scholarly journals Phenomena of Removal of Crystal Violet from Wastewater Using Khulays Natural Bentonite

2020 ◽  
Vol 2020 ◽  
pp. 1-8 ◽  
Author(s):  
Saad Al-Shahrani
Keyword(s):  
Operating Systems ◽  
Crystal Violet ◽  
Freundlich Isotherm ◽  
Adsorption Behaviour ◽  
Solution Ph ◽  
Concentration Time ◽  
Batch Technique ◽  
Isotherm Adsorption ◽  
Pseudo Second Order ◽  
Initial Improvement

The study investigates the phenomena involved in the crystal violet (CV) removal using the Khulays natural bentonite from the wastewater. The batch technique was utilized for performing the adsorption experiments. The operating systems were used for the investigation of the adsorption behaviour in the study, which included the initial CV concentration, time taken for shaking, the dosage of adsorbent, and the initial solution pH. The Freundlich isotherm framework and the Langmuir data were assessed in the experiment. The study outcome revealed that the equilibrium in the study was reached when shaking takes place for about 40 minutes. Additionally, the data of the sorption revealed that the enhancement of the CV concentration at the start mitigates the percentage of the CV removal as a result of which saturation integration in the Khulays bentonite dye occurs. The initial improvement in the solution pH led to improved CV adsorption. The data achieved at the isotherm adsorption were found adequate with the frameworks of Freundlich isotherm and Langmuir. Along with it, the model of pseudo-second-order kinetics was used to exhibit the adsorption of crystal violet with the Khulays natural bentonite. The Khulays natural bentonite adsorption of CV was demonstrated by the thermodynamic data exhibiting its spontaneous as well as endothermic nature. The study concludes that basic dyes can be effectively removed from the wastewater by the use of Khulays natural bentonite.

scholarly journals Synthesis of acid treated carbonized mandarin peel for purification of copper

2020 ◽  
Vol 15 (2) ◽  
pp. 460-471
Author(s):  
T. Unugul ◽  
F. U. Nigiz
Keyword(s):  
Contact Time ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Adsorption Kinetic ◽  
Adsorption Behaviour ◽  
Solution Ph ◽  
Copper Adsorption ◽  
Adsorbent Dosage ◽  
Mandarin Peel ◽  
Pseudo Second Order

Abstract In this study; acid treated carbonized mandarin peel (CMP) adsorbent was prepared and the adsorption behaviour of the adsorbent for copper removal was investigated. In the adsorption studies the effects of initial metal concentration, solution pH, adsorbent dosage and contact time on the removal were investigated. As a result; the highest removal of 100% was achieved when the copper concentration in water was 5 mg/L and the adsorbent dosage was 3.75 g/L at a solution pH of 7. Isotherm studies were also done and the appropriate isotherm was obtained as the Freundlich isotherm. According to the kinetic studies, the copper adsorption onto CMP adsorbent was adopted to the pseudo-second-order adsorption kinetic. After HCl regeneration, the adsorbent maintained 94% of its activity.

scholarly journals The Removal of Uranium and Thorium from Their Aqueous Solutions by 8-Hydroxyquinoline Immobilized Bentonite

Minerals ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 626 ◽  
Author(s):  
Salah ◽  
Gaber ◽  
Kandil
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Langmuir Isotherm ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Solution Ph ◽  
X Ray ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The sorption of uranium and thorium from their aqueous solutions by using 8-hydroxyquinoline modified Na-bentonite (HQ-bentonite) was investigated by the batch technique. Na-bentonite and HQ-bentonite were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier Transform Infrared (FTIR) spectroscopy. Factors that influence the sorption of uranium and thorium onto HQ-bentonite such as solution pH, contact time, initial metal ions concentration, HQ-bentonite mass, and temperature were tested. Sorption experiments were expressed by Freundlich and Langmuir isotherms and the sorption results demonstrated that the sorption of uranium and thorium onto HQ-bentonite correlated better with the Langmuir isotherm than the Freundlich isotherm. Kinetics studies showed that the sorption followed the pseudo-second-order kinetic model. Thermodynamic parameters such as ΔH°, ΔS°, and ΔG° indicated that the sorption of uranium and thorium onto HQ-bentonite was endothermic, feasible, spontaneous, and physical in nature. The maximum adsorption capacities of HQ-bentonite were calculated from the Langmuir isotherm at 303 K and were found to be 63.90 and 65.44 for U(VI) and Th(IV) metal ions, respectively.

