scholarly journals Design and Analysis of Cooperative Broadcast Scheme Based on Reliability in Mesh Network

2021 ◽  
Vol 2021 ◽  
pp. 1-18
Author(s):  
Zufang Dou ◽  
Jianwen Tian ◽  
Qiaoli Yang ◽  
Liben Yang
Keyword(s):  
Energy Saving ◽  
Data Transmission ◽  
Performance Indicators ◽  
Reliable Data ◽  
Mesh Network ◽  
Collaborative Technology ◽  
Broadcast Storm ◽  
Performance Indexes ◽  
The Cost ◽  
First Time

In order to ensure reliable data transmission of sender, the tree-based network is extended to Mesh network by collaborative technology, and the SW-HBH-CARQ broadcast scheme is introduced for the first time. Then, in order to solve the problems of broadcast storm and energy saving, SW-HBH-oiCARQ, SW-HBH-ieCARQ, and SW-HBH-oieCARQ are further proposed. Then, the four broadcasting schemes are analyzed quantitatively, and the performance indicators such as system energy consumption and time delay are obtained. Finally, the relationships between the performance indexes and the parameters are discussed by numerical simulation. At the same time, the effectiveness of the proposed schemes in energy saving is verified by comparing with the corresponding noncollaborative broadcasting scheme. However, the latency of proposes scheme is greater than uncooperative scheme, which is the cost of saving energy and resolving broadcast storms.

An Evaluation of Provincial Macroeconomic Performance in Vietnam

2017 ◽  
pp. 34-47
Author(s):  
Hoi Le Quoc ◽  
Nam Pham Xuan ◽  
Tuan Nguyen Anh
Keyword(s):  
Development Strategy ◽  
Institutional Transformation ◽  
Economic Indicators ◽  
Macroeconomic Performance ◽  
Economic Development Strategy ◽  
Socio Economic Development ◽  
The Cost ◽  
Development Objectives ◽  
First Time

The study was targeted at developing a methodology for constructing a macroeconomic performance index at a provincial level for the first time in Vietnam based on 4 groups of measurements: (i) Economic indicators; (ii) oriented economic indicators; (iii) socio-economic indicators; and (iv) economic - social – institutional indicators. Applying the methodology to the 2011 - 2015 empirical data of all provinces in Vietnam, the research shows that the socio-economic development strategy implemented by those provinces did not provide balanced outcomes between growth and social objectives, sustainability and inclusiveness. Many provinces focused on economic growth at the cost of structural change, equality and institutional transformation. In contrast, many provinces were successful in improving equality but not growth. Those facts threaten the long-term development objectives of the provinces.

The Use of Port Performance Indexes in the Transport Economy and the Strengthening of Port Competitiveness

2019 ◽  
Vol 10 (5) ◽  
pp. 387-394
Author(s):  
Astrida Rijkure ◽  
Keyword(s):  
Quality Assurance ◽  
Performance Indicators ◽  
Management Practices ◽  
International Competitiveness ◽  
International Experience ◽  
Multimodal Integration ◽  
Pricing Policies ◽  
Performance Indexes ◽  
Quality Assurance Process ◽  
Assurance Process

Ports in the transport economy have an important role to play in the competitiveness of ports. There is an increasing climate of competition, which causes ports to invest in development and to improve their transport corridors, governance principles and pricing policies in order to strengthen international competitiveness of ports and to ensure that their management practices are in line with the positive international experience. In order to increase the efficiency of transport, to promote the use of environmentally friendly technologies and to improve the international competitiveness of port transport corridors, it is important for ports to determine their own KPI indicators that would be used to assess port performance indicators. As ports are responsible for the quality assurance of port services, even if they do not provide such services, monitoring and assessing of the KPI must be part of the quality assurance process. The objective of this study is to define the port performance-enhancing KPI indexes and to make suggestions for how KPI application in the transport economy can strengthen the international competitiveness of ports and ensure that their management practises international experience. The study’s tasks are to define the appropriate KPI indexes, group them according to interlinked principles, and provide proposals on how to use them to improve the international competitiveness of ports and the main transport system multimodal integration.

