scholarly journals 3D Modeling Design of Multirole Virtual Character Based on Visual Communication in Wireless Sensor Networks

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Meiting Qu ◽  
Lei Li
Keyword(s):  
3D Modeling ◽  
Visual Communication ◽  
Design Method ◽  
Algorithm Design ◽  
Three Dimensional ◽  
Wireless Sensor ◽  
Virtual Character ◽  
Structure Information ◽  
3D Skeleton ◽  
Geometric Surface

In order to solve the problems of poor design effect and time consumption of traditional virtual character modeling design methods, a three-dimensional (3D) modeling design method of multirole virtual characters based on visual communication is studied. Firstly, the wireless sensor network is used to locate, scan, and collect the human body structure information and convert the coordinates to bind the 3D skeleton. Secondly, according to different human postures, we switch the linear hybrid skin algorithm, spherical hybrid skin algorithm, and double quaternion hybrid skin algorithm; design the geometric surface; and attach it to the 3D skeleton to generate 3D modeling. Finally, based on the influence of visual communication on human eye observation and psychological feeling, the geometric surface is divided twice, and the virtual character is rendered in the way of display, coating, and splicing to obtain a complete 3D modeling of the virtual character. The results show that the positioning coverage of this method is higher, the rendering effect of the hand and head is better, the design time is significantly shortened, and the maximum time is no more than 35 min.

scholarly journals Application of 3D Modeling Technology in Engineering Graphics

2021 ◽  
Vol 2074 (1) ◽  
pp. 012079
Author(s):  
Yan Zhang ◽  
Qinghua Li ◽  
Chunshan He ◽  
Liai Pan
Keyword(s):  
3D Modeling ◽  
Design Method ◽  
Three Dimensional ◽  
Modeling Technology ◽  
Teaching Reform ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Engineering Drawings ◽  
The Times

Abstract With the development of technology and the progress of the times, the application methods and expression methods (including teaching methods) of engineering drawings have undergone tremendous changes. This article analyzes the reasons that restrict the three-dimensional design method can not completely replace the two-dimensional drawing in the short term, and proposes the teaching reform direction that combines the three-dimensional modeling with the traditional graphics content. It clarifies the role of 3D modeling content in graphics courses at this stage, and explains the specific methods of introducing 3D modeling in different stages of graphics courses and the choice of teaching software.

Electron crystallographic determination of the 3-D structure of staurolite at atomic resolution

1991 ◽  
Vol 49 ◽  
pp. 540-541
Author(s):  
Kenneth H. Downing ◽  
Hu Meisheng ◽  
Hans-Rudolf Went ◽  
Michael A. O'Keefe
Keyword(s):  
High Resolution ◽  
Three Dimensional ◽  
High Resolution Electron Microscopy ◽  
Atomic Resolution ◽  
Dimensional Structure ◽  
Structure Information ◽  
Resolution Electron ◽  
Scattering Effects ◽  
High Resolution Images ◽  
Effects Of Radiation

With current advances in electron microscope design, high resolution electron microscopy has become routine, and point resolutions of better than 2Å have been obtained in images of many inorganic crystals. Although this resolution is sufficient to resolve interatomic spacings, interpretation generally requires comparison of experimental images with calculations. Since the images are two-dimensional representations of projections of the full three-dimensional structure, information is invariably lost in the overlapping images of atoms at various heights. The technique of electron crystallography, in which information from several views of a crystal is combined, has been developed to obtain three-dimensional information on proteins. The resolution in images of proteins is severely limited by effects of radiation damage. In principle, atomic-resolution, 3D reconstructions should be obtainable from specimens that are resistant to damage. The most serious problem would appear to be in obtaining high-resolution images from areas that are thin enough that dynamical scattering effects can be ignored.

scholarly journals Accelerated Time and High-Resolution 3D Modeling of the Flow and Dispersion of Noxious Substances over a Gigantic Urban Area—The EMERGENCIES Project

Atmosphere ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 640
Author(s):  
Olivier Oldrini ◽  
Patrick Armand ◽  
Christophe Duchenne ◽  
Sylvie Perdriel ◽  
Maxime Nibart
Keyword(s):  
High Resolution ◽  
Urban Area ◽  
3D Modeling ◽  
Three Dimensional ◽  
Hazardous Materials ◽  
Support Tool ◽  
On Demand ◽  
Simulation Domain ◽  
Dimensional Simulation ◽  
Atmospheric Release

Accidental or malicious releases in the atmosphere are more likely to occur in built-up areas, where flow and dispersion are complex. The EMERGENCIES project aims to demonstrate the operational feasibility of three-dimensional simulation as a support tool for emergency teams and first responders. The simulation domain covers a gigantic urban area around Paris, France, and uses high-resolution metric grids. It relies on the PMSS modeling system to model the flow and dispersion over this gigantic domain and on the Code_Saturne model to simulate both the close vicinity and the inside of several buildings of interest. The accelerated time is achieved through the parallel algorithms of the models. Calculations rely on a two-step approach: the flow is computed in advance using meteorological forecasts, and then on-demand release scenarios are performed. Results obtained with actual meteorological mesoscale data and realistic releases occurring both inside and outside of buildings are presented and discussed. They prove the feasibility of operational use by emergency teams in cases of atmospheric release of hazardous materials.

