scholarly journals Study on Anchor Cable instead of Single Hydraulic Prop Support in Advance Support of Deep Roadway

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Wenpeng Su ◽  
Boyang Zheng ◽  
Pengfei Jiang
Keyword(s):  
Numerical Simulation ◽  
Coal Mine ◽  
Field Monitoring ◽  
Surrounding Rock ◽  
Deformation Characteristics ◽  
Deep Mine ◽  
Decrease Rate ◽  
Anchor Cable ◽  
Working Face ◽  
Hydraulic Prop

In order to solve the problems of complicated advanced support process, high labor intensity, affecting the rapid advance of working face and the destruction of roof bolt (cable) by advance single hydraulic prop in ultra kilometer deep mine roadway, the deformation characteristics of roadway surrounding rock is analyzed. Taking the 27304 working face of Wanglou coal mine as the engineering background, numerical simulation, field monitoring, and theoretical calculation were used to analyze the deformation characteristics of roadway surrounding rock within the advanced influence range of 27304 working face. This paper puts forward the active advance support technology scheme, in which grouting anchor cable replaces the existing single hydraulic prop in the advance influence range of the working face in the ultra-kilometer deep mine, and observes and analyzes the deformation and failure characteristics of the surrounding rock of the working face advance roadway. The numerical simulation results show that in the advanced influence range of deep roadway, grouting anchor cable was used to replace the previous single hydraulic prop, and the vertical stress at both ends of the working face decreased by 15 MPa, with a decrease rate of 33.3%; the displacement of roadway roof, floor, and two sides decreased by 10 mm, 55 mm, and 20 mm, with a decrease rate of 40%, 68.75%, and 47.6%, respectively. The field monitoring results show that the roof separation is obviously improved after using grouting anchor cable as the active advance support scheme. It solves the problem of safe and efficient production faced by the ultra-kilometer deep shaft in Wanglou coal mine and provides theoretical and technical support for unmanned double roadway advance support under the condition of safe and efficient mining.

scholarly journals Deviatoric Stress Evolution Laws and Control in Surrounding Rock of Soft Coal and Soft Roof Roadway under Intense Mining Conditions

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Dongdong Chen ◽  
Chunwei Ji ◽  
Shengrong Xie ◽  
En Wang ◽  
Fulian He ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Plastic Zone ◽  
Theoretical Calculations ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Deviatoric Stress ◽  
Anchor Cable ◽  
Soft Coal ◽  
Working Face ◽  
Failure Line

Aiming at the problem of large deformation and instability failure and its control of soft coal and soft roof roadway under intense mining, laboratory experiments, theoretical calculations, Flac3D numerical simulation, borehole peeping, and pressure observation were used to study the deflection characteristics of the deviatoric stress of the gas tailgate and the distribution and failure characteristics of the plastic zone in the mining face considering the strain softening characteristics of the roof and coal of roadway, and then the truss anchor cable-control technology is proposed. The results show the following: (1) The intense mining influence on the working face will deflect the peak deviatoric stress zone (PDSZ) of the surrounding rock of the gas tailgate. The influence distance of PDSZ is about 20 m in advance and 60 m in lag; the PDSZ at the gob side of the roadway is located in the range of 3–5.5 m from the surface of the coal pillar, while the coal wall side is mainly located in the range of 3–4.5 m at the shoulder corner and bottom corner of the solid coal. (2) The intense mining in the working face caused the nonuniform expansion of the surrounding rock plastic area of the gas tailgate. The two shoulder angles of the roadway and the bottom of the coal pillar have the largest damage range, and the maximum damage location is the side angle of the coal pillar (5 m). Angle and bottom angle of coal pillar are the key points of support control. (3) The plastic failure line of the surrounding rock of the gas tailgate is always between the inner and outer contours of the PDSZ, and the rock mass in the PDSZ is in a stable and unstable transition state, so the range of anchor cable support should be cross plastic failure line. (4) The theoretical calculations and numerical simulation results agree well with the drilling peep results. Based on the deflection law of the PDSZ and the expansion characteristics of the plastic zone, a truss anchor cable supporting system with integrated locking and large-scale support function is proposed to jointly control the roof and the two sides, which effectively solves the problem of weak surrounding rock roadway under severe mining deformation control problems realizing safety and efficient production in coal mines under intense mining.

scholarly journals Support design of main retracement passage in fully mechanised coal mining face based on numerical simulation

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yalong Li ◽  
Mohanad Ahmed Almalki ◽  
Cheng Li
Keyword(s):  
Numerical Simulation ◽  
Coal Mine ◽  
Surrounding Rock ◽  
Control Measures ◽  
Coal Face ◽  
Support Design ◽  
Working Face ◽  
Surrounding Rock Control ◽  
Mining Face ◽  
Mining Pressure