Removal of fluoride from aqueous solution by adsorption onto Kanuma mud

2010 ◽  
Vol 62 (8) ◽  
pp. 1888-1897 ◽  
Author(s):  
Nan Chen ◽  
Zhenya Zhang ◽  
Chuanping Feng ◽  
Miao Li ◽  
Rongzhi Chen ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Fluoride Concentration ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Solution Ph ◽  
Intra Particle Diffusion ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Solid Liquid Interface ◽  
Solid Liquid

Kanuma mud, a geomaterial, is used as an adsorbent for the removal of fluoride from water. The influences of contact time, solution pH, adsorbent dosage, initial fluoride concentration and co-existing ions were investigated by batch equilibration studies. The rate of adsorption was rapid with equilibrium being attained after about 2 h, and the maximum removal of fluoride was obtained at pH 5.0–8.0. The Freundlich isotherm model was found to represent the measured adsorption data well. The negative value of the thermodynamic parameter ΔG suggests the adsorption of fluoride by Kanuma mud was spontaneous, the endothermic nature of adsorption was confirmed by the positive ΔH value. The negative ΔS value for adsorbent denoted decreased randomness at the solid/liquid interface. The adsorption process using Kanuma mud followed the pseudo-second-order kinetic model. Fluoride uptake by the Kanuma mud was a complex process and intra-particle diffusion played a major role in the adsorption process. It was found that adsorbed fluoride could be easily desorbed by washing the adsorbent with a solution of pH 12. This indicates the material could be easily recycled.

Equilibrium and Kinetics Studies for Adsorption of Cu(II) from Aqueous Solution by Modified Phosphogypusum

2012 ◽  
Vol 518-523 ◽  
pp. 369-375 ◽  
Author(s):  
Yue Hong Yang ◽  
Dun Tao Shu ◽  
Ting Dong Fu ◽  
Huai Yu Zhang
Keyword(s):  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Wet Process ◽  
Removal Capacity ◽  
Adsorbate Concentration ◽  
Equilibrium And Kinetics ◽  
Pseudo Second Order ◽  
Best Fit

The purpose of this study was to investigate the adsorption of Cu(II) on phosphogypsum, a waste material from the manufacture of phosphoric acid by wet process. The removal capacity of phosphogypsum for Cu(II) ions was studied as a function of solution pH, contact time, adsorbent dosage and adsorbate concentration. Before batch adsorption study, phosphogypsum was pre-conditioned by calcine without water. The Langmuir and Freundlich theories were used to describe the Cu(II) adsorption process, and the Freundlich isotherm showed the best fit to the process. The adsorptions of Cu(II) followed pseudo-second-order kinetics. Maximum adsorption capacity of lime-preconditioned phosphogypsum was found to be 2.824 mg/g. The results showed that the phoshogypsum is a suitable adsorbent for the removal of Cu(II) ions from aqueous solutions.

scholarly journals Adsorption Behaviour of La(III) and Eu(III) Ions from Aqueous Solutions by Hydroxyapatite: Kinetic, Isotherm, and Thermodynamic Studies

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
F. Granados-Correa ◽  
J. Vilchis-Granados ◽  
M. Jiménez-Reyes ◽  
L. A. Quiroz-Granados
Keyword(s):  
Aqueous Solutions ◽  
Metal Ion ◽  
Low Cost ◽  
Intraparticle Diffusion ◽  
Ion Concentration ◽  
Adsorption Behaviour ◽  
Freundlich Model ◽  
Adsorption Data ◽  
Isotherm Adsorption ◽  
Pseudo Second Order

The hydroxyapatite was successfully synthesized, characterized, and used as an alternative low-cost adsorbent material to study the adsorption behavior of La(III) and Eu(III) ions from nitrate aqueous solutions as a function of contact time, initial metal ion concentration, pH, and temperature by using a bath technique. The kinetic data correspond very well to the pseudo-second-order equation, and in both cases the uptake was affected by intraparticle diffusion. Isotherm adsorption data were well fitted by the Freundlich model equation with1/n>1, indicating a multilayer and cooperative-type adsorption. Thermodynamic parameters for the adsorption systems were determinated at 293, 303, 313, and 323 K. These parameters show that adsorptions of La(III) and Eu(III) ions on hydroxyapatite are endothermic and spontaneous processes. The adsorption was found to follow the order Eu(III) > La(III) and is dependent on ion concentration, pH, and temperature.

