The effect of physical parameters on sound absorption properties of natural fiber mixed nonwoven composites

2012 ◽  
Vol 82 (20) ◽  
pp. 2043-2053 ◽  
Author(s):  
Merve Küçük ◽  
Yasemin Korkmaz
Keyword(s):  
Absorption Coefficient ◽  
High Frequency ◽  
Sound Absorption ◽  
Natural Fiber ◽  
Unit Area ◽  
Air Permeability ◽  
Physical Parameters ◽  
Fiber Types ◽  
Absorption Properties ◽  
Nonwoven Fabrics

In this study, the effects of physical parameters on sound absorption properties of nonwoven fabrics were investigated. Eight different nonwoven composites including different fiber types mixed with different ratios were tested. Along with sound absorption properties, thickness, weight per area, and air permeability parameters of the samples were measured. The increase in thickness and the decrease in air permeability results in an increase in sound absorption properties of the material. The samples including 70% cotton and 30% polyester resulted in the best sound absorption coefficient in the mid-to-high frequency ranges. The increase in the amount of fiber per unit area resulted in an increase in sound absorption of the material. Addition of acrylic and polypropylene into a cotton and polyester fiber mixture increased the sound absorption properties of the composite in the low and mid-frequency ranges also.

Sound-Absorbing Properties of Kapok Fiber Nonwoven Composite at Low-Frequency

2013 ◽  
Vol 821-822 ◽  
pp. 329-332 ◽  
Author(s):  
Xue Ting Liu ◽  
Li Li ◽  
Xiong Yan ◽  
Hui Ping Zhang
Keyword(s):  
Bulk Density ◽  
Sound Absorption ◽  
Natural Fiber ◽  
Low Frequency ◽  
Polyester Fiber ◽  
Physical Parameters ◽  
Absorption Properties ◽  
Kapok Fiber ◽  
Absorbing Materials ◽  
Properties Of Composites

More and more concern for environmental problems has led public to use natural and environmentally benign sound-absorbing materials. In this study, the sound-absorbing nonwoven composites based on kapok fiber and hollow polyester fiber were developed and sound absorption properties of kapok fiber nonwoven composites were investigated in the low frequency region of 100-500 Hz using the impedance tube method. The poor sound-absorbing at low-frequency is one of the difficult problems that urgently need to be solved in fibrous sound-absorbing materials. The effects of physical parameters, including bulk density and thickness, and depth of back cavity on sound absorption properties of composites were studied. Increasing of the bulk density, thickness and depth of back cavity is contribute to improve sound absorption properties of composites at low frequency. The comparisons of kapok fiber with polypropylene (PP) fiber and hollow polyester fiber indicated that as a natural fiber, kapok fiber had a superior acoustical properties at low frequency.

scholarly journals Experimental and Modelling Studies on Thermal Insulation and Sound Absorption Properties of Cross-Laid Nonwoven Fabrics

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Tao Yang ◽  
Lizhu Hu ◽  
Xiaoman Xiong ◽  
Michal Petrů ◽  
Sundaramoorthy Palanisamy ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Absorption Coefficient ◽  
Thermal Insulation ◽  
Sound Absorption ◽  
Nonwoven Fabric ◽  
Sound Absorption Coefficient ◽  
Absorption Properties ◽  
Nonwoven Fabrics ◽  
Significant Difference ◽  
Modelling Studies

Abstract Nonwoven fabrics are widely used for thermal insulation and sound absorption purpose in construction and automobile fields. It is essential to investigate their thermal conductivity and sound absorption coefficient. Five cross-laid nonwoven fabrics are measured on the Alambeta device and Brüel & Kjær impedance tube. Bogaty and Bhattacharyya models are selected to predict the thermal conductivity, and Voronina and Miki models are used to predict the sound absorption coefficient. The predicted thermal conductivity shows a significant difference compared with the measured values. It is concluded that Bogaty and Bhattacharyya models are not suitable for high porous nonwoven fabric. In addition, the results of Voronina and Miki models for sound absorption prediction are acceptable, but Voronina model shows lower mean prediction error compared with Miki model. The results indicate that Voronina model can be used to predict the sound absorption of cross-laid nonwoven fabric.