Abstract For the comprehensive mechanised coal mining technology, the support design of the main withdrawal passage in the working face is an important link to achieve high yield and efficiency. Due to the impact of mining, the roof movement of the withdrawal passage is obvious, the displacement of the coal body will increase significantly, and it is easy to cause roof caving and serious lamination problems, and even lead to collapse accidents, which will affect the normal production of the mine. In this paper, the mining pressure development law of the main withdrawal passage support under the influence of dynamic pressure is designed, the most favourable roof failure form of the withdrawal passage is determined, and the action mechanism and applicable conditions of different mining pressure control measures are studied. The pressure appearance and stress distribution in the final mining stage of fully mechanised coal face are studied by numerical simulation. The deformation and failure characteristics and control measures of roof overburden in the last mining stage of fully mechanised coal face are analysed theoretically. Due to the fact that periodic pressure should be avoided as far as possible after the full-mechanised mining face is connected with the retracement passage, some auxiliary measures such as mining height control and forced roof blasting are put forward on this basis. The relative parameters of the main supporting forms are calculated. The main retracement of a fully mechanised working face in a coal mine channel is put forward to spread the surrounding rock grouting reinforcement, reinforcing roof, and help support and improve the bolt anchoring force, the main design retracement retracement channels in the channel near the return air along the trough for supporting reinforcing surrounding rock control optimisation measures, such as through the numerical simulation analysis, the optimisation measures for coal mine fully mechanised working face of surrounding rock is feasible. Numerical simulation results also show that the surrounding rock control of fully mechanised working face of coal mine design improvements, its main retreat channel under the roof subsidence, cribbing shrank significantly lower, and closer, to better control the deformation of surrounding rock, achieved significant effect, to ensure the safety of coal mine main retracement channel of fully mechanised working face support.

scholarly journals Analysis of Roof Deformation Mechanism and Control Measures with Roof Cutting and Pressure Releasing in Gob-Side Entry Retaining

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Bing-Jun Sun ◽  
Xin-Zhu Hua ◽  
Yan Zhang ◽  
Jiadi Yin ◽  
Kai He ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Coal Mine ◽  
Surrounding Rock ◽  
Cutting Angle ◽  
Working Face ◽  
Support Resistance ◽  
Key Block ◽  
Cutting Height ◽  
Basic Roof ◽  
Roof Support

The mechanical model of the basic roof fracture structure is established on the basis of key block theory to study the roof breaking mechanism of gob-side entry retaining under roof cutting and pressure relief, and the analytical formula of roof support resistance is derived when the key block of the basic roof is stable. The influence of roof cutting angle and cutting height on roof support resistance is also analyzed. Determining the cutting seam parameters of the retained roadway roof is necessary to identify the support resistance of the roadway roof due to the correlation between the roof cutting parameters and the support resistance. Taking the II 632 haulage drift of the Hengyuan coal mine as the engineering background, FLAC3D numerical simulation is used in this paper to analyze the influence of different roof cutting angles and cutting heights on the surrounding rock structure evolution of retained roadways. Results show that the roof cutting angle and cutting height respond to the support resistance of the retained roadway roof, and the support resistance required by the roof increases with the roof cutting angle and cutting height. This condition ensures that the side roof of the gob can be cut off smoothly, and the support resistance required by the roof of retained roadways is within a reasonable range. Through theoretical and numerical simulation analysis, the reasonable roof cutting height of II 632 haulage drift is 8 m and the roof cutting angle is 15°. The theoretical analysis and numerical simulation results reveal that the required support resistance to maintain the stability of the roadway roof is 0.38 MPa. The supporting scheme of the roof of the II 632 haulage drift in the Hengyuan coal mine is then designed. Finally, the field industrial test is used for verification. The borehole imaging results show that the overall line of the retained roadway roof is small based on the description of field monitoring results. The deformation of the surrounding rock surface of the retained roadway is less than 100 mm, and the roadway is 40 m from the lagging working face. The deformation rate of surrounding rock decreases with the increase in distance from the working face. The integrity of the retained roadway roof is good, and the deformation of the surrounding rock is effectively controlled.

