scholarly journals Failure Analysis of Deep Composite Roof Roadway and Support Optimization of Anchor Cable Parameters

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Chen Li ◽  
Wenlong Zhang ◽  
Tianhong Huo ◽  
Rui Yu ◽  
Xidong Zhao ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Theoretical Analysis ◽  
Underground Mining ◽  
Field Monitoring ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Economic Damage ◽  
Anchor Cable ◽  
Stress Diffusion ◽  
The Stability

The stability of the roadway surrounding rock is the key factor of underground mining. Roof subsidence occurred during roadway excavation in the Menkeqing Coal Mine. For the sake of safety, it was decided to stop tunneling project and strengthen roadway support, which resulted in a delay of the construction period and economic damage. To maintain the stability of the surrounding rock, we carried out a systematic study through field monitoring, theoretical analysis, and numerical simulation. The deformation and failure law of the surrounding rock, roof structure characteristics, and mechanical properties of the surrounding rock were obtained by field monitoring. The failure characteristics and forms of deep composite roof roadway are further analyzed. The key points of stability of the roadway surrounding rock of soft rock composite laminated roof are obtained by theoretical analysis, i.e., improving the effective stress diffusion efficiency of the anchor cable through the reasonable arrangement of the anchor cable. We use FLAC numerical simulation software to study the influence of different supporting parameters of anchor cable on the stress diffusion in the surrounding rock and put forward the optimal parameters. The optimized support parameters have been applied in the field, and the ideal results have been obtained.

scholarly journals Roof Failure Mechanism and Control Technology of Large Section Open-Off Cut in Soft Rock Strata with Thin Thickness

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Chen Li ◽  
Jun Li ◽  
Xiaoyong Lian ◽  
Yongen Li ◽  
Qi Xue ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Failure Mechanism ◽  
Underground Mining ◽  
Soft Rock ◽  
Mechanical Analysis ◽  
Field Monitoring ◽  
Surrounding Rock ◽  
Engineering Practice ◽  
Control Effect ◽  
Rock Strata

The open-off cut is used for equipment installation of working face before underground mining, and its sectional size is larger than that of the mining roadway. Therefore, the stability of open-off cut surrounding rock determines whether the panel can be put into operation. To solve the roof instability of open-off cut in the Wanli No.1 coal mine, the roof failure mechanism of open-off cut under weak composite rock strata with thin thickness was studied by field monitoring, theoretical analysis, and numerical simulation. First, the characteristics of surrounding rock and the basic law of strata behaviors were obtained by detailed field monitoring. Afterward, FLAC3D numerical simulation and mechanical analysis were used to obtain the main mechanical control parameters of surrounding rock instability, and the existence of a soft interlayer above the roof is the main cause of roof instability. Based on this, the supporting parameters of the open-off cut were optimized and adjusted. The optimized parameters were applied to the adjacent 31207 open-off cut. The engineering practice showed that the optimized supporting parameters have an ideal control effect on roof stability.

Stability Analysis of Tunnel during the Excavation Based on ANSYS

2014 ◽  
Vol 577 ◽  
pp. 1135-1138
Author(s):  
Bing He ◽  
Guang Zhi Yin
Keyword(s):  
Numerical Simulation ◽  
Stability Analysis ◽  
Stress Condition ◽  
Stability Control ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Geological Condition ◽  
Rock Stability ◽  
Before And After ◽  
The Stability

This paper combines the geological condition of Miaoziwan tunnel and numerical simulation software ANSYS to analyze the displacement and stress condition of surrounding rock before and after the excavation. Furthermore, the stability of overlying rock in the tunnel was studied based on the displacement and stress condition of surrounding rock. The breaking law of overlying rock was studied considering the influencing factors to the stability of surrounding. The study and analysis to the breaking law of overlying rock can be helpful to the improvement of surrounding rock stability control and supporting system. Moreover, the result can be the guidance to the excavation.

scholarly journals Study of the stability of tunnel construction based on double-heading advance construction method

