scholarly journals Study on the Creep Damage Characteristics of Shale under the Combined Action of Osmotic Pressure and Disturbance Load

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Junguang Wang ◽  
Qingrong Yu ◽  
Bing Liang ◽  
Zhangqing Xuan
Keyword(s):  
Creep Test ◽  
Water Pressure ◽  
Creep Damage ◽  
Surrounding Rock ◽  
Seepage Water ◽  
Mining Engineering ◽  
Creep Failure ◽  
Disturbance Frequency ◽  
Combined Action

In the in situ modified fluidized mining engineering, the surrounding rock of the shaft wall is prone to creep instability damage under the action of disturbance and seepage water pressure, which seriously affects the stability of the surrounding rock of the deep in situ modified fluidized mining. In order to study the nonlinear creep damage and fracture characteristics of deep rocks under the combined action of seepage water pressure and disturbance load, a self-developed rock perturbation creep test rig under the action of seepage water pressure was used, and shale was used as the rock sample. In the method of staged loading, the rock uniaxial compression perturbation creep test under static axial pressure, different perturbation frequencies, and different seepage water pressures was carried out, and the creep characteristics of shale under the combined action of perturbation and seepage were studied. The results show that with the increase of seepage water pressure, the creep failure time of the rock decreases, and the ultimate strain value increases; with the increase of the disturbance frequency, the creep failure mode of the rock gradually transitions from shear failure to tension failure. When water pressure and disturbance load exist at the same time, rock creep is more sensitive to seepage water pressure; based on experimental results, a shale perturbation creep damage model considering the influence of seepage water pressure and disturbance frequency is established, and the model is verified. The research results have important theoretical significance for guiding the wellbore stability control of in situ modified fluidized mining engineering.

scholarly journals Theoretical Analysis of Three-Dimensional Seepage through the Fracture with Surrounding Rock Deformation

2020 ◽  
Author(s):  
Haichun Ma ◽  
Jingping Wang ◽  
Jiazhong Qian ◽  
Xiaohui Tan ◽  
Lei Ma ◽  
...  
Keyword(s):  
Dimensional Space ◽  
Water Pressure ◽  
Rock Fracture ◽  
Three Dimensional ◽  
Mass Conservation ◽  
Fracture Morphology ◽  
Conservation Equation ◽  
Surrounding Rock ◽  
Rock Deformation ◽  
Seepage Water

The formation of rock fractures in nature has a certain relationship with water seepage. In order to analyze the shape of rock fracture, we propose a rock deformation theoretical model in three-dimensional space considering with the condition of seepage water pressure, and establish the mass conservation equation, seepage equation, surrounding rock displacement equation, so as to deduce the rock deformation control equation under seepage pressure action. The numerical analysis of the nonlinear quadratic partial differential equation obtains the fracture deformation distribution in the example, and verifies with the calculated fracture morphology. And we further use this principle to analyze the fracture morphology in nature and prove the rationality of the theory.

ASME 1995 Nadai Lecture—Plasticity of Porous and Particulate Materials

1996 ◽  
Vol 118 (2) ◽  
pp. 145-156 ◽  
Author(s):  
N. D. Cristescu
Keyword(s):  
Experimental Data ◽  
Constitutive Equation ◽  
Model Prediction ◽  
Creep Damage ◽  
Mining Engineering ◽  
Creep Failure ◽  
Time Effects ◽  
Engineering Problems ◽  
Stationary Creep ◽  
Good Agreement

The paper discusses the formulation of constitutive equation for those materials for which the irreversible changes of the volume is also to be taken into account. These are mainly geomaterials, cement, powders of various kinds, ceramics, etc. Experimental evidence is first presented showing that the time effects on irreversible volumetric changes and failure are very important. The concept of compressibility/dilatancy boundary is further introduced. The general constitutive equation able to describe instantaneous response, transient and stationary creep, dilatancy and/or compressibility during creep, failure, creep damage and creep failure, is presented. Examples formulated for various materials are given. Comparison between model prediction and experimental data shows a very good agreement. A few examples of applications of the model to mining engineering problems are mentioned.

scholarly journals The Monitoring-Based Analysis on Deformation-Controlling Factors and Slope Stability of Reservoir Landslide: Hongyanzi Landslide in the Southwest of China

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Bing Han ◽  
Bin Tong ◽  
Jinkai Yan ◽  
Chunrong Yin ◽  
Liang Chen ◽  
...  
Keyword(s):  
Water Level ◽  
Water Pressure ◽  
Monitoring Program ◽  
Significant Risk ◽  
Controlling Factors ◽  
Seepage Water ◽  
Reservoir Water ◽  
Reservoir Water Level ◽  
Reservoir Area ◽  
Reservoir Landslide

