Ray properties in the stems of Dahurian larch (Larix gmelinii) and Japanese larch (Larix kaempferi)

IAWA Journal ◽  
2020 ◽  
pp. 1-9
Author(s):  
Do Hoon Kim ◽  
Seong Hyun Kim ◽  
Jae Ik Jo ◽  
Jong Ho Kim ◽  
Byantara Darsan Purusatama ◽  
...  
Keyword(s):  
Epithelial Cell ◽  
Growth Ring ◽  
Wood Quality ◽  
Significant Negative Correlation ◽  
Cell Number ◽  
Japanese Larch ◽  
Larix Kaempferi ◽  
Dahurian Larch ◽  
Larch Wood ◽  
Ring Number

Abstract The radial variation of rays within the stems of Dahurian larch and Japanese larch growing in Korea was studied to obtain valuable information to identify the two species and determine wood quality. Uniseriate ray height, fusiform ray height, ray number, ray spacing, and epithelial cell number were investigated by optical microscopy. The heights of uniseriate and fusiform rays and epithelial cell numbers in Dahurian larch were lower than those in Japanese larch. Dahurian larch wood had greater ray number and ray spacing than Japanese larch wood. In both species, the heights of uniseriate and fusiform rays and epithelial cell number increased with increasing growth ring number but then stabilized from a certain growth ring number. However, ray number and ray spacing decreased with age but were stable toward the bark. There were significant differences in all ray properties between the two species. Furthermore, in both species, the number and spacing of rays showed a significant negative correlation with uniseriate ray height. The relationships between uniseriate and fusiform ray height, and between ray spacing and ray number were significantly positive. In conclusion, the results from this study provide basic information that can be used to identify these species, and the quality indices from ray properties will improve the effective utilization of the two woody species.

scholarly journals A COMPARATIVE STUDY ON THE PHYSICAL AND MECHANICAL PROPERTIES OF DAHURIAN LARCH AND JAPANESE LARCH GROWN IN KOREA

Wood Research ◽  
2021 ◽  
Vol 66 (3) ◽  
pp. 415-426
Author(s):  
Seong Hyun Kim ◽  
Do Hoon Kim ◽  
Jae Ik Jo ◽  
Jong Ho Kim ◽  
Seung Hwan Lee ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compression Strength ◽  
Growth Ring ◽  
Wood Quality ◽  
Ring Width ◽  
Physical And Mechanical Properties ◽  
Japanese Larch ◽  
Dahurian Larch ◽  
Growth Ring Width ◽  
Shearing Strength

To compare the wood quality of Dahurian larch and Japanese larch growing in Korea, the physical and mechanical properties were examined using the Korean standards. The proportion of heartwood was 82% and 72% in Dahurian and Japanese larch, respectively. The percentage of latewood was 42% in Dahurian larch and 35% in Japanese larch. The growth ring width of Dahurian larch was narrower than that of Japanese larch. Dahurian larch showed about 20% higher green moisture content compare to Japanese larch wood. Density and shrinkage of Dahurian larch were higher than Japanese larch. Axial compression strength, young`s modulus in compression, and shearing strength in heartwood of Dahurian larch were 11 MPa, 686 MPa, and 2.3 MPa, respectively, showing higher value than Japanese larch. The hardness was in the range of 13.8–38.7 MPa in Dahurian larch and 17.7–48.4 MPa in Japanese larch. The compression strength parallel to the grain and shearing strength in both species were significantly correlated with oven-dried density. Besides, the hardness in Dahurian larch was significantly correlated with latewood percentage and oven-dried density. In conclusion, the differences in the properties of both species were revealed and the results can be used for quality indices of both wood species.

A novel approach for the operational production of hybrid larch seeds under northern climatic conditions

2008 ◽  
Vol 84 (1) ◽  
pp. 95-104 ◽  
Author(s):  
Fabienne Colas ◽  
Martin Perron ◽  
Denise Tousignant ◽  
Carol Parent ◽  
Monique Pelletier ◽  
...  
Keyword(s):  
Wood Quality ◽  
Time Lag ◽  
Seed Orchard ◽  
Larix Decidua ◽  
Climatic Conditions ◽  
Snow Accumulation ◽  
Japanese Larch ◽  
Larix Kaempferi ◽  
Hybrid Larch ◽  
European Larch