Modernization of Water Treatment System at Agricultural Enterprises Due to Introduction of Solar Energy

2020 ◽  
Vol 67 (1) ◽  
pp. 142-147
Author(s):  
Alina A. Aleksandrova ◽  
Maksim S. Zhuzhin ◽  
Yuliya M. Dulepova
Keyword(s):  
Mathematical Model ◽  
Water Treatment ◽  
Solar Energy ◽  
Energy Saving ◽  
Electric Energy ◽  
Solar Water Heater ◽  
Water Heater ◽  
Agricultural Enterprises ◽  
Solar Water ◽  
The Cost

Energy saving today is an integral part of the development strategy of agricultural organizations. Considerable attention is paid to the modernization and automation of technological processes in agricultural enterprises, which can improve the quality of work and reduce the cost of production. The direction of modernization is to reduce the consumption of electric energy by improving the water treatment system in livestock complexes. (Research purpose) The research purpose is to determine the potential of solar energy used in the Nizhny Novgorod region and to determine the possibility of its use for water heating in livestock complexes and to consider the cost-effectiveness of using a device to heat water through solar energy. (Materials and methods) Authors used an improved algorithm of Pixer and Laszlo, applied in the NASA project «Surface meteorology and Energy», which allows to calculate the optimal angle of inclination of the device for heating water. (Results and discussion) Designed a mock-up of a livestock complex with a solar water heater installed on the roof, protected by patent for invention No. 2672656. A mathematical model was designed experimentally to predict the results of the plant operation in non-described modes. (Conclusions) The article reveales the optimal capacity of the circulation pump. Authors have created a mathematical model of the device that allows to predict the water heating in a certain period of time. The article presents the calculations on the energy and economic efficiency of using a solar water heater. An electric energy saving of about 30 percent, in the economic equivalent of 35 percent.

scholarly journals Autism Tsunami: the Impact of Rising Prevalence on the Societal Cost of Autism in the United States

2021 ◽  
Author(s):  
Mark Blaxill ◽  
Toby Rogers ◽  
Cynthia Nevison
Keyword(s):  
Forecast Model ◽  
The United States ◽  
Population Projections ◽  
Base Case ◽  
Prevention Strategies ◽  
Total Base ◽  
Cost Categories ◽  
The Cost ◽  
The Impact ◽  
First Time

AbstractThe cost of ASD in the U.S. is estimated using a forecast model that for the first time accounts for the true historical increase in ASD. Model inputs include ASD prevalence, census population projections, six cost categories, ten age brackets, inflation projections, and three future prevalence scenarios. Future ASD costs increase dramatically: total base-case costs of $223 (175–271) billion/year are estimated in 2020; $589 billion/year in 2030, $1.36 trillion/year in 2040, and $5.54 (4.29–6.78) trillion/year by 2060, with substantial potential savings through ASD prevention. Rising prevalence, the shift from child to adult-dominated costs, the transfer of costs from parents onto government, and the soaring total costs raise pressing policy questions and demand an urgent focus on prevention strategies.

scholarly journals A METHODOLOGY TO SUPPORT COMPANIES IN THE FIRST STEPS TOWARDS DE-MANUFACTURING

2021 ◽  
Vol 1 ◽  
pp. 131-140
Author(s):  
Federica Cappelletti ◽  
Marta Rossi ◽  
Michele Germani ◽  
Mohammad Shadman Hanif
Keyword(s):  
Environmental Impact ◽  
End Of Life ◽  
Design Stage ◽  
Life Strategies ◽  
Disassembly Sequence ◽  
The Status ◽  
The Cost ◽  
Technical Solutions ◽  
First Time ◽  
Complex Activities

AbstractDe-manufacturing and re-manufacturing are fundamental technical solutions to efficiently recover value from post-use products. Disassembly in one of the most complex activities in de-manufacturing because i) the more manual it is the higher is its cost, ii) disassembly times are variable due to uncertainty of conditions of products reaching their EoL, and iii) because it is necessary to know which components to disassemble to balance the cost of disassembly. The paper proposes a methodology that finds ways of applications: it can be applied at the design stage to detect space for product design improvements, and it also represents a baseline from organizations approaching de-manufacturing for the first time. The methodology consists of four main steps, in which firstly targets components are identified, according to their environmental impact; secondly their disassembly sequence is qualitatively evaluated, and successively it is quantitatively determined via disassembly times, predicting also the status of the component at their End of Life. The aim of the methodology is reached at the fourth phase when alternative, eco-friendlier End of Life strategies are proposed, verified, and chosen.

