scholarly journals Experimental Investigation of the Effects of the Gangue Particle Size on the Evolution Rules of Key Seepage Parameters

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Lihua Wang ◽  
Jixiong Zhang ◽  
Yongqi Wei ◽  
Cunli Zhu ◽  
Gaolei Zhu
Keyword(s):  
Numerical Simulation ◽  
Theoretical Foundation ◽  
Solid Wastes ◽  
Practical Significance ◽  
Ecological Environment ◽  
Hydraulic Pressure ◽  
Filling Materials ◽  
Evolution Characteristics ◽  
Simulation Results ◽  
Seepage Characteristics

In order to deal with solid wastes and protect the fragile ecological environment on the ground, using gangues as the filling materials in the underground goaf can not only achieve favorable waste disposal but also alleviate surface subsidence and protect surface buildings and the ecological environment, with great practical significance and application prospects. During the water seepage process, the evolution rules of inner seepage channels in the bulk filling materials are the theoretical foundation for the realization of water-preserved mining. In order to gain clear knowledge of the seepage characteristics of the bulk filling gangues with different sizes, the evolution rules of some seepage parameters mainly including the displacement, the porosity, and the permeability of gangues and hydraulic pressure were analyzed via COMSOL numerical simulation. The evolution rules of the seepage characteristics of the bulk filling materials with different sizes were revealed by combining the present experimental and numerical results. Moreover, the present seepage experiment was proved to be reliable by comparing with numerical simulation results. This work can provide theoretical foundation for investigating the evolution characteristics of inner seepage paths in the bulk filling materials and selecting appropriate bulk filling materials under different stress and seepage environments.

Study of Thermal Stress of Steel Slag Foundation

2015 ◽  
Vol 744-746 ◽  
pp. 606-612
Author(s):  
Tao Wang
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Thermal Stress ◽  
Theoretical Foundation ◽  
Steel Slag ◽  
Measured Temperature ◽  
Actual Situation ◽  
Academic Knowledge ◽  
Simulation Results ◽  
Comprehensive Discussion

Building on the foundation with steel slag as a typical example of the destruction of the thermo-elastic theory to study slag landfill foundation, combining academic knowledge mechanics, heat transfer, etc., the theoretical foundation of slag analysis and numerical simulation of thermal stress, a comprehensive discussion the failure mechanism of the upper part of the foundation of the slag building. On-site measured temperature were fitted by thermal stress analysis of steel slag field, get the corresponding stress-strain cloud. The results show close to the simulation results and the actual situation: simulating thermal stress results slag surface be uplifted 3.77cm, uplifting 5cm of building fundamentals actual.

Avalanche Features in Silicon Schottky-FETs in Accordance with Numerical Simulation Results

2006 ◽  
Vol 65 (16) ◽  
pp. 1533-1546
Author(s):  
Yu. Ye. Gordienko ◽  
S. A. Zuev ◽  
V. V. Starostenko ◽  
V. Yu. Tereshchenko ◽  
A. A. Shadrin
Keyword(s):  
Numerical Simulation ◽  
Simulation Results

Tail shapes lead to different propulsive mechanisms in the body/caudal fin undulation of fish

2020 ◽  
pp. 095440622096768
Author(s):  
Jialei Song ◽  
Yong Zhong ◽  
Ruxu Du ◽  
Ling Yin ◽  
Yang Ding
Keyword(s):  
Numerical Simulation ◽  
Aspect Ratio ◽  
High Efficiency ◽  
The Body ◽  
Caudal Fin ◽  
Fish Model ◽  
Swimming Efficiency ◽  
Simulation Results ◽  
Propulsive Mechanism ◽  
High Depth

In this paper, we investigate the hydrodynamics of swimmers with three caudal fins: a round one corresponding to snakehead fish ( Channidae), an indented one corresponding to saithe ( Pollachius virens), and a lunate one corresponding to tuna ( Thunnus thynnus). A direct numerical simulation (DNS) approach with a self-propelled fish model was adopted. The simulation results show that the caudal fin transitions from a pushing/suction combined propulsive mechanism to a suction-dominated propulsive mechanism with increasing aspect ratio ( AR). Interestingly, different from a previous finding that suction-based propulsion leads to high efficiency in animal swimming, this study shows that the utilization of suction-based propulsion by a high- AR caudal fin reduces swimming efficiency. Therefore, the suction-based propulsive mechanism does not necessarily lead to high efficiency, while other factors might play a role. Further analysis shows that the large lateral momentum transferred to the flow due to the high depth of the high- AR caudal fin leads to the lowest efficiency despite the most significant suction.

