scholarly journals The Formation of Small-Scale Atmospheric Vortices via Baroclinic Horizontal Shearing Instability

2016 ◽  
Vol 73 (5) ◽  
pp. 2085-2104 ◽  
Author(s):  
Michael S. Buban ◽  
Conrad L. Ziegler
Keyword(s):  
Shear Zone ◽  
Potential Temperature ◽  
Shear Zones ◽  
Parametric Model ◽  
Small Scale ◽  
Surface Boundary ◽  
Near Surface ◽  
Vertical Vorticity ◽  
Constant Vorticity ◽  
Atmospheric Vortices

Abstract This study presents a series of idealized simulations that attempt to replicate shear zones typical of drylines and other near-surface boundaries in the presence of horizontal virtual density gradients. The series of dry simulations are initialized to contain a north–south-oriented potential temperature gradient collocated with a constant-vorticity shear zone and employ north–south periodic boundary conditions. In all simulations, the shear zones frontogenetically collapse as wavelike perturbations develop that eventually roll up into discrete vortices. Convergence associated with the developing solenoidally forced secondary vertical circulation induces an accumulative shear zone contraction, which in turn increases the vertical vorticity of both the shear zone and the intensifying vortices, owing primarily to stretching that is partially offset by tilting of the vertical vorticity into the horizontal by the secondary circulation. The simulated vortices bear strong morphological resemblance to vortices reported in many earlier laboratory and numerical studies. To assess hypothesized baroclinic effects on the instability mechanism, the present results are compared to a previous study of barotropic horizontal shearing instability (HSI). Linear theory has been modified for the baroclinic cases by introducing a parametric model of frontal contraction, according to which the growth rate expressions incorporate model-prescribed, continuously varying shear zone widths. This modified parametric model is found to provide excellent agreement with the growth rates computed from the present simulations, suggesting that HSI can be extended to the baroclinic shear zone cases to a very good approximation over a range of near-surface boundary types.

scholarly journals The Formation of Small-Scale Atmospheric Vortices via Horizontal Shearing Instability

2016 ◽  
Vol 73 (5) ◽  
pp. 2061-2084 ◽  
Author(s):  
Michael S. Buban ◽  
Conrad L. Ziegler
Keyword(s):  
Shear Zone ◽  
Linear Theory ◽  
Potential Temperature ◽  
Maximum Growth ◽  
Shear Zones ◽  
Small Scale ◽  
Near Surface ◽  
Zone Width ◽  
Constant Vorticity ◽  
Atmospheric Vortices

Abstract Motivated by high-resolution observations of small-scale atmospheric vortices along near-surface boundaries, this study presents a series of idealized simulations that attempt to replicate shear zones typical of drylines and other near-surface boundaries. The series of dry, constant potential temperature simulations are initialized with a north–south-oriented constant-vorticity shear zone and north–south periodic boundary conditions. In all simulations, the shear zones develop wavelike perturbations that eventually roll up into discrete vortices. These vortices have features resembling those observed in many laboratory and numerical studies (i.e., instabilities developed into elliptical cores connected by vorticity braids that precess and contain pressure minima in their centers). To assess the instability mechanism, the results are compared to linear theory. Excellent agreement is found between predictions from linear theory for the wavenumber of maximum growth as a function of shear zone width and growth rate as a function of shear zone vorticity, suggesting to a very good first approximation, horizontal shearing instability (HSI) is responsible for the growth of initial small perturbations. It is also found that predictions of linear theory tend to extend well into the nonlinear regime. Finally, preferred regions of cumulus formation are assessed by including moisture in four simulations. Maximum updrafts and simulated cumuli tend to form along the periphery of cores and/or along the braided regions adjacent to the cores. Because of the important modulating effect of misocyclone development via HSI and subsequent moisture transport, cumulus spacing and size/depth are also dependent on the shear zone width and vorticity.