2020 ◽  
Vol 12 (1) ◽  
pp. 168781401989696 ◽  
Author(s):  
Zhanping Song ◽  
Guilin Shi ◽  
Baoyun Zhao ◽  
Keming Zhao ◽  
Junbao Wang
Keyword(s):  
Numerical Simulation ◽  
Construction Method ◽  
Field Monitoring ◽  
Surrounding Rock ◽  
Tunnel Construction ◽  
Successful Implementation ◽  
Simulation Results ◽  
The Stability ◽  
Sand Stratum ◽  
The Right

The deformation and significant settlement of surrounding rock often occur during tunnel construction with the condition of abundant water and weak cementing sand. In order to study the construction method and stability under such soft stratum, this article takes Taoshuping tunnel as the engineering background and puts forward a new tunnel construction method—double-heading advance construction method by comparing the advantages and disadvantages of various traditional construction schemes. The numerical simulation of tunnel construction process using this method is carried out to illustrate the rationality and feasibility of the method. The conclusions are drawn by comparing the numerical simulation results with the field monitoring data analysis. The numerical simulation results show that the maximum settlement value caused by excavation construction is in the parts 5 and 6 of the upper half-section and the part 7 of the central section. The settlement values of parts 5, 6, and 7 accounted for 32.4%, 24.3%, and 18.9% of the total settlement values, respectively. So, the supporting measures for double-heading advance excavation construction of these three parts should be strengthened properly. The stress of the right hance changes greatly before and after the demolition of temporary support. The maximum positive value of stress is 23 kPa and the maximum negative value of stress is −32 kPa. Therefore, the length of temporary bracing should be strictly controlled during construction and the monitoring of the right hance area should be strengthened. Furthermore, it is necessary to strengthen the supporting measures and monitoring in the right spandrel area as the surrounding rock pressure in the right spandrel area is higher than the left spandrel area. The optimum excavation height of the upper half-section in Taoshuping tunnel is determined to be 5.4 m and the reasonable excavation distance between parts 1 and 5 is determined to be 25–30 m by parameter optimization. Finally, the variation law of numerical simulation and field monitoring results is consistent, which shows that the double-heading advance construction method has a better effect on the stability control of surrounding rock, and the rationality and feasibility of this method are validated effectively. Therefore, the double-heading advance method is suitable for tunnel construction in the sand stratum with rich water and weak cementation, and the successful implementation of this method in Taoshuping tunnel also provides a reference for subsequent tunnel construction in the sand stratum with rich water and weak cementation.

scholarly journals Numerical Simulation and Analysis of Tunnel Failure Mode by Stochastic Fracture Model

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Fukun Xiao ◽  
Lei Xu ◽  
Gang Liu ◽  
Zhiyuan Hou ◽  
Le Xing
Keyword(s):  
Numerical Simulation ◽  
Rock Burst ◽  
Monte Carlo Model ◽  
High Stress ◽  
Tectonic Stress ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Structural Plane ◽  
Dip Angle ◽  
The Stability

The dip angle, length, spacing, and fracture distance of rock fissure affect the morphology of roadway after collapse. The numerical simulation software CDEM is used to simulate the morphology of roadway collapse. The Monte Carlo model is used to simulate different types of crack models in two-dimensional plane and generate different crack models. The effects of crack angle, crack length, fracture distance, and spacing on the deformation of surrounding rock are analyzed. The influence of different rock burst on the failure strap-fall modes of fissure roadway and roadway in different sections is analyzed, and the stability law of roadway is studied. Under the condition of high stress, the roadway shape has little influence on the distribution of the principal stress difference of surrounding rock, but the equivalent excavation radius determines the distribution of the plastic zone of surrounding rock. The larger the ineffective reinforcement zone is, the larger the deformation around the roadway will be. The decrease of the angle between the structural plane and the vertical stress increases the failure range of the roadway under the gravity burst pressure. Under the horizontal tectonic stress type rock burst, when the structural plane inclination angle is 0°, the two-sided caving body fills the roadway and the roof caving range becomes smaller.

