scholarly journals Evaluation of the Physical Performance and Working Mechanism of Asphalt Containing a Surfactant Warm Mix Additive

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Jingtao Shi ◽  
Weiyu Fan ◽  
Tihong Wang ◽  
Pinhui Zhao ◽  
Fa Che
Keyword(s):  
Contact Angle ◽  
Spectral Analysis ◽  
Surface Energy ◽  
Asphalt Mixtures ◽  
Polar Component ◽  
Zero Shear Viscosity ◽  
Working Mechanism ◽  
Water Contact ◽  
Temperature Characteristics ◽  
Physical Blending

This paper analyzes the influence of a surfactant warm mix additive on unmodified asphalt’s conventional performance, viscosity-temperature characteristics, surface energy, and spreading performance on aggregate surfaces. The effect of the additive on asphalt’s microstructure was explored by infrared (IR) spectral analysis. The results show the additive has little influence on the penetration, softening point, ductility, and viscosity-temperature characteristics of asphalt; this suggests that the additive does not work by lowering viscosity. The additive can reduce the zero-shear viscosity of asphalt, and adding too much can reduce antirutting performance. The additive also increases the asphalt’s surface energy and the asphalt-water contact angle, while the polar component of surface energy decreases. The additive improves the spreading performance of asphalt on aggregate surfaces and reduces the asphalt-aggregate contact angle; the lower the temperature, the greater the reduction. IR spectral analysis shows that the additive does not react with asphalt—only physical blending occurs. The addition of a surfactant warm mix additive to asphalt allows asphalt mixtures to be more easily mixed and compacted at lower temperatures, thereby saving energy.

Addition of Cellulose Nanofibers to Control Surface Roughness for Hydrophobic Ceramic Coatings

2021 ◽  
Vol 21 (8) ◽  
pp. 4492-4497
Author(s):  
Eun Ae Shin ◽  
Gye Hyeon Kim ◽  
Jeyoung Jung ◽  
Sang Bong Lee ◽  
Chang Kee Lee
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Surface Energy ◽  
Water Contact Angle ◽  
Ceramic Coating ◽  
Cellulose Nanofibers ◽  
Ceramic Coatings ◽  
Coating Material ◽  
Textured Surface ◽  
Water Contact

Hydrophobic ceramic coatings are used for a variety of applications. Generally, hydrophobic coating surfaces are obtained by reducing the surface energy of the coating material or by forming a highly textured surface. Reducing the surface energy of the coating material requires additional costs and processing and changes the surface properties of the ceramic coating. In this study, we introduce a simple method to improve the hydrophobicity of ceramic coatings by implementing a textured surface without chemical modification of the surface. The ceramic coating solution was first prepared by adding cellulose nanofibers (CNFs) and then applied to a polypropylene (PP) substrate. The surface roughness increased as the amount of added CNFs increased, increasing the water contact angle of the surface. When the amount of CNFs added was corresponding to 10% of the solid content, the surface roughness average of the area was 43.8 μm. This is an increase of approximately 140% from 3.1 μm (the value of the surface roughness of the surface without added CNFs). In addition, the water contact angle of the coating with added CNF increased to 145.0°, which was 46% higher than that without the CNFs. The hydrophobicity of ceramic coatings with added CNFs was better because of changes in the surface topography. After coating and drying, the CNFs randomly accumulated inside the ceramic coating layer, forming a textured surface. Thus, hydrophobicity was improved by implementing a rugged ceramic surface without revealing the surface of the CNFs inside the ceramic layer.