scholarly journals Experiment and simulation about the effect of wear-ring abrasion on the performance of a marine centrifugal pump

2021 ◽  
Vol 13 (2) ◽  
pp. 168781402199811
Author(s):  
Wu Xianfang ◽  
Du Xinlai ◽  
Tan Minggao ◽  
Liu Houlin
Keyword(s):  
Numerical Simulation ◽  
Centrifugal Pump ◽  
Pressure Pulsation ◽  
Vibration Velocity ◽  
Test Results ◽  
Obvious Effect ◽  
Performance Change ◽  
Pump Test ◽  
Simulation Results ◽  
Axis Passing

The wear-ring abrasion can cause performance degradation of the marine centrifugal pump. In order to study the effect of front and back wear-ring clearance on a pump, test and numerical simulation were used to investigate the performance change of a pump. The test results show that the head and efficiency of pump decrease by 3.56% and 9.62% respectively at 1.0 Qd due to the wear-ring abrasion. Under 1.0 Qd, with the increase of the front wear-ring the vibration velocity at pump foot increases from 0.4 mm/s to 1.0 mm/s. The axis passing frequency (APF) at the measuring points increases significantly and there appears new characteristic frequency of 3APF and 4APF. The numerical simulation results show that the front wear-ring abrasion affects the flow at the inlet of the front chamber of the pump and impeller passage. And the back wear-ring abrasion has obvious effect on the flow in the back chamber of the pump and impeller passage, while the multi-malfunction of the front wear-ring abrasion and back wear-ring abrasion has the most obvious effect on the flow velocity and flow stability inside pump. The pressure pulsation at Blade Passing Frequency (BPF) of the three schemes all decrease with the increase of the clearance.

scholarly journals Development of Depth-Limited Wave Boundary Layers over a Smooth Bottom

2020 ◽  
Vol 9 (1) ◽  
pp. 27
Author(s):  
Hitoshi Tanaka ◽  
Nguyen Xuan Tinh ◽  
Xiping Yu ◽  
Guangwei Liu
Keyword(s):  
Numerical Simulation ◽  
Boundary Layer ◽  
Boundary Layers ◽  
Wave Motion ◽  
Numerical Study ◽  
Experiment Data ◽  
Tidal Motion ◽  
Long Period ◽  
Simulation Results ◽  
Wave Boundary

A theoretical and numerical study is carried out to investigate the transformation of the wave boundary layer from non-depth-limited (wave-like boundary layer) to depth-limited one (current-like boundary layer) over a smooth bottom. A long period of wave motion is not sufficient to induce depth-limited properties, although it has simply been assumed in various situations under long waves, such as tsunami and tidal currents. Four criteria are obtained theoretically for recognizing the inception of the depth-limited condition under waves. To validate the theoretical criteria, numerical simulation results using a turbulence model as well as laboratory experiment data are employed. In addition, typical field situations induced by tidal motion and tsunami are discussed to show the usefulness of the proposed criteria.

Design of Impeller of Centrifugal Compressor for Water-Air Engine

2014 ◽  
Vol 496-500 ◽  
pp. 642-645
Author(s):  
Yun Wang ◽  
Wei Zhang
Keyword(s):  
Numerical Simulation ◽  
Power System ◽  
Centrifugal Compressor ◽  
Centrifugal Impeller ◽  
3D Design ◽  
Pump Impeller ◽  
Aero Engine ◽  
Simulation Results

In view of power system in water-air UAV requirements, combine with the centrifugal impeller for aero-engine and the pump impeller. The design of a impeller of centrifugal compressor can work on the air and in the water for the new concept of air-water engine. With 3D design and a 3D CFD solver on it and analysis the results of numerical simulation. Results show that the designed impeller successfully reached the goal on the air and in the water. The experiences accumulated in this procedure are useful for similar impeller aerodynamic designs.