A standardized terminology of spines in the order Siluriformes (Actinopterygii: Ostariophysi)

2021 ◽  
Author(s):  
Gustavo A Ballen ◽  
Mario C C De Pinna
Keyword(s):  
Comparative Anatomy ◽  
Appendicular Skeleton ◽  
Extensive Literature ◽  
Direct Examination ◽  
Dorsal Fin ◽  
Anatomical Nomenclature ◽  
Standardized Terminology ◽  
The Cost ◽  
First Time ◽  
Terminology System

Abstract A standardized terminology for the anatomy of pectoral- and dorsal-fin spines in the order Siluriformes is proposed based on an extensive literature review and direct examination of representatives of the order. The adult anatomy of the spines is described in detail. Terminology of various spine parts are reviewed and standardized, each term provided with a synonymic list organizing previous usage. Most of the structures treated have been recorded and named in the literature, but some are herein named for the first time. A quantitative approach is proposed for orienting decisions on name usage, aiming at minimizing differences between the terminology proposed and the vast amount of pre-existing literature, herein called the cost function. It is expected that this system will aid efforts in organizing the chaotic anatomical nomenclature of the appendicular skeleton in Siluriformes, and provide a solid basis for advances in comparative anatomy and nomenclature. The proposed terminology system has potential application on a number of fields that utilize information from catfish spines, ranging from taxonomy to phylogenetic systematics to paleontology and archaeology.

scholarly journals Simplified Mathematical Modelling of Uncertainty: Cost-Effectiveness of COVID-19 Vaccines in Spain

Mathematics ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 566
Author(s):  
Julio Emilio Marco-Franco ◽  
Pedro Pita-Barros ◽  
Silvia González-de-Julián ◽  
Iryna Sabat ◽  
David Vivas-Consuelo
Keyword(s):  
Cost Effectiveness ◽  
Health Planning ◽  
Cost Effective ◽  
Incremental Cost Effectiveness Ratio ◽  
Reliable Data ◽  
Simplified Model ◽  
Fatality Rate ◽  
Cost Effectiveness Ratio ◽  
Funeral Homes ◽  
The Cost

When exceptional situations, such as the COVID-19 pandemic, arise and reliable data is not available at decision-making times, estimation using mathematical models can provide a reasonable reckoning for health planning. We present a simplified model (static but with two-time references) for estimating the cost-effectiveness of the COVID-19 vaccine. A simplified model provides a quick assessment of the upper bound of cost-effectiveness, as we illustrate with data from Spain, and allows for easy comparisons between countries. It may also provide useful comparisons among different vaccines at the marketplace, from the perspective of the buyer. From the analysis of this information, key epidemiological figures, and costs of the disease for Spain have been estimated, based on mortality. The fatality rate is robust data that can alternatively be obtained from death registers, funeral homes, cemeteries, and crematoria. Our model estimates the incremental cost-effectiveness ratio (ICER) to be 5132 € (4926–5276) as of 17 February 2021, based on the following assumptions/inputs: An estimated cost of 30 euros per dose (plus transport, storing, and administration), two doses per person, efficacy of 70% and coverage of 70% of the population. Even considering the possibility of some bias, this simplified model provides confirmation that vaccination against COVID-19 is highly cost-effective.

scholarly journals Legal Complexities of Animal Welfare in Australia: Do On-Animal Sensors Offer a Future Option?

Animals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 91
Author(s):  
Jaime Manning ◽  
Deborah Power ◽  
Amy Cosby
Keyword(s):  
Animal Welfare ◽  
Data Transmission ◽  
Continuous Measurement ◽  
Mental Wellbeing ◽  
Value Proposition ◽  
Data Governance ◽  
Behavioural State ◽  
A Value ◽  
Welfare Measures ◽  
The Cost

The five freedoms and, more recently, the five domains of animal welfare provide internationally recognised frameworks to evaluate animal welfare practices which recognise both the physical and mental wellbeing needs of animals, providing a balanced view of their ability to cope in their environment. Whilst there are many techniques to measure animal welfare, the challenge lies with how best to align these with future changes in definitions and expectations, advances in science, legislative requirements, and technology improvements. Furthermore, enforcement of current animal welfare legislation in relation to livestock in Australia and the reliance on self-audits for accreditation schemes, challenges our ability to objectively measure animal welfare. On-animal sensors have enormous potential to address animal welfare concerns and assist with legislative compliance, through continuous measurement and monitoring of an animal’s behavioural state and location being reflective of their wellbeing. As reliable animal welfare measures evolve and the cost of on-animal sensors reduce, technology adoption will increase as the benefits across the supply chain are realised. Future adoption of on-animal sensors by producers will primarily depend on a value proposition for their business being clear; algorithm development to ensure measures are valid and reliable; increases in producer knowledge, willingness, and trust in data governance; and improvements in data transmission and connectivity.

Sign in / Sign up

Export Citation Format

Share Document