Preparation of Hydrophobic Nylon Fabric

2016 ◽  
Vol 11 (1) ◽  
pp. 155892501601100
Author(s):  
Jinmei Du ◽  
Lulu Zhang ◽  
Jing Dong ◽  
Ying Li ◽  
Changhai Xu ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Surface Energy ◽  
Water Contact Angle ◽  
Sem Images ◽  
Water Contact ◽  
Carboxyl Content ◽  
Factors Affecting ◽  
Nylon Fabric ◽  
Butanetetracarboxylic Acid

Surface roughness and surface energy are two important factors affecting the hydrophobicity of nylon fabric. In this study, nylon fabric was treated for hydrophobicity with tetrabutyltitanate (TBT) and octadecylamine (OA) which were respectively responsible for increasing surface roughness and reducing surface energy. In order to enhance the hydrophobicity, In order to further enhance hydrophobicity by increasing available reactive sites, 1,2,3,4–butanetetracarboxylic acid (BTCA) was applied as a pretreatment to the nylon fabric It was found that the carboxyl content of nylon was increased by the BTCA pretreatment. SEM images showed that the TBT treatment produced small particles on nylon fabric which made surface rough. The water contact angle of nylon fabric treated with BTCA, TBT and OA was measured to be 134°, which was much greater than the water contact angle of nylon fabric treated only with OA. This indicated that the surface roughness resulting from the TBT treatment played an important role in improving hydrophobicity of the treated nylon fabric. The resistance to water penetration and the repellency of water spray of nylon fabric treated with BTCA, TBT and OA were respectively measured to be 27.64 mbar and 85 out of 100.

scholarly journals Superhydrophobic organosilicon-based coating system by a novel ultravoilet-curable method

2017 ◽  
Vol 7 ◽  
pp. 184798041770279 ◽  
Author(s):  
Baojiang Liu ◽  
Taizhou Tian ◽  
Jinlong Yao ◽  
Changgen Huang ◽  
Wenjun Tang ◽  
...  
Keyword(s):  
Contact Angle ◽  
Surface Energy ◽  
Silica Nanoparticles ◽  
Water Contact Angle ◽  
Cotton Fabric ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Water Repellent ◽  
Step Method ◽  
Water Contact

A robust superhydrophobic organosilica sol-gel-based coating on a cotton fabric substrate was successfully fabricated via a cost-effective one-step method. The coating was prepared by modification of silica nanoparticles with siloxane having long alkyl chain that allow to reduce surface energy. The coating on cotton fabric exhibited water contact angle of 151.6°. The surface morphology was evaluated by scanning electron microscopy, and surface chemical composition was measured with X-ray photoelectron spectroscopy. Results showed the enhanced superhydrophobicity that was attributed to the synergistic effect of roughness created by the random distribution of silica nanoparticles and the low surface energy imparted of long-chain alkane siloxane. In addition, the coating also showed excellent durability against washing treatments. Even after washed for 30 times, the specimen still had a water contact angle of 130°, indicating an obvious water-repellent property. With this outstanding property, the robust superhydrophobic coating exhibited a prospective application in textiles and plastics.

Surface Modification of Calcium Hydroxyfluor Carbonate Apatites by Bisphosphonates

2005 ◽  
Vol 284-286 ◽  
pp. 357-360 ◽  
Author(s):  
Luis M. Rodríguez-Lorenzo ◽  
Blanca Vázquez ◽  
Julio San Román
Keyword(s):  
Thermal Analysis ◽  
Contact Angle ◽  
Weight Loss ◽  
Surface Modification ◽  
Bone Resorption ◽  
Ir Spectroscopy ◽  
Surface Energy ◽  
Cellular Interaction ◽  
Polar Component ◽  
Carbonate Apatite

Hydroxyapatite has been frequently described as an osteoconductive but not osteoinductive material based on failure to observe bone formation in nonbony sites. Bisphosphonates (BPs) are stable pyrophosphate analogs, that enhance the proliferation, differentiation and bone forming activity of osteoblasts and are potent inhibitors of bone resorption. In this paper, the modification of a calcium hydroxyfluor carbonate apatite with sodium alendronate and (4-(aminomethyl)benzene)bisphosphonic acid is described. The surface modification is carried out by refluxing the apatite in a bisphosphonate acetone solution. Modified particles are characterized by thermal analysis, ATR-IR spectroscopy and contact angle between other techniques. A weight loss between 150 and 500°C can be observed for the modified apatites. IR spectra show the appearance of bisphosphonate bands on modified powders. The surface energy of the modified apatite is reduced up to a 74% from the total apatite value after the alendronate surface modification with a decrease of 58% of the polar component main responsible of the cellular interaction of biomaterials.

