scholarly journals A Method Based on Elastic Mechanics for Judging Compound Hard Roof and Its Application

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Haiyang Wang ◽  
Xiang Chen ◽  
Yanmin Zhou ◽  
Binwei Xia ◽  
Jie Wang ◽  
...  
Keyword(s):  
Stress Field ◽  
Mechanical Model ◽  
Large Deviation ◽  
Similar Model ◽  
Coal Face ◽  
Hard Roof ◽  
Working Face ◽  
The Common ◽  
Set Up ◽  
Elastic Mechanics

Compound hard roof overlying coal face is the common disaster factor leading to strong strata behaviors. To solve the long-standing problems of only considering partial factors and large deviation from the actuality when identifying compound hard roof, a mechanical model of compound hard roof based on elastic mechanics is built, from which the stress field distribution equations of compound hard roof are formed and the judging criteria of compound hard roof have been set up. In this essay, 8101 Working Face of Tashan Coal Mine in China is the research object for criteria and analysis of compound hard roof, and the result is testified by similar model tests. The research results have provided a basis for judging and dealing with compound hard roof.

Numerical Analysis on Ground Pressure Feature in Fully Mechanized Coal Face

2013 ◽  
Vol 807-809 ◽  
pp. 2299-2303
Author(s):  
Wei Jian Yu ◽  
Tao Feng ◽  
Gang Ye Guo
Keyword(s):  
Numerical Analysis ◽  
Abutment Pressure ◽  
Numerical Procedure ◽  
Wall Rock ◽  
Coal Face ◽  
Distribution Form ◽  
Ground Pressure ◽  
Working Face ◽  
Set Up ◽  
Mining Height

Base on the fully mechanized coal face of 8113 (1) in LaoYingSan mine, numerical analysis method was applied to analyze the ground pressure feature, FLAC software is carried out to set up numerical model, and offer numerical procedure. The mining abutment pressure distribute form and its partition in front of fully mechanized working face. All four different mining height (2.6m2.8m3.0m3.2m) was respectively calculated. In addition, the influence of mining speed to mining abutment pressure and intervals is analyzed, four different mining distance (20m30m40m50m) selected separately. Afterwards, the different solution analyzed respectively, these results show that the mining abutment pressure distribution form in front of fully mechanized working face essentially identical, they including the stress increasing zones, the stress decreasing zones and the initial rock stress stable field. The influence of mining pace to wall rock looseness range greater than mining height.

Analysis of Weighting over Great Extent upon Fully Mechanized Coal Face with Non-Hard Roof Based on Measured Data

2014 ◽  
Vol 962-965 ◽  
pp. 992-997
Author(s):  
Tao Zhu
Keyword(s):  
Experimental Analysis ◽  
Safety Valve ◽  
Measured Data ◽  
Large Area ◽  
Coal Face ◽  
Hydraulic Support ◽  
Mining Technology ◽  
Hard Roof ◽  
Drawing Speed ◽  
Working Face

Due to the influence of geology, mining technology, supporting strength, fully mechanized coal face sometimes would happen large area caving and weighting over great extent, causing casualties. Theoretical and experimental analysis shows, not only hard roof could happen weighting over great extent, but softer roof upon long wall face could happen, the only difference was the location of disaster and the failure forms. The paper analyzed weighting over great extent upon fully mechanized coal face with non-hard roof based on measured data. The results show that, the important factors of support break-off were the setting load of hydraulic support, drawing speed of working face and support efficiency, and it would achieve support break-off warning help to analyze the open rates of safety valve.

Isolation and characterization of oleochemical compounds from watermelon seed

2020 ◽  
Vol 10 (4) ◽  
pp. 79-82
Author(s):  
Madhubhushan M ◽  
Seshaiah S ◽  
Chandrudu J ◽  
Sagar R ◽  
Akila CR
Keyword(s):  
Cutting Tool ◽  
Citrullus Lanatus ◽  
Fatty Esters ◽  
Mineral Oils ◽  
Light Yellow ◽  
Isolation And Characterization ◽  
The Common ◽  
Set Up ◽  
Natural Gradation

The common watermelon item (Citrullus lanatus) seeds were gained from castoffs verdant nourishments for use by decorating, sun ventilation and pulverizing. Light yellow-toned oil was gotten by dissolvable withdrawal using oil atmosphere and the going with traits were gotten using oil ether: pH, refractive rundown, thickness, dissolvable miscibility, coagulating temperature, fire nature, express gravity, streak point and warmth of consuming. With a shallow level of unsaturation, stepped level of smoothness, and proximity of raised degree of the sensible proportion of free unsaturated fats. The low assessment of the solidifying temperature of the oil offered a hint that the oil can be managed in various areas paying little heed to the qualification in temperature. The following level of linoleic destructive of the oil offers a hint of natural gradation of solidarity. Fatty esters are increasing expanding significance as a biodegradable swap for mineral oils. In some request regions, for example, cutting tool oil, gearbox, pressure-driven oils, and greases for raw petroleum creation, the oleochemical items are set up. Nonetheless, certain particular wellsprings of fatty esters are hitherto to be abused for this comparative reason. This exploration subsequently tests into one of the less used wellsprings of fatty esters in watermelon. The oil from the kernels demonstrations a top-notch yield presents significant utilitarian gatherings for change and thus was utilized to set up an assortment of oleochemicals which demonstrated excellence materials in contrast with the routinely utilized oils feed frameworks for oleochemicals after portrayal. The photopolymers acquired indicated piercing vinyl protons for consistent polymerize.