The Numerical Study of the Stability of Roadway Seeping in the Roof

2012 ◽  
Vol 178-181 ◽  
pp. 1293-1296
Author(s):  
Feng Zhen Liu ◽  
Wei Guo Qiao
Keyword(s):  
Numerical Simulation ◽  
Stress Distribution ◽  
Plastic Zone ◽  
Numerical Study ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Key Factors ◽  
Roadway Stability ◽  
The Stability ◽  
Roadway Deformation

Seepage in the roof is one of main reasons resulting softening rock and roadway deformation, in order to make sure about the influence of seepage on the roadway stability, we established corresponding models by using numerical simulation software, and analyzed the stress distribution, the deformation of surrounding rock, and the distribution range and shape of the plastic zone, the results show that water is one of the key factors to influence the stability of roadway, seepage makes the strength of surrounding rock sharply reduce, and the roof, two ribs and floor appear serious deformation.

Numerical Simulation Analysis of the Nanyangpo Coal Mine Anchor Support Method

2012 ◽  
Vol 619 ◽  
pp. 231-238
Author(s):  
Mei Chang Zhang ◽  
Peng Cheng Fei ◽  
De Long Zou
Keyword(s):  
Numerical Simulation ◽  
Simulation Analysis ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Nursing Program ◽  
Load Carrying ◽  
Deformation Law ◽  
The Stability ◽  
Surrounding Rock Deformation ◽  
Bolt Support

The bolt support is important to ensure the stability of surrounding rock. Of Nan Yangpo mines as the research background. The application of numerical simulation software FLAC3D mine deep Bolt bolt support after the surrounding rock deformation law of the numerical simulation, Comparison and analysis of rock displacement and plastic zone under the support program changes. The results show that, The third bolt support nursing program, Significantly improve the strength and load carrying capacity of the surrounding rock, Effectively control the damage of the deep tunnel deformation that can control the roof of 4101 the return airway and two to help the stability.

scholarly journals Study on Anchor Cable instead of Single Hydraulic Prop Support in Advance Support of Deep Roadway

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Wenpeng Su ◽  
Boyang Zheng ◽  
Pengfei Jiang
Keyword(s):  
Numerical Simulation ◽  
Coal Mine ◽  
Field Monitoring ◽  
Surrounding Rock ◽  
Deformation Characteristics ◽  
Deep Mine ◽  
Decrease Rate ◽  
Anchor Cable ◽  
Working Face ◽  
Hydraulic Prop

In order to solve the problems of complicated advanced support process, high labor intensity, affecting the rapid advance of working face and the destruction of roof bolt (cable) by advance single hydraulic prop in ultra kilometer deep mine roadway, the deformation characteristics of roadway surrounding rock is analyzed. Taking the 27304 working face of Wanglou coal mine as the engineering background, numerical simulation, field monitoring, and theoretical calculation were used to analyze the deformation characteristics of roadway surrounding rock within the advanced influence range of 27304 working face. This paper puts forward the active advance support technology scheme, in which grouting anchor cable replaces the existing single hydraulic prop in the advance influence range of the working face in the ultra-kilometer deep mine, and observes and analyzes the deformation and failure characteristics of the surrounding rock of the working face advance roadway. The numerical simulation results show that in the advanced influence range of deep roadway, grouting anchor cable was used to replace the previous single hydraulic prop, and the vertical stress at both ends of the working face decreased by 15 MPa, with a decrease rate of 33.3%; the displacement of roadway roof, floor, and two sides decreased by 10 mm, 55 mm, and 20 mm, with a decrease rate of 40%, 68.75%, and 47.6%, respectively. The field monitoring results show that the roof separation is obviously improved after using grouting anchor cable as the active advance support scheme. It solves the problem of safe and efficient production faced by the ultra-kilometer deep shaft in Wanglou coal mine and provides theoretical and technical support for unmanned double roadway advance support under the condition of safe and efficient mining.

scholarly journals Study on instability failure mode and monitoring early warning standard of surrounding rock in fully weathered argillaceous sandstone section of large section tunnel

2019 ◽  
Vol 136 ◽  
pp. 04023
Author(s):  
Ming Zhao ◽  
Ke Li ◽  
Hong Yan Guo ◽  
KaiCheng Hua
Keyword(s):  
Limit State ◽  
Stable State ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Large Section ◽  
Rock Stability ◽  
Geological Conditions ◽  
Construction Step ◽  
The Face ◽  
The Stability