Photocrosslinked PVDF-based star polymer coatings: an all-in-one alternative to PVDF/PMMA blends for outdoor applications

2017 ◽  
Vol 8 (20) ◽  
pp. 3045-3049 ◽  
Author(s):  
Gérald Lopez ◽  
Marc Guerre ◽  
Bruno Améduri ◽  
Jean-Pierre Habas ◽  
Vincent Ladmiral
Keyword(s):  
Contact Angle ◽  
Surface Energy ◽  
Metal Surface ◽  
Water Contact Angle ◽  
Polymer Coatings ◽  
Star Polymer ◽  
Water Contact ◽  
Adhesion Properties ◽  
Pmma Blends

A 4-arm PVDF photocrosslinked coating displays outstanding adhesion properties to a metal surface, and tunable surface energy and water contact angle.

Improved Hydrophobicity of Silicon Dioxide Integrated Zinc-Tellurite Glass Surface

2017 ◽  
Vol 268 ◽  
pp. 87-91
Author(s):  
Syarinie Azmi ◽  
Ramli Arifin ◽  
Sib Krishna Ghoshal
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Surface Energy ◽  
Water Contact Angle ◽  
Glass Surface ◽  
Tellurite Glass ◽  
Hydrophobic Surfaces ◽  
Water Contact ◽  
Host Matrix ◽  
The Impact

Economically viable and maintenance free glass surfaces with improved hydrophobicity are highly demanding in the recent nanotechnology era. Deposition of pollutants and dirt on glass surface that not only causes visual obscurity but also damages the cultural heritages are still to be researched intensely. It is documented that excellent hydrophobic surfaces (with contact angle greater than 90o) can be achieved by controlling the surface wettability, where liquid droplets remain spherical on such surfaces. Selection of materials and the preparation method play a significant role towards such accomplishments. Stirred by this idea, we explored the feasibility of fabricating super-hydrophobic tellurite glass systems by facilely varying the compositions of different constituents. Highly transparent and thermally stable ternary tellurite glass system with chemical composition of (80-x)TeO2 – xSiO2 – 20ZnO, where x = 0.00 to 0.20 mol% are synthesized via conventional melt-quenching method. Samples are characterized using Atomic Force Microscopy (AFM) and contact angle measurements. The impact of SiO2 concentrations variation on the surface roughness, surface energy, and hydrophobic properties are inspected. Glass surface roughness as much as 9.885 nm is attained. The optimal value of water contact angle is discerned to be 101.02° for 0.1 mol% of SiO2 incorporation into the amorphous tellurite host matrix. Besides, the surface energy revealed an inverse proportionality to the water contact angle. This achieved contact angle (greater than 90°) makes this hydrophobic glass surface beneficial for diverse applications. It is established that the present glass composition may be prospective for the development of super-hydrophobic surfaces.

scholarly journals Surface properties of extracts from cork black condensate

Holzforschung ◽  
2010 ◽  
Vol 64 (2) ◽  
Author(s):  
Ricardo A. Pires ◽  
João F. Mano ◽  
Rui L. Reis
Keyword(s):  
Contact Angle ◽  
Surface Energy ◽  
Solid Waste ◽  
Surface Properties ◽  
Protective Coating ◽  
Water Evaporation ◽  
Polar Component ◽  
Coating Surface ◽  
Surface Behavior ◽  
Chemical Groups

