scholarly journals Study on the Technology of Enhancing Permeability by Millisecond Blasting in Sanyuan Coal Mine

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Dan Zhao ◽  
Mingyu Wang ◽  
Xinhao Gao
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Simulation Software ◽  
Low Permeability ◽  
Time Interval ◽  
Rock Blasting ◽  
Deep Hole ◽  
Coal Seams ◽  
Coal Rock ◽  
Gas Coal

To reduce gas disasters in low permeability and high-gas coal seams and improve gas predrainage efficiency, conventional deep-hole presplitting blasting permeability increasing technology was refined and perfected. The numerical calculation model of presplitting blasting was established by using ANSYS/LS-DYNA numerical simulation software. The damage degree of coal and rock blasting was quantitatively evaluated by using the value range of the damage variable D. According to the actual field test parameters of coal seam #3 in the Sanyuan coal mine, Dlim = 0.81–1.0 was the coal rock crushing area, Dlim = 0.19–0.81 was the coal rock crack area, and Dlim = 0–0.19 was the coal rock disturbance area. By comparing and analysing the damage distribution nephogram of coal and rock mass under the influence of different millisecond blasting time interval and the blasting effect of simulation model, the optimal layout parameters of multilayer through cracks were obtained theoretically. And, the determined parameters were tested on the working face of the 1312 transportation roadway in coal seam #3 of the Sanyuan coal mine. The permeability effect was compared and analysed through the analysis of the gas concentration, gas purity, and mixing volume before and after the implementation of deep-hole presplitting blasting antireflection technology, as well as the change of gas pressure, attenuation coefficient, permeability coefficient, and other parameters between blasting coal seams. The positive role of millisecond blasting in reducing pressure and increasing permeability in low permeability and high-gas coal seam were determined.

scholarly journals Study on the technology of enhancing permeability by deep hole presplitting blasting in Sanyuan coal mine

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Dan Zhao ◽  
Mingyu Wang ◽  
Xinhao Gao
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Rock Blasting ◽  
Deep Hole ◽  
Positive Effects ◽  
Single Hole ◽  
Permeability Enhancement ◽  
Damage Degree ◽  
Coal Rock ◽  
Gas Coal

AbstractTo reduce gas disasters in low permeability and high gas coal seams and improve gas predrainage efficiency, conventional deep hole presplitting blasting permeability increasing technology was refined and perfected. The damage degree of coal and rock blasting was quantitatively evaluated by using the value range of the damage variable D. According to the actual field test parameters of coal seam #3 in the Sanyuan coal mine, Dlim = 0.81 ~ 1.0 was the coal rock crushing area, Dlim = 0.19 ~ 0.81 was the coal rock crack area, and Dlim = 0 ~ 0.19 was the coal rock disturbance area. The blasting models under different blasting parameters were established by ANSYS/LS-DYNA software. The influence radius of single-hole blasting was 3.1 m, the hole diameter of double-hole blasting was 113 mm, the hole spacing was 5.5 m, and the delayed blasting time was 25 ms. According to the numerical simulation results, the determined parameters were tested on the working face of the 1312 transportation roadway in coal seam #3 of the Sanyuan coal mine. The results show that after blasting, the permeability of the original coal seam was increased by more than 30 times, the gas concentration was increased by 2.16 times, and the single hole purity and mixing volume were increased by 4.73 and 4.27 times, respectively. The positive effects of deep hole presplitting blasting permeability enhancement technology on the pressure relief and permeability enhancement of a low pressure and high gas coal seam were determined.

scholarly journals A Study of the Laws of Abnormal Gas Emissions and the Stability Controls for Coal Mine Walls in Deeply Buried High-Gas Coal Seams

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Anying Yuan ◽  
Hao Hu ◽  
Qiupeng Yuan
Keyword(s):  
Coal Seam ◽  
Water Content ◽  
Coal Mine ◽  
Gas Diffusion ◽  
Hard Coal ◽  
Coal Seams ◽  
Gas Emissions ◽  
Soft Coal ◽  
Pressure Water ◽  
Gas Coal

At the present time, it is considered to be of major significance to study the gas emission law and stability controls of coal bodies in deeply buried high-gas coal seams. For this reason, in view of the specific problems of gas emissions caused by unstable rib spalling in coal mine walls, comprehensive research methods were adopted in this study, in order to conduct an in-depth examination of micropore structure parameters, gas desorption, diffusion laws, and coal stability levels. The results showed that the development degree of the pores above the micropores, as well as the small pores in soft coal seams, was better than those observed in hard coal seams. In addition, the gas outburst phenomenon was found to have more easily formed in the soft coal seams. The coal body of the No. 6 coal seam in the Xieqiao Coal Mine not only provided the conditions for gas adsorption but also provided dominant channels for gas diffusion and migration. The abnormal gas emissions of the No. 6 coal seam were jointly caused by the relatively developed pores above the small holes in the coal body, rib spalling of coal mine walls, and so on. The research results also revealed the evolution law of mechanical characteristics of the No. 6 coal seam under different water content conditions. It was found that the strength levels of the No. 6 coal seam first increased and then decreased with the increase in water content, and the water content level at the maximum strength of the coal seam was determined to be 7.09%. This study put forward a method which combined the water injection technology of long-term static pressure water injections in deep coal mining holes and real-time dynamic pressure water injections in shallower holes. Field experiments were successfully carried out.

