FORM, FUNCTION AND TECHNOLOGY IN POTTERY PRODUCTION FROM LATE ANTIQUITY TO THE EARLY MIDDLE AGES

2008 ◽  
Vol 4 (1) ◽  
pp. 159-186 ◽  
Author(s):  
Paul Arthur
Keyword(s):  
Middle Ages ◽  
Late Antiquity ◽  
Large Scale ◽  
Ceramic Technology ◽  
Scale Production ◽  
Local Production ◽  
Pottery Production ◽  
The North ◽  
Form Function ◽  
Large Scale Production

This article discusses the development of ceramic technology from the 4th to the 8th c. A.D., in both the East and West Mediterranean areas. It outlines the competence of Late Roman ceramics, dominated by African producers, with some evidence of innovation in decoration in the West. Change occurs from the 5th c. onwards, in different regions at different times, connected to the dislocation of markets and the end of large scale production. Large areas of the North return to the local production of hand-made pottery, whilst in the Mediterranean wheel-thrown pottery also becomes cruder. Continuity is greatest in the Levantine regions under Islam, though not in Africa. However, innovations are still known, including clibani and the use of glazes.

Strength and Impotence. The Developing Countries and the Development in New Territories

1974 ◽  
Vol 9 (2-3) ◽  
pp. 167-177
Author(s):  
Willy Østreng
Keyword(s):  
Large Scale ◽  
Raw Materials ◽  
Developed Countries ◽  
Economic Effects ◽  
Scale Production ◽  
Underdeveloped Countries ◽  
The North ◽  
Large Scale Production ◽  
The Developed Countries ◽  
The Third World

This article examines the possible political and economic effects of large-scale mineral extraction from the seabed. The findings presented indicate that development in new territories may conceivably serve to exacerbate existing conflict dimensions, notably the North/South dimension in global politics. Because of the developed countries' monopoly on know-how and economic capability, exploration and exploitation of the inorganic resources of the ocean floor has de facto been the exclusive domain of these countries. On the basis of this the author shows that if large-scale production of seabed resources should become a reality in the near future, the underdeveloped countries will be forced to watch it from the sidelines. As a consequence, the exploitation of offshore raw materials will probably contribute to the further widening of the gap between developed and underdeveloped countries. Further commenting on the fact that the latter today are the main producers of the most promising seabed resources, the author expresses the view that exploitation will have a detrimental effect on the economics of the Third World countries, since it might lead to overproduction and price reductions.

The Origin of Puuc Slate Ware: New Data from Sayil, Yucatan, Mexico

1995 ◽  
Vol 6 ◽  
pp. 119-134 ◽  
Author(s):  
Michael P. Smyth ◽  
Christopher D. Dore ◽  
Hector Neff ◽  
Michael D. Glascock
Keyword(s):  
Large Scale ◽  
Raw Materials ◽  
Compositional Analysis ◽  
Classic Period ◽  
Scale Production ◽  
Local Production ◽  
Comprehensive Investigation ◽  
Terminal Classic ◽  
Large Scale Production ◽  
Major Producer

AbstractThis paper reports results of the first neutron-activation analysis (NAA) of ancient pottery wares and clays from the Puuc region of Yucatan. Based on ceramics from Sayil, this investigation seeks to expand exploration into the nature of commercialization during the Terminal Classic period (A.D. 800–1000). This research sought to: (a) establish the chemical composition of major Puuc wares, (b) begin to define potential raw materials and production loci at Sayil, and (c) explore the question of whether Sayil was a major producer and exporter of ceramic wares. Compositional analysis reveals that three of the four major Puuc wares (Puuc Slate, Puuc Unslipped, and Puuc Red) exhibit some degree of chemical distinctiveness, suggesting discrete production units. Compositional analysis of clays from Sayil and Loltun Cave indicates that Puuc Slate and Puuc Red Ware are compatible with clays locally available at Sayil, supporting local production of these wares, whereas Puuc Unslipped Ware initially appears to be closer compositionally to clays from Loltun. In addition, Puuc Slate is an important ware found throughout northern Yucatan that shows evidence of large-scale production at Sayil. This analysis represents the first steps of a comprehensive investigation into the Maya economy of Terminal Classic Yucatan.

