Sustainable mineral coating of alkali-resistant glass fibres in textile-reinforced mortar composites for structural purposes

2019 ◽  
Vol 53 (28-30) ◽  
pp. 4203-4213 ◽  
Author(s):  
Cesare Signorini ◽  
Andrea Nobili ◽  
Cristina Siligardi
Keyword(s):  
Mechanical Performance ◽  
Sol Gel ◽  
Mineralogical Composition ◽  
Tensile Tests ◽  
Image Correlation ◽  
Axial Tensile ◽  
Nano Coating ◽  
Bonding Properties ◽  
Textile Reinforced Composite

The mechanical performance of a silica-based mineral nano-coating applied to alkali-resistant glass textile-reinforced composite materials aimed at structural strengthening is investigated experimentally. The silica nano-film is directly applied to the alkali-resistant glass fabric by sol–gel deposition. Two lime mortars are adopted as embedding matrix, which differ by the ultimate compressive strength and elongation. Uni-axial tensile tests of prismatic coupons are carried out according to the ICC AC434 guidelines. Remarkable strength and ductility enhancements could be observed in the silica-coated group, as compared to the uncoated group, for both mortar types. Digital image correlation, electron scanning and optical microscopy provide evidence of improved interphase strength. X-ray diffraction of the anhydrous mortars brings out the role of the mineralogical composition of the embedding media on the overall bonding properties of the composites. Consideration of design limits and energy dissipation capabilities reveals the crucial role of matrix ductility in bringing the contribution of interphase enhancement to full effect. We conclude that best performance requires optimizing the pairing between fabric-to-matrix adhesion and matrix ductility.

scholarly journals Prestressing Effect of Shape Memory Alloy Reinforcements Under Serviceability Tensile Loads

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 101
Author(s):  
Markus Beßling ◽  
Christoph Czaderski ◽  
Jeanette Orlowsky
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Concrete Specimen ◽  
Tensile Tests ◽  
Image Correlation ◽  
Repair Work ◽  
Existing Building ◽  
Axial Tensile ◽  
Cracking Process ◽  
Steel Rebars

Repairing and strengthening of existing aged steel-reinforced concrete structures is a major challenge. Today, much of the repair work completed is insufficient and brittle. A promising new solution for repair and strengthening tasks is the use of iron-based shape memory alloy (Fe-SMA). The pre-strained Fe-SMA components enable the pre-stressing of existing building components due to the heat-triggered contraction of the steel. Thus, deflections can be reduced or even recovered. In addition, the cracking process can be adapted, and an improvement in the load, under which the first crack appears, is possible. In this paper, the effects of pre-stress generated by activated Fe-SMA rebars, which were centrally embedded inside of a concrete specimen, are shown. The objective of the study is to quantify the improvement in the loads of the first crack and show the influences of the pre-stressing on the load-bearing behavior and the cracking process. For this purpose, axial tensile tests were performed on concrete bars with height, width, and length of 50 mm, 70 mm, and 900 mm, respectively. These were compared to usual construction steel rebars, pre-strained but nonactivated Fe-SMA rebars, and activated Fe-SMA steel rebars. The evaluation of crack patterns and openings was done using digital image correlation (DIC). The pre-stressing of the concrete causes an increase in the first crack loads of more than 150%, which indicates a clear improvement in the state of serviceability limit.

scholarly journals Performance of Friction Stir Welded Tailor Welded Blanks in AA5059 and AA6082 Alloys for Marine Applications

2016 ◽  
Vol 710 ◽  
pp. 91-96
Author(s):  
Eduardo E. Feistauer ◽  
Luciano Bergmann ◽  
Jorge Fernandez Dos Santos
Keyword(s):  
Rotational Speed ◽  
Mechanical Performance ◽  
Local Strain ◽  
Tensile Tests ◽  
Image Correlation ◽  
Friction Stir ◽  
Tailor Welded Blanks ◽  
Weld Properties ◽  
Static Tensile ◽  
Marine Applications

Tailor welded blank (TWB) concepts in aluminum alloys, welded by friction stir welding (FSW), are an attractive solution to reduce structural weight of structures applied on the transportation sector. In the present work the mechanical performance and microstructural features of dissimilar friction stir welded TWBs were assessed. Welds were produced with alloys of particular interest to the shipbuilding sector (AA6082 and AA5083, with a thickness combination of 6 and 8 mm respectively) and the effect of rotational speed on the weld properties was investigated. A digital image correlation system (DIC) was used to characterize the local strain fields during the quasi-static tensile tests. Microstructure analysis revealed the presence of a remnant oxide line (ROL) at the stir zone. Moreover, the rotational speed directly affected the ROL distribution and consequently the mechanical properties of the welds. The TWB produced with low rotation speed and high force (600 rpm and 20kN) has shown the highest mechanical performance and failed at the thermo-mechanical affected zone of the AA6082 plate. The micromechanisms of fracture were assessed by SEM and revealed a ductile fracture with large amounts of dimples spread out on the fracture surface.

