scholarly journals Experimental Study on Dynamic Compression Characteristics of Red Sandstone under Wetting-Drying Cycles

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Bin Du ◽  
Haibo Bai ◽  
Minglei Zhai ◽  
Shixin He
Keyword(s):  
Compressive Strength ◽  
Fractal Dimension ◽  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Degradation Mechanism ◽  
Impact Compression ◽  
Red Sandstone ◽  
Dynamic Compressive Strength ◽  
The Impact

To study the influence of wetting-drying cycles on dynamic mechanical properties of rock masses, the impact compression tests of red sandstone samples were carried out by using a split Hopkinson pressure bar (SHPB) apparatus with a diameter of 50 mm. The results showed that under the same number of wetting-drying cycles, the dynamic compressive strength of red sandstone increased exponentially with the strain rate, and the sensitivity of the strain rate decreased with the increase of wetting-drying cycles. The deterioration effect of wetting-drying cycles was significant, and the dynamic and static compressive strength decreased with the increase of wetting-drying cycles; the higher the strain rate, the stronger the sensitivity to wetting-drying cycles. Besides, the influence of wetting-drying cycles and strain rate was comprehensively studied, and the equation of dynamic compressive strength of red sandstone was obtained. After different wetting-drying cycles, the fractal characteristics of red sandstone dynamic fragmentation were obvious, and the fractal dimension was 2.02–2.80, and the fractal dimension increased logarithmically with the strain rate. Finally, the internal microstructure of red sandstone after different wetting-drying cycles was analyzed, and the degradation mechanism of the rock by the cycles was discussed.

scholarly journals Dynamic Compression Damage Energy Consumption and Fractal Characteristics of Shale

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Guoliang Yang ◽  
Jingjiu Bi ◽  
Linian Ma
Keyword(s):  
Fractal Dimension ◽  
Energy Consumption ◽  
Energy Dissipation ◽  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Fractal Theory ◽  
Dissipated Energy ◽  
Impact Tests ◽  
The Impact

Studying the relationship between energy consumption and crushed size of shale under different loading conditions is the key to efficient shale cracking. The split Hopkinson pressure bar system was used to study the dynamic mechanical properties of shale under parallel- and vertical-bedding loading, and energy dissipation in the impact tests was calculated. Relationships between the average crushed size of shale fracture products and energy dissipation and between the fractal dimension and dissipated energy were studied using fractal theory. The experimental results showed that the dynamic compressive strength of shale under parallel- and vertical-bedding conditions had an obvious positive correlation with the strain rate. Dissipative energy of the shale samples under loading in both directions increased with the increase of strain rate. The increase of the strain rate enhanced crushing of the sample. The vertical-bedding shale samples had stronger ability to absorb energy and more internal crack propagation. Dissipative energies of the shale samples in the parallel- and vertical-bedding impact tests were positively related to the fractal dimension. The fractal dimension increased with the increase of dissipative energy during sample failure; with further increase in the dissipative energy, its effect on the change of fractal dimension gradually weakened.

scholarly journals Breakage Characterization of Magnetite under Impact Loads and Cyclic Impact Loading

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5459
Author(s):  
Liang Si ◽  
Yijun Cao ◽  
Guixia Fan
Keyword(s):  
Fractal Dimension ◽  
Strain Rate ◽  
Intergranular Fracture ◽  
Split Hopkinson Pressure Bar ◽  
Fractal Theory ◽  
Fracture Morphology ◽  
Impact Loads ◽  
Impact Compression ◽  
Cyclic Impact ◽  
The Impact

A series of impact compression tests were conducted to study the breakage characteristics of magnetite, as well as the impact pressure on its strain rate and dynamic compressive strength. The dynamic mechanical properties and fragmentation size distribution of magnetite under diverse impact loads and cyclic impact were investigated, with fractal theory as a basis and split Hopkinson pressure bar (SHPB). Breakage methods were also employed to analyze the fracture morphology of magnetite. According to the result, the fractal dimension can reflect the distribution of fragments in various sizes. If the strain rate increases, the fractal dimension will be larger, the fragment size will be finer, and the fragmentation degree will be more influential. A micro-analysis of SEM images demonstrates that the fracture morphology is determined by mineral properties. Under low load cyclic impact, intergranular fracture is the main fractography. Besides, the intergranular fracture will be changed to a transgranular one as the impact load increases.