Hybrid larch ([Larix × marschlinsii Coaz], HL) is sought after by the forest industry because of its growth characteristics, excellent wood quality and disease resistance. However, the difficulty in obtaining HL seeds limits the production of seedlings for reforestation. Both European larch (Larix decidua Mill.) and Japanese larch (Larix kaempferi [Lamb.] Carrière) produce few seeds and the time lag in their flowering phenology complicates their natural pollination. We have developed a novel type of sheltered seed orchard, dedicated to the production of HL seeds from grafts grown in pots. Inverting the arches of a conventional tunnel provides a sturdy structure which is easy to maintain. Because of its height, the tunnel can accommodate the rapid growth of the trees, which reduces the need for pruning. The tunnels are covered in the winter and spring. In the winter, the covers prevent snow accumulation. In the spring, they create a "greenhouse effect" inside the tunnels, accelerating flower development, preventing pollen contamination from trees outside the tunnels and protecting the flowers from late spring frosts. Over the past five years, flowering has been regular and abundant. Bagging the crowns for pollen harvest is cost-effective and yields large quantities of high quality pollen. Pollination operations are conducted using an electrostatic pistol. Because of the large number of available clones, large quantities of seeds with a high genetic variability can be produced at a competitive cost. In 2006, this seed orchard concept was implemented operationally at the Berthier forest nursery (Québec, Canada). Key words: Japanese larch (Larix kaempferi [Lamb.] Carrière), European larch (Larix decidua Mill.), seed production, electrostatic pollination, indoor seed orchard

scholarly journals Complete Chloroplast Genome of Japanese Larch (Larix kaempferi): Insights into Intraspecific Variation with an Isolated Northern Limit Population

Forests ◽  
2020 ◽  
Vol 11 (8) ◽  
pp. 884
Author(s):  
Shufen Chen ◽  
Wataru Ishizuka ◽  
Toshihiko Hara ◽  
Susumu Goto
Keyword(s):  
Chloroplast Genome ◽  
Intraspecific Variation ◽  
Japanese Larch ◽  
Monophyletic Group ◽  
Phylogenetic Position ◽  
Larix Kaempferi ◽  
Northern Limit ◽  
Complete Chloroplast Genome ◽  
Intraspecific Variations ◽  
Cpdna Markers

Research Highlights: The complete chloroplast genome for eight individuals of Japanese larch, including from the isolated population at the northern limit of the range (Manokami larch), revealed that Japanese larch forms a monophyletic group, within which Manokami larch can be phylogenetically placed in Japanese larch. We detected intraspecific variation for possible candidate cpDNA markers in Japanese larch. Background and Objectives: The natural distribution of Japanese larch is limited to the mountainous range in the central part of Honshu Island, Japan, with an isolated northern limit population (Manokami larch). In this study, we determined the phylogenetic position of Manokami larch within Japanese larch, characterized the chloroplast genome of Japanese larch, detected intraspecific variation, and determined candidate cpDNA markers. Materials and Methods: The complete genome sequence was determined for eight individuals, including Manokami larch, in this study. The genetic position of the northern limit population was evaluated using phylogenetic analysis. The chloroplast genome of Japanese larch was characterized by comparison with eight individuals. Furthermore, intraspecific variations were extracted to find candidate cpDNA markers. Results: The phylogenetic tree showed that Japanese larch forms a monophyletic group, within which Manokami larch can be phylogenetically placed, based on the complete chloroplast genome, with a bootstrap value of 100%. The value of nucleotide diversity (π) was calculated at 0.00004, based on SNP sites for Japanese larch, suggesting that sequences had low variation. However, we found three hyper-polymorphic regions within the cpDNA. Finally, we detected 31 intraspecific variations, including 19 single nucleotide polymorphisms, 8 simple sequence repeats, and 4 insertions or deletions. Conclusions: Using a distant genotype in a northern limit population (Manokami larch), we detected sufficient intraspecific variation for the possible candidates of cpDNA markers in Japanese larch.

scholarly journals Withdrawal Properties of Self-Tapping Screws in Japanese larch (Larix kaempferi (Lamb.) Carr.) Cross Laminated Timber

Forests ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 524
Author(s):  
Junhua Xu ◽  
Shuangbao Zhang ◽  
Guofang Wu ◽  
Yingchun Gong ◽  
Haiqing Ren
Keyword(s):  
Regression Model ◽  
Engineering Design ◽  
Wood Species ◽  
Japanese Larch ◽  
Effective Length ◽  
Larix Kaempferi ◽  
Cross Laminated Timber ◽  
The World ◽  
Different Types ◽  
Length Increment