Regional setting and kinematic features of the Needle Falls Shear Zone, Trans-Hudson Orogen

1993 ◽  
Vol 30 (7) ◽  
pp. 1338-1354 ◽  
Author(s):  
Mel R. Stauffer ◽  
John F. Lewry
Keyword(s):  
Shear Zone ◽  
Simple Shear ◽  
Country Rock ◽  
Shear Zones ◽  
Small Scale ◽  
Lake Zone ◽  
Shear Sense ◽  
Regional Tectonic ◽  
Ductile Shear ◽  
Shear Sense Indicators

Needle Falls Shear Zone is the southern part of a major northeast-trending ductile shear system within the Paleoproterozoic Trans-Hudson Orogen in Saskatchewan. Throughout its exposed length of ~400 km, the shear zone separates reworked Archean continental crust and infolded Paleoproterozoic supracrustals of the Cree Lake Zone, to the northwest, from mainly juvenile Paleoproterozoic arc terrains and granitoid plutons of the Reindeer Zone, to the southeast. It also defines the northwest margin of the ca. 1855 Ma Wathaman Batholith, which forms the main protolith to shear zone mylonites. Although not precisely dated, available age constraints suggest that the shear zone formed between ca. 1855 and 1800 Ma, toward the end of peak thermotectonism in this part of the orogen.In the Needle Falls study area, shear zone mylonites exhibit varied, sequentially developed, ductile to brittle fabric features, including C–S fabrics, winged porphyroclasts (especially delta type), small-scale compressional and extensional microfaults ranging from thin ductile shear zones to late brittle faults, early isoclinal and sheath folds, later asymmetric folds related to compressional microfaults, and variably rotated and (or) folded quartz veins. All ductile shear-sense indicators suggest dextral displacement, as do most later ductile–brittle transition and brittle features. In conjunction with a gently north–northeast-plunging extension lineation, such data indicate oblique east-side-up dextral movement across the shear zone. However, preexisting structures in country rock protoliths rotate into the shear zone in a sense contrary to that predicted by ideal dextral simple shear, a feature thought to reflect significant flattening across the shear zone. Other ductile to brittle fabric elements in the mylonites are consistent with general noncoaxial strain, rather than ideal simple shear. Amount of displacement cannot be measured but indirect estimates suggest approximately 40 ± 20 km.The Needle Falls Shear Zone is too small and has developed too late in regional tectonic history to be considered a crustal suture. Rather, it is interpreted as either a late-tectonic oblique collisional structure or as the result of counterclockwise oroclinal rotation of the southern part of the orogen.

scholarly journals Switching deformation mode and mechanisms during subduction of continental crust: a case study from Alpine Corsica

2017 ◽  
Author(s):  
Giancarlo Molli ◽  
Luca Menegon ◽  
Alessandro Malasoma
Keyword(s):  
Shear Zone ◽  
Continental Crust ◽  
Fluid Pressure ◽  
Deformation Mode ◽  
Shear Zones ◽  
Small Scale ◽  
Plastic Shear ◽  
Stick Slip ◽  
Brittle Ductile Transition

Abstract. The switching in deformation mode (from distributed to localized) and mechanisms (viscous versus frictional) represent a relevant issue in the frame of crustal deformation, being also connected with the concept of the brittle-ductile transition and seismogenesis. In subduction environment, switching in deformation mode and mechanisms may be inferred along the subduction interface, in a transition zone between the highly coupled (seismogenic zone) and decoupled deeper aseismic domain (stable slip). On the other hand, the role of brittle precursors in nucleating crystal-plastic shear zones has received more and more consideration being now recognized as fundamental in the localization of deformation and shear zone development, thus representing a case in which switching deformation mode and mechanisms interact and relate to each other. This contribution analyzes an example of a crystal plastic shear zone localized by brittle precursor formed within a host granitic-protomylonite during deformation in subduction-related environment. The studied structures, possibly formed by transient instability associated with fluctuations of pore fluid pressure and episodic strain rate variations may be considered as a small scale example of fault behaviour associated with a cycle of interseismic creep and coseismic rupture or a new analogue for episodic tremors and slow slip structures. Our case-study represents, therefore, a fossil example of association of fault structures related with stick-slip strain accomodation during subduction of continental crust.