scholarly journals Dynamic Compressive Strength Tests of Corroded SFRC Exposed to Drying–Wetting Cycles with a 37 mm Diameter SHPB

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2267
Author(s):  
Hui Chen ◽  
Xiangqiang Zhou ◽  
Qiang Li ◽  
Rui He ◽  
Xin Huang
Keyword(s):  
Strain Rate ◽  
Steel Fiber ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Strain Curve ◽  
Fiber Reinforced Concrete ◽  
Impact Compression ◽  
Dynamic Increase Factor ◽  
Compression Performance ◽  
The Impact

This study focuses on the dynamic compression performance of corroded steel fiber-reinforced concrete (SFRC) exposed to drying–wetting chloride cycles by a 37 mm diameter split Hopkinson pressure bar (SHPB) system. Three steel fiber contents (0.5%, 1.0%, 2.0%, by volume) were incorporated into concrete, and samples were subjected to drying–wetting cycles for different corrosion durations (30 days, 60 days, 90 days) after 28 days age. The sample damage mode, stress–strain curve and the dynamic compression performance of corroded SFRC were compared with plain concrete. Through the experimental data, strain-rate effect, fiber reinforcement effect and the corrosion duration influence on the impact compression property of SFRC were identified. The dynamic increase factor results of these samples were compared with the existing models in previous published literature. An empirical dynamic increase factor profile characterization model considering fiber content, corrosion duration and strain-rate is proposed.

Effect of the Fine Recycled Aggregates on the Dynamic Compressive Behavior of Recycled Mortar

2020 ◽  
Vol 991 ◽  
pp. 62-69
Author(s):  
Sallehan Ismail ◽  
Mohamad Asri Abd Hamid ◽  
Zaiton Yaacob
Keyword(s):  
Compressive Strength ◽  
Strain Rate ◽  
Energy Absorption ◽  
Specific Energy ◽  
Split Hopkinson Pressure Bar ◽  
Recycled Aggregates ◽  
Fine Aggregate ◽  
Peak Strain ◽  
Specific Energy Absorption ◽  
The Impact

This study aims to investigate the dynamic behavior of recycled mortar under impact loading using a split Hopkinson pressure bar (SHPB). Several mortar mixtures were produced by adding various fine recycled aggregates (FRA) to the mixture in replacement percentages of 0%, 25%, 50%, 75%, and 100% of the natural fine aggregate (NFA). The effects of strain rate on compressive strength and specific energy absorption were obtained. Results show that the dynamic compressive strength and specific energy absorption of recycled mortar are highly strain rate dependent; specifically, they increase nearly linearly with the increase in peak strain rate. However, the compressive strength and specific energy absorption of recycled mortar are generally lower than those of NFA mortar (reference samples) under similar high strain rates. The findings of this research can help researchers and construction practitioners to ascertain the appropriate mix design procedure to optimize the impact strength properties of recycled mortar for protective structural application.

Experimental and Numerical Analysis of Qinling Mountain Engineered Rocks during Pulse-Shaped SHPB Test

2015 ◽  
Vol 16 (3-4) ◽  
pp. 165-171
Author(s):  
Shi Liu ◽  
Jinyu Xu
Keyword(s):  
Compressive Strength ◽  
Elastic Modulus ◽  
Strain Rate ◽  
Energy Absorption ◽  
Absorption Rate ◽  
Failure Modes ◽  
Dynamic Compression ◽  
Peak Strain ◽  
Compression Stress ◽  
Dynamic Compressive Strength

AbstractIn order to study the dynamic compression mechanical properties of engineering rock under high strain rate （100~102 S−1）loads, dynamic compression tests of three common engineering rocks (marble, sandstone and granite) taken from the Qinling Mountain are studied subjected to five different kinds of shock air pressure using Φ 100 mm split Hopkinson pressure bar test system improved with purple copper waveform shaper. The dynamic compression stress-strain curves, dynamic compressive strength, peak strain, energy absorption rate and elastic modulus of three rocks variation with strain rate are researched. The dynamic compression failure modes under different strain rates are analyzed. Then the three-dimensional numerical simulations of waveform shaper shaping effects and stress wave propagation in the SHPB tests are carried out to reproduce the test results. The research results show that the dynamic compression stress-strain curves show certain discreteness, and there is an obvious rebound phenomenon after the peak. With the increase in strain rate, the dynamic compressive strength, peak strain and energy absorption rate are all in a certain degree of increase, but the elastic modulus have no obvious change trend. Under the same strain rate, the dynamic compressive strength of granite is greatest while of sandstone is least. With the increase in strain rate, the margin of increase in peak strain and energy absorption rate of granite is greatest while of sandstone is least. The failure modes of the sample experience a developing process from outside to inside with the increase of strain rate.

