Turbulent Nanofluid Flow Analysis Passing a Shell and Tube Thermal Exchanger with Kays-Crawford Model

2021 ◽  
Vol 10 (4) ◽  
pp. 518-537
Author(s):  
R. Nasrin ◽  
S. A. Sweety ◽  
I. Zahan
Keyword(s):  
Heat Transfer ◽  
Volume Fraction ◽  
Pure Water ◽  
Fluid Velocity ◽  
Solid Volume Fraction ◽  
Heat Transfer Analysis ◽  
Inlet Temperature ◽  
Industrial Sectors ◽  
Shell And Tube ◽  
Thermal Exchanger

Temperature dissipation in a proficient mode has turned into a crucial challenge in industrial sectors because of worldwide energy crisis. In heat transfer analysis, shell and tube thermal exchangers is one of the mostly used strategies to control competent heat transfer in industrial progression applications. In this research, a numerical analysis of turbulent flow has been conceded in a shell and tube thermal exchanger using Kays-Crawford model to investigate the thermal performance of pure water and different concentrated water-MWCNT nanofluid. By means of finite element method the Reynold-Averaged Navier-Stokes (RANS) and heat transport equations along with suitable edge conditions have been worked out numerically. The implications of velocity, solid concentration, and temperature of water-MWCNT nanofluid on the fluid flow formation and heat transfer scheme have been inspected thoroughly. The numerical results indicate that the variation of nanoparticles solid volume fraction, inflow fluid velocity and inlet temperature mannerism considerably revolutionize in the flow and thermal completions. It is perceived that using 3% concentrated water-MWCNT nanofluid, higher rate of heat transfer 12.24% is achieved compared that of water and therefore to enhance the efficiency of this heat exchanger. Furthermore, a new correlation has been developed among obtained values of thermal diffusion rate, Reynolds number and volume concentration of nanoparticle and found very good correlation coefficient among the values.

scholarly journals Heat transfer analysis of nanofluid flow through backward facing step

2020 ◽  
Vol 307 ◽  
pp. 01010 ◽  
Author(s):  
Ahlem Boudiaf ◽  
Fetta Danane ◽  
Youb Khaled Benkahla ◽  
Walid Berabou ◽  
Mahdi Benzema ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Thermal Characteristics ◽  
Heat Transfer Analysis ◽  
Backward Facing Step ◽  
Nanofluid Flow ◽  
Numerical Predictions ◽  
Flow Through ◽  
Volume Method

This paper presents the numerical predictions of hydrodynamic and thermal characteristics of nanofluid flow through backward facing step. The governing equations are solved through the finite volume method, as described by Patankar, by taking into account the associated boundary conditions. Empirical relations were used to give the effective dynamic viscosity and the thermal conductivity of the nanofluid. Effects of different key parameters such as Reynolds number, nanoparticle solid volume fraction and nanoparticle solid diameter on the heat transfer and fluid flow are investigated. The results are discussed in terms of the average Nusselt number and streamlines.

scholarly journals Natural convective flow in circular and arc cavities filled with water-cu nanofluid: a comparative study

2018 ◽  
Vol 15 (1) ◽  
pp. 37-52 ◽  
Author(s):  
Khandker Farid Uddin Ahmed ◽  
Rehena Nasrin ◽  
Md. Elias
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Pure Water ◽  
Solid Volume Fraction ◽  
Viscous Force ◽  
Wide Range ◽  
Prandtl Numbers

The fluid flow and heat transfer mechanism on steady state solutions obtained in circular and arc-square enclosures filled with water/Cu nanofluid as well as base fluid has been investigated numerically by Galerkin's weighted residual finite element procedure. The left and right boundaries of the cavities are, respectively, heated and cooled at constant temperatures, while their horizontal walls are adiabatic. Effects of buoyancy force (Rayleigh number) and viscous force (Prandtl number) with a wide range of Ra (103 - 106) and Pr (4.2 - 6.2) on heat transfer phenomenon inside cavities are observed. The fluid flow and temperature gradient are shown by streamlines and isotherms patterns. From the investigation, it is reported that the Rayleigh and Prandtl numbers are playing significant role in heat transfer rate. The variation in heat transfer is calculated in terms of average Nusselt number. Heat transfer rate is found to be higher for water/Cu nanofluid with 2% solid volume fraction than pure water. About 2.7% higher heat transfer rate is obtained for circular cavity than that of arc cavity using water/Cu nanofluid at Ra = 104 and Pr = 5.8.