scholarly journals Switching deformation mode and mechanisms during subduction of continental crust: a case study from Alpine Corsica

Solid Earth ◽  
2017 ◽  
Vol 8 (4) ◽  
pp. 767-788 ◽  
Author(s):  
Giancarlo Molli ◽  
Luca Menegon ◽  
Alessandro Malasoma
Keyword(s):  
Shear Zone ◽  
Continental Crust ◽  
Ambient Pressure ◽  
Deformation Mode ◽  
Shear Zones ◽  
Small Scale ◽  
Low Grade ◽  
Stick Slip ◽  
Brittle Ductile Transition

Abstract. The switching in deformation mode (from distributed to localized) and mechanisms (viscous versus frictional) represent a relevant issue in the frame of crustal deformation, being also connected with the concept of the brittle–ductile transition and seismogenesis. In a subduction environment, switching in deformation mode and mechanisms and scale of localization may be inferred along the subduction interface, in a transition zone between the highly coupled (seismogenic zone) and decoupled deeper aseismic domain (stable slip). However, the role of brittle precursors in nucleating crystal-plastic shear zones has received more and more consideration being now recognized as fundamental in some cases for the localization of deformation and shear zone development, thus representing a case in which switching deformation mechanisms and scale and style of localization (deformation mode) interact and relate to each other. This contribution analyses an example of a millimetre-scale shear zone localized by brittle precursor formed within a host granitic protomylonite. The studied structures, developed in ambient pressure–temperature (P–T) conditions of low-grade blueschist facies (temperature T of ca. 300 °C and pressure P ≥ 0. 70 GPa) during involvement of Corsican continental crust in the Alpine subduction. We used a multidisciplinary approach by combining detailed microstructural and petrographic analyses, crystallographic preferred orientation by electron backscatter diffraction (EBSD), and palaeopiezometric studies on a selected sample to support an evolutionary model and deformation path for subducted continental crust. We infer that the studied structures, possibly formed by transient instability associated with fluctuations of pore fluid pressure and episodic strain rate variations, may be considered as a small-scale example of fault behaviour associated with a cycle of interseismic creep and coseismic rupture or a new analogue for episodic tremors and slow-slip structures. Our case study represents, therefore, a fossil example of association of fault structures related to stick-slip strain accommodation during subduction of continental crust.

scholarly journals Sensitivity of Central Oklahoma Convection Forecasts to Upstream Potential Vorticity Anomalies during Two Strongly Forced Cases during MPEX

2015 ◽  
Vol 143 (10) ◽  
pp. 4064-4087 ◽  
Author(s):  
Ryan D. Torn ◽  
Glen S. Romine
Keyword(s):  
Potential Vorticity ◽  
Potential Temperature ◽  
Forecast Errors ◽  
Surface Boundary ◽  
Ensemble Forecasts ◽  
Convective Initiation ◽  
Near Surface ◽  
Severe Convection ◽  
Synoptic Forcing

Abstract The role of upstream subsynoptic forecast errors on forecasts of two different central Oklahoma severe convection events (19 and 31 May 2013) characterized by strong synoptic forcing during the Mesoscale Predictability Experiment (MPEX) are evaluated by applying the ensemble-based sensitivity technique to WRF ensemble forecasts with explicit convection. During both cases, the forecast of the timing and intensity of convection over central Oklahoma is modulated by the southward extent of upstream midtropospheric potential vorticity anomalies that are moving through the base of a larger-scale upstream trough but pass by central Oklahoma prior to convective initiation. In addition, the convection forecasts are also sensitive to the position of lower-tropospheric boundaries, such that moving the boundaries in a manner that would lead to increased equivalent potential temperature over central Oklahoma prior to convective initiation leads to more precipitation. Statistical PV inversion and correlation calculations suggest that the midtropospheric PV and near-surface boundary sensitivities are not independent; the winds associated with the PV error can modulate the position of the lower-tropospheric boundary through advection in a manner consistent with the implied sensitivity. As a consequence, it appears that reducing the uncertainty in specific upstream subsynoptic features prior to convective initiation could improve subsequent forecasts of severe convection.