scholarly journals Study on the Fractal Characteristics of the Pomegranate Biotite Schist under Impact Loading

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Jianguo Wang ◽  
Ting Zuo ◽  
Xianglong Li ◽  
Zihao Tao ◽  
Jun Ma
Keyword(s):  
Compressive Strength ◽  
Fractal Dimension ◽  
Energy Consumption ◽  
Energy Dissipation ◽  
Strain Rate ◽  
Power Relationship ◽  
Strain Rates ◽  
Biotite Schist ◽  
Fractal Characteristics ◽  
Dynamic Compressive Strength

In order to study the fractal characteristics of the pomegranate biotite schist under the effect of blasting loads, a one-dimensional SHPB impact test was carried out to test the dynamic compressive strength, damage morphology, fracture energy dissipation density, and other parameters of the rocks under different strain rates; besides, sieve tests were conducted to count the mass fractal characteristics of the crushed masses under different strain rates to calculate the fractal dimension of the crushed rock D . Finally, the relationships between fractal dimension and dynamic compressive strength, crushing characteristics, and energy dissipation characteristics were analysed. The results show that under different impact loads, the strain rate effect of the rock is significant and the dynamic compressive strength increases with the increasing strain rate, and they show a multiplicative power relationship. The higher the strain rate of the rock, the deeper the fragmentation and the higher the fractal dimension, and the fractal dimension and rock crushing energy density are multiplied by a power relationship. By performing the comparative analysis of the pomegranate biotite schist, a reasonable strain rate range of 78.75 s-1~82.51 s-1 and a reasonable crushing energy consumption density range of 0.78 J·cm-3~0.92 J·cm-3 were determined. This research provides a great reference for the analysis of dynamic crushing mechanism, crushing block size distribution, and crushing energy consumption of the roadway surrounding rock.

scholarly journals A Study of Impact Response and Its Numerical Study of Hybrid Polypropylene Fiber-Reinforced Concrete with Different Sizes

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Ninghui Liang ◽  
Ru Yan ◽  
Xinrong Liu ◽  
Peng Yang ◽  
Zuliang Zhong
Keyword(s):  
Compressive Strength ◽  
Constitutive Model ◽  
Strain Rate ◽  
Numerical Study ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Compressive Properties ◽  
Dynamic Compressive Strength ◽  
The Impact ◽  
Polypropylene Fiber Reinforced Concrete

Compressive properties of hybrid polypropylene fiber-reinforced concrete (HPFRC) with different sizes of polypropylene fibers (PPFs) under the impact load (101∼102/s) were tested by using a 74 mm diameter various cross-section split-Hopkinson pressure bar (SHPB), in which the fiber content of fine PPFs was 0.9 kg/m3 and that of coarse PPFs was 6.0 kg/m3. The effect of strain rate and PPF hybridization on the impact characteristics of HPFRC was analyzed. It is found that dynamic compressive properties, including dynamic compressive strength, dynamic compressive strength increase factor (DCF), ultimate strain, and impact toughness, increased with the increase of strain rate. Meanwhile, both fine PPFs and coarse PPFs can enhance the impact strength of concrete, and an appropriate hybridization of two sizes of PPFs in concrete was more effective than the concrete reinforced with one size of PPF. Moreover, a modified constitutive model for HPFRC was proposed based on the Holmquist–Johnson–Cook (HJC) constitutive model. Then, the numerical study of SHPB tests for HPFRC was conducted based on the modified model, which showed that the modified HJC constitutive model could well describe the dynamic stress-strain relationship of HPFRC.

scholarly journals Study on the Rock Size Effect of Quasistatic and Dynamic Compression Characteristics