Effect of nanofluids on heat transfer and cooling system of the photovoltaic/thermal performance

2019 ◽  
Vol 29 (6) ◽  
pp. 1920-1946 ◽  
Author(s):  
Rehena Nasrin ◽  
Md. Hasanuzzaman ◽  
N.A. Rahim
Keyword(s):  
Heat Transfer ◽  
Numerical Model ◽  
Thermal Performance ◽  
Thermal Efficiency ◽  
Volume Fraction ◽  
Cooling System ◽  
Solid Volume Fraction ◽  
Inlet Temperature ◽  
Content Type ◽  
Water Based

PurposeEffective cooling is one of the challenges for photovoltaic thermal (PVT) systems to maintain the PV operating temperature. One of the best ways to enhance rate of heat transfer of the PVT system is using advanced working fluids such as nanofluids. The purpose of this research is to develop a numerical model for designing different form of thermal collector systems with different materials. It is concluded that PVT system operated by nanofluid is more effective than water-based PVT system.Design/methodology/approachIn this research, a three-dimensional numerical model of PVT with new baffle-based thermal collector system has been developed and solved using finite element method-based COMSOL Multyphysics software. Water-based different nanofluids (Ag, Cu, Al, etc.), various solid volume fractions up to 3 per cent and variation of inlet temperature (20-40°C) have been applied to obtain high thermal efficiency of this system.FindingsThe numerical results show that increasing solid volume fraction increases the thermal performance of PVT system operated by nanofluids, and optimum solid concentration is 2 per cent. The thermal efficiency is enhanced approximately by 7.49, 7.08 and 4.97 per cent for PVT system operated by water/Ag, water/Cu and water/Al nanofluids, respectively, compared to water. The extracted thermal energy from the PVT system decreases by 53.13, 52.69, 42.37 and 38.99 W for water, water/Al, water/Cu and water/Ag nanofluids, respectively, due to each 1°C increase in inlet temperature. The heat transfer rate from heat exchanger to cooling fluid enhances by about 18.43, 27.45 and 31.37 per cent for the PVT system operated by water/Al, water/Cu, water/Ag, respectively, compared to water.Originality/valueThis study is original and is not being considered for publication elsewhere. This is also not currently under review with any other journal.

Experimental investigation of Silver / Water nanofluid heat transfer in car radiator

2021 ◽  
Vol 15 (1) ◽  
pp. 7743-7753
Author(s):  
H. T. Jarrah ◽  
S. S. Mohtasebi ◽  
E. Ettefaghi ◽  
F. Jaliliantabar
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Performance ◽  
Volume Fraction ◽  
Cooling System ◽  
Pure Water ◽  
Research Work ◽  
Inlet Temperature ◽  
Transfer Performance ◽  
Heat Transfer Efficiency ◽  
Low Concentrations

Currently available fluids for heat transfer including refrigerants, water, ethylene glycol mixture, etc., have been widely exploited in various fields, especially in automobile cooling systems, for many years. However, these fluids possess poor heat transfer capability which means that to achieve acceptable heat transfer activity, high compactness and effectiveness of heat transfer systems are essential. This research work concentrates on preparation and use of water based Silver containing nanofluids in automobile cooling system. Nanoparticles volume fraction, fluid inlet temperature, coolant and air Reynolds numbers were optimized so that the heat transfer performance of the car radiator system was totally improved. It was found that increasing these parameters leads to enhancement of the heat transfer performance. In the best condition, the Ag/water nanofluids with low concentrations could amend heat transfer efficiency up to 30.2% in comparison to pure water.

scholarly journals Mixed Convection Heat Transfer for Nanofluids in a Lid-Driven Shallow Rectangular Cavity Uniformly Heated and Cooled from the Vertical Sides: The Cooperative Case

2012 ◽  
Vol 2012 ◽  
pp. 1-16 ◽  
Author(s):  
Hassan Elharfi ◽  
Mohamed Naïmi ◽  
Mohamed Lamsaadi ◽  
Abdelghani Raji ◽  
Mohammed Hasnaoui
Keyword(s):  
Heat Transfer ◽  
Mixed Convection ◽  
Volume Fraction ◽  
Pure Water ◽  
Solid Volume Fraction ◽  
Rectangular Cavity ◽  
Temperature Fields ◽  
Vertical Side ◽  
Simpler Algorithm ◽  
Wide Range

A study of mixed convection, in a shallow lid-driven rectangular cavity filled with water-based nanofluids and subjected to uniform heat flux along the vertical side walls, has been performed numerically by solving the full governing equations via the finite volume method and the SIMPLER algorithm. In the limit of a shallow enclosure, these equations have been considerably reduced by using the parallel flow approximation. Solutions, for the flow and temperature fields, and the heat transfer rate, have been obtained as functions of the governing parameters, namely, the Reynolds (Re) and the Richardson (Ri) numbers and the solid volume fraction of nanoparticles (Φ). A good agreement has been obtained between the results of the two approaches for a wide range of the governing parameters. Moreover, it has been found that the addition of Cu-nanoparticles, into the pure water, leads to an enhancement or a degradation of heat transfer depending on the values of Re and Ri.