scholarly journals A Vortical Hot Tower Route to Tropical Cyclogenesis

2006 ◽  
Vol 63 (1) ◽  
pp. 355-386 ◽  
Author(s):  
M. T. Montgomery ◽  
M. E. Nicholls ◽  
T. A. Cram ◽  
A. B. Saunders
Keyword(s):  
Prediction Models ◽  
Weather Prediction ◽  
Convective Available Potential Energy ◽  
Tropical Cyclogenesis ◽  
Small Scale ◽  
Cyclonic Vorticity ◽  
Near Surface ◽  
Vertical Vorticity ◽  
Tropical Depression ◽  
Mesoscale Convective

Abstract A nonhydrostatic cloud model is used to examine the thermomechanics of tropical cyclogenesis under realistic meteorological conditions. Observations motivate the focus on the problem of how a midtropospheric cyclonic vortex, a frequent by-product of mesoscale convective systems during summertime conditions over tropical oceans, may be transformed into a surface-concentrated (warm core) tropical depression. As a first step, the vortex transformation is studied in the absence of vertical wind shear or zonal flow. Within the cyclonic vorticity-rich environment of the mesoscale convective vortex (MCV) embryo, the simulations demonstrate that small-scale cumulonimbus towers possessing intense cyclonic vorticity in their cores [vortical hot towers (VHTs)] emerge as the preferred coherent structures. The VHTs acquire their vertical vorticity through a combination of tilting of MCV horizontal vorticity and stretching of MCV and VHT-generated vertical vorticity. Horizontally localized and exhibiting convective lifetimes on the order of 1 h, VHTs overcome the generally adverse effects of downdrafts by consuming convective available potential energy in their local environment, humidifying the middle and upper troposphere, and undergoing diabatic vortex merger with neighboring towers. During metamorphosis, the VHTs vortically prime the mesoscale environment and collectively mimic a quasi-steady diabatic heating rate within the MCV embryo. A quasi-balanced toroidal (transverse) circulation develops on the system scale that converges cyclonic vorticity of the initial MCV and small-scale vorticity anomalies generated by subsequent tower activity. The VHTs are found to accelerate the spinup of near-surface mean tangential winds relative to an approximate axisymmetric model that excises the VHTs. This upscale growth mechanism appears capable of generating a tropical depression vortex on time scales on the order of 1–2 days, for reasonable parameter choices. Further tests of the VHT paradigm are advocated through diagnoses of operational weather prediction models, higher resolution simulations of the current configuration, examination of disruption scenarios for incipient vortices, and a meteorological field experiment.

Three-dimensional seismic tomographic imaging beneath the Sea of Marmara: evidence for locked and creeping sections of the Main Marmara Fault

2020 ◽  
Vol 223 (2) ◽  
pp. 1172-1187
Author(s):  
Adil Tarancıoğlu ◽  
Serdar Özalaybey ◽  
Argun H Kocaoğlu
Keyword(s):  
Seismic Hazard ◽  
Shear Zone ◽  
Large Earthquake ◽  
Shear Zones ◽  
Small Scale ◽  
Central Basin ◽  
Depth Range ◽  
Sea Of Marmara ◽  
Tomographic Images ◽  
Arrival Times

