scholarly journals Study on the Key Technology of Controlling the Instability of Deep High-Stress Coal and Rock Mass and Relieving the Danger

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Zhijing Zhang ◽  
Jianghong Zuo ◽  
Dongji Lei
Keyword(s):  
Rock Mass ◽  
Coal Seam ◽  
Rock Fracture ◽  
Mine Safety ◽  
Detection Accuracy ◽  
Pressure Relief ◽  
Rock Body ◽  
Thick Coal Seam ◽  
Before And After ◽  
Relief Effect

In order to solve the problem of stress concentration and gas overrun in the process of uncovering high gas and thick coal seam, combined with the occurrence characteristics of coal seams in Wuyang Coal Mine, the measures of “hydraulic and mechanical cavity making + steel screen pipe + surrounding rock grouting” are adopted to establish a method for mutual verification of multiple effect test indexes of residual stress, residual gas content, coal seam moisture content, and microseismic signal characteristics, and the three-dimensional accurate analysis of the influence range of hydraulic cavitation is effectively realized. By comparing and analyzing the gas extraction amount, the surrounding borehole stress change and the microseismic monitoring signals before and after the application of hydraulic cavitation technology are studied. The results show the following. (1) The pressure relief effect of the hydraulic cavity on surrounding coal decreases with the increase of distance, and the pressure relief effect is most obvious at 1.0∼2.5 m, in the range of 2.5–3.5 m around the hydraulic drilling hole, the duration, rate, and amplitude of pressure relief are reduced compared with those in the range of less than 2.5 m, while in the range of more than 3.5 m, the effect of pressure relief is very weak. (2) During the period of hydraulic cavitation release hole, the radius of water supply to coal seam is within 1.5 m, which accounts for 79% of coal wall area. (3) It is also a process where the stress distribution in the coal and rock body needs to be rebalanced before and after hydraulic caverning, which is often accompanied by microfracture of coal and rock mass. The analysis shows that, before hydraulic caverning, the waveform of coal and rock fracture signal has a short duration, large amplitude, and obvious signal mutation, and the dominant frequency of the signal is about 250 Hz, with large total energy. After hydraulic caverning, the intensity of coal and rock fracture events is greatly reduced. The research results can effectively identify the influence range of hydraulic cavitation, improve the detection accuracy and efficiency of hydraulic cavitation range, effectively predict and warn the hidden danger of mine safety, and provide a reference for the work of similar mines.

scholarly journals Study on Rib Sloughage Prevention Based on Geological Structure Exploration and Deep Borehole Grouting in Front Abutment Zones

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Cheng Wang ◽  
Zuqiang Xiong ◽  
Chun Wang ◽  
Yuli Wang ◽  
Yaohui Zhang
Keyword(s):  
Coal Seam ◽  
Tectonic Stress ◽  
Geological Structure ◽  
Longwall Face ◽  
Mine Safety ◽  
Shanxi Province ◽  
Thick Coal Seam ◽  
Plastic Failure ◽  
Mining Conditions ◽  
Roof Strata

This research presents the grouting method of preventing rib sloughage which severely impacts mine safety and longwall retreat speed in thick coal seam with numerical simulation and laboratory tests. Based on the analysis of the plastic failure mode of five types of coal seam, roof strata ahead of the longwall face, and fractures developed in the coal seam, the following results are drawn, the range and degree of plastic failure generated in the coal seam and roof strata ahead of the longwall face gradually decreased as the coal mass strength increased; the grouting boreholes are essentially laid out within the coal rib instead of the roof. For a particular case of a coal mine in Shanxi province, a novel cement-based material was grouted, which fulfilled the reinforcement requirements under the tectonic stress regions and front abutment zones. Besides, the grouting borehole construction requested predrilled boreholes, full borehole intubation, lengthened hole sealing, and multiple-step drilling and grouting. This study can provide a theoretical framework of a design overview and practical basis for similar mining conditions in other coalfields.

Analysis on Gas Drainage Based on High-Pressure Water Injection

2012 ◽  
Vol 524-527 ◽  
pp. 1147-1152
Author(s):  
Chao Zheng ◽  
Tian Hong Yang ◽  
Qing Lei Yu ◽  
Peng Hai Zhang
Keyword(s):  
High Pressure ◽  
Coal Seam ◽  
Water Injection ◽  
Mine Safety ◽  
Gas Drainage ◽  
Damage Area ◽  
Major Disaster ◽  
Before And After ◽  
Pressure Water ◽  
Injection Technology

Gas outburst has been a major disaster in high gas mine. Flow law of gas in coal seam was studied, and gas drainage measures were proposed were extraordinarily useful for mine safety and rational use of gas. Finite element numerical method was applied to study changing law of gas pressure before and after the high-pressure water injection and damage deformation of coal under high-pressure water based on fluid-solid coupling and gas-solid coupling and damage theory. This research shows that: (1) a damage area was generated in coal seam under high-pressure water injection. Range of the damage area increase rapidly at the start of water injection and gradually slow down with the passage of time, eventually be more stable. (2) The permeability of rock mass of coal under high-pressure water injection. (3) High-pressure water injection had significant effect on gas drainage in a certain area. It provided a theoretical basis for selecting reasonable design programs to product gas by high-pressure water injection technology.

scholarly journals Engineering Practice of Ultra-high Pressure Hydraulic Slotting and Pressure Relief Pumping in Through Layer Hole

2021 ◽  
Vol 236 ◽  
pp. 01029
Author(s):  
Siqian Li
Keyword(s):  
High Pressure ◽  
Coal Seam ◽  
High Efficiency ◽  
Engineering Practice ◽  
Pressure Relief ◽  
Gas Drainage ◽  
Thick Coal Seam ◽  
Ultra High Pressure ◽  
Drainage Rate ◽  
Gas Control