Effects of uniform or non-uniform heating at bottom wall on MHD mixed convection in a porous cavity saturated by nanofluid

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Subramanian Muthukumar ◽  
Selvaraj Sureshkumar ◽  
Arthanari Malleswaran ◽  
Murugan Muthtamilselvan ◽  
Eswari Prem
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Darcy Number ◽  
Bottom Wall ◽  
Uniform Heating ◽  
The Magnetic Field

Abstract A numerical investigation on the effects of uniform and non-uniform heating of bottom wall on mixed convective heat transfer in a square porous chamber filled with nanofluid in the appearance of magnetic field is carried out. Uniform or sinusoidal heat source is fixed at the bottom wall. The top wall moves in either positive or negative direction with a constant cold temperature. The vertical sidewalls are thermally insulated. The finite volume approach based on SIMPLE algorithm is followed for solving the governing equations. The different parameters connected with this study are Richardson number (0.01 ≤ Ri ≤ 100), Darcy number (10−4 ≤ Da ≤ 10−1), Hartmann number (0 ≤ Ha ≤ 70), and the solid volume fraction (0.00 ≤ χ ≤ 0.06). The results are presented graphically in the form of isotherms, streamlines, mid-plane velocities, and Nusselt numbers for the various combinations of the considered parameters. It is observed that the overall heat transfer rate is low at Ri = 100 in the positive direction of lid movement, whereas it is low at Ri = 1 in the negative direction. The average Nusselt number is lowered on growing Hartmann number for all considered moving directions of top wall with non-uniform heating. The low permeability, Da = 10−4 keeps the flow pattern same dominating the magnetic field, whereas magnetic field strongly affects the flow pattern dominating the high Darcy number Da = 10−1. The heat transfer rate increases on enhancing the solid volume fraction regardless of the magnetic field.

scholarly journals A sensitivity study on carbon nanotubes significance in Darcy–Forchheimer flow towards a rotating disk by response surface methodology

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Anum Shafiq ◽  
Tabassum Naz Sindhu ◽  
Qasem M. Al-Mdallal
Keyword(s):  
Heat Transfer ◽  
Carbon Nanotubes ◽  
Ethylene Glycol ◽  
Biot Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Rotating Disk ◽  
Sensitivity Study ◽  
Basic Fluid ◽  
Walled Cnts

AbstractThe current research explores incremental effect of thermal radiation on heat transfer improvement corresponds to Darcy–Forchheimer (DF) flow of carbon nanotubes along a stretched rotating surface using RSM. Casson carbon nanotubes’ constructed model in boundary layer flow is being investigated with implications of both single-walled CNTs and multi-walled CNTs. Water and Ethylene glycol are considered a basic fluid. The heat transfer rate is scrutinized via convective condition. Outcomes are observed and evaluated for both SWCNTs and MWCNTs. The Runge–Kutta Fehlberg technique of shooting is utilized to numerically solve transformed nonlinear ordinary differential system. The output parameters of interest are presumed to depend on governing input variables. In addition, sensitivity study is incorporated. It is noted that sensitivity of SFC via SWCNT-Water becomes higher by increasing values of permeability number. Additionaly, sensitivity of SFC via SWCNT-water towards the permeability number is higher than the solid volume fraction for medium and higher permeability levels. It is also noted that sensitivity of SFC (SWCNT-Ethylene-glycol) towards volume fraction is higher for increasing permeability as well as inertia coefficient. Additionally, the sensitivity of LNN towards the Solid volume fraction is higher than the radiation and Biot number for all levels of Biot number. The findings will provide initial direction for future device manufacturing.