Numerical Simulation Analysis of Different Coal Mine Roadway Support Effect

2013 ◽  
Vol 807-809 ◽  
pp. 2356-2360 ◽  
Author(s):  
Guang Yi Sun ◽  
Xiao Luo
Keyword(s):  
Numerical Simulation ◽  
Coal Mine ◽  
Simulation Analysis ◽  
Support Effect ◽  
Surrounding Rock ◽  
Anchor Cable ◽  
Mine Roadway ◽  
Coal Wall ◽  
Roadway Support

The application of FLAC2D software long ditch coal mine extraction tunnel without support boltgrouting. Anchor when the anchor rope supporting and strengthening supporting state ofroadwaywere simulated and analyzed the change of roadway surrounding rock under differentsupport forms. Demonstrated the possibility that the current anchor cable anchor supporting andanalysis under the condition of the coal wall broken grouting bolt is the necessity of reinforcement.

Study on Mine Pressure Behavior of Roadway in Highly Irregular Working Face in Daizhuang Coal Mine

2012 ◽  
Vol 256-259 ◽  
pp. 1443-1446
Author(s):  
Xing Lin Wen ◽  
Lin Hai Gao ◽  
Chuan Lei Li ◽  
Meng Meng Dong
Keyword(s):  
Coal Mine ◽  
Surrounding Rock ◽  
Mine Pressure ◽  
Mining Engineering ◽  
Deformation Characteristics ◽  
Working Face ◽  
Production Safety ◽  
Support Force ◽  
Mining Face ◽  
Important Significance

The irregular face mechanized mining is one of the difficult problems in the field of mining engineering. In this thesis, the roadways of 4324 extremely irregular face in DaiZhuang Mine were taken as research object. Through on-site mine pressure observation, the deformation characteristics of the surrounding rock and support force was analyzed. Next the mine pressure appeared rule of the roadways was study. This study benefited that the production of 4324 mining face went on wheels, at the same time, it had important significance to production safety of irregular working face with similar conditions.

scholarly journals Roof Cutting Parameters Design for Gob-Side Entry in Deep Coal Mine: A Case Study

Energies ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 2032 ◽  
Author(s):  
Deyuan Fan ◽  
Xuesheng Liu ◽  
Yunliang Tan ◽  
Shilin Song ◽  
Qingheng Gu ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Coal Mine ◽  
Cutting Parameters ◽  
Surrounding Rock ◽  
Vertical Stress ◽  
Deep Mining ◽  
Cutting Angle ◽  
Working Face ◽  
Mining Conditions ◽  
Cutting Height

Roof cutting is an effective technique for controlling the deformation and failure of the surrounding rock in deep gob-side entry. The determination of the roof cutting parameters has become a popular research subject. Initially, two mechanical models are established for the non-roof-cutting and roof-cutting of gob-side entry in deep mining conditions. On this basis, the necessity and significance of roof cutting is revealed by analysing the stress and displacement of roadside prop. The Universal Distinct Element Code numerical simulation model is established to determine the key roof-cutting parameters (cutting angle and cutting height) according to the on-site situation of No. 2415 headentry of the Suncun coal mine, China. The numerical simulation results show that with the cutting angle and height increase, the vertical stress and horizontal displacement of the coal wall first increase and then decrease, as in the case of the vertical stress and displacement of roadside prop. Therefore, the optimum roof cutting parameters are determined as a cutting angle of 70° and cutting height of 8 m. Finally, a field application was performed at the No. 2415 headentry of the Suncun coal mine. In situ investigations show that after 10 m lagged the working face, the stress and displacement of roadside prop are obviously reduced with the hanging roof smoothly cut down, and they are stable at 19 MPa and 145 mm at 32 m behind the working face, respectively. This indicates that the stability of the surrounding rock was effectively controlled. This research demonstrates that the key parameters determined through a numerical simulation satisfactorily meet the production requirements and provide a reference for ensuring safe production in deep mining conditions.

scholarly journals Failure Analysis of Deep Composite Roof Roadway and Support Optimization of Anchor Cable Parameters

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Chen Li ◽  
Wenlong Zhang ◽  
Tianhong Huo ◽  
Rui Yu ◽  
Xidong Zhao ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Theoretical Analysis ◽  
Underground Mining ◽  
Field Monitoring ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Economic Damage ◽  
Anchor Cable ◽  
Stress Diffusion ◽  
The Stability

The stability of the roadway surrounding rock is the key factor of underground mining. Roof subsidence occurred during roadway excavation in the Menkeqing Coal Mine. For the sake of safety, it was decided to stop tunneling project and strengthen roadway support, which resulted in a delay of the construction period and economic damage. To maintain the stability of the surrounding rock, we carried out a systematic study through field monitoring, theoretical analysis, and numerical simulation. The deformation and failure law of the surrounding rock, roof structure characteristics, and mechanical properties of the surrounding rock were obtained by field monitoring. The failure characteristics and forms of deep composite roof roadway are further analyzed. The key points of stability of the roadway surrounding rock of soft rock composite laminated roof are obtained by theoretical analysis, i.e., improving the effective stress diffusion efficiency of the anchor cable through the reasonable arrangement of the anchor cable. We use FLAC numerical simulation software to study the influence of different supporting parameters of anchor cable on the stress diffusion in the surrounding rock and put forward the optimal parameters. The optimized support parameters have been applied in the field, and the ideal results have been obtained.