scholarly journals Acoustic Panels Made of Paper Sludge and Clay Composites

2021 ◽  
Vol 13 (2) ◽  
pp. 637
Author(s):  
Tomas Astrauskas ◽  
Tomas Januševičius ◽  
Raimondas Grubliauskas
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Composite Panel ◽  
Sound Absorption Coefficient ◽  
Core Material ◽  
Paper Sludge ◽  
Frequency Range ◽  
Absorption Properties ◽  
Air Gaps ◽  
The Core

Studies on recycled materials emerged during recent years. This paper investigates samples’ sound absorption properties for panels fabricated of a mixture of paper sludge (PS) and clay mixture. PS was the core material. The sound absorption was measured. We also consider the influence of an air gap between panels and rigid backing. Different air gaps (50, 100, 150, 200 mm) simulate existing acoustic panel systems. Finally, the PS and clay composite panel sound absorption coefficients are compared to those for a typical commercial absorptive ceiling panel. The average sound absorption coefficient of PS-clay composite panels (αavg. in the frequency range from 250 to 1600 Hz) was up to 0.55. The resulting average sound absorption coefficient of panels made of recycled (but unfinished) materials is even somewhat higher than for the finished commercial (finished) acoustic panel (αavg. = 0.51).

Research of Possibilities of Using the Recycled Materials Based on Rubber and Textiles Combined with Vermiculite Material in the Area of ​​Noise Reduction

2014 ◽  
Vol 1001 ◽  
pp. 171-176 ◽  
Author(s):  
Pavol Liptai ◽  
Marek Moravec ◽  
Miroslav Badida
Keyword(s):  
Absorption Coefficient ◽  
Standing Wave ◽  
Sound Pressure Level ◽  
Sound Absorption ◽  
Sound Pressure ◽  
Sound Level ◽  
Pressure Level ◽  
Sound Absorption Coefficient ◽  
Physical Parameters ◽  
Materials Research

This paper describes possibilities in the use of recycled rubber granules and textile materials combined with vermiculite panel. The aim of the research is the application of materials that will be absorbing or reflecting sound energy. This objective is based on fundamental physical principles of materials research and acoustics. Method of measurement of sound absorption coefficient is based on the principle of standing wave in the impedance tube. With a sound level meter is measured maximum and minimum sound pressure level of standing wave. From the maximum and minimum sound pressure level of standing wave is calculated sound absorption coefficient αn, which can take values from 0 to 1. Determination of the sound absorption coefficient has been set in 1/3 octave band and in the frequency range from 50 Hz to 2000 Hz. In conclusion are proposed possibilities of application of these materials in terms of their mechanical and physical parameters.

scholarly journals Development of Needle-Punched Nonwoven Fabrics from Reclaimed Fibers for Air Filtration Applications

2014 ◽  
Vol 9 (1) ◽  
pp. 155892501400900 ◽  
Author(s):  
S. Sakthivel ◽  
Anban J.J. Ezhil ◽  
T. Ramachandran
Keyword(s):  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Air Permeability ◽  
Filtration Efficiency ◽  
Raw Material ◽  
Fine Tuning ◽  
Physical Parameters ◽  
Air Filtration ◽  
Nonwoven Fabrics

This paper reports an investigative study on the fabrication and measurement of the air permeability, mechanical properties, pore size distribution, and filtration efficiency of different nonwoven fabrics produced from reclaimed fibers by analytically changing the machine variables to manipulate the physical parameters of the nonwoven fabrics. Reclaimed fiber of cotton (60%) and polyester (40%) blend was used, so that the prospect of value addition to an inexpensive source of raw material could be explored. The changes in air permeability were interpreted in terms of fabric density profile and pore size distribution. The filtration parameters of filtration efficiency, dust holding capacity, and pressure drop were also calculated. Additionally, the effects of calendering on pore size and filtration properties were evaluated to discover the opportunity of fine-tuning and the performance of the filters. The outcome in this study reflected an overall development in all filtration characteristics due to the calendering operation.