Practitioner-friendly design method to improve the seismic performance of RC frame buildings

2021 ◽  
pp. 875529302098801
Author(s):  
Orlando Arroyo ◽  
Abbie Liel ◽  
Sergio Gutiérrez
Keyword(s):  
Seismic Performance ◽  
Design Method ◽  
Three Dimensional ◽  
Rc Frame ◽  
Structural System ◽  
Standard Code ◽  
Frame Buildings ◽  
Rc Frame Buildings ◽  
Mathematical Justification ◽  
Story Building

Reinforced concrete (RC) frame buildings are a widely used structural system around the world. These buildings are customarily designed through standard code-based procedures, which are well-suited to the workflow of design offices. However, these procedures typically do not aim for or achieve seismic performance higher than code minimum objectives. This article proposes a practical design method that improves the seismic performance of bare RC frame buildings, using only information available from elastic structural analysis conducted in standard code-based design. Four buildings were designed using the proposed method and the prescriptive approach of design codes, and their seismic performance is evaluated using three-dimensional nonlinear (fiber) models. The findings show that the seismic performance is improved with the proposed method, with reductions in the collapse fragility, higher deformation capacity, and greater overstrength. Furthermore, an economic analysis for a six-story building shows that these improvements come with only a 2% increase in the material bill, suggesting that the proposed method is compatible with current project budgets as well as design workflow. The authors also provide mathematical justification of the method.

A Three-Dimensional Viscous Transonic Inverse Design Method

2000 ◽  
Author(s):  
W. T. Tiow ◽  
M. Zangeneh
Keyword(s):  
Design Method ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Viscous Effects ◽  
Flow Equations ◽  
Flow Solution ◽  
Turbomachinery Blades ◽  
A Cell ◽  
Inverse Design Method ◽  
Euler Solver

The development and application of a three-dimensional inverse methodology is presented for the design of turbomachinery blades. The method is based on the mass-averaged swirl, rV~θ distribution and computes the necessary blade changes directly from the discrepancies between the target and initial distributions. The flow solution and blade modification converge simultaneously giving the final blade geometry and the corresponding steady state flow solution. The flow analysis is performed using a cell-vertex finite volume time-marching algorithm employing the multistage Runge-Kutta integrator in conjunction with accelerating techniques (local time stepping and grid sequencing). To account for viscous effects, dissipative forces are included in the Euler solver using the log-law and mixing length models. The design method can be used with any existing solver solving the same flow equations without any modifications to the blade surface wall boundary condition. Validation of the method has been carried out using a transonic annular turbine nozzle and NASA rotor 67. Finally, the method is demonstrated on the re-design of the blades.

scholarly journals Implementation of Protocol Stack for Three-Dimensional Wireless Sensor Network

2016 ◽  
Vol 89 ◽  
pp. 193-202 ◽  
Author(s):  
Abhishek Joshi ◽  
Sarang Dhongdi ◽  
K.R. Anupama ◽  
Pritish Nahar ◽  
Rishabh Sethunathan
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Three Dimensional ◽  
Wireless Sensor ◽  
Protocol Stack

Calculation and Design Method Study of the Coil-Wound Heat Exchanger

2014 ◽  
Vol 1008-1009 ◽  
pp. 850-860 ◽  
Author(s):  
Zhou Wei Zhang ◽  
Jia Xing Xue ◽  
Ya Hong Wang
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Heat Exchanger ◽  
Design Method ◽  
Fluid Velocity ◽  
Exchange Process ◽  
Three Dimensional ◽  
Simulation Method ◽  
Physical Parameters ◽  
Numerical Result

A calculation method for counter-current type coil-wound heat exchanger is presented for heat exchange process. The numerical simulation method is applied to determine the basic physical parameters of wound bundles. By controlling the inlet fluid velocity varying in coil-wound heat exchanger to program and calculate the iterative process. The calculation data is analyzed by comparison of numerical result and the unit three dimensional pipe bundle model was built. Studies show that the introduction of numerical simulation can simplify the pipe winding process and accelerate the calculation and design of overall configuration in coil-wound heat exchanger. This method can be applied to the physical modeling and heat transfer calculation of pipe bundles in coil wound heat exchanger, program to calculate the complex heat transfer changing with velocity and other parameters, and optimize the overall design and calculation of spiral bundles.

scholarly journals Mesh-Type Three-Dimensional (3D) Printing of Human Organs and Tumors: Fast, Cost-Effective, and Personalized Anatomic Modeling of Patient-Oriented Visual Aids

2021 ◽  
Vol 11 (3) ◽  
pp. 1047
Author(s):  
Jungirl Seok ◽  
Sungmin Yoon ◽  
Chang Hwan Ryu ◽  
Junsun Ryu ◽  
Seok-ki Kim ◽  
...  
Keyword(s):  
3D Printing ◽  
3D Modeling ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Tumor Location ◽  
Visual Aids ◽  
Surgical Specimen ◽  
Personalized Care ◽  
Fused Deposition ◽  
Mesh Work

Although three-dimensional (3D)-printed anatomic models are not new to medicine, the high costs and lengthy production times entailed have limited their application. Our goal was developing a new and less costly 3D modeling method to depict organ-tumor relations at faster printing speeds. We have devised a method of 3D modeling using tomographic images. Coordinates are extracted at a specified interval, connecting them to create mesh-work replicas. Adjacent constructs are depicted by density variations, showing anatomic targets (i.e., tumors) in contrasting colors. An array of organ solid-tumor models was printed via a Fused Deposition Modeling 3D printer at significantly less cost ($0.05/cm3) and time expenditure (1.73 min/cm3; both, p < 0.001). Printed models helped promote visual appreciation of organ-tumor anatomy and adjacent tissues. Our mesh-work 3D thyroidal prototype reproduced glandular size/contour and tumor location, readily approximating the surgical specimen. This newly devised mesh-type 3D printing method may facilitate anatomic modeling for personalized care and improve patient awareness during informed surgical consent.

Sign in / Sign up

Export Citation Format

Share Document