The Mechanical Performance of Carbon Fibres- Addressing the Role of Microstructure

2019 ◽  
Author(s):  
Peter Peter ◽  
Claudia Creighton ◽  
David Fox ◽  
Pablo Mota Santiago ◽  
Adrian Hawley ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Carbon Fibres

scholarly journals Wastes from Agricultural Silage Film Recycling Line as a Potential Polymer Materials

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1383
Author(s):  
Jerzy Korol ◽  
Aleksander Hejna ◽  
Klaudiusz Wypiór ◽  
Krzysztof Mijalski ◽  
Ewelina Chmielnicka
Keyword(s):  
Vinyl Acetate ◽  
Thermal Performance ◽  
Mechanical Performance ◽  
Ethylene Vinyl Acetate ◽  
Tensile Tests ◽  
Solid Particles ◽  
Polymer Materials ◽  
Slight Reduction ◽  
Scanning Calorimetry ◽  
Crystallinity Degree

The recycling of plastics is currently one of the most significant industrial challenges. Due to the enormous amounts of plastic wastes generated by various industry branches, it is essential to look for potential methods for their utilization. In the presented work, we investigated the recycling potential of wastes originated from the agricultural films recycling line. Their structure and properties were analyzed, and they were modified with 2.5 wt % of commercially available compatibilizers. The mechanical and thermal performance of modified wastes were evaluated by tensile tests, thermogravimetric analysis, and differential scanning calorimetry. It was found that incorporation of such a small amount of modifiers may overcome the drawbacks caused by the presence of impurities. The incorporation of maleic anhydride-grafted compounds enhanced the tensile strength of wastes by 13–25%. The use of more ductile compatibilizers—ethylene-vinyl acetate and paraffin increased the elongation at break by 55–64%. The presence of compatibilizers also reduced the stiffness of materials resulting from the presence of solid particles. It was particularly emphasized for styrene-ethylene-butadiene-styrene and ethylene-vinyl acetate copolymers, which caused up to a 20% drop of Young’s modulus. Such effects may facilitate the further applications of analyzed wastes, e.g., in polymer film production. Thermal performance was only slightly affected by compatibilization. It caused a slight reduction in polyethylene melting temperatures (up to 2.8 °C) and crystallinity degree (up to 16%). For more contaminated materials, the addition of compatibilizers caused a minor reduction in the decomposition onset (up to 6 °C). At the same time, for the waste after three washing cycles, thermal stability was improved. Moreover, depending on the desired properties and application, materials do not have to go through the whole recycling line, simplifying the process, reducing energy and water consumption. The presented results indicate that it is possible to efficiently use the materials, which do not have to undergo the whole recycling process. Despite the presence of impurities, they could be applied in the manufacturing of products which do not require exceptional mechanical performance.

scholarly journals Chemical and physical interactions of regenerated cellulose yarns and isocyanate-based matrix systems

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Bernhard Ungerer ◽  
Ulrich Müller ◽  
Antje Potthast ◽  
Enrique Herrero Acero ◽  
Stefan Veigel
Keyword(s):  
Mechanical Performance ◽  
Tensile Force ◽  
Tensile Modulus ◽  
Tensile Tests ◽  
Size Exclusion ◽  
Regenerated Cellulose ◽  
Hydrolytic Cleavage ◽  
Yarn Twist ◽  
Exclusion Chromatography ◽  
Physical And Chemical

AbstractIn the development of structural composites based on regenerated cellulose filaments, the physical and chemical interactions at the fibre-matrix interphase need to be fully understood. In the present study, continuous yarns and filaments of viscose (rayon) were treated with either polymeric diphenylmethane diisocyanate (pMDI) or a pMDI-based hardener for polyurethane resins. The effect of isocyanate treatment on mechanical yarn properties was evaluated in tensile tests. A significant decrease in tensile modulus, tensile force and elongation at break was found for treated samples. As revealed by size exclusion chromatography, isocyanate treatment resulted in a significantly reduced molecular weight of cellulose, presumably owing to hydrolytic cleavage caused by hydrochloric acid occurring as an impurity in pMDI. Yarn twist, fibre moisture content and, most significantly, the chemical composition of the isocyanate matrix were identified as critical process parameters strongly affecting the extent of reduction in mechanical performance. To cope with the problem of degradative reactions an additional step using calcium carbonate to trap hydrogen ions is proposed.

