scholarly journals Investigation of the Mechanical and Permeability Evolution Effects of High-Temperature Granite Exposed to a Rapid Cooling Shock with Liquid Nitrogen

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Tianzuo Wang ◽  
Linxiang Wang ◽  
Fei Xue ◽  
Mengya Xue ◽  
Hangcheng Xie ◽  
...  
Keyword(s):  
Liquid Nitrogen ◽  
Axial Stress ◽  
Triaxial Compression ◽  
Deformation Characteristic ◽  
Initial Permeability ◽  
Ductile Deformation ◽  
Effect Of Temperature ◽  
Geothermal System ◽  
Permeability Evolution ◽  
Deformation Properties

Liquid nitrogen (LN2), which can greatly improve the efficiency of hot dry rock (HDR) mining, is commonly used as a cooling material in the enhanced geothermal system (EGS). Physical property, triaxial compression, and permeability tests were undertaken on treated granite samples, for a better scientific understanding of the effect of the LN2 cooling method on the mechanical and permeability properties of the rocks after heat treatment. The experimental results indicated that the physical properties of the treated granite change significantly, such as the density and wave velocity are substantially reduced. Meanwhile, with the increase of treatment temperature, the macroscopic cracks on its surface are gradually generated and the volume is expanded clearly. In addition, the surface wettability of granite gradually increases with increasing temperature. Compared with the air/water cooling methods, under LN2 cooling condition, the mechanical properties decrease markedly. When the temperature exceeds 600°C, the granite strength decreases significantly to only 56.16% of the reference value. The deformation properties also change significantly, with a final strain of about 3% at failure for a sample at 800°C, showing an obvious ductile deformation characteristic. Further, an appreciable correlation also exists between the initial permeability of granite and temperature. Once the temperature exceeds 200°C, the increase in temperature contributes to the increase in initial permeability. In addition to the effect of temperature, the increase in load also leads to a change in the permeability coefficient. When the temperature reaches 600°C, the permeability of granite first decreases and then increases with the increases in axial stress. The results of this paper are valuable in understanding the effect of thermal shock by LN2 on the fracturing efficiency and permeability characteristics of dry hot rocks.

scholarly journals Gas Permeability Change with Deformation and Cracking of a Sandstone under Triaxial Compression

2021 ◽  
Author(s):  
Yuan-Jian LIN ◽  
Jiang-Feng LIU ◽  
Tao CHEN ◽  
Shi-Jia MA ◽  
Pei-Lin WANG ◽  
...  
Keyword(s):  
Gas Permeability ◽  
Axial Stress ◽  
Triaxial Compression ◽  
Gas Injection ◽  
Injection Pressure ◽  
Confining Pressure ◽  
Loading Path ◽  
Permeability Evolution ◽  
Axial Pressure ◽  
Triaxial Cell

Abstract In this paper, a THMC multi-field coupling triaxial cell was used to systematically study the evolution of gas permeability and the deformation characteristics of sandstone. The effects of confining pressure, axial pressure and air pressure on gas permeability characteristics were fully considered in the test. The gas permeability of sandstone decreases with increasing confining pressure. When the confining pressure is low, the variation of gas permeability is greater than the variation of gas permeability at high confining pressure. The gas injection pressure has a significant effect on the gas permeability evolution of sandstone. As the gas injection pressure increases, the gas permeability of sandstone tends to decrease. At the same confining pressure, the gas permeability of the sample during the unloading path is less than the gas permeability of the sample in the loading path. When axial pressure is applied, the axial stress has a significant influence on the permeability evolution of sandstone. When the axial pressure is less than 30 MPa, the gas permeability of the sandstone increases as the axial pressure increases. At axial pressures greater than 30 MPa, the permeability decreases as the axial pressure increases. Finally, the micro-pore/fracture structure of the sample after the gas permeability test was observed using 3D X-ray CT imaging.

scholarly journals Experimental Investigation on the Evolution of Damage and Seepage Characteristics for Red Sandstone under Thermal-mechanical Coupling Conditions

2021 ◽  
Author(s):  
Haopeng Jiang ◽  
Annan Jiang ◽  
Fengrui Zhang
Keyword(s):  
High Temperature ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Effect Of Temperature ◽  
Permeability Evolution ◽  
Red Sandstone ◽  
Permeability Characteristics ◽  
Mechanical Coupling ◽  
Coupling Conditions ◽  
Rock Stability