scholarly journals Banana Fibers as Sorbent for Removal of Acid Green Dye from Water

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Siti Kartina Abdul Karim ◽  
Soh Fong Lim ◽  
S. N. David Chua ◽  
Shanti Faridah Salleh ◽  
Puong Ling Law
Keyword(s):  
Freundlich Isotherm ◽  
Sorption Process ◽  
Agitation Speed ◽  
Second Order ◽  
Order Kinetic ◽  
Solution Ph ◽  
Banana Fiber ◽  
Banana Fibers ◽  
Pseudo Second Order ◽  
Banana Leaves

In this study, banana fibers extracted from banana leaves, stem, and stalk were used to remove acid green dye from aqueous solution. Three initial concentrations (750, 1000, and 1500 ppm) were chosen to determine the kinetic characteristics of the banana fiber sorbents at 25°C, agitation speed of 200 rpm, and total contact time of 3 hours. The pseudo-first-order, pseudo-second-order, and Dunwald-Wagner kinetic models were applied to the experimental kinetic data. For isotherm study, the batch experiments were performed at 25°C, initial pH 2, agitation speed of 200 rpm, and initial concentrations between 100 and 2000 ppm. The experimental data was fitted to the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherms. The equilibrium was achieved in less than 90 minutes. The removal of the acid green dye was found to be following closely the pseudo-second-order kinetic model. For equilibrium study, the Freundlich isotherm was found to fit well with adsorption of acid green dye on the banana leaves, stem, and stalk sorbents. The calculated mean free energy of 4–11 J/mol indicated that the sorption process was mostly physical in nature. Experimental results also showed the adsorption performance is greatly affected by the initial solution pH.

scholarly journals Itaconic acid-modified layered double hydroxide as a ‎novel adsorbent for effective removal of Congo red from aqueous solutions

2021 ◽  
Author(s):  
Mohammad Dinari ◽  
Shirin Shabani
Keyword(s):  
Layered Double Hydroxide ◽  
Itaconic Acid ◽  
Congo Red ◽  
Aqueous Media ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Order Kinetic ◽  
Solution Ph ◽  
Pseudo Second Order ◽  
Double Hydroxide

Abstract Herein, we report the synthesis of Cu-Ca-Al/NO3-based layered double hydroxide through co-precipitation methodology. The prepared layered double hydroxide was then modified with itaconic acid. The physicochemical properties of the prepared materials were studied using Fourier transform-infrared spectroscopy, scanning electron microscopy, X-ray diffraction analysis, thermogravimetric analysis, and nitrogen adsorption/desorption technique. The prepared materials were then applied as novel adsorbents for the removal of Congo red as a model of an anionic dye from aqueous media. To reach maximum adsorption, the effect of parameters including sample solution pH, adsorbent amount, contact time, and initial concentration of Congo red on the adsorption process was investigated. Kinetic studies were also conducted to study the mechanism of adsorption. In this regard, the kinetic models of pseudo-first-order, pseudo-second-order, Elovich, and intra-particle diffusion were studied. The results showed that the adsorption of Congo red onto Cu-Ca-Al-LDH and LDH-ITA adsorbents followed the pseudo-second-order kinetic model. To evaluate the equilibrium adsorption data, different isotherms including Langmuir, Freundlich, and Dubinin-Radushkevich were also applied. The data revealed that the Freundlich isotherm provided the best fit with the equilibrium data of both adsorbents. Maximum adsorption capacities of 81 and 84 mg g− 1 were obtained using Cu-Ca-Al-LDH and LDH-ITA adsorbents, respectively.

scholarly journals Mass-transfer processes in the adsorption of crystal violet by activated carbon derived from pomegranate peels: Kinetics and thermodynamic studies

2020 ◽  
Vol 15 ◽  
pp. 155892502091984
Author(s):  
Moussa Abbas ◽  
Zahia Harrache ◽  
Mohamed Trari
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Crystal Violet ◽  
Agitation Speed ◽  
Second Order ◽  
Point Of Zero Charge ◽  
Order Kinetic ◽  
Solution Ph ◽  
Pseudo Second Order ◽  
Adsorbent Dose