With the increasing popularity of cross-laminated timber (CLT) constructions around the world, there have been attempts to produce CLT using local wood species in different countries, such as Japanese larch (Larix kaempferi (Lamb.) Carr.) in China. Thus, the need to investigate the connection performance also increases to support the design and construction of CLT buildings using local wood species. In this study, the withdrawal properties of three different types of self-tapping screws (STS), with a diameter of 6 mm, 8 mm, and 11 mm, were tested with Japanese larch CLT. The results revealed that the withdrawal strength of STS increased with increasing density and effective length, but decreased with an increasing diameter. With a density increment of 0.05 g/cm3, the withdrawal strength increased by an average of 9.4%. With an effective length increment of 24 mm, the withdrawal strength increased by an average of 1.4%. An empirical regression model was adopted to predict the withdrawal strength of Japanese larch CLT based on the results, which can be used for potential engineering design of CLT connections using STS.

Distribution of juvenile wood in two stems of Larixlaricina

1986 ◽  
Vol 16 (5) ◽  
pp. 1041-1049 ◽  
Author(s):  
K. C. Yang ◽  
C. A. Benson ◽  
J. K. Wong
Keyword(s):  
Juvenile Wood ◽  
Growth Ring ◽  
Ring Width ◽  
Tree Level ◽  
Growth Rings ◽  
Vertical Variation ◽  
Strong Negative Correlation ◽  
Ring Number ◽  
Tracheid Length ◽  
Growth Ring Width

The distribution and vertical variation of juvenile wood was studied in an 81-year-old dominant tree and an 83-year-old suppressed tree of Larixlaricina (Du Roi) K. Koch. Two criteria, growth ring width and tracheid length, were used to demarcate the boundary of juvenile wood. The width of juvenile wood, expressed in centimetres and the number of growth rings, decreased noticeably from the base to the top of the tree. The volume of juvenile wood decreased in a similar pattern. These decreasing trends had a strong negative correlation with the year of formation of cambial initials at a given tree level. The length of these cambial initials decreased with increasing age of formation of the cambial initials. In the juvenile wood zone, there was a positive linear regression between the growth ring number (age) and the tracheid length. The slopes of these regression lines at various tree levels increased as the age of the year of formation of the cambial initials increased. At a given tree level, the length of tracheids increased from the pith to a more uniform length near the bark. However, the number of years needed to attain a more uniform tracheid length decreased from the base to the top of the tree. These relationships suggest that the formation of juvenile wood is related to the year of formation of the cambial initials. Consequently, the juvenile wood is conical in shape, tapering towards the tree top.

A novel epithelial cell from neonatal rat lung: isolation and differentiated phenotype

1990 ◽  
Vol 259 (6) ◽  
pp. L415-L425 ◽  
Author(s):  
P. E. Roberts ◽  
D. M. Phillips ◽  
J. P. Mather
Keyword(s):  
Epithelial Cell ◽  
Molecular Mechanisms ◽  
Basal Medium ◽  
Fold Increase ◽  
Cell Types ◽  
Cell Number ◽  
Neonatal Rat ◽  
Rat Lung ◽  
Cell Type

A novel epithelial cell from normal neonatal rat lung has been isolated, established, and maintained for multiple passages in the absence of serum, without undergoing crisis or senescence. By careful manipulation of the nutrition/hormonal microenvironment, we have been able to select, from a heterogeneous population, a single epithelial cell type that can maintain highly differentiated features in vitro. This cell type has characteristics of bronchiolar epithelial cells. A clonal line, RL-65, has been selected and observed for greater than 2 yr in continuous culture. It has been characterized by ultrastructural, morphological, and biochemical criteria. The basal medium for this cell line is Ham's F12/Dulbecco's modified Eagle's (DME) medium plus insulin (1 micrograms/ml), human transferrin (10 micrograms/ml), ethanolamine (10(-4) M), phosphoethanolamine (10(-4) M), selenium (2.5 x 10(-8) M), hydrocortisone (2.5 x 10(-7) M), and forskolin (5 microM). The addition of 150 micrograms/ml of bovine pituitary extract to the defined basal medium stimulates a greater than 10-fold increase in cell number and a 50- to 100-fold increase in thymidine incorporation. The addition of retinoic acid results in further enhancement of cell growth and complete inhibition of keratinization. We have demonstrated a strategy that may be applicable to isolating other cell types from the lung and maintaining their differentiated characteristics for long-term culture in vitro. Such a culture system promises to be a useful model in which to study cellular events associated with differentiation and proliferation in the lung and to better understand the molecular mechanisms involved in these events.