scholarly journals Permeability enhancement of deep hole pre-splitting blasting in the low permeability coal seam of the Nanting coal mine

PLoS ONE ◽  
2018 ◽  
Vol 13 (6) ◽  
pp. e0199835 ◽  
Author(s):  
Zhengyi Ti ◽  
Feng Zhang ◽  
Jin Pan ◽  
Xiaofei Ma ◽  
Zheng Shang
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Low Permeability ◽  
Deep Hole ◽  
Permeability Enhancement

The Study on Roadway Layout in Coordination of Mining Coal Seams Base on Failure of Floor Strata

2014 ◽  
Vol 889-890 ◽  
pp. 1362-1374 ◽  
Author(s):  
Yong Zhang ◽  
Chun Lei Zhang ◽  
Chun Chen Wei ◽  
Ya Dong Liu ◽  
Shi Qing Zhang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Theoretical Analysis ◽  
Coal Seam ◽  
Coal Mining ◽  
Coal Mine ◽  
Simulation Software ◽  
Coal Seams ◽  
Group Coordination ◽  
Mining Coal ◽  
Two Sides

In order to make sure the reasonable roadway layout in lower seam of close coal mining group coordination in Lijiahao coal mine, firstly, applying the theoretical analysis and geological radar detection to get the influence depth of mining from the up coal seam 2-2 to the floor is about 20m, the results show that the thickness of complete strata is about 15m, then determining to use the outward alternate entries in lower seam roadway by using theoretical analysis. At last, determining the distance of outward alternate entries is 12-14m by using FLAC3D numerical simulation software to simulate the change of stress and displacement in roof floor and two sides of roadway.

scholarly journals Geological evolution process, mechanism, and application of protective layer in semi-coal and rock face

2021 ◽  
Vol 24 (4) ◽  
pp. 499-506
Author(s):  
Xiaoping Xie ◽  
Xinqiu Fang ◽  
Minfu Liang ◽  
Dechun Ai
Keyword(s):  
Coal Seam ◽  
Protective Layer ◽  
Practical Significance ◽  
Low Permeability ◽  
Coal Seams ◽  
Pressure Relief ◽  
Rock Face ◽  
Geological Evolution ◽  
Pillar Mining ◽  
Gas Coal

Under the influence of geological structure, the surrounding rock of semi-coal seam is easy to be loose and fractured, and the repairing rate is high. Therefore, it is of great theoretical and practical significance to study semi-coal seam mining's mechanism and control technology. In this paper, the geological evolution principle of the semi-coal seam is analyzed theoretically. The mechanic's relationship between the mining height of the semi-coal face and the lower coal seam's pressure relief is interpreted. The mechanism of eliminating bad blind areas in non-pillar mining of upper protective seam is analyzed. Through numerical simulation analysis, it is concluded that the expansion deformation rate of a protective layer increases linearly with the increase of mining thickness of the protective layer, and the width of undesirable blind zone of coal seam increases linearly with the rise of protective layer thickness. This paper puts forward the technology of non-pillar mining in the protective seam's semi-coal and rock face. Field industrial test results show that the technology achieves the overall pressure relief and reflection reduction of low permeability and high gas coal seams. The underlying 3 + 4 protective layer achieves the general pressure relief and reflection reduction of low permeability and high gas coal seams. Coalbed methane can be pre-drained up to 18 m3/min with a concentration of 90%.

scholarly journals Coupling Technology of Deep-Hole Presplitting Blasting and Hydraulic Fracturing Enhance Permeability Technology in Low-Permeability and Gas Outburst Coal Seam: A Case Study in the No. 8 Mine of Pingdingshan, China

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Wei Wang ◽  
Yanzhao Wei ◽  
Minggong Guo ◽  
Yanzhi Li
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Complex Structure ◽  
Coal And Gas Outburst ◽  
Gas Content ◽  
Low Permeability ◽  
Gas Extraction ◽  
Deep Hole ◽  
Coal Seams ◽  
Gas Outburst

The current study aims to analyze the principles of integrated technology of explosion to tackle the problems of coal seam high gas content and pressure, developed faults, complex structure, low coal seam permeability, and high outburst risk. Based on this, we found through numerical simulation that as the inclination of the coal seam increases, the risk of coal and gas outburst increases during the tunneling process. Therefore, it is necessary to take measures to reduce the risk of coal and gas outburst. We conducted field engineering experiments. Our results show that the synergistic antireflection technology of hydraulic fracturing and deep-hole presplitting blasting has a significant antireflection effect in low-permeability coal seams. After implementing this technology, the distribution of coal moisture content was relatively uniform and improved the influence range of direction and tendency. Following 52 days of extraction, the average extraction concentration was 2.9 times that of the coal seam gas extraction concentration under the original technology. The average scalar volume of single hole gas extraction was increased by 7.7 times. Through field tests, the purpose of pressure relief and permeability enhancement in low-permeability coal seams was achieved. Moreover, the effect of gas drainage and treatment in low-permeability coal seams was improved, and the applicability, effectiveness, and safety of underground hydraulic fracturing and antireflection technology in low-permeability coal seams were verified. The new technique is promising for preventing and controlling gas hazards in the future.