scholarly journals Mechanical Optimization of Concrete with Recycled PET Fibres Based on a Statistical-Experimental Study

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 240
Author(s):  
Alejandro Meza ◽  
Pablo Pujadas ◽  
Laura Montserrat Meza ◽  
Francesc Pardo-Bosch ◽  
Rubén D. López-Carreño
Keyword(s):  
Reinforced Concrete ◽  
Aspect Ratio ◽  
Mechanical Performance ◽  
Tensile Tests ◽  
Superior Performance ◽  
Fibre Reinforced Concrete ◽  
Marine Fauna ◽  
Recycled Pet ◽  
Pet Bottles ◽  
Fibre Aspect Ratio

Discarded polyethylene terephthalate (PET) bottles have damaged our ecosystem. Problems of marine fauna conservation and land fertility have been related to the disposal of these materials. Recycled fibre is an opportunity to reduce the levels of waste in the world and increase the mechanical performance of the concrete. PET as concrete reinforcement has demonstrated ductility and post-cracking strength. However, its performance could be optimized. This study considers a statistical-experimental analysis to evaluate recycled PET fibre reinforced concrete with various fibre dose and aspect ratio. 120 samples were experimented under workability, compressive, flexural, and splitting tensile tests. The results pointed out that the fibre dose has more influence on the responses than its fibre aspect ratio, with statistical relation on the tensional toughness, equivalent flexural strength ratio, volumetric weight, and the number of fibres. Moreover, the fibre aspect ratio has a statistical impact on the tensional toughness. In general, the data indicates that the optimal recycled PET fibre reinforced concrete generates a superior performance than control samples, with an improvement similar to those reinforced with virgin fibres.

scholarly journals Effect of Crystallographic Orientation and Grain Boundaries on Martensitic Transformation and Superelastic Response of Oligocrystalline Fe–Mn–Al–Ni Shape Memory Alloys

2021 ◽  
Author(s):  
A. Bauer ◽  
M. Vollmer ◽  
T. Niendorf
Keyword(s):  
Martensitic Transformation ◽  
Grain Boundary ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Grain Boundaries ◽  
Tensile Tests ◽  
Image Correlation ◽  
Stress Concentrations ◽  
Grain Orientations ◽  
High Degree

AbstractIn situ tensile tests employing digital image correlation were conducted to study the martensitic transformation of oligocrystalline Fe–Mn–Al–Ni shape memory alloys in depth. The influence of different grain orientations, i.e., near-〈001〉 and near-〈101〉, as well as the influence of different grain boundary misorientations are in focus of the present work. The results reveal that the reversibility of the martensite strongly depends on the type of martensitic evolving, i.e., twinned or detwinned. Furthermore, it is shown that grain boundaries lead to stress concentrations and, thus, to formation of unfavored martensite variants. Moreover, some martensite plates seem to penetrate the grain boundaries resulting in a high degree of irreversibility in this area. However, after a stable microstructural configuration is established in direct vicinity of the grain boundary, the transformation begins inside the neighboring grains eventually leading to a sequential transformation of all grains involved.

scholarly journals Strength Enhancement of Superduplex Stainless Steel Using Thermomechanical Processing

Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1094
Author(s):  
M. A. Lakhdari ◽  
F. Krajcarz ◽  
J. D. Mithieux ◽  
H. P. Van Landeghem ◽  
M. Veron
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Thermomechanical Processing ◽  
Tensile Tests ◽  
Image Correlation ◽  
Strength Enhancement ◽  
Industrial Material ◽  
Superduplex Stainless Steel ◽  
The Impact ◽  
Strength Improvement

The impact of microstructure evolution on mechanical properties in superduplex stainless steel UNS S32750 (EN 1.4410) was investigated. To this end, different thermomechanical treatments were carried out in order to obtain clearly distinct duplex microstructures. Optical microscopy and scanning electron microscopy, together with texture measurements, were used to characterize the morphology and the preferred orientations of ferrite and austenite in all microstructures. Additionally, the mechanical properties were assessed by tensile tests with digital image correlation. Phase morphology was not found to significantly affect the mechanical properties and neither were phase volume fractions within 13% of the 50/50 ratio. Austenite texture was the same combined Goss/Brass texture regardless of thermomechanical processing, while ferrite texture was mainly described by α-fiber orientations. Ferrite texture and average phase spacing were found to have a notable effect on mechanical properties. One of the original microstructures of superduplex stainless steel obtained here shows a strength improvement by the order of 120 MPa over the industrial material.

Sign in / Sign up

Export Citation Format

Share Document