Causality Then and Now

1993 ◽  
Vol 10 (2) ◽  
pp. 165-177
Author(s):  
Karen Harding
Keyword(s):  
Quantum Theory ◽  
Common Sense ◽  
Mechanical Model ◽  
Physical World ◽  
Scientific Data ◽  
The World ◽  
The Common ◽  
The Universe ◽  
The Way

Ate appearances deceiving? Do objects behave the way they do becauseGod wills it? Ate objects impetmanent and do they only exist becausethey ate continuously created by God? According to a1 Ghazlli, theanswers to all of these questions ate yes. Objects that appear to bepermanent are not. Those relationships commonly tefemed to as causalare a result of God’s habits rather than because one event inevitably leadsto another. God creates everything in the universe continuously; if Heceased to create it, it would no longer exist.These ideas seem oddly naive and unscientific to people living in thetwentieth century. They seem at odds with the common conception of thephysical world. Common sense says that the universe is made of tealobjects that persist in time. Furthermore, the behavior of these objects isreasonable, logical, and predictable. The belief that the univetse is understandablevia logic and reason harkens back to Newton’s mechanical viewof the universe and has provided one of the basic underpinnings ofscience for centuries. Although most people believe that the world is accutatelydescribed by this sort of mechanical model, the appropriatenessof such a model has been called into question by recent scientificadvances, and in particular, by quantum theory. This theory implies thatthe physical world is actually very different from what a mechanicalmodel would predit.Quantum theory seeks to explain the nature of physical entities andthe way that they interact. It atose in the early part of the twentieth centuryin response to new scientific data that could not be incorporated successfullyinto the ptevailing mechanical view of the universe. Due largely ...

scholarly journals Comprehensive technical support for safe mining in ultra-close coal seams: A case study

2021 ◽  
pp. 014459872110093
Author(s):  
Wei Zhang ◽  
Jiawei Guo ◽  
Kaidi Xie ◽  
Jinming Wang ◽  
Liang Chen ◽  
...  
Keyword(s):  
Coal Seam ◽  
Technical Support ◽  
Surrounding Rock ◽  
Coal Seams ◽  
Deformation Control ◽  
Hard Roof ◽  
Working Face ◽  
Close Coal Seams ◽  
Safe Mining

In order to mine the coal seam under super-thick hard roof, improve the utilization rate of resources and prolong the remaining service life of the mine, a case study of the Gaozhuang Coal Mine in the Zaozhuang Mining Area has been performed in this paper. Based on the specific mining geological conditions of ultra-close coal seams (#3up and #3low coal seams), their joint systematic analysis has been performed, with the focus made in the following three aspects: (i) prevention of rock burst under super-thick hard roof, (ii) deformation control of surrounding rock of roadways in the lower coal seam, and (iii) fire prevention in the goaf of working face. Given the strong bursting tendency observed in upper coal seam and lower coal seam, the technology of preventing rock burst under super-thick hard roof was proposed, which involved setting of narrow section coal pillars to protect roadways and interleaving layout of working faces. The specific supporting scheme of surrounding rock of roadways in the #3low1101 working face was determined, and the grouting reinforcement method of local fractured zones through Marithan was further proposed, to ensure the deformation control of surrounding rock of roadways in lower coal seams. The proposed fire prevention technology envisaged goaf grouting and spraying to plug leaks, which reduced the hazard of spontaneous combustion of residual coals in mined ultra-close coal seams. The technical and economic improvements with a direct economic benefit of 5.55 million yuan were achieved by the application of the proposed comprehensive technical support. The research results obtained provide a theoretical guidance and technical support of safe mining strategies of close coal seams in other mining areas.

scholarly journals Safety Warning Model of Coal Face Based on FCM Fuzzy Clustering and GA-BP Neural Network

Symmetry ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 1082
Author(s):  
Fanqiang Meng
Keyword(s):  
Neural Network ◽  
Genetic Algorithm ◽  
Early Warning ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Coal Face ◽  
Early Warning Model ◽  
Working Face ◽  
The Neural Network ◽  
Warning Model