The Cotton Industry of Northern Italy in the Late Middle Ages: 1150–1450

1972 ◽  
Vol 32 (1) ◽  
pp. 262-286 ◽  
Author(s):  
Maureen Fennell Mazzaoui
Keyword(s):  
Middle Ages ◽  
Textile Industry ◽  
Large Scale ◽  
Northern Italy ◽  
Cotton Cloth ◽  
Scale Production ◽  
Late Middle Ages ◽  
Large Scale Production ◽  
Single Production ◽  
High Degree

In studies of the late medieval economy, the dominant position of the textile industry has long been recognized. Since the opening decades of this century however, scholarly attention has been directed almost exclusively toward the luxury industries of silk and fine woolens, which involved a complex financial and commercial structure geared to the satisfaction of the needs and desires of a wealthy and select clientele. Relatively neglected is that branch of the textile industry devoted to the production of low-priced cotton cloth for popular consumption. This neglect is all the more surprising in view of a rich if somewhat dispersed documentation attesting to the importance of this industry in numerous towns of Northern Italy. The large-scale production of cotton cloth posed problems of financing and organization not unlike those of silk and wool and gave rise to similar entrepreneurial forms. At the same time a study of the organization of cotton manufacture provides a number of unique insights into aspects of economic organization in Northern Italy. In the period covered by this paper, the cotton manufacturing centers of this area formed a single production zone characterized by a high degree of economic interdependence and a marked tendency toward the standardization of products.

scholarly journals Technology and organization of black pottery production on the north coast of Peru

2019 ◽  
pp. 133-156
Author(s):  
Izumi Shimada ◽  
Ursel Wagner
Keyword(s):  
Large Scale ◽  
Good Deal ◽  
The Body ◽  
North Coast ◽  
Scale Production ◽  
Pottery Production ◽  
The North ◽  
Reducing Conditions ◽  
Experimental Firing ◽  
North Coast Of Peru

Not all «black» pottery was produced in the same manner just as their social and symbolic uses and reasons for production varied a good deal. Nor are many examples truly black. The Middle Sicán culture (AD 900-1100) on the north coast of Peru distinguished itself with the perfection and large-scale production of black pottery made of fine paste. Based on our «holistic» study of a Middle Sicán workshop (including experimental firing and detailed chemical analyses of both archaeological and experimental samples), we present a detailed characterization of the blackware production technology and organization. Our study revealed that the glossy Middle Sicán blackware resulted from various factors including firing under strongly reducing conditions in small semi-closed kilns, an even carbon deposition on the vessel surface as well as penetration into the body, and the formation of graphite crystals on the well-burnished surface. Chimú reduced ware, in contrast, is typically made of coarser pastes, not as well burnished, and fired in relatively large “pit kilns” that did not permit a tight control over temperature and atmosphere. We infer that the prestige of the Middle Sicán religion and its art together with the lustrous, truly black appearance of the pottery that had been rarely achieved before played an important role in establishing the popularity of black pottery not only in the Sicán heartland but also much of the coastal Peru.

I. S. A. Baud. Forms of Production and Women's Labour: Gender Aspects of Industrialisation in India and Mexico. New Delhi: Sage Publications. 1992. 321 pp.Hardbound. Price: Indian Rs 295.00.

1993 ◽  
Vol 32 (1) ◽  
pp. 129-131
Author(s):  
Naureen Talha
Keyword(s):  
Large Scale ◽  
Indian Society ◽  
New Delhi ◽  
Scale Production ◽  
Female Labour ◽  
Self Employment ◽  
Commodity Production ◽  
Large Scale Production ◽  
Mexican Society ◽  
Small Production

The literature on female labour in Third World countries has become quite extensive. India, being comparatively more advanced industrially, and in view of its size and population, presents a pictures of multiplicity of problems which face the female labour market. However, the author has also included Mexico in this analytical study. It is interesting to see the characteristics of developing industrialisation in two different societies: the Indian society, which is conservative, and the Mexican society, which is progressive. In the first chapter of the book, the author explains that he is not concerned with the process of industrialisation and female labour employed at different levels of work, but that he is interested in forms of production and women's employment in large-scale production, petty commodity production, marginal small production, and self-employment in the informal sector. It is only by analysis of these forms that the picture of females having a lower status is understood in its social and political setting.