scholarly journals Upgrading the fuel properties of hydrochar by co-hydrothermal carbonisation of dairy manure and Japanese larch (Larix kaempferi): product characterisation, thermal behaviour, kinetics and thermodynamic properties

2021 ◽  
Author(s):  
Mohammed Aliyu ◽  
Kazunori Iwabuchi ◽  
Takanori Itoh
Keyword(s):  
Thermal Behaviour ◽  
Total Pore Volume ◽  
Dairy Manure ◽  
Fuel Properties ◽  
Japanese Larch ◽  
Larix Kaempferi ◽  
Mass Ratio ◽  
Fixed Carbon ◽  
Solid Biofuel ◽  
Hydrothermal Carbonisation

AbstractThis study investigated co-hydrothermal carbonisation (co-HTC) of dairy manure (DM) and wood shavings from Larix kaempferi, commonly known as the Japanese larch (JL) to enhance the fuel properties of the resulting hydrochar. The JL was mixed with the DM at 25, 50 and 75 wt.% ratios. Co-HTC was conducted at 260 °C for 20 min. The resulting hydrochars were characterised based on the physicochemical properties and the thermal behaviour. Results showed that the hydrochar solid biofuel properties improved as the ratio of JL was increased. The produced hydrochars were in the region of lignite and closed to the region of the coal with increased fixed carbon, carbon contents and lowered H/C and O/C ratios. Hydrochar with ash content of 7.2 ± 0.5% was obtained at 75 wt.% JL. In addition, the HHV of hydrochar increased remarkably to 26.4 ± 0.02 MJ/kg as the mass ratio of the JL was increased. The surface morphology of the hydrochars were altered and became distinct while the specific surface area (SSA) and the total pore volume (TPV) of the hydrochars increased at increasing the mass ratio of the JL. The surface functional groups were also altered by the co-HTC process. A decline in the combustion performance was observed after the HTC process but improved at 75 wt.% JL after the co-HTC process. The kinetic analysis also revealed that the activation energy decreased after the HTC process but increased to a higher value at 50 wt.% JL after the co-HTC process. Therefore, hydrochar production by co-HTC of DM and JL has proved to be an effective and promising solid biofuel source. Graphical abstract

scholarly journals Long-term bending properties of cross-laminated timber made from Japanese larch under constant environment

2021 ◽  
Vol 67 (1) ◽  
Author(s):  
Ryuya Takanashi ◽  
Yoshinori Ohashi ◽  
Wataru Ishihara ◽  
Kazushige Matsumoto
Keyword(s):  
Load Capacity ◽  
Creep Rupture ◽  
Japanese Larch ◽  
Larix Kaempferi ◽  
Loading Capacity ◽  
Loading Test ◽  
Cross Laminated Timber ◽  
Duration Of Load ◽  
Rupture Behavior

AbstractCross-laminated timber (CLT) has been used extensively in timber construction. CLT panels are typically used in roofs and floors that carry a continuous load, and it is important to examine the long-term loading capacity of CLT. However, studies that focus on the long-term loading capacity of CLT are limited. To this end, we conducted long-term out-of-plane bending tests on seven-layer CLT made from Japanese larch (Larix kaempferi) under constant environmental conditions, investigated creep performance and duration of load, and experimentally analyzed creep rupture behavior. The mean estimated relative creep after 50 years was 1.49. The sample showed a satisfactory resistance to creep as a building material. The duration of load of most of the specimens in this study was shorter than the conventional value of small clear wood specimens. Specimens had a lower duration of load capacity than solid lumber. According to the results of survival analysis, a loading level of 70% or more caused the initial failure of specimens. Creep rupture of most of the specimens occurred at less deflection than displacement at failure in the short-term loading test. Additional studies focusing on the effects of finger joints, transverse layers, and width of a specimen on creep rupture behavior are suggested.

Sign in / Sign up

Export Citation Format

Share Document