scholarly journals Cooperative Control Mechanism of Long Flexible Bolts and Blasting Pressure Relief in Hard Roof Roadways of Extra-Thick Coal Seams: A Case Study

2021 ◽  
Vol 11 (9) ◽  
pp. 4125
Author(s):  
Zhe Xiang ◽  
Nong Zhang ◽  
Zhengzheng Xie ◽  
Feng Guo ◽  
Chenghao Zhang
Keyword(s):  
Coal Seam ◽  
Cooperative Control ◽  
Field Tests ◽  
Surrounding Rock ◽  
Deep Hole ◽  
Coal Seams ◽  
Thick Coal Seam ◽  
Structure Damage ◽  
Hard Roof

The higher strength of a hard roof leads to higher coal pressure during coal mining, especially under extra-thick coal seam conditions. This study addresses the hard roof control problem for extra-thick coal seams using the air return roadway 4106 (AR 4106) of the Wenjiapo Coal Mine as a case study. A new surrounding rock control strategy is proposed, which mainly includes 44 m deep-hole pre-splitting blasting for stress releasing and flexible 4-m-long bolt for roof supporting. Based on the new support scheme, field tests were performed. The results show that roadway support failure in traditional scenarios is caused by insufficient bolt length and extensive rotary subsidence of the long cantilever beam of the hard roof. In the new proposed scheme, flexible 4-m-long bolts are shown to effectively restrain the initial expansion deformation of the top coal. The deflection of the rock beam anchored by the roof foundation are improved. Deep-hole pre-splitting blasting effectively reduces the cantilever distance of the “block B” of the voussoir beam structure. The stress environment of the roadway surrounding rock is optimized and anchorage structure damage is inhibited. The results provide insights regarding the safe control of roadway roofs under extra-thick coal seam conditions.

scholarly journals Micropore Structure and Fractal Characteristics of Low-Permeability Coal Seams

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Guang-zhe Deng ◽  
Rui Zheng
Keyword(s):  
Fractal Dimension ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Coal Seam ◽  
Linear Relationship ◽  
Surface Area ◽  
Pore Volume ◽  
Low Permeability ◽  
Coal Seams ◽  
Scanning Electron

With the raw coal from a typical low-permeability coal seam in the coalfield of South Junger Basin in Xinjiang as the research object, this paper examined six kinds of coal samples with different permeabilities using a scanning electron microscope and a low-temperature nitrogen adsorption test that employed a JSM-6460LV high-resolution scanning electron microscope and an ASAP2020 automatic specific surface area micropore analyzer to measure all characteristic micropore structural parameters. According to fractal geometry theory, four fractal dimension calculation models of coal and rock were established, after which the pore structure characteristic parameters were used to calculate the fractal dimensions of the different coal seams. The results show that (1) the low-permeability coal seam in the coalfield of South Junger Basin in Xinjiang belongs to mesoporous medium, with a certain number of large pores and no micropores. The varying adsorption capacities of the different coal seams were positively correlated with pore volume, surface area, and the mesoporous surface area proportions, from which it was concluded that mesopores were the main contributors to pore adsorption in low-permeability coal seams. (2) The raw coal pore fractal dimension had a negative linear relationship to average pore size, a positive linear relationship with total pore volume, total surface area, and adsorption capacity, and a positive correlation with the mesoporous surface area proportion; that is, the higher the fractal dimension, the larger the pore volume and surface area of the raw coal. (3) The permeability of the low-permeability coal seam had a phase correlation with the micropore development degree; that is, the permeability had a phase negative correlation with the pore distribution fractal dimension, and there was a positive correlation between permeability and porosity. These results are of theoretical significance for the clean exploitation of low-permeability coal seam resources.

Study on Methods of Exploring the Loosening Radius of Deep-Hole Controlling Blasting

2013 ◽  
Vol 734-737 ◽  
pp. 650-655
Author(s):  
Wen Qing Zhang ◽  
Jian Liu
Keyword(s):  
Theoretical Analysis ◽  
Coal Seam ◽  
Gas Flow ◽  
Critical Factor ◽  
Field Investigation ◽  
Flow Index ◽  
Low Permeability ◽  
Deep Hole ◽  
Deep Borehole ◽  
Outburst Coal Seam

Deep borehole controlling blasting is one of the most popular methods which used to improve permeability of low permeability and highly gassy coal seam. Proper interval between blasting hole is the critical factor. On this paper, the theory and insufficiency of each method are discussed by theoretical analysis and field investigation. The result shows that, because of the complexity of outburst coal seam, the measuring result got by different methods is relative and declinational. We need to make a right choice according to the actual demand. And the method of gas flow index is quickly, visual and reliable, which to be worth paying the utmost attention to.

Sign in / Sign up

Export Citation Format

Share Document