Risk and security are two symmetric descriptions of the uncertainty of the same system. If the risk early warning is carried out in time, the security capability of the system can be improved. A safety early warning model based on fuzzy c-means clustering (FCM) and back-propagation neural network was established, and a genetic algorithm was introduced to optimize the connection weight and other properties of the neural network, so as to construct the safety early warning system of coal mining face. The system was applied in a coal face in Shandong, China, with 46 groups of data as samples. Firstly, the original data were clustered by FCM, the input space was fuzzy divided, and the samples were clustered into three categories. Then, the clustered data was used as the input of the neural network for training and prediction. The back-propagation neural network and genetic algorithm optimization neural network were trained and verified many times. The results show that the early warning model can realize the prediction and early warning of the safety condition of the working face, and the performance of the neural network model optimized by genetic algorithm is better than the traditional back-propagation artificial neural network model, with higher prediction accuracy and convergence speed. The established early warning model and method can provide reference and basis for the prediction, early warning and risk management of coal mine production safety, so as to discover the hidden danger of working face accident as soon as possible, eliminate the hidden danger in time and reduce the accident probability to the maximum extent.

scholarly journals Adverse Selection, Heterogeneous Beliefs, and Evolutionary Learning

2021 ◽  
Author(s):  
Clemens Buchen ◽  
Alberto Palermo
Keyword(s):  
Adverse Selection ◽  
Relative Size ◽  
Nonlinear Dynamic System ◽  
Heterogeneous Beliefs ◽  
Evolutionary Learning ◽  
Common Assumption ◽  
Cobweb Model ◽  
The Common ◽  
Learning Set ◽  
Set Up

AbstractWe relax the common assumption of homogeneous beliefs in principal-agent relationships with adverse selection. Principals are competitors in the product market and write contracts also on the base of an expected aggregate. The model is a version of a cobweb model. In an evolutionary learning set-up, which is imitative, principals can have different beliefs about the distribution of agents’ types in the population. The resulting nonlinear dynamic system is studied. Convergence to a uniform belief depends on the relative size of the bias in beliefs.

The Effect of Two Rigid Spherical Inclusions on the Stresses in an Infinite Elastic Solid

1966 ◽  
Vol 33 (1) ◽  
pp. 68-74 ◽  
Author(s):  
Joseph F. Shelley ◽  
Yi-Yuan Yu
Keyword(s):  
Stress Field ◽  
Uniaxial Tension ◽  
Elastic Solid ◽  
Displacement Function ◽  
Hydrostatic Tension ◽  
Series Form ◽  
Spherical Inclusions ◽  
Spherical Cavities ◽  
In Series ◽  
The Common

Presented in this paper is a solution in series form for the stresses in an infinite elastic solid which contains two rigid spherical inclusions of the same size. The stress field at infinity is assumed to be either hydrostatic tension or uniaxial tension in the direction of the common axis of the inclusions. The solution is based upon the Papkovich-Boussinesq displacement-function approach and makes use of the spherical dipolar harmonics developed by Sternberg and Sadowsky. The problem is closely related to, but turns out to be much more involved than, the corresponding problem of two spherical cavities solved by these authors.

Research on Chaotic Behavior of Concrete under External Load Based on Discontinuous Medium Mechanical Model

2009 ◽  
Vol 79-82 ◽  
pp. 1145-1148
Author(s):  
Hao Qin ◽  
Shu Cai Li
Keyword(s):  
External Load ◽  
Mechanical Model ◽  
Dynamical Equation ◽  
Chaotic Behavior ◽  
Concrete Material ◽  
Nonlinear Dynamical ◽  
Load Change ◽  
Nonlinear Science ◽  
Set Up ◽  
Discontinuous Medium

Outburst and random are typical characters of concrete when under external load. Traditional mechanics methods are difficult to be applied in. Depend on nonlinear science to set up the nonlinear dynamical equation that is fit for its characteristics. The subsystem dynamical equation of concrete is set up based on discontinuous medium mechanical model, and find that the concrete dynamical equation under external load is a Duffin equation. Then analyze and discuss the effect of external load on concrete by math analysis soft of maple. Results show that the concrete material take on complicated response to external load change.

Statics Analysis of the Mechanical Model of Nucleosome

2011 ◽  
Vol 343-344 ◽  
pp. 661-667 ◽  
Author(s):  
Yun Xue ◽  
De Wei Weng ◽  
Gang Ming Gong
Keyword(s):  
Mechanical Model ◽  
The Other ◽  
Elastic Rod ◽  
Equilibrium Equations ◽  
Constraint Force ◽  
Precession Angle ◽  
Nutation Angle ◽  
Analytic Expression ◽  
Set Up ◽  
Calculated Analysis

Mechanical model of nucleoside and its equilibrium equations are set up, and the mechanical properties on the equilibrium position are analyzed. In the case constraint force and electrostatic attraction between cylinder OH and elastic rod are balanced, the analytic expression of nutation angle of the section and its conditions of existence are given. It is show that the cylinder OH can maintain equilibrium at any range of the precession angle. In the other case when unbanced, there is phenomenon of separation of elastic rod from cylinder OH in the spiral wound 2 circles, and numerical solution of the precession angle at separation points are calculated. Analysis of equilibrium of cylinder H1 illustrates that the generatrix of cylinder H1 and OH are not parallel, and the angle between them is obtained

Sign in / Sign up

Export Citation Format

Share Document