Quantitative Experimental Study of SiO2-Water Nanofluids on Backward-Facing Step Flow under Low Reynolds Number

2018 ◽  
Vol 916 ◽  
pp. 221-225
Author(s):  
Ji Zu Lv ◽  
Liang Yu Li ◽  
Cheng Zhi Hu ◽  
Min Li Bai ◽  
Sheng Nan Chang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Reynolds Number ◽  
Volume Fraction ◽  
Pure Water ◽  
Experimental Studies ◽  
Flow Characteristics ◽  
Thermal Engineering ◽  
Heat Transfer Medium ◽  
Step Flow

Nanofluids is an innovative study of nanotechnology applied to the traditional field of thermal engineering. It refers to the metal or non-metallic nanopowder was dispersed into water, alcohol, oil and other traditional heat transfer medium, to prepared as a new heat transfer medium with high thermal conductivity. The role of nanofluids in strengthening heat transfer has been confirmed by a large number of experimental studies. Its heat transfer mechanism is mainly divided into two aspects. On the one hand, the addition of nanoparticles enhances the thermal conductivity. On the other hand, due to the interaction between the nanoparticles and base fluid causing the changes in the flow characteristics, which is also the main factor affecting the heat transfer of nanofluids. Therefore, a intensive study on the flow characteristics of nanofluids will make the study of heat transfer more meaningful. In this experiment, the flow characteristics of SiO2-water nanofluids in two-dimensional backward step flow are quantitatively studied by PIV. The results show that under the same Reynolds number, the turbulence of nanofluids is larger than that of pure water. With the increase of nanofluids volume fraction, the flow characteristics are constantly changing. The quantitative analysis proved that the nanofluids disturbance was enhanced compared with the base liquid, which resulting in the heat transfer enhancement.

scholarly journals Numerical Analysis of Nanofluids in Differentially Heated Enclosure Undergoing Orthogonal Rotation

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
H. Saleh ◽  
I. Hashim
Keyword(s):  
Heat Transfer ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Heat Transfer ◽  
Staggered Grid ◽  
Governing Equations ◽  
Nanoparticles Concentration ◽  
Quantity Of Heat ◽  
Velocity Pressure

Natural convection heat transfer in a rotating, differentially heated enclosure is studied numerically in this paper. The rotating enclosure is filled with water-Ag, water-Cu, water-Al2O3, or water-TiO2nanofluids. The governing equations are in velocity, pressure, and temperature formulation and solved using the staggered grid arrangement together with MAC method. The governing parameters considered are the solid volume fraction,0.0 ≤ ϕ ≤ 0.05, and the rotational speeds,3.5≤ Ω ≤ 17.5 rpm, and the centrifugal force is smaller than the Coriolis force and both forces were kept below the buoyancy force. It is found that the angular locations of the local maximums heat transfer were sensitive to rotational speeds and nanoparticles concentration. The global quantity of heat transfer rate increases about 1.5%, 1.1%, 0.8%, and 0.6% by increasing 1%ϕof the nanoparticles Ag, Cu, Al2O3, and TiO2, respectively, for the considered rotational speeds.

scholarly journals Heat transfer studies in compact heat exchanger using ZnO and TiO2 nanofluids in ethylene glycol/water

2018 ◽  
Vol 24 (4) ◽  
pp. 309-318
Author(s):  
Srinivasan Manikandan ◽  
Rajoo Baskar
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Ethylene Glycol ◽  
Volume Fraction ◽  
Inlet Temperature ◽  
Percentage Increase ◽  
Cold Side ◽  
Volume Fractions ◽  
Experimental Values ◽  
Tio2 Nanofluids

This paper reports an experimental study on the heat transfer characteristics of a nanofluid consisting of ZnO/water/ethylene glycol (EG) and TiO2/water/ /ethylene glycol. In this study, the base fluids of ethylene glycol (EG):water (W) with volume fractions of 30:70, 40:60, and 50:50 were prepared, and 0.2 to 1.0 volume fractions of ZnO and TiO2 nanofluids were used as a cold side fluid. The prime objective of this study is to identify the effects of nanofluid concentration and three different hot fluid inlet temperatures viz., 55, 65 and 75?C C on the heat transfer enhancement of cold side fluid. The results are compared with base fluids and the percentage increase of the Nusselt number because of nanoparticle addition is noted both experimentally and theoretically. The results showed that at the hot fluid inlet temperature of 75?C, the increase in the Nusselt number is maximum with volume concentrations of 0.6 and 0.8% for ZnO and TiO2 nanofluids, respectively. The corresponding maximum Nusselt number enhancements are about 11.5 and 21.4%, respectively, for the base fluid volume fraction of 30:70 (EG:W). There is good agreement between the results calculated from experimental values and the correlation.

Sign in / Sign up

Export Citation Format

Share Document