Abstract The insulation corkboard production generates black condensate (BC), a paste-like solid waste. It is hydrophobic and has the potential to be used as protective coating. To evaluate this potential, coatings were prepared from BC extracts and their surface behavior was evaluated by contact angle (CA) measurements. The CA dynamics were recorded as a function of time; advancing CAs were also registered; the approaches were applied according to Fowkes, Owens-Wendt-Rabel-Kaelble (OWRK), and Van Oss to determine the surface energy (SE) for each coating. Depending on the liquid probe, three phenomena were observed: water evaporation, diiodomethane diffusion into the coating, and rearrangement of the chemical groups on the coating surface, when glycerol was dropped onto the surface. Based on the results from the CA dynamics, the applicability of the coatings against hydrophobic environments was limited owing to its affinity to apolar compounds. The results show that the coating prepared by the toluene BC extract was the best coating. The key data were: water CA of 99.3°, total SE (between 37.4 mN m-1 and 40.1 mN m-1), SE polar component (0.1 mN m-1), and the acidic and basic characters were negligible. It can be concluded that the BC extracts have potential for coatings.

Study on Fluorocarbon Antifouling Coatings with Low Surface Energy

2011 ◽  
Vol 689 ◽  
pp. 445-449
Author(s):  
Chun Hong Qiu ◽  
Yu Hong Qi ◽  
Zhan Ping Zhang ◽  
Hui Gao
Keyword(s):  
Contact Angle ◽  
Surface Energy ◽  
Water Contact Angle ◽  
Dynamic Testing ◽  
Marine Diatom ◽  
Silicone Resin ◽  
Water Contact ◽  
Antifouling Coating ◽  
Low Surface Energy ◽  
Antifouling Coatings

To develop non-toxic marine antifouling coating, a series of antifouling coatings were prepared based on fluorocarbon copolymer. Based on the measurement of roughness and water contact angle, the attachment test of marine diatom and bacteria before and after dynamic testing in seawater, it has been investigated that the influence of three functional fillings and silicone resin on the performance of the antifouling coatings with low surface energy. The erosion rate of the coatings was measured by the samples rotated 72h at the 12 knots of simulating sailing speed. The results showed that the roughness of coatings changes from 0.2um to 3um, it does influenced slightly by the rotating test. Water contact angle of all coatings is about 100° before rotating test. It decreases to about 70° after the rotating test in seawater. Due to the increase of surface energy of the coatings, both the amount of diatom and bacteria on samples increases after rotating test in seawater.

scholarly journals Biomimetic Wax Interfaces Facilitating Rehealable Polymer Composites

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3052
Author(s):  
Ching-Te Kuo ◽  
Chien-Chin Chen
Keyword(s):  
Contact Angle ◽  
Theoretical Model ◽  
Melting Point ◽  
Surface Energy ◽  
Polymer Composites ◽  
Plant Species ◽  
Healing Time ◽  
Protective Film ◽  
Water Contact ◽  
New Findings

Epicuticular wax, the first protective film for numerous ground plant species, is crucial for modulating the evolution in plants. Since the waxy film is inherently thermoresponsive, many efforts focus on engineering materials for water/oil proofing, delivery, and collection, as well as microactuators by mimicking such film nature. Nonetheless, relatively fewer works address the mechanism of how the underlying substrates direct the reconstruction of waxy films while their temperature approaches the melting point. Here, we presented a strategy in which distinct frameworks of molten wax films could be examined among various substrates. Both “waxphobic” and “waxphilic” traits were first unveiled and could be achieved by the hydrophilic (water contact angle (WCA) = 42~82°) and hydrophobic (WCA = 109°) substrates, respectively. A theoretical model, based on experimental results, fluidic dynamics, and balance of surface energy, was developed to elucidate the above findings. Moreover, we demonstrated the above biomimetic epicuticular surface (BeSurface) can be applied for rewritable paper, erasable coding, and rehealable electronics without manual repairing. Remarkably, the healing time can be reduced down to 30 s, and the cycled folding test can be continued up to 500 times. All the new findings present the potentials of the BeSurface to improve the study of rehealable materials.

Sign in / Sign up

Export Citation Format

Share Document