Sound Absorption Characteristics of a Single Micro-Perforated Panel Backed by a Natural Fiber Absorber Material

2020 ◽  
Vol 307 ◽  
pp. 291-296 ◽  
Author(s):  
Meifal Rusli ◽  
Fakhrur Rahman ◽  
Hendery Dahlan ◽  
Gusriwandi ◽  
Mulyadi Bur
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Absorption Characteristic ◽  
Coconut Fiber ◽  
Single Leaf ◽  
Absorber Material ◽  
Resonance Absorber ◽  
Absorption Characteristics

A micro-perforated panel (MPP) works as a Helmholtz-type resonance absorber formed by an air-gab cavity in order to minimize the reflected sound effectively at a selective resonance frequency. Furthermore, the use of natural fibers as sound absorbing materials recently has attracted more attention because it is completely biodegradable, environmental friendly and more economical. In this paper, the combination of MPP and natural fiber as sound absorptive material is investigated. The MPP is made of a transparent acrylic board with 1.5 mm thickness and backed by a coconut fiber panel. The effect of the fiber panel that inserted in the air-gab cavity to the sound absorption characteristic of a single leaf MPP is observed. Sound absorption coefficient is measured by transfer function method using two microphones-impedance tube. It is found that the sandwich model of MPP backed by a coconut fiber changes the sound absorption characteristics of MPP by shifting the maximum absorption coefficient into the lower frequency and making a wider band of frequency absorption. Moreover, the air-gab cavity between MPP and fiber panel give fewer contribution to construct the MPP frequency resonant than the natural fiber panel one.

scholarly journals Acoustic, Mechanical and Thermal Properties of Green Composites Reinforced with Natural Fibers Waste

Polymers ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 654 ◽  
Author(s):  
Tufail Hassan ◽  
Hafsa Jamshaid ◽  
Rajesh Mishra ◽  
Muhammad Qamar Khan ◽  
Michal Petru ◽  
...  
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Natural Fiber ◽  
Coefficient Of Thermal Expansion ◽  
The Other ◽  
Fiber Reinforced Composites ◽  
Sound Absorption Coefficient ◽  
Mechanical And Thermal Properties ◽  
Reinforced Composites ◽  
Fiber Reinforced

The use of acoustic panels is one of the most important methods for sound insulation in buildings. Moreover, it has become increasingly important to use green/natural origin materials in this area to reduce environmental impact. This study focuses on the investigation of acoustic, mechanical and thermal properties of natural fiber waste reinforced green epoxy composites. Three different types of fiber wastes were used, e.g., cotton, coconut and sugarcane with epoxy as the resin. Different fiber volume fractions, i.e., 10%, 15% and 20% for each fiber were used with a composite thickness of 3 mm. The sound absorption coefficient, impact strength, flexural strength, thermal conductivity, diffusivity, coefficient of thermal expansion and thermogravimetric properties of all samples were investigated. It has been found that by increasing the fiber content, the sound absorption coefficient also increases. The coconut fiber-based composites show a higher sound absorption coefficient than in the other fiber-reinforced composites. The impact and flexural strength of the cotton fiber-reinforced composite samples are higher than in other samples. The coefficient of thermal expansion of the cotton fiber-based composite is also higher than the other composites. Thermogravimetric analysis revealed that all the natural fiber-reinforced composites can sustain till 300 °C with a minor weight loss. The natural fiber-based composites can be used in building interiors, automotive body parts and household furniture. Such composite development is an ecofriendly approach to the acoustic world.