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Jun Zhou ◽  
Xiangrui Meng ◽  
Chongyan Liu ◽  
Zhixi Liu ◽  
Wensong Xu ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Size Effect ◽  
Strain Rate ◽  
Failure Modes ◽  
Rock Strength ◽  
Dynamic Compression ◽  
Testing Machine ◽  
Impact Testing ◽  
Dynamic Compressive Strength ◽  
Quasistatic Loading

To study the size effect of rock under quasistatic and dynamic conditions, the changes in compressive strength with the change in specimen size are measured. Cylindrical granite specimens with length-diameter ratios in the range of 0.5∼1 are used for uniaxial compression tests using an RMT testing machine and an SPHB impact testing machine. Under quasistatic loading, the failure modes of the specimens with different length-diameter ratios are different. The larger the size of the specimen structure is, the greater the probability of defects such as joints and micro cracks is and the smaller the influence of the specimen on the distribution of a three-dimensional stress state is. The rock strength decreases with increasing length-diameter ratio. Using the improved Weibull formula, the size of the specimen is expressed by the volume, and the calculated rock strength of different volumes is similar to the compressive strength from the quasistatic tests. Under dynamic loading, the dynamic compressive strengths of the specimens with different length-diameter ratios are similar, and the failure mode of the specimens is different from that under quasistatic loading. Soon after a crack appears in a specimen, the specimen splits. As the size of the specimens decreases, the fragments size to approach the millimeter scale. By improving the Weibull distribution formula and considering variation in strain rate caused by the size of the specimen, the dynamic compressive strength of rocks of different volumes is calculated by introducing the critical strain rate and related parameters, and the results are similar to the experimental dynamic compressive strength obtained. The improved Weibull formula based on the strength size effect can accurately describe the quasistatic and dynamic compressive strength laws.

Experimental Study on Impact Compression and Spliting of Granite

2011 ◽  
Vol 117-119 ◽  
pp. 62-66
Author(s):  
Wan Peng Wang ◽  
Yong Le Hu ◽  
Xing Tao Ren ◽  
Yi Bo Xiong ◽  
Liang Ying
Keyword(s):  
Tensile Strength ◽  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Failure Strain ◽  
Dynamic Compression ◽  
Tensile Failure ◽  
Experimental Result ◽  
Strain Rates ◽  
Dynamic Tensile Strength ◽  
Impact Compression

In order to systematically study on dynamic mechanics character of granite, impact compression experiments and impact flattened Brazilian disc specimens of granite have been investigated with modified split Hopkinson pressure bar (SHPB) experimental facility, curve about stress versus strain and other parameter at strain rates of 23.9/s～108.4/s were obtained from impact compression. The dynamic tensile strength and critical tensile failure strain at strain rates of 2.3/s～25.6/s were obtained from impact flattened Brazilian. The experimental result show that dynamic compression strength , elastic modulus and failure strain，dynamic tensile strength significantly increase comparing to quasi-static experiment, and the above mechanics parameter include dynamic strength etc will increase with strain rate increasing, granite have the character of impact harding and ductility enhancement. The failure degree of failure will increase with increasing strain rate under impact compression; the failure configurations of the specimens present an center splitting mode under impact flattened Brazilian experiments. Whether impact compression or impact splitting under strain rate including this paper ’s experiments, the relationship between the DIFC or DIFT and the logarithm of strain rate is linear.

SHPB Dynamic Experiment on Silica Fume Concrete

2013 ◽  
Vol 631-632 ◽  
pp. 771-775 ◽  
Author(s):  
Rong Jun Chen ◽  
Hong Wei Liu ◽  
Rui Zeng
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Silica Fume ◽  
High Speed ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Impact Resistance ◽  
Dynamic Mechanical Properties ◽  
Hopkinson Pressure Bar ◽  
The Impact

Dynamic mechanical properties of silica fume concrete in a number of strain rate under the conditions of dynamic compression mechanical properties subjected to various strain rates were studied, and gained the stress versus strain curves, details of an experimental investigation using 74 mm-diameter split Hopkinson pressure bar(SHPB) apparatus were presented. The results showed that: The admixture of silica fume concrete impact resistance, especially under the impact of the performance of high-speed has a very important influence, with the impact velocity increased, the strain rate increase, and its impact more obvious.

Sign in / Sign up

Export Citation Format

Share Document