Based on the special geological conditions of a tunnel in Qingyuan section of Huizhou-Zhanzhou Expressway, FLAC3d numerical simulation software is used to simulate the rheological properties and instability of surrounding rock in large-section fully weathered sandstone section, and the stability and loss of surrounding rock are analyzed. The deformation of the dome and the face at steady state is analyzed. It is found that: 1) when the surrounding rock is in a stable state, the deformation curve of the dome is smooth. When the surrounding rock of the face is unstable, the front of the face appears ahead. Deformation should be first strengthened on the surrounding rock in front of the face. 2) The arched foot is an important part of the instability of the surrounding rock. In order to prevent the expansion of the collapsed part, the arched part should be reinforced. 3) In order to obtain the limit state of surrounding rock stability, the strength of surrounding rock is reduced, and the strength reduction coefficient corresponding to the displacement sudden point is taken as the safety factor of rock stability around the hole, and the stability safety coefficients of surrounding rock of each construction step are greater than 1.2. 4) The dynamic standard values of deformation control in the whole construction stage are obtained by analyzing the deformation curves of each data monitoring point with time in the corresponding time period of each construction step.

Application of ABAQUS in Surrounding Rock Stability Analysis of Shallow Large Cross-Section Tunnel

2015 ◽  
Vol 777 ◽  
pp. 8-12 ◽  
Author(s):  
Lin Zhen Cai ◽  
Cheng Liang Zhang
Keyword(s):  
Numerical Simulation ◽  
Rock Mass ◽  
Strong Support ◽  
Surrounding Rock ◽  
Tunnel Engineering ◽  
Tunnel Excavation ◽  
Rock Stability ◽  
Rock Bolting ◽  
Excavation Support ◽  
The Stability

HuJiaDi tunnel construction of Dai Gong highway is troublesome, the surrounding-rock mass give priority to full to strong weathering basalt, surrounding rock integrity is poor, weak self-stability of surrounding rock, and tunnel is prone to collapse. In order to reduce disturbance, taking advantage of the ability of rock mass, excavation adopt the method of "more steps, short footage and strong support". The excavation method using three steps excavation, The excavation footage is about 1.2 ~ 1.5 m; The surrounding rock bolting system still produce a large deformation after completion of the first support construction, it shows that the adopted support intensity cannot guarantee the stability of the tunnel engineering. Using ABAQUS to simulate tunnel excavation support, optimizing the support parameters of the tunnel, conducting comparative analysis with Monitoring and Measuring and numerical simulation results, it shows that the displacement - time curves have a certain consistency in numerical simulation of ABAQUS and Monitoring and Measuring.

scholarly journals Surrounding Rock Movement of Steeply Dipping Coal Seam Using Backfill Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Wenyu Lv ◽  
Kai Guo ◽  
Jianhao Yu ◽  
Xufeng Du ◽  
Kun Feng
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Surrounding Rock ◽  
Maximum Deflection ◽  
Coal Seams ◽  
Physical Similarity ◽  
Working Face ◽  
Rock Structure ◽  
Backfill Mining ◽  
The Stability

The movement of the overlying strata in steeply dipping coal seams is complex, and the deformation of roof rock beam is obvious. In general, the backfill mining method can improve the stability of the surrounding rock effectively. In this study, the 645 working face of the tested mine is used as a prototype to establish the mechanical model of the inclined roof beam using the sloping flexible shield support backfilling method in a steeply dipping coal seam, and the deflection equation is derived to obtain the roof damage structure and the maximum deflection position of the roof beam. Finally, numerical simulation and physical similarity simulation experiments are carried out to study the stability of the surrounding rock structure under backfilling mining in steeply dipping coal seams. The results show the following: (1) With the support of the gangue filling body, the inclined roof beam has smaller roof subsidence, and the maximum deflection position moves to the upper part of working face. (2) With the increase of the stope height, the stress and displacement field of the surrounding rock using the backfilling method show an asymmetrical distribution, the movement, deformation, and failure increase slowly, and the increase of the strain is relatively stable. Compared with the caving method, the range and degree of the surrounding rock disturbed by the mining stress are lower. The results of numerical simulation and physical similarity simulation experiment are generally consistent with the theoretically derived results. Overall, this study can provide theoretical basis for the safe and efficient production of steeply dipping coal seams.

Sign in / Sign up

Export Citation Format

Share Document