A Review on the Use of Hybrid Nanofluid in a Solar Flat Plate and Parabolic Trough Collectors and Its Enhanced Collector Thermal Efficiency

2021 ◽  
Vol 10 (2) ◽  
pp. 147-171
Author(s):  
L. Syam Sundar ◽  
Solomon Mesfin ◽  
Yihun Tefera Sintie ◽  
V. Punnaiah ◽  
Ali J. Chamkha ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Flat Plate ◽  
Thermal Efficiency ◽  
Energy Demand ◽  
Fossil Fuel ◽  
Working Fluid ◽  
Solar Collectors ◽  
The World ◽  
Hybrid Nanofluids ◽  
Flat Plate Collector

Energy demand is high in all parts of the world, mostly in all industrial sectors. To meet the energy demand the fossil fuel is the only way. Due to rapid industrial growth and use of fossil fuel result in global warming and environmental pollution. Moreover, the limited availability of the fossil fuels, it is necessary to depend on the renewable energy sources. Promising renewable energy in the world is solar energy, which is available largely on the earth surface. The solar energy can be converted into thermal energy in the solar flat plate collector. The collector thermal efficiency is purely depends on the working fluid used in it. Most of the studies revealed that replacing the working fluid with high thermal conductivity fluids called as nanofluids and hybrid nanofluids can improve the collector thermal efficiency. Few decades back studies have been conducted with nanofluids in solar collectors. Currently the researchers are working on solar collectors for further improvement of its efficiency using hybrid nanofluids. In this review paper, we will discuss about the synthesis of hybrid nanoparticles, hybrid nanofluids, characterization, thermophysical properties, and application of hybrid nanofluids in solar flat plate collector under natural and forced circulation of fluid. The research gap in the solar collector is also discussed in this article. This paper also explains about the heat transfer capabilities of hybrid nanofluids especially used solar collectors.

Thermodynamic analysis of hybrid nanofluid based solar flat plate collector

2018 ◽  
Vol 15 (1) ◽  
pp. 27-39
Author(s):  
Ranga Babu J.A. ◽  
Kiran Kumar K. ◽  
Srinivasa Rao S.
Keyword(s):  
Pressure Drop ◽  
Flat Plate ◽  
Hybrid Nanoparticles ◽  
Working Fluid ◽  
Hybrid Nanofluid ◽  
Heat Gain ◽  
Content Type ◽  
Energy And Exergy ◽  
Hybrid Nanofluids ◽  
Flat Plate Collector

Purpose This paper aims to present an analytical investigation of energy and exergy performance on a solar flat plate collector (SFPC) with Cu-CuO/water hybrid nanofluid, Cu/water and CuO/water nanofluids as collector running fluids. Design/methodology/approach Heat transfer characteristics, pressure drop and energy and exergy efficiencies of SFPC working on these nanofluids are investigated and compared. In this study, a comparison is made by varying the mass flow rates and nanoparticle volume concentration. Thermophysical properties of hybrid nanofluids are estimated using distinctive correlations available in the open literature. Then, the influence of these properties on energy and exergy efficiencies of SFPC is discussed in detail. Findings Energy analysis reveals that by introducing the hybrid nanoparticles in water, the thermal conductivity of the working fluid is enhanced by 17.52 per cent and that of the individual constituents is enhanced by 15.72 and 15.35 per cent for Cu/water and CuO/water nanofluids, respectively. This resulted in 2.16 per cent improvement in useful heat gain for hybrid nanofluid and 1.03 and 0.91 per cent improvement in heat gain for Cu/water and CuO/water nanofluids, respectively. In line with the above, the collector efficiency increased by 2.175 per cent for the hybrid nanofluid and 0.93 and 1.05 per cent enhancement for Cu/water and CuO/water nanofluids, respectively. Exergy analysis elucidates that by using the hybrid nanofluid, exergy efficiency is increased by 2.59 per cent, whereas it is 2.32 and 2.18 per cent enhancement for Cu/water and CuO/water nanofluids, respectively. Entropy generation is reduced by 3.31, 2.35 and 2.96 per cent for Cu-CuO/water, Cu/water and CuO/water nanofluids, respectively, as compared to water. Research limitations/implications However, this is associated with a penalty of increment in pressure drop of 2.92, 3.09 and 2.74 per cent for Cu-CuO/water, Cu/water and CuO/water nanofluids, respectively, compared with water. Originality/value It is clear from the analysis that Cu-CuO/water hybrid nanofluids possess notable increment in both energy and exergy efficiencies to use them in SFPCs.