Reservoir landslide is a type of commonly seen geological hazards in reservoir area and could potentially cause significant risk to the routine operation of reservoir and hydropower station. It has been accepted that reservoir landslides are mainly induced by periodic variations of reservoir water level during the impoundment and drawdown process. In this study, to better understand the deformation characters and controlling factors of the reservoir landslide, a multiparameter-based monitoring program was conducted on a reservoir landslide—the Hongyanzi landslide located in Pubugou reservoir area in the southwest of China. The results indicated that significant deformation occurred to the landslide during the drawdown period; otherwise, the landslide remained stable. The major reason of reservoir landslide deformation is the generation of seepage water pressure caused by the rapidly growing water level difference inside and outside of the slope. The influences of precipitation and earthquake on the slope deformation of the Hongyanzi landslide were insignificant.

scholarly journals Cutting Resistance Laboratory Testing Methodology for Underwater Coal Mining

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 564
Author(s):  
Vladimir Čebašek ◽  
Veljko Rupar ◽  
Stevan Đenadić ◽  
Filip Miletić
Keyword(s):  
Coal Mining ◽  
Laboratory Testing ◽  
Water Pressure ◽  
Laboratory Data ◽  
Working Environment ◽  
Laboratory Research ◽  
Surrounding Water ◽  
Cutting Resistance ◽  
Testing Methodology

The bucket-wheel dredge “Kovin I” for underwater coal mining with bucket-wheel type UCW-450 has been in operation for over 20 years. Based on analyzing the bucket-wheel dredger performance, productivity, maintenance costs, and reliability, a rational decision was made: to rehabilitate the most essential parts of the dredge, including the bucket wheel and the gearbox. However, the selection and construction of the excavator parts were performed on the ground of available laboratory data for digging resistance. The data itself was determined by the testing methodology that did not include the influence of surrounding water pressure at a certain depth of mining. According to the previous findings, it was necessary to develop a specific research and testing program that would involve appropriate laboratory testing of the geomechanical parameters. These were to represent the influence of hydrostatic water pressure on the working environment—coal. Nevertheless, geomechanical laboratory research tests were initially modified to provide reliable data of cutting resistance, especially in the water under different hydrostatic pressures, fully simulating the “in situ” working conditions of mining, i.e., cutting.

scholarly journals Analysis of Tunnel Water Inrush Considering the Influence of Surrounding Rock Permeability Coefficient by Excavation Disturbance and Ground Stress

2021 ◽  
Vol 11 (8) ◽  
pp. 3645
Author(s):  
Helin Fu ◽  
Pengtao An ◽  
Long Chen ◽  
Guowen Cheng ◽  
Jie Li ◽  
...  
Keyword(s):  
Permeability Coefficient ◽  
Water Pressure ◽  
Water Inrush ◽  
Surrounding Rock ◽  
Water Inflow ◽  
Calculation Error ◽  
External Water Pressure ◽  
Ground Stress ◽  
External Water ◽  
Inflow Prediction

Affected by the coupling of excavation disturbance and ground stress, the heterogeneity of surrounding rock is very common. Presently, treating the permeability coefficient as a fixed value will reduce the prediction accuracy of the water inflow and the external water pressure of the structure, leading to distortion of the prediction results. Aiming at this problem, this paper calculates and analyzes tunnel water inflow when considering the heterogeneity of permeability coefficient of surrounding rock using a theoretical analysis method, and compares with field data, and verifies the rationality of the formula. The research shows that, when the influence of excavation disturbance and ground stress on the permeability coefficient of surrounding rock is ignored, the calculated value of the external water force of the tunnel structure is too small, and the durability and stability of the tunnel are reduced, which is detrimental to the safety of the structure. Considering the heterogeneity of surrounding rock, the calculation error of water inflow can be reduced from 27.3% to 13.2%, which improves the accuracy of water inflow prediction to a certain extent.

An improved nonlinear damage model of rocks considering initial damage and damage evolution

2020 ◽  
Vol 29 (7) ◽  
pp. 1117-1137 ◽  
Author(s):  
Wenlin Feng ◽  
Chunsheng Qiao ◽  
Shuangjian Niu ◽  
Zhao Yang ◽  
Tan Wang
Keyword(s):  
Damage Evolution ◽  
Least Squares Method ◽  
Damage Model ◽  
Creep Damage ◽  
Secondary Creep ◽  
Nonlinear Creep ◽  
Creep Failure ◽  
Initial Damage ◽  
Nonlinear Damage Model ◽  
Creep Damage Model

The experimental results show that the creep properties of the rocks are affected by the initial damage, and the damage evolution also has a significant impact on the time-dependent properties of the rocks during the creep. However, the effects of the initial damage and the damage evolution are seldom considered in the current study of the rocks' creep models. In this paper, a new nonlinear creep damage model is proposed based on the multistage creep test results of the sandstones with different damage degrees. The new nonlinear creep damage model is improved based on the Nishihara model. The influences of the initial damage and the damage evolution on the components in the Nishihara model are considered. The creep damage model can not only describe the changes in three creep stages, namely, the primary creep, the secondary creep, and the tertiary creep, but also reflect the influence of the initial damage and the damage evolution on creep failure. The nonlinear least squares method is used to determine the parameters in the nonlinear creep damage model. The consistency between the experimental data and the predicted results indicates the applicability of the nonlinear damage model to accurately predict the creep deformation of the rocks with initial damage.

