽  
Resonant Column ◽  
Test Results ◽  
Bender Element ◽  
Small Strain Shear Modulus ◽  
Torsional Shear ◽  
Saturated Sands

The bender element method is an experimental technique used to determine the small-strain shear modulus (Gmax) of a soil by measuring the velocity of shear wave propagation through a sample. Bender elements have been applied as versatile transducers to measure the Gmax of wet and dry soils in various laboratory apparatuses. However, certain aspects of the bender element method have yet to be clearly specified because of uncertainties in determining travel time. In this paper, the bender element (BE), resonant column (RC), and torsional shear (TS) tests were performed on the same specimens using the modified Stokoe-type RC and TS testing equipment. Two clean sands, Toyoura and silica sands, were tested at various densities and mean effective stresses under dry and saturated conditions. Based on the test results, methods of determining travel time in BE tests were evaluated by comparing the results of RC, TS, and BE tests. Also, methods to evaluate Gmax of saturated sands from the shear-wave velocity (Vs) obtained by RC and BE tests were investigated by comparing the three sets of test results. Biot’s theory on frequency dependence of shear-wave velocity was adopted to consider dispersion of a shear wave in saturated conditions. The results of this study suggest that the total mass density, which is commonly used to convert Gmax from the measured Vs in saturated soils, should not be used to convert Vs to Gmax when the frequency of excitation is 10% greater than the characteristic frequency (fc) of the soil.

Sign in / Sign up

Export Citation Format

Share Document