This study investigates the potential use of activated carbon, prepared from pomegranate peels, as an adsorbent activated using H3PO4 and its ability to remove crystal violet from an aqueous solution. The adsorbent was characterized by the Brunauer–Emmett–Teller method (specific surface area: 51.0674 m2 g−1) and point of zero charge (pHPZC = 5.2). However, some examined factors were found to have significant impacts on the adsorption capacity of activated carbon derived from pomegranate peels such as the initial dye concentration (5–15 mg L−1), solution pH (2–14), adsorbent dose (1–8 g L−1), agitation speed (100–700 r/min), and temperature (298–338 K). The best adsorption capacity was found at pH 11 with an adsorbent dose of 1 g L−1, an agitation speed at 400 r/min, and a contact time of 45 min. The adsorption mechanism of crystal violet onto activated carbon derived from pomegranate peels was studied using the pseudo-first-order, pseudo-second-order, Elovich, and Webber–Morris diffusion models. The adsorption kinetics were found to rather follow a pseudo-second order kinetic model with a determination coefficient ( R2) of 0.999. The equilibrium adsorption data for crystal violet adsorbed onto activated carbon derived from pomegranate peels were analyzed by the Langmuir, Freundlich, Elovich, and Temkin models. The results indicate that the Langmuir model provides the best correlation with qmax capacities of 23.26 and 76.92 mg g−1 at 27°C and 32°C, respectively. The adsorption isotherms at different temperatures have been used for the determination of thermodynamic parameters like the free energy, enthalpy, and entropy to predict the nature of adsorption process. The negative values Δ G0 (−5.221 to −1.571 kJ mol−1) and Δ H0 (−86.141 kJ mol−1) indicate that the overall adsorption is spontaneous and exothermic with a physisorption process. The adsorbent derived from pomegranate peels was found to be very effective and suitable for the removal of reactive dyes from aqueous solutions, due to its availability, low-cost preparation, and good adsorption capacity.

scholarly journals Adsorption of Crystal Violet Dye onto Tamarind Seed Powder

2010 ◽  
Vol 7 (3) ◽  
pp. 975-984 ◽  
Author(s):  
Himanshu Patel ◽  
R. T. Vashi
Keyword(s):  
Crystal Violet ◽  
Adsorption Mechanism ◽  
Freundlich Isotherm ◽  
Tamarind Seed ◽  
Crystal Violet Dye ◽  
Adsorption Data ◽  
Equilibrium Data ◽  
Intra Particle Diffusion ◽  
Pseudo Second Order ◽  
Shell Powder

The present investigation describes adsorption of crystal violet dye from its aqueous solution onto tamarind (Tamarindus indica) fruit shell powder. Initial concentration, agitation speed and pH with various temperature have been studied, in which pH was found to be most effective. The adsorption data were mathematically analyzed using adsorption isotherm like Freundlich and Langmuir isotherm to study adsorption mechanism of crystal violet onto this seed powder. Freundlich isotherm was found to be most applicable. The equilibrium data were applied to intra-particle diffusion and adsorption kinetics. The reaction was found to be pseudo second order.

Study of the kinetics and the adsorption isotherm of cadmium(II) from aqueous solution using green algae (Ulva lactuca) biomass

2015 ◽  
Vol 72 (9) ◽  
pp. 1505-1515 ◽  
Author(s):  
H. Asnaoui ◽  
A. Laaziri ◽  
M. Khalis
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Ulva Lactuca ◽  
Order Kinetic ◽  
Solution Ph ◽  
Algae Biomass ◽  
Pseudo Second Order

Batch experiments were conducted to study the adsorption of hazardous cadmium onto low-cost algae biomass in aqueous solution with respect to concentration of adsorbate, adsorbent dosage, contact time, solution pH and temperature. Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The activation energy of adsorption was also evaluated for the adsorption of cadmium onto Ulva lactuca biomass. Experimental data were tested in terms of biosorption kinetics using pseudo-first-order and pseudo-second-order kinetic models. The results showed that the biosorption processes of Cd(II) followed well pseudo-second-order kinetics. Langmuir and Freundlich models were applied to describe the biosorption isotherm of the metal ions by Ulva lactuca biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The biosorption capacity of Ulva lactuca biomass for cadmium was found to be 3.02 mg/g at pH 5.60 min equilibrium time and 20 °C. The mean free energy which was calculated was 6.24 kJ/mol for Cd(II) biosorption, which shows that the adsorption is physical. The calculated thermodynamic parameters (ΔG0, ΔH0 and ΔS0) showed that the biosorption of Cd(II) onto Ulva lactuca biomass was feasible, spontaneous and exothermic under examined conditions. The results indicate that algae Ulva lactuca could be employed as a low-cost material for the removal of metal ions from aqueous solution.

Sign in / Sign up

Export Citation Format

Share Document