The Influence of the Convective Terms Discretization Scheme on the Simulation Results of Architectural Numerical Wind Tunnel

2012 ◽  
Vol 204-208 ◽  
pp. 4884-4887
Author(s):  
Jian Feng Wu ◽  
Cai Hua Wang ◽  
Chang Li Song
Keyword(s):  
Numerical Simulation ◽  
Wind Tunnel ◽  
Building Structures ◽  
Discretization Scheme ◽  
Shape Coefficient ◽  
Fluent Software ◽  
Actual Operation ◽  
Simulation Results ◽  
Load Shape ◽  
Numerical Wind Tunnel Method

The numerical simulation of construction is to obtain the desired accuracy. It depends on the theoretical basis of the calculator and selection of the various important factors in the actual operation. For this problem, this paper adopting the current code for the design of building structures as the comparison standard, using the FLUENT software, taking the numerical simulation results of a high building’s wind load shape coefficient of for example, discussing the influence of four kinds of the convective terms discretization scheme, respectively the first-order upwind, the second order upwind , power law and Quadratic upwind interpolation for convective kinematics, on the simulation results of architectural numerical wind tunnel, provides the reference for the rational use of numerical wind tunnel method.

scholarly journals Numerical Simulation and Experimental Study on Axial Stiffness and Stress Deformation of the Braided Corrugated Hose

2021 ◽  
Vol 11 (10) ◽  
pp. 4709
Author(s):  
Dacheng Huang ◽  
Jianrun Zhang
Keyword(s):  
Numerical Simulation ◽  
Geometric Model ◽  
Equivalent Stress ◽  
Element Model ◽  
Maximum Error ◽  
Structural Features ◽  
Axial Stiffness ◽  
Frictional Stress ◽  
Maximum Equivalent Stress ◽  
Simulation Results

To explore the mechanical properties of the braided corrugated hose, the space curve parametric equation of the braided tube is deduced, specific to the structural features of the braided tube. On this basis, the equivalent braided tube model is proposed based on the same axial stiffness in order to improve the calculational efficiency. The geometric model and the Finite Element Model of the DN25 braided corrugated hose is established. The numerical simulation results are analyzed, and the distribution of the equivalent stress and frictional stress is discussed. The maximum equivalent stress of the braided corrugated hose occurs at the braided tube, with the value of 903MPa. The maximum equivalent stress of the bellows occurs at the area in contact with the braided tube, with the value of 314MPa. The maximum frictional stress between the bellows and the braided tube is 88.46MPa. The tensile experiment of the DN25 braided corrugated hose is performed. The simulation results are in good agreement with test data, with a maximum error of 9.4%, verifying the rationality of the model. The study is helpful to the research of the axial stiffness of the braided corrugated hose and provides the base for wear and life studies on the braided corrugated hose.

NUMERICAL INVESTIGATION OF FILM DISTRIBUTION IN HORIZONTAL-TUBE FALLING FILM EVAPORATOR

2011 ◽  
Vol 19 (03) ◽  
pp. 177-183 ◽  
Author(s):  
JIN-BO CHEN ◽  
QING-GANG QIU
Keyword(s):  
Numerical Simulation ◽  
Fluid Flow ◽  
Film Thickness ◽  
Liquid Film ◽  
Numerical Investigation ◽  
Horizontal Tube ◽  
Flow Density ◽  
Falling Film ◽  
Film Distribution ◽  
Simulation Results

The technique of horizontal-tube falling film has been used in the cooling and heating industries such as refrigeration systems, heating systems and ocean thermal energy conversion systems. The comprehensive performance of evaporator is directly affected by the film distribution characteristics outside tubes. In this paper, numerical investigation was performed to predict the film characteristics outside the tubes in horizontal-tube falling film evaporator. The effects of liquid flow rate, tube diameter and the circular degree of tube on the film thickness were presented. The numerical simulation results were compared with that of the empirical equations for calculating the falling film thickness, and agreements between them were reasonable. Numerical simulation results show that, at the fixed fluid flow density, the liquid film is thicker on the upper and lower tube and the thinnest liquid film appears at angle of about 120°. The results also indicate that, when the fluid flow density decreases to a certain value, the local dryout spot on the surface of the tube would occur. In addition, the film thickness decreases with the increases of the tube diameter at the fixed fluid flow density.

Sign in / Sign up

Export Citation Format

Share Document