Physical and Sound Absorption Properties of Spent Tea Leaf Fiber Filled Polyurethane Foam Composite

2014 ◽  
Vol 660 ◽  
pp. 541-546 ◽  
Author(s):  
Qumrul Ahsan ◽  
Chia Pooi Ching ◽  
Mohd Yuhazri bin Yaakob
Keyword(s):  
Absorption Coefficient ◽  
Polyurethane Foam ◽  
High Resistance ◽  
Sound Absorption ◽  
Filler Loading ◽  
Tea Plant ◽  
Sound Absorption Coefficient ◽  
Tea Leaves ◽  
Absorption Properties ◽  
Spent Tea Leaves

Spent tea leaves (STL) from tea producing factories can be considered as new resources for sound absorbing polyurethane (PU) matrix composite materials because STL are rich in polyphenols (tannins) which cause high durability, high resistance to fungal and termites, and high resistance to fire. The research aims to study the physical characteristics of STL and the effect of dispersion morphology of STL on the sound absorption properties of polyurethane foam composites by varying filler loading. Three grades of STL fibers either as received or granulated are used in this study, namely BM-FAE and SWBHE derived from the stalk while FIBER-FAE derived from the leaves of the tea plant. The PU/STL composites are fabricated through open molding method with a fiber loading of 16 wt. %. The fabricated composites are then subjected to physical and sound absorption testing as well as microscopic observations to analyze the distribution of filler in composite. The study shows that as-received FIBER-FAE spent tea leaves provide the best sound absorption coefficient and for composites using granulated fibers from any grade have lower sound absorption coefficient. These results show that a novel kind of sound absorption materials with the recycling of waste materials can be obtained for the solution of noise and environmental pollution.

scholarly journals The Effects of Various Additive Components on the Sound Absorption Performances of Polyurethane Foams

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Shuming Chen ◽  
Yang Jiang ◽  
Jing Chen ◽  
Dengfeng Wang
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Polyurethane Foams ◽  
Acoustic Properties ◽  
Acoustic Absorption ◽  
Absorption Properties ◽  
Maximum Enhancement ◽  
Flexible Polyurethane ◽  
Pu Foams

Flexible polyurethane (PU) foams comprising various additive components were synthesized to improve their acoustic performances. The purpose of this study was to investigate the effects of various additive components of the PU foams on the resultant sound absorption, which was characterized by the impedance tube technique to obtain the incident sound absorption coefficient and transmission loss. The maximum enhancement in the acoustic properties of the foams was obtained by adding fluorine-dichloroethane (141b) and triethanolamine. The results showed that the acoustic absorption properties of the PU foams were improved by adding 141b and triethanolamine and depended on the amount of the water, 141b, and triethanolamine.

The Comparison of Sound Absorption of Kapok-Based Fiber Nonwoven Fabrics

2014 ◽  
Vol 1004-1005 ◽  
pp. 562-565 ◽  
Author(s):  
Xue Ting Liu ◽  
Xiong Yan ◽  
Jie Hong ◽  
Hui Ping Zhang
Keyword(s):  
Sound Absorption ◽  
Function Method ◽  
Natural Fiber ◽  
Frequency Region ◽  
Air Gap ◽  
Polyester Fiber ◽  
Kapok Fiber ◽  
Nonwoven Fabrics ◽  
Transfer Function Method ◽  
Absorbing Materials

As a natural fiber, kapok fiber has the high hollow degree that is very good for sound absorption. Four different kinds of kapok-based fiber nonwoven fabrics, made by kapok fiber mixing with hollow polyester, viscose fiber, PP fiber and cotton fiber respectively, were made and the sound absorption coefficients were measured in the frequency region of 100 - 6300 Hz by using a two-microphone transfer-function method. The comparisons of the sound absorption for four types of materials with similar thickness and densities with no air gap and with 1 cm, 3 cm air gap were made. The results indicate that the sound absorption of kapok/hollow polyester fiber nonwoven fabrics is superior to those of other three ones and kapok/hollow polyester fiber nonwoven fabrics can be used for sound-absorbing materials in engineering.

Sign in / Sign up

Export Citation Format

Share Document