Abstract Rock masses in underground space usually experience the coupling of high-temperature field, stress field and seepage field, which gives them complex mechanical behavior and permeability characteristics. In order to study the mechanical properties and permeability characteristics of red sandstone under different temperature environments, a seepage test under high temperature and triaxial compression is carried out based on the RLW-2000 multi-field coupling tester. The results show that the plastic flow of red sandstone at the stress peak under the same temperature is more obvious with the increase of confining pressure. In addition, as the confining pressure gradient increases, the permeability decreases and the trend becomes slower. And the higher the operating temperature, the easier to produce seepage channels inside the rock sample. The development of fissures is rapidly developed under the effect of temperature, so the seepage channels are widened and increased, and the permeability is greatly increased. The constitutive model of rock statistical damage considering the interaction of high temperature and osmotic pressure was constructed based on the experimental data and combining theoretical methods to reveal the characteristics of permeability evolution induced by thermal damage of rocks. The research results can be used as a reference for monitoring rock stability during geological engineering projects involving thermal-seepage-stress coupling conditions.

scholarly journals Study on the Permeability Evolution Model of Mining-Disturbed Coal

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Hengyi Jia ◽  
Delong Zou
Keyword(s):  
Axial Stress ◽  
Triaxial Compression ◽  
Strain Curve ◽  
Stress Path ◽  
Coal Mass ◽  
Coal Bed ◽  
Permeability Evolution ◽  
Conventional Triaxial Compression ◽  
Deformation Stages ◽  
Triaxial Creep

Coal permeability plays an important role in the simultaneous exploitation of coal and coal-bed methane (CBM). The stress of mining-disturbed coal changes significantly during coal mining activities, causing damage and destruction of the coal mass, ultimately resulting in a sharp increase in permeability. Conventional triaxial compression and permeability tests were conducted on a triaxial creep-seepage-adsorption and desorption experimental device to investigate the permeability evolution of mining-disturbed coal. The permeability evolution models considering the influence of the stress state and stress path on the fracture propagation characteristics were established based on the permeability difference in the deformation stages of the coal mass. The stress-strain curve of the coal was divided into an elastic stage, yield stage, and plastic flow stage. As the axial stress increased, the permeability decreased and then increased, and the curve’s inflection point corresponded to the yield point. The permeability models exhibited a good agreement with the experimental data and accurately reflected the overall trends of the test results. The results of this study provide a theoretical basis for coal mine disaster prevention and the simultaneous exploitation of coal and CBM.

scholarly journals Permeability evolution of unloaded coal samples at different loading rates

2014 ◽  
Vol 18 (5) ◽  
pp. 1497-1504 ◽  
Author(s):  
Ze-Tian Zhang ◽  
Zhang Ru ◽  
Jian-Feng Liu ◽  
Xiao-Hui Liu ◽  
Jia-Wei Li
Keyword(s):  
Triaxial Compression ◽  
Axial Loading ◽  
Peak Stress ◽  
Initial Permeability ◽  
Differential Method ◽  
Permeability Evolution ◽  
Compression Tests ◽  
Evolution Law ◽  
Loading Rates ◽  
Conventional Triaxial Compression

As coal mass is often at unloading status during mining process, it is of great significance to push on the research on permeability evolution of unloaded coal samples at different loading rates. A series of triaxial unloading experiments were conducted for initially intact coal samples using an improved rock mechanics testing system, and the permeability was continuously measured by the constant pressure differential method for methane. Permeability evolution law of unloaded coal samples and the influence mechanism of loading rates on that were studied. The results of triaxial unloading experiments indicate that the permeability of coal samples increases throughout the whole testing process without a descent stage, which is different from the permeability evolution law in conventional triaxial compression tests. The maximum permeability of unloaded coal sample, which is 4 to 18 times to its initial permeability, often appears before reaching the peak stress and increases with the decrease of axial loading rate. Stress state corresponding to the surge point of permeability of the unloaded coal samples is also discussed.

scholarly journals Coupled Effects of Stress, Moisture Content and Gas Pressure on the Permeability Evolution of Coal Samples: A Case Study of the Coking Coal Resourced from Tunlan Coalmine

Water ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1653
Author(s):  
Guofu Li ◽  
Yi Wang ◽  
Junhui Wang ◽  
Hongwei Zhang ◽  
Wenbin Shen ◽  
...  
Keyword(s):  
Moisture Content ◽  
Coalbed Methane ◽  
Gas Permeability ◽  
Axial Stress ◽  
Gas Pressure ◽  
Pressure Curve ◽  
Permeability Evolution ◽  
Confining Stress ◽  
Qinshui Basin ◽  
Gas Seepage