scholarly journals Improving the Thermal Efficiency of Flat Plate Solar Collector Using Nano-Fluids as a Working Fluids: A Review

2021 ◽  
Vol 8 (3) ◽  
Author(s):  
Saif Ali Kadhim ◽  
Osama Abd AL-Munaf Ibrahim
Keyword(s):  
Flat Plate ◽  
Thermal Efficiency ◽  
Solar Collector ◽  
Base Fluid ◽  
Working Fluid ◽  
Solar Collectors ◽  
Nano Fluid ◽  
Flat Plate Solar Collector ◽  
Nano Fluids ◽  
Better Than

Solar energy is one of the most important types of renewable energy and is characterized by its availability, especially in Iraq. It can be used in many applications, including supply thermal energy by solar collectors. Improving the thermal efficiency of solar collector leads to an increase in the thermal energy supplied. Using a nano-fluid instead of base fluid (water is often used) as a working fluid is a method many used to increase the thermal efficiency of solar collectors. In this article, the latest research that used nano-fluid as a working fluid in evaluating the thermal efficiency of solar collector, type flat plate was reviewed. The thermal efficiency improvement of flat plate solar collector was reviewed based on the type of nanoparticles (metal oxides, semiconductors oxides, carbon compounds) used in the base fluid and comparison was made between these nanoparticles under the same conditions. Moreover, the effect of varying the concentration of nanoparticles in the base fluid and changing the working fluid flow rate on the thermal efficiency of flat plate solar collector was also reviewed. The results of the review showed that nano-fluids containing carbon compounds are better than other nano-fluids and that copper oxide is better than the rest of the metal oxides used in improving the thermal efficiency of flat plate solar collectors.

scholarly journals Optimal design of compact organic Rankine cycle units for domestic solar applications

2014 ◽  
Vol 18 (3) ◽  
pp. 811-822 ◽  
Author(s):  
Luca Barbazza ◽  
Leonardo Pierobon ◽  
Alberto Mirandola ◽  
Fredrik Haglind
Keyword(s):  
Heat Exchanger ◽  
Water Temperature ◽  
Flat Plate ◽  
Thermal Efficiency ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Hot Water ◽  
Working Fluid ◽  
Solar Collectors ◽  
Allowable Temperature

Organic Rankine cycle turbogenerators are a promising technology to transform the solar radiation harvested by solar collectors into electric power. The present work aims at sizing a small-scale organic Rankine cycle unit by tailoring its design for domestic solar applications. Stringent design criteria, i. e., compactness, high performance and safe operation, are targeted by adopting a multi-objective optimization approach modeled with the genetic algorithm. Design-point thermodynamic variables, e. g., evaporating pressure, the working fluid, minimum allowable temperature differences, and the equipment geometry, are the decision variables. Flat plate heat exchangers with herringbone corrugations are selected as heat transfer equipment for the preheater, the evaporator and the condenser. The results unveil the hyperbolic trend binding the net power output to the heat exchanger compactness. Findings also suggest that the evaporator and condenser minimum allowable temperature differences have the largest impact on the system volume and on the cycle performances. Among the fluids considered, the results indicate that R1234yf and R1234ze are the best working fluid candidates. Using flat plate solar collectors (hot water temperature equal to 75 ?C), R1234yf is the optimal solution. The heat exchanger volume ranges between 6.0 and 23.0 dm3, whereas the thermal efficiency is around 4.5%. R1234ze is the best working fluid employing parabolic solar collectors (hot water temperature equal to 120 ?C). In such case the thermal efficiency is around 6.9%, and the heat exchanger volume varies from 6.0 to 18.0 dm3.