SUMMARY We present 3-D Vp and Vp/Vs tomographic images for depths down to 22 km along with precise earthquake locations beneath the Sea of Marmara using the seismological data sets collected during the Ocean Bottom Seismometer (OBS) experiments conducted in 2001 and 2006. The unique data set collected by 52 OBSs and augmented by 14 land stations include 3852 P and 2643 S arrival times from 434 earthquakes and 4744 P arrival times from 557 air-gun shot records. From the tomographic depth sections and relocated seismicity, we identify two shear zones which are marked by narrow-width (∼10 km), low Vp (4.3–5.3 km s–1) and high Vp/Vs ratio (∼2.0) anomalies coinciding with the surface trace of the Main Marmara Fault (MMF) and extending near vertically from 8 km depth below the basins into the deeper part of the crust. We consider these shear zones to be the strike-slip deformation signature of the MMF at depth. The western shear zone imaged lies between the Western High and the eastern end of the Central Basin including the 60-km-long segment of the MMF and contains higher seismicity and is visible in the 8–22 km depth range. The eastern shear zone, coinciding with the NW–SE trending surface trace of the MMF, is imaged beneath the Çınarcık Basin with lower seismicity and tomographic resolution. Furthermore, these shear zones may contain fractures filled with deep crustal fluids allowing partial aseismic creep. Within these shear zones, we also identify small-scale, high Vp (6 km s–1) anomalies with low seismicity indicative of strong patches of the fault at depth that can be considered as asperities. Between these shear zones, our tomographic images clearly show a central zone that has homogenously high Vp (∼6.0–6.5 km s–1) and low Vp/Vs ratio (∼1.7) over a large area including the 50-km-long central segment of the MMF lying between the eastern end of the Central Basin and western end of the Çınarcık Basin. Thus, we infer that the central MMF is in a locked state based on its high shear strength, low seismicity and a lack of detectable geodetic slip. Furthermore, a large earthquake might not nucleate on the central MMF since it may be strongly locked at the current level of stress loading, and thus it may behave as a seismic barrier or anti-asperity. On the other hand, the central MMF is a good candidate for a supershear rupture because it has nearly uniform elastic properties and low background seismicity indicating the homogeneity of friction and pre-stress across the fault, which are presented as the main characteristics of supershear fault ruptures. From the seismic hazard perspective, we speculate that a large earthquake may be expected to nucleate within either of the imaged shear zones with the possibility of the central MMF acting as a seismic barrier to stop or to join the rupture in a supershear mode. The imaged features have important implications for various aspects of seismic hazard and crustal dynamics in the Sea of Marmara region.

Sensitivity of an Ocean General Circulation Model to a Parameterization of Near-Surface Eddy Fluxes

2008 ◽  
Vol 21 (6) ◽  
pp. 1192-1208 ◽  
Author(s):  
Gokhan Danabasoglu ◽  
Raffaele Ferrari ◽  
James C. McWilliams
Keyword(s):  
Boundary Layer ◽  
Transition Layer ◽  
General Circulation ◽  
Potential Temperature ◽  
Ocean Surface ◽  
Surface Boundary ◽  
Depth Range ◽  
Climate System Model ◽  
Near Surface ◽  
The Impact

Abstract A simplified version of the near-boundary eddy flux parameterization developed recently by Ferrari et al. has been implemented in the NCAR Community Climate System Model (CCSM3) ocean component for the surface boundary only. This scheme includes the effects of diabatic mesoscale fluxes within the surface layer. The experiments with the new parameterization show significant improvements compared to a control integration that tapers the effects of the eddies as the surface is approached. Such surface tapering is typical of present implementations of eddy transport in some current ocean models. The comparison is also promising versus available observations and results from an eddy-resolving model. These improvements include the elimination of strong, near-surface, eddy-induced circulations and a better heat transport profile in the upper ocean. The experiments with the new scheme also show reduced abyssal cooling and diminished trends in the potential temperature drifts. Furthermore, the need for any ad hoc, near-surface taper functions is eliminated. The impact of the new parameterization is mostly associated with the modified eddy-induced velocity treatment near the surface. The new parameterization acts in the depth range exposed to enhanced turbulent mixing at the ocean surface. This depth range includes the actively turbulent boundary layer and a transition layer underneath, composed of waters intermittently exposed to mixing. The mixed layer, that is, the regions of weak stratification at the ocean surface, is found to be a good proxy for the sum of the boundary layer depth and transition layer thickness.