In order to solve the problems of low gas drainage rate and long drainage time in thick coal seam with low permeability, ultra-high pressure hydraulic slotting pressure relief and permeability enhancement technology was applied in the test. The practice shows that after adopting the ultra-high pressure hydraulic slotting, the gas drainage rate is greatly improved, the time for reaching the standard of drainage is shortened, and the difficult problem of gas control in the mining face of thick coal seam is solved, which provides technical guidance for high-efficiency gas control in thick coal seam with similar conditions in mining area.

scholarly journals Study on Pressure Relief Effect of Rock Mass with Different Borehole Parameters

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Chao Peng ◽  
Wanrong Liu
Keyword(s):  
Acoustic Emission ◽  
Rock Mass ◽  
Rock Burst ◽  
Strength Reduction ◽  
Surrounding Rock ◽  
Reduction Degree ◽  
Occurrence Time ◽  
Pressure Relief ◽  
Research Results ◽  
Relief Effect

Rock burst is one of the disaster accidents that can easily happen in rock cavern engineering. At present, one of the most commonly used methods to control rock burst is borehole pressure relief technology. In this paper, the influence of drilling layout schemes on the pressure relief effect of surrounding rock mass is systematically studied. The research results show that the strength reduction degree, AE evolution characteristics, failure modes of rock samples with different borehole positions, boreholes spacing, boreholes dip angles, and boreholes layout forms are different. The strength reduction degree of rock sample with an inclined arrangement form is the largest, followed by the arrangement form being up three-flower layout or down three-flower layout. Using the inclined layout and three-flower layout can achieve better pressure relief effect of the surrounding rock mass. The research results are beneficial to the rock burst of surrounding rock of the cavern. The acoustic emission can effectively monitor the stability of the surrounding rock of the cavern. However, the threshold value and the occurrence time of the acoustic emission of the cavern instability changed after the cavern surrounding rock is drilled holes. If the borehole is arranged at the surrounding rock mass, the occurrence time of the cavern instability may be advanced.

scholarly journals An Influence Study of Face Length Effect on Floor Stability under Water-Rock Coupling Action

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Baojie Fu ◽  
Bo Wang
Keyword(s):  
Rock Mass ◽  
Coal Seam ◽  
Mine Pressure ◽  
Length Effect ◽  
Pressure Relief ◽  
Limestone Aquifer ◽  
Study Results ◽  
Face Length ◽  
The Face ◽  
Floor Stability

The Taiyuan Formation limestone aquifer and Ordovician limestone aquifer are widely distributed in the coal seam floor of coal measures in North China; the water hazard safety problem of the stope floor under the influence of mining is very prominent. The risk of the water inrush from the coal seam floor is closely related to the degree of full exploitation, so it is necessary to study the stability of the stope floor under aquifer conditions, especially the influence of the working face length effect on floor stability. Through numerical simulation of water-rock coupling action, the mine pressure behaviors of the water-resisting floor under different face lengths were analyzed based on the measured formation permeability coefficient. The Fish program was used to adjust rocks entering the plastic failure state into a strain softening model to investigate the influence of the face length effect, the damage degree of the water-resisting floor, and the morphology and deformation bearing capacity of the failure zone. The results show the following: (1) the face length effect is one of the main influence factors of the failure mode and failure degree of surrounding rocks in the stope; (2) as the face length increases, the obvious pressure relief zone of surrounding rocks presents a staged change, and the obvious pressure relief zone at the seam roof and floor is in an obvious “reverse saddle shape”; (3) the closer to the seam floor, the more remarkable the rock softening characteristic because of the compaction action of gangues caving from the roof; and (4) the rock mass close to the seam floor undergoes local tensile failure, and the water-resisting floor near the coal wall at two sides mainly bears compaction-shear action, leading to compression-shear failure of the rock mass at the floor and formation of water-conducting fractures. The study results can provide a reference for taking precautionary measures of safety mining above a confined aquifer.

scholarly journals Study of Gob-Side Entry Retaining Technology with Roof Cutting under Upper Roadway Condition

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Xingen Ma ◽  
Manchao He ◽  
Xuewei Sun ◽  
Jianfeng Li ◽  
Gang He ◽  
...  
Keyword(s):  
Coal Seam ◽  
Surrounding Rock ◽  
Pressure Relief ◽  
Application System ◽  
Thick Coal Seam ◽  
Working Face ◽  
Geological Conditions ◽  
Key Technologies ◽  
Releasing Effect ◽  
System Designs

Gob-side entry retaining technology with roof cutting (GERRC) has been widely used in flat and near-flat coal seam conditions, but its application under inclined coal seam is still very deficient. In order to further improve the application system of GERRC and overcome the application difficulties under special geological conditions, this paper takes the 43073 working face of Yixin coal mine as an example to research the GERRC with upper roadway under gently inclined thick coal seam. Firstly, the difficulties in the upper entry retaining with inclined coal seam are analyzed and the corresponding key technologies and system designs are put forward. Subsequently, the roof cutting and upper entry retaining are designed in detail according to geological conditions of test working face, and the roof cutting and pressure releasing effect is analyzed by numerical simulation to expound the stress distribution and pressure releasing mechanism of surrounding rock. Finally, the upper entry retaining field test is carried out to verify the feasibility and applicability of the technology and related designs. Through field monitoring, it is found that the weighting step increases significantly, the weighting strength decreases effectively on the roof cutting side, and the pressure relief effect is obvious. Meanwhile, the maximum roof to floor convergence is 361 mm and the maximum shrinkage of both sides is 280 mm, so the retained entry can meet the reuse requirement of adjacent working face.

Sign in / Sign up

Export Citation Format

Share Document