First and Second Law Analysis of a Flat Plate Collector Working With Nanofluids

2018 ◽  
Author(s):  
M. T. Nitsas ◽  
I. P. Koronaki ◽  
L. Prentza
Keyword(s):  
Flat Plate ◽  
Second Law Of Thermodynamics ◽  
Climatic Conditions ◽  
Working Fluid ◽  
Second Law ◽  
Inlet Temperature ◽  
Water Tank ◽  
Systems Quality ◽  
Typical Day ◽  
Flat Plate Collector

The utilization of solar energy in thermal energy systems was and always be one of the most effective alternative to conventional energy resources. Energy efficiency is widely used as one of the most important parameters in order to evaluate and compare thermal systems including solar collectors. Nevertheless, the first law of thermodynamics is not solely capable of describing the quantitative and qualitative performance of such systems and thus exergy efficiency is used so as to introduce the systems’ quality. In this work, the performance of a flat plate solar collector using water based nanofluids of different nanoparticle types as a working fluid is analyzed theoretically under the climatic conditions in Greece based on the First and Second Law of Thermodynamics. A mathematical model is built and the model equations are solved iteratively in a MATLAB code. The energy and exergy efficiencies as well as the collector losses coefficient for various parameters such as the inlet temperature, the particles concentration and type are determined. Moreover, a dynamic model is built so as to determine the performance of a flat plate collector working with nanofluids and the useful energy that can be stored in a water tank. The exergy destruction and exergy leakage are determined for a typical day in summer during which high temperatures and solar intensity values are common for the Greek climate.

scholarly journals An experimental study of the thermal performance of the square and rhombic solar collectors

2018 ◽  
Vol 22 (1 Part B) ◽  
pp. 487-494 ◽  
Author(s):  
Aminreza Noghrehabadi ◽  
Ebrahim Hajidavaloo ◽  
Mojtaba Moravej ◽  
Ali Esmailinasab
Keyword(s):  
Experimental Study ◽  
Flat Plate ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Thermal Performance ◽  
Thermal Efficiency ◽  
Solar Collectors ◽  
Heating Systems ◽  
Solar Water Heating

Solar collectors are the key part of solar water heating systems. The most widely produced solar collectors are flat plate solar collectors. In the present study, two types of flat plate collectors, namely square and rhombic collectors are experi?mentally tested and compared and the thermal performance of both collectors is investigated. The results show both collectors have the same performance around noon (?61%), but the rhombic collector has better performance in the morning and afternoon. The values for rhombic and square collectors are approximately 56.2% and 53.5% in the morning and 56.1% and 54% in the afternoon, respectively. The effect of flow rate is also studied. The thermal efficiency of rhombic and square flat plate collectors increases in proportion to the flow rate. The results indicated the rhombic collector had better performance in comparison with the square collector with respect to the mass-flow rate.

scholarly journals Utilization of Zinc-Ferrite/ Water Hybrid Nanofluids for enhancing thermal performance of a Flat Plate Solar Collector -An Analytical Study

2021 ◽  
Author(s):  
Prakasam Michael Joseph stalin ◽  
Thottipalayam Vellingri Arjunan ◽  
Mohammed Abdulrahman Almeshaal ◽  
Palaniappan Murugesan ◽  
Balaramachandran Prabu ◽  
...  
Keyword(s):  
Flat Plate ◽  
Thermal Performance ◽  
Working Fluid ◽  
Heat Transfer Fluids ◽  
Solar Thermal Collector ◽  
Energy And Exergy ◽  
Hybrid Nanofluids ◽  
Exergy Transfer ◽  
Flat Plate Solar Collector ◽  
Thermo Physical Properties