scholarly journals Inference of Marine Atmospheric Boundary Layer Moisture and Temperature Structure Using Airborne Lidar and Infrared Radiometer Data

1998 ◽  
Vol 37 (3) ◽  
pp. 308-324 ◽  
Author(s):  
Stephen P. Palm ◽  
Denise Hagan ◽  
Geary Schwemmer ◽  
S. H. Melfi
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Potential Temperature ◽  
Airborne Lidar ◽  
Temperature Structure ◽  
Marine Atmospheric Boundary Layer ◽  
Space Technology ◽  
Near Surface ◽  
Surface Moisture ◽  
Infrared Radiometer

Abstract A new technique for retrieving near-surface moisture and profiles of mixing ratio and potential temperature through the depth of the marine atmospheric boundary layer (MABL) using airborne lidar and multichannel infrared radiometer data is presented. Data gathered during an extended field campaign over the Atlantic Ocean in support of the Lidar In-space Technology Experiment are used to generate 16 moisture and temperature retrievals that are then compared with dropsonde measurements. The technique utilizes lidar-derived statistics on the height of cumulus clouds that frequently cap the MABL to estimate the lifting condensation level. Combining this information with radiometer-derived sea surface temperature measurements, an estimate of the near-surface moisture can be obtained to an accuracy of about 0.8 g kg−1. Lidar-derived statistics on convective plume height and coverage within the MABL are then used to infer the profiles of potential temperature and moisture with a vertical resolution of 20 m. The rms accuracy of derived MABL average moisture and potential temperature is better than 1 g kg−1 and 1°C, respectively. The method relies on the presence of a cumulus-capped MABL, and it was found that the conditions necessary for use of the technique occurred roughly 75% of the time. The synergy of simple aerosol backscatter lidar and infrared radiometer data also shows promise for the retrieval of MABL moisture and temperature from space.

scholarly journals The Dabie Extensional Tectonic System: Structural Framework

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Quanlin Hou ◽  
Hongyuan Zhang ◽  
Qing Liu ◽  
Jun Li ◽  
Yudong Wu
Keyword(s):  
Shear Zone ◽  
Shear Zones ◽  
Ultrahigh Pressure ◽  
Metamorphic Complex ◽  
The South ◽  
Magma Intrusion ◽  
The North ◽  
Extensional Tectonic ◽  
Mechanism Transition ◽  
Tectonic System

A previous study of the Dabie area has been supposed that a strong extensional event happened between the Yangtze and North China blocks. The entire extensional system is divided into the Northern Dabie metamorphic complex belt and the south extensional tectonic System according to geological and geochemical characteristics in our study. The Xiaotian-Mozitan shear zone in the north boundary of the north system is a thrust detachment, showing upper block sliding to the NNE, with a displacement of more than 56 km. However, in the south system, the shearing direction along the Shuihou-Wuhe and Taihu-Mamiao shear zones is tending towards SSE, whereas that along the Susong-Qingshuihe shear zone tending towards SW, with a displacement of about 12 km. Flinn index results of both the north and south extensional systems indicate that there is a shear mechanism transition from pure to simple, implying that the extensional event in the south tectonic system could be related to a magma intrusion in the Northern Dabie metamorphic complex belt. Two 40Ar-39Ar ages of mylonite rocks in the above mentioned shear zones yielded, separately, ~190 Ma and ~124 Ma, referring to a cooling age of ultrahigh-pressure rocks and an extensional era later.

Sign in / Sign up

Export Citation Format

Share Document