An Efficient and Improved Process for the Synthesis of Itopride Hydrochloride and Trimethobenzamide Hydrochloride

2018 ◽  
Vol 15 (4) ◽  
pp. 572-575 ◽  
Author(s):  
Ponnusamy Kannan ◽  
Samuel I.D. Presley ◽  
Pallikondaperumal Shanmugasundaram ◽  
Nagapillai Prakash ◽  
Deivanayagam Easwaramoorthy
Keyword(s):  
Large Scale ◽  
Hydroxylamine Hydrochloride ◽  
Scale Production ◽  
One Pot ◽  
Hydrochloride Salt ◽  
Environmental Friendly ◽  
Large Scale Production ◽  
Non Ulcer Dyspepsia ◽  
Itopride Hydrochloride ◽  
Yield And Purity

Aim and Objective: Itopride is a prokinetic agent used for treating conditions like non-ulcer dyspepsia. Itopride is administered as its hydrochloride salt. Trimethobenzamide is used for treating nausea and vomiting and administered as its hydrochloride salt. The aim is to develop a novel and environmental friendly method for large-scale production of itopride and trimethobenzamide. Materials and Methods: Itopride and trimethobenzamide can be prepared from a common intermediate 4- (dimethylaminoethoxy) benzyl amine. The intermediate is prepared from one pot synthesis using Phyrdroxybenzaldehye and zinc dust and further reaction of the intermediate with substituted methoxy benzoic acid along with boric acid and PEG gives itopride and trimethobenzamide. Results: The intermediate 4-(dimethylaminoethoxy) benzylamine is prepared by treating p-hydroxybenzaldehyde and 2-dimethylaminoethyl chloride. The aldehyde formed is treated with hydroxylamine hydrochloride. The intermediate is confirmed by NMR and the purity is analysed by HPLC. Conclusion: Both itopride and trimethobenzamide were successfully synthesized by this method. The developed method is environmental friendly, economical for large-scale production with good yield and purity.

scholarly journals Cyanobacteria—From the Oceans to the Potential Biotechnological and Biomedical Applications

Marine Drugs ◽  
2021 ◽  
Vol 19 (5) ◽  
pp. 241
Author(s):  
Shaden A. M. Khalifa ◽  
Eslam S. Shedid ◽  
Essa M. Saied ◽  
Amir Reza Jassbi ◽  
Fatemeh H. Jamebozorgi ◽  
...  
Keyword(s):  
Bioactive Compounds ◽  
Biomedical Applications ◽  
Large Scale ◽  
Biological Activities ◽  
Scale Production ◽  
Pharmacological Activities ◽  
Large Scale Production ◽  
Marine Products ◽  
Hiv 1 ◽  
Successful Phase

Cyanobacteria are photosynthetic prokaryotic organisms which represent a significant source of novel, bioactive, secondary metabolites, and they are also considered an abundant source of bioactive compounds/drugs, such as dolastatin, cryptophycin 1, curacin toyocamycin, phytoalexin, cyanovirin-N and phycocyanin. Some of these compounds have displayed promising results in successful Phase I, II, III and IV clinical trials. Additionally, the cyanobacterial compounds applied to medical research have demonstrated an exciting future with great potential to be developed into new medicines. Most of these compounds have exhibited strong pharmacological activities, including neurotoxicity, cytotoxicity and antiviral activity against HCMV, HSV-1, HHV-6 and HIV-1, so these metabolites could be promising candidates for COVID-19 treatment. Therefore, the effective large-scale production of natural marine products through synthesis is important for resolving the existing issues associated with chemical isolation, including small yields, and may be necessary to better investigate their biological activities. Herein, we highlight the total synthesized and stereochemical determinations of the cyanobacterial bioactive compounds. Furthermore, this review primarily focuses on the biotechnological applications of cyanobacteria, including applications as cosmetics, food supplements, and the nanobiotechnological applications of cyanobacterial bioactive compounds in potential medicinal applications for various human diseases are discussed.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

Sign in / Sign up

Export Citation Format

Share Document