Deep coalbed methane (CBM) is widely distributed in China and is mainly commercially exploited in the Qinshui basin. The in situ stress and moisture content are key factors affecting the permeability of CH4-containing coal samples. Therefore, considering the coupled effects of compressing and infiltrating on the gas permeability of coal could be more accurate to reveal the CH4 gas seepage characteristics in CBM reservoirs. In this study, coal samples sourced from Tunlan coalmine were employed to conduct the triaxial loading and gas seepage tests. Several findings were concluded: (1) In this triaxial test, the effect of confining stress on the permeability of gas-containing coal samples is greater than that of axial stress. (2) The permeability versus gas pressure curve of coal presents a ‘V’ shape evolution trend, in which the minimum gas permeability was obtained at a gas pressure of 1.1MPa. (3) The gas permeability of coal samples decreased exponentially with increasing moisture content. Specifically, as the moisture content increasing from 0.18% to 3.15%, the gas permeability decreased by about 70%. These results are expected to provide a foundation for the efficient exploitation of CBM in Qinshui basin.

Measurement of Cement in Situ Stresses and Mechanical Properties Without Cooling or Depressurization

2021 ◽  
Author(s):  
Meng Meng ◽  
Luke Frash ◽  
James Carey ◽  
Wenfeng Li ◽  
Nathan Welch ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Elastic Modulus ◽  
Poisson’S Ratio ◽  
Axial Stress ◽  
Triaxial Compression ◽  
In Situ Measurement ◽  
Poisson's Ratio ◽  
Ambient Conditions

Abstract Accurate characterization of oilwell cement mechanical properties is a prerequisite for maintaining long-term wellbore integrity. The drawback of the most widely used technique is unable to measure the mechanical property under in situ curing environment. We developed a high pressure and high temperature vessel that can hydrate cement under downhole conditions and directly measure its elastic modulus and Poisson's ratio at any interested time point without cooling or depressurization. The equipment has been validated by using water and a reasonable bulk modulus of 2.37 GPa was captured. Neat Class G cement was hydrated in this equipment for seven days under axial stress of 40 MPa, and an in situ measurement in the elastic range shows elastic modulus of 37.3 GPa and Poisson's ratio of 0.15. After that, the specimen was taken out from the vessel, and setted up in the triaxial compression platform. Under a similar confining pressure condition, elastic modulus was 23.6 GPa and Possion's ratio was 0.26. We also measured the properties of cement with the same batch of the slurry but cured under ambient conditions. The elastic modulus was 1.63 GPa, and Poisson's ratio was 0.085. Therefore, we found that the curing condition is significant to cement mechanical property, and the traditional cooling or depressurization method could provide mechanical properties that were quite different (50% difference) from the in situ measurement.

scholarly journals Effect of Temperature of Liquid Nitrogen on Radiation Resistance of Spores of Clostridium botulinum1

1965 ◽  
Vol 13 (4) ◽  
pp. 527-536
Author(s):  
Nicholas Grecz ◽  
O. P. Snyder ◽  
A. A. Walker ◽  
A. Anellis
Keyword(s):  
Liquid Nitrogen ◽  
Radiation Resistance ◽  
Effect Of Temperature

scholarly journals The Porosity Dynamic Model of the Compacted Broken Coal

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Xuefeng Han ◽  
Tingxiang Chu ◽  
Minggao Yu ◽  
Jiangkun Chao ◽  
Zhihui Ma ◽  
...  
Keyword(s):  
Spontaneous Combustion ◽  
Axial Stress ◽  
Fractal Theory ◽  
Dynamic Change ◽  
Strain Curve ◽  
Fractal Model ◽  
Evolution Model ◽  
Dynamic Evolution ◽  
Permeability Evolution ◽  
Loading Test

In order to study the dynamic change law of the porosity of the compacted broken coal under different axial stress loading, based on the environment of the broken and compacted coal in the gob, aiming at the influence of the porosity on the spontaneous combustion of the coal, combined with the fractal theory, the fractal model of the porosity of the broken coal is established. A self-designed “testing device for permeability evolution and spontaneous combustion characteristics of crushed coal under pressure” is used to carry out axial loading test on selected coal samples in the gob. By comparing and analyzing the calculated results of void dynamic evolution model and experimental data, it is found that the relative error of void dynamic evolution model is between 2.8% and 6.2%, which meets the engineering needs. According to the stress-strain curve, initial accumulation state parameters, fractal dimension of initial crushing, and particle size distribution, the change of porosity under different compacted conditions can be predicted by the model, which has certain significance for identifying the change of compacted broken coal porosity and analyzing the process of coal spontaneous combustion and oxidation.

Sign in / Sign up

Export Citation Format

Share Document