Research of Unloading Technology of Defect Method in Dynamic Pressure Roadway

2014 ◽  
Vol 945-949 ◽  
pp. 1175-1179
Author(s):  
Rui Xi Zhang ◽  
Cong Jiang
Keyword(s):  
Numerical Simulation ◽  
Stress Distribution ◽  
Dynamic Pressure ◽  
Simulation Method ◽  
Mining Area ◽  
Surrounding Rock ◽  
Theoretical Solution ◽  
Deep Mine ◽  
Material Inhomogeneity ◽  
Working Face

This paper takes typical stoping of deep-mine dynamic pressure working face of Zhaogezhuang mine of Kailuan mining area for the research background, relieving the dynamic pressure of roadway of burst tendency through building defect method in dynamic pressure roadway. Putting forward the theoretical solution of defect method in dynamic pressure roadway based on elastic-plastic theory;Taking numerical simulation method in view of the material inhomogeneity of actual engineering geological, researching the characteristics of stress distribution of roadway surrounding rock after relieving in defect method; Applying the theory to the stoping of deep-mined impact working face, and the implement effect is good on the spot.

Reasonable Entry Layout of Lower Seam in Multi-Seam Mining Based on Numerical Simulation

2013 ◽  
Vol 295-298 ◽  
pp. 2980-2984
Author(s):  
Xiang Qian Wang ◽  
Da Fa Yin ◽  
Zhao Ning Gao ◽  
Qi Feng Zhao
Keyword(s):  
Numerical Simulation ◽  
Stress Distribution ◽  
Coal Seam ◽  
Coal Mine ◽  
Abutment Pressure ◽  
Surrounding Rock ◽  
Geological Conditions ◽  
Seam Mining

Based on the geological conditions of 6# coal seam and 8# coal seam in Xieqiao Coal Mine, to determine reasonable entry layout of lower seam in multi-seam mining, alternate internal entry layout, alternate exterior entry layout and overlapping entry layout were put forward and simulated by FLAC3D. Then stress distribution and displacement characteristics of surrounding rock were analyzed in the three ways of entry layout, leading to the conclusion that alternate internal entry layout is a better choice for multi-seam mining, for which makes the entry located in stress reduce zone and reduces the influence of abutment pressure of upper coal seam mining to a certain extent,. And the mining practice of Xieqiao Coal Mine tested the results, which will offer a beneficial reference for entry layout with similar geological conditions in multi-seam mining.

scholarly journals Surrounding Rock Movement of Steeply Dipping Coal Seam Using Backfill Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Wenyu Lv ◽  
Kai Guo ◽  
Jianhao Yu ◽  
Xufeng Du ◽  
Kun Feng
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Surrounding Rock ◽  
Maximum Deflection ◽  
Coal Seams ◽  
Physical Similarity ◽  
Working Face ◽  
Rock Structure ◽  
Backfill Mining ◽  
The Stability

The movement of the overlying strata in steeply dipping coal seams is complex, and the deformation of roof rock beam is obvious. In general, the backfill mining method can improve the stability of the surrounding rock effectively. In this study, the 645 working face of the tested mine is used as a prototype to establish the mechanical model of the inclined roof beam using the sloping flexible shield support backfilling method in a steeply dipping coal seam, and the deflection equation is derived to obtain the roof damage structure and the maximum deflection position of the roof beam. Finally, numerical simulation and physical similarity simulation experiments are carried out to study the stability of the surrounding rock structure under backfilling mining in steeply dipping coal seams. The results show the following: (1) With the support of the gangue filling body, the inclined roof beam has smaller roof subsidence, and the maximum deflection position moves to the upper part of working face. (2) With the increase of the stope height, the stress and displacement field of the surrounding rock using the backfilling method show an asymmetrical distribution, the movement, deformation, and failure increase slowly, and the increase of the strain is relatively stable. Compared with the caving method, the range and degree of the surrounding rock disturbed by the mining stress are lower. The results of numerical simulation and physical similarity simulation experiment are generally consistent with the theoretically derived results. Overall, this study can provide theoretical basis for the safe and efficient production of steeply dipping coal seams.

Sign in / Sign up

Export Citation Format

Share Document