The Test Study to the Changes of Excess Pore Water Pressure during Precast Pile Construction

2012 ◽  
Vol 193-194 ◽  
pp. 1010-1013
Author(s):  
Shu Qing Zhao
Keyword(s):  
Pore Water ◽  
Clayey Soil ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Excess Pore Pressure ◽  
Soil Pressure ◽  
Excess Pore Water Pressure ◽  
Test Study ◽  
Excess Pore

The construct to precast pile in thick clayey soil can cause the accumulation of excess pore water pressure. The high excess pore pressure can make soil, buildings and pipes surrounded have large deflection, even make them injured. Combining with actual projects, this paper presents an in-situ model test on the changes of excess pore water pressure caused by precast pile construct. It is found that the radius of influence range for single pile driven is about 15m，the excess pore water pressure can reach or even exceed the above effective soil pressure, and there are two relatively stable stages.

Developing an in situ, hydromechanical coupling, true triaxial rock compression tester and investigating the deformation patterns of reservoir bank slopes

2021 ◽  
pp. qjegh2021-043
Author(s):  
Lei Fan ◽  
Meiwan Yu ◽  
Aiqing Wu ◽  
Yihu Zhang
Keyword(s):  
Coupling Effect ◽  
Water Pressure ◽  
Pressure Coefficient ◽  
Hydromechanical Coupling ◽  
Rock Interaction ◽  
True Triaxial ◽  
Rock Structure ◽  
Deformation Patterns

Interactions between water and rocks are the main factors affecting the deformation of rock masses on sloped banks by reservoir impoundment. The technology used in laboratory tests of water-rock interaction mechanisms cannot simulate the coupling of water, the rock structure and the initial stress environment. In this work, we develop an in situ hydromechanical true triaxial rock compression tester and apply it to investigate the coupling response of reservoir bank rocks to changing groundwater levels. The tester is composed of a sealed chamber, loader, reactor, and device for measuring deformation, which are all capable of withstanding high water pressures, and a high-precision servo controller. The maximum axial load, lateral load and water pressure are 12 000 kN, 3 000 kN and 3 MPa, respectively. The dimensions of the test specimens are 310 mm×310 mm×620 mm. The test specimens are grey-black basalts with well-developed cracks from the Xiluodu reservoir area. The results show that increasing water pressure promotes axial compression and lateral expansion, while decreasing water pressure causes axial expansion and lateral compression. A water pressure coefficient, K, is introduced as a measure of the hydromechanical coupling effect (expansion or compression) with changing groundwater level. A mechanical tester can be used to perform accurate field tests of the response of wet rocks to hydromechanical coupling. The test results provide new information about the deformation patterns of rock slopes in areas surrounding high dams and reservoirs.Thematic collection: This article is part of the Role of water in destabilizing slopes collection available at: https://www.lyellcollection.org/cc/Role-of-water-in-destabilizing-slopes

Judgement Method for Surrounding Rock Stability of Guanjiao Tunnel Based on Catastrophe Theory

2011 ◽  
Vol 90-93 ◽  
pp. 2307-2312 ◽  
Author(s):  
Wen Jiang Li ◽  
Su Min Zhang ◽  
Xian Min Han
Keyword(s):  
Plastic Strain ◽  
Catastrophe Theory ◽  
Soft Rock ◽  
Surrounding Rock ◽  
In Situ Monitoring ◽  
Engineering Practice ◽  
Stability Of Surrounding Rock ◽  
The Stability ◽  
Rock Tunnel

The stability judgement of surrounding rock is one of the key jobs in tunnel engineering. Taking the Erlongdong fault bundle section of Guanjiao Tunnel as the background, the stability of surrounding rock during construction of soft rock tunnel was discussed preliminarily. Based on plastic strain catastrophe theory, and combining numerical results and in-situ data, the limit displacements for stability of surrounding rock were analyzed and obtained corresponding to the in-situ monitoring technology. It shows that the limit displacements obtained corresponds to engineering practice primarily. The plastic strain catastrophe theory under unloading condition provides new thought for ground stability of deep soft rock tunnel and can be good guidance and valuable reference to construction decision making and deformation managing of similar tunnels.

Sign in / Sign up

Export Citation Format

Share Document