Abstract Thermodynamic performance analysis is carried out on a flat plate solar thermal collector utilizing single and hybrid nanofluids. As heat transfer fluids, Fe2O4/water, Zn-Fe2O4/water hybrid nanofluids, and water are used, and its performance are compared based on the energy and exergy transfer rate. The thermo-physical properties are evaluated by regression polynomial model for all the working fluids. Developed codes in MATLAB solve the collector's thermal model iteratively, energy and exergetic performance are evaluated. The system was then subjected to parametric investigation and optimization for variations in fluid flow rate, temperatures, and concentrations of nanoparticles. The findings show that utilizing Zn-Fe2O4/water hybrid nanofluids with a particle concentration of 0.5 percent enhanced the solar collector's thermal performance by 6.6% while using Fe2O4/water nanofluids raised the collector's thermal performance by 7.83% when compared to water as the working fluid. While hybrid nanofluids give a better thermal alternative than water and single nanofluids, they have also produced a 5.36% increase in exergetic efficiency and an enhancement of 8.24 percent when used with Fe2O4/water nanofluids.

scholarly journals Aplicaciones del Captador Solar de Placa Plana y del Captador de Tubo de Vacío en la Edificación = Applications of the Flat Plate Solar Collectors and the Vacuum Tube Solar Collectors in Building

2018 ◽  
Vol 4 (3) ◽  
pp. 25 ◽  
Author(s):  
Daniel Ferrández ◽  
Carlos Moron ◽  
Jorge Pablo Díaz ◽  
Pablo Saiz
Keyword(s):  
Flat Plate ◽  
Solar Collector ◽  
Energy Demand ◽  
Hot Water ◽  
Solar Thermal ◽  
Solar Collectors ◽  
Thermal Systems ◽  
Vacuum Tube ◽  
Solar Thermal Collectors ◽  
Flat Plate Solar Collector

ResumenEl actual Código Técnico de la Edificación (CTE) pone de manifiesto la necesidad de cubrir parte de la demanda energética requerida para el abastecimiento de agua caliente sanitaria y climatización de piscinas cubiertas mediante sistemas de aprovechamiento de la energía solar térmica. En este artículo se presenta una comparativa entre las dos principales tipologías de captadores solares térmicos que existen en el mercado: el captador de placa plana y el captador de tubo de vacío, atendiendo a criterios de fracción solar, diseño e integración arquitectónica. Todo ello a fin de discernir en qué circunstancias es más favorable el uso de uno u otro sistema, comparando los resultados obtenidos mediante programas de simulación con la toma de medidas in situ.AbstractThe current Technical Building Code (CTE) highlights the need to cover part of the energy demand required for the supply of hot water and heating of indoor swimming pools using solar thermal systems. This article presents a comparison between the two main types of solar thermal collectors that exist in the market: the flat plate solar collector and the vacuum tube solar collector, according to criteria of solar fraction, design and architectural integration. All of this in order to discern in what circumstances the use of one or the other system is more favourable, comparing the results obtained through simulation programs with the taking of measurements in situ.

Improved Biogas Production from Corn Stalks, Pig Manure and Eggshell

2021 ◽  
pp. 39-47
Author(s):  
U. A. Adekola ◽  
I. Eiroboyi ◽  
Y. Yerima ◽  
T. E. B. Akinmoji ◽  
L. O. Uti
Keyword(s):  
Energy Source ◽  
Renewable Energy Source ◽  
Renewable Energy ◽  
Room Temperature ◽  
Fossil Fuel ◽  
Biogas Production ◽  
Pig Manure ◽  
Corn Stalk ◽  
The World ◽  
Main Substrate

The need for an environmentally friendly energy source in the world has led to major diversification in renewable energy. Biogas provides a renewable energy source that will replace fossil fuel inevitably. The experiment was carried out using a self-designed laboratory-scale anaerobic biogas digester. The study was carried out at room temperature from 25 - 31°C for 20 days using corn stalk as the main substrate while Pig manure and eggshell were used as co-substrates. The findings showed that the biogas produced from the sample containing a blend of corn stalk, Pig manure, and eggshell resulted in higher biogas volume than the sample containing corn stalk and eggshell, corn stalk, and pig manure as well as the sample containing only corn stalk. This implies that the use of the corn stalk blend is a source of renewable energy. Thus, ensuring the sustainability of biogas production in the future.

Sign